Mein Jin Tan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Mein Jin Tan has a total of 93 co-authors. Here are the top co-authors by number of shared publications:
- Xian Jun Loh
Institute of Materials Research and Engineering (IMRE), Agency for Science, Technology and Research (A*STAR), 2 Fusionopolis Way, Innovis #08-03, Singapore 138634, Republic of Singapore
7 shared publications Vijila Chellappan
Institute of Materials Research and Engineering (IMRE), Agency for Science, Technology and Research (A*STAR), 3 Research Link, 117602, Singapore
4 shared publications- Dan Kai
Institute of Materials Research and Engineering (IMRE), Agency for Science, Technology and Research (A*STAR), 2 Fusionopolis Way, Innovis #08-03, Singapore 138634, Republic of Singapore
3 shared publications - Kien Voon Kong
Department of Chemistry National Taiwan University Taipei 10617 Taiwan
3 shared publications Jun Li
Institute of Materials Research and Engineering, A*STAR Singapore, 3 Research Link, Singapore 117602
2 shared publicationsPei Lin Chee
Institute of Materials Research and Engineering (IMRE), Agency for Science, Technology and Research (A*STAR), Singapore 138634, Singapore
2 shared publications
Latest Publications
- 8 April 2019
- Published by Springer Nature in Nature Biomedical Engineering
- Vol. 3 (8) , 598-610
Retinal-detachment repair and vitreous-like-body reformation via a thermogelling polymer endotamponade
Internal-tamponade agents are crucial surgical adjuncts in vitreoretinal surgery. Clinically used endotamponade agents act through buoyancy forces, yet can result in prolonged post-operative positioning, temporary loss of vision, raised intra-ocular pressure, cataract formation or the need for additional removal surgery. Here, we describe a thermogelling polymer that provides an internal tamponade effect through surface tension and swelling counter-forces. We tested the long-term biocompatibility of the polymer endotamponade in rabbit vitrectomy models, and its surgical efficacy and biocompatibility in a non-human primate retinal-detachment model. We also show that, while the thermogel biodegrades during the three months following surgery, it promotes the reformation of a vitreous-like body that mimics the biophysical properties of the natural vitreous. The thermogelling endotamponade might serve as a long-term vitreous substitute.
- 8 April 2019
- Published by Springer Nature in Nature Biomedical Engineering
- Vol. 3 (8) , 598-610
Retinal-detachment repair and vitreous-like-body reformation via a thermogelling polymer endotamponade
Internal-tamponade agents are crucial surgical adjuncts in vitreoretinal surgery. Clinically used endotamponade agents act through buoyancy forces, yet can result in prolonged post-operative positioning, temporary loss of vision, raised intra-ocular pressure, cataract formation or the need for additional removal surgery. Here, we describe a thermogelling polymer that provides an internal tamponade effect through surface tension and swelling counter-forces. We tested the long-term biocompatibility of the polymer endotamponade in rabbit vitrectomy models, and its surgical efficacy and biocompatibility in a non-human primate retinal-detachment model. We also show that, while the thermogel biodegrades during the three months following surgery, it promotes the reformation of a vitreous-like body that mimics the biophysical properties of the natural vitreous. The thermogelling endotamponade might serve as a long-term vitreous substitute.
- 1 October 2018
- Published by Elsevier in Journal of Power Sources
- Vol. 400, 566-571
Acrylamide-derived freestanding polymer gel electrolyte for flexible metal-air batteries
- 1 October 2018
- Published by Elsevier in Journal of Power Sources
- Vol. 400, 566-571
Acrylamide-derived freestanding polymer gel electrolyte for flexible metal-air batteries
- 15 March 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 6 (17) , 2536-2540
A rapid and highly sensitive strain-effect graphene-based bio-sensor for the detection of stroke and cancer bio-markers
Here, we propose a highly sensitive and rapid bio-sensor for the detection of bio-markers for stroke and cancer-related diseases, based on the utilization of the adsorption properties of ruthenium carbonyl (Ru–CO) clusters on monolayer graphene (MG). A fast rate of decarbonylation of Ru–CO to form ruthenium oxide nanoparticles (RuO2 NPs) on MG was observed. The quantitative detection of matrix metalloproteinase-2 (MMP-2) (bio-marker for stroke and vascular diseases) was demonstrated by tracking the spectral shift of the characteristic G band of graphene caused by the adsorption of RuO2 NPs. A concentration as low as 17 ng mL−1 of MMP-2 was detected in a simulated clinical serum sample. This effective bio-sensor has the potential to revolutionize the biomedical field in the early detection and possible prevention of stroke and cancer diagnosis.
