Niklas von der Assen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Niklas von der Assen has a total of 185 co-authors. Here are the top co-authors by number of shared publications:
- André Bardow
Energy & Process Systems Engineering, Department of Mechanical and Process Engineering, ETH Zurich, Tannenstrasse 3, 8092 Zurich, Switzerland
14 shared publications - Hendrik Schricker
RWTH Aachen University
9 shared publications - Benedikt Nilges
Institute of Technical Thermodynamics, RWTH Aachen University, Aachen, Germany
8 shared publications - Alexander Mitsos
RWTH Aachen University
6 shared publications - Christiane Reinert
RWTH Aachen University
6 shared publications - Jan Marcus Hartmann
RWTH Aachen University
5 shared publications
Latest Publications
- Open Access
- 2 November 2026
- Published by Springer Nature in Research Square
Process-level uncertainties challenge system-level direct air capture assessments
System-level assessments of direct air capture (DAC) commonly rely on individual process models, overlooking the influence of model choice on system-level conclusions. Here, we quantify this impact by integrating weather-dependent performance data from seven solid-sorbent DAC models into an otherwise consistent energy system framework. DAC representation is the largest source of variation in levelized CO2 capture cost, accounting for 43% of the observed variation across the climate-renewable archetypes considered compared with 16% for climate and 6% for renewable-resource configuration. Model-dependent cost differences exceed 1000 € tCO2-1 at individual locations. Different model representations can also reverse siting preferences, substantially alter cost-optimal system design, and determine whether future CO2 capture-cost targets are achieved. Our results further demonstrate how individual process-level assumptions can propagate through the assessment, resulting in a major source of system-level uncertainty. The harmonized DAC performance data developed here enable systematic comparison of alternative DAC representation in future system assessments.
- 2 November 2026
- Published by Springer Nature in Research Square
Open AccessProcess-level uncertainties challenge system-level direct air capture assessments
System-level assessments of direct air capture (DAC) commonly rely on individual process models, overlooking the influence of model choice on system-level conclusions. Here, we quantify this impact by integrating weather-dependent performance data from seven solid-sorbent DAC models into an otherwise consistent energy system framework. DAC representation is the largest source of variation in levelized CO2 capture cost, accounting for 43% of the observed variation across the climate-renewable archetypes considered compared with 