- 15 March 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 6 (17) , 2536-2540
A rapid and highly sensitive strain-effect graphene-based bio-sensor for the detection of stroke and cancer bio-markers
Here, we propose a highly sensitive and rapid bio-sensor for the detection of bio-markers for stroke and cancer-related diseases, based on the utilization of the adsorption properties of ruthenium carbonyl (Ru–CO) clusters on monolayer graphene (MG). A fast rate of decarbonylation of Ru–CO to form ruthenium oxide nanoparticles (RuO2 NPs) on MG was observed. The quantitative detection of matrix metalloproteinase-2 (MMP-2) (bio-marker for stroke and vascular diseases) was demonstrated by tracking the spectral shift of the characteristic G band of graphene caused by the adsorption of RuO2 NPs. A concentration as low as 17 ng mL−1 of MMP-2 was detected in a simulated clinical serum sample. This effective bio-sensor has the potential to revolutionize the biomedical field in the early detection and possible prevention of stroke and cancer diagnosis.
- 12 January 2018
- Published by Wiley in Advanced Healthcare Materials
- Vol. 7 (5)
Flexible Modulation of CO‐Release Using Various Nuclearity of Metal Carbonyl Clusters on Graphene Oxide for Stroke Remediation
Utilizing the size‐dependent adsorption properties of ruthenium carbonyl clusters (Ru–carbon monoxide (CO)) onto graphene oxide (GO), a facile CO‐release platform for in situ vasodilation as a treatment for stroke‐related vascular diseases is developed. The rate and amount of formation of the CO‐release‐active RuII(CO)2 species can be modulated by a simple mixing procedure at room temperature. The subsequent thermally induced oxidation of RuII(CO)2 to RuO2 on the GO surface results in the release of CO. Further modulation of thermal and CO‐release properties can be achieved via a hybridization of medium‐ and high‐nuclearity of Ru–CO clusters that produces a RuO2/RuII(CO)2/6Ru–CO–GO composite, where 6Ru–CO–GO provides a photothermally activated reservoir of RuII(CO)2 species and the combined infrared absorption properties of GO and RuO2 provides photothermal response for in situ CO‐release. The RuO2/RuII(CO)2/6Ru–CO–GO composite does not produce any cytotoxicity and the efficacy of the composite is further demonstrated in a cortical photothrombotic ischemia rat model.
- 12 January 2018
- Published by Wiley in Advanced Healthcare Materials
- Vol. 7 (5)
Flexible Modulation of CO‐Release Using Various Nuclearity of Metal Carbonyl Clusters on Graphene Oxide for Stroke Remediation
Utilizing the size‐dependent adsorption properties of ruthenium carbonyl clusters (Ru–carbon monoxide (CO)) onto graphene oxide (GO), a facile CO‐release platform for in situ vasodilation as a treatment for stroke‐related vascular diseases is developed. The rate and amount of formation of the CO‐release‐active RuII(CO)2 species can be modulated by a simple mixing procedure at room temperature. The subsequent thermally induced oxidation of RuII(CO)2 to RuO2 on the GO surface results in the release of CO. Further modulation of thermal and CO‐release properties can be achieved via a hybridization of medium‐ and high‐nuclearity of Ru–CO clusters that produces a RuO2/RuII(CO)2/6Ru–CO–GO composite, where 6Ru–CO–GO provides a photothermally activated reservoir of RuII(CO)2 species and the combined infrared absorption properties of GO and RuO2 provides photothermal response for in situ CO‐release. The RuO2/RuII(CO)2/6Ru–CO–GO composite does not produce any cytotoxicity and the efficacy of the composite is further demonstrated in a cortical photothrombotic ischemia rat model.
- 1 October 2017
- Published by Elsevier in Biosensors and Bioelectronics
- Vol. 96, 167-172
Metal carbonyl-gold nanoparticle conjugates for highly sensitive SERS detection of organophosphorus pesticides
- 1 October 2017
- Published by Elsevier in Biosensors and Bioelectronics
- Vol. 96, 167-172
Metal carbonyl-gold nanoparticle conjugates for highly sensitive SERS detection of organophosphorus pesticides
- 1 December 2016
- Published by Elsevier in Colloids and Surfaces B: Biointerfaces
- Vol. 148, 557-565
Biocompatible electrically conductive nanofibers from inorganic-organic shape memory polymers
- 1 December 2016
- Published by Elsevier in Colloids and Surfaces B: Biointerfaces
- Vol. 148, 557-565
Biocompatible electrically conductive nanofibers from inorganic-organic shape memory polymers
- Top Cited Papers
- 3 May 2016
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 4 (24) , 5531-5558
Biodegradable electronics: cornerstone for sustainable electronics and transient applications
Electronic devices have become ubiquitous in modern society and are prevalent in every facet of human activities.
- 3 May 2016
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 4 (24) , 5531-5558
Top Cited PapersBiodegradable electronics: cornerstone for sustainable electronics and transient applications
Electronic devices have become ubiquitous in modern society and are prevalent in every facet of human activities.
- 5 April 2016
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 8 (15) , 9533-9539
Thermally Stable and Sterilizable Polymer Transistors for Reusable Medical Devices
We realize a thermally stable polymer thin film transistor (TFT) that is able to endure the standard autoclave sterilization for reusable medical devices. A thermally stable semiconducting polymer poly[4-(4,4-dihexadecyl-4Hcyclopenta[1,2-b:5,4-b]dithiophen-2-yl)-alt[1,2,5]thiadiazolo [3,4c] pyridine], which is stable up to 350 °C in N2 and 200 °C in air, is used as channel layer, whereas the biocompatible SU-8 polymer is used as a flexible dielectric layer, in addition to conventional SiO2 dielectric layer. Encapsulating with in-house designed composite film laminates as moisture barrier, both TFTs using either SiO2 or SU-8 dielectric layer exhibit good stability in sterilized conditions without significant change in mobility and threshold voltage. After sterilization for 30 min in autoclave, the mobility drops only 15%; from as-fabricated mobility of 1.4 and 1.3 cm2 V–1 s–1 to 1.2 and 1.1 cm2 V–1 s–1 for TFTs with SiO2 and SU-8 dielectric layer, respectively. Our TFT design along with experimental results reveal the opportunity on organic/polymer flexible TFTs in sterilizable/reusable medical device application.
- 5 April 2016
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 8 (15) , 9533-9539
Thermally Stable and Sterilizable Polymer Transistors for Reusable Medical Devices
We realize a thermally stable polymer thin film transistor (TFT) that is able to endure the standard autoclave sterilization for reusable medical devices. A thermally stable semiconducting polymer poly[4-(4,4-dihexadecyl-4Hcyclopenta[1,2-b:5,4-b]dithiophen-2-yl)-alt[1,2,5]thiadiazolo [3,4c] pyridine], which is stable up to 350 °C in N2 and 200 °C in air, is used as channel layer, whereas the biocompatible SU-8 polymer is used as a flexible dielectric layer, in addition to conventional SiO2 dielectric layer. Encapsulating with in-house designed composite film laminates as moisture barrier, both TFTs using either SiO2 or SU-8 dielectric layer exhibit good stability in sterilized conditions without significant change in mobility and threshold voltage. After sterilization for 30 min in autoclave, the mobility drops only 15%; from as-fabricated mobility of 1.4 and 1.3 cm2 V–1 s–1 to 1.2 and 1.1 cm2 V–1 s–1 for TFTs with SiO2 and SU-8 dielectric layer, respectively. Our TFT design along with experimental results reveal the opportunity on organic/polymer flexible TFTs in sterilizable/reusable medical device application.
- Top Cited Papers
- 8 January 2016
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 18 (5) , 1175-1200
Towards lignin-based functional materials in a sustainable world
The recent developments of lignin were reviewed in terms of different approaches to synthesize lignin-based copolymers, the resulting features and the potential applications of such copolymers.
- 8 January 2016
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 18 (5) , 1175-1200
Top Cited PapersTowards lignin-based functional materials in a sustainable world
The recent developments of lignin were reviewed in terms of different approaches to synthesize lignin-based copolymers, the resulting features and the potential applications of such copolymers.
- 28 September 2015
- Published by Wiley in Advanced Materials Interfaces
- Vol. 2 (18) , 1500438
Aqueous Metal Oxide Inks for Modifying Electrode Work Function in Polymer Solar Cells
A method to prepare aqueous metal oxide inks for tuning the work function (WF) of electrodes is demonstrated. Thin films prepared from the metal oxide ink based on vanadium oxide (V2O5) nanoparticles are found to increase the WF of an indium‐tin‐oxide (ITO) electrode. ITO substrates modified with V2O5 films are applied as a hole selective layer (HSL) in polymer solar cells (PSCs) using a poly(3‐hexylthiophene) and [6,6]‐phenyl‐C61 butyric acid methyl ester blend as a photoactive layer. The PSCs prepared with V2O5‐modified ITO show better device performance, achieving a power conversion efficiency of 3.6%, demonstrating 15% enhancement compared to conventional ITO/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT‐PSS) based devices. Furthermore, ITO/V2O5‐modified devices exhibit better ambient stability with 60% improvement in device lifetime than those using PEDOT:PSS as an HSL. This solution‐processable and highly stable WF‐modifying metal oxide film can be a potential alternative material for engineering interfaces in optoelectronic devices.
- 28 September 2015
- Published by Wiley in Advanced Materials Interfaces
- Vol. 2 (18) , 1500438
Aqueous Metal Oxide Inks for Modifying Electrode Work Function in Polymer Solar Cells
A method to prepare aqueous metal oxide inks for tuning the work function (WF) of electrodes is demonstrated. Thin films prepared from the metal oxide ink based on vanadium oxide (V2O5) nanoparticles are found to increase the WF of an indium‐tin‐oxide (ITO) electrode. ITO substrates modified with V2O5 films are applied as a hole selective layer (HSL) in polymer solar cells (PSCs) using a poly(3‐hexylthiophene) and [6,6]‐phenyl‐C61 butyric acid methyl ester blend as a photoactive layer. The PSCs prepared with V2O5‐modified ITO show better device performance, achieving a power conversion efficiency of 3.6%, demonstrating 15% enhancement compared to conventional ITO/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT‐PSS) based devices. Furthermore, ITO/V2O5‐modified devices exhibit better ambient stability with 60% improvement in device lifetime than those using PEDOT:PSS as an HSL. This solution‐processable and highly stable WF‐modifying metal oxide film can be a potential alternative material for engineering interfaces in optoelectronic devices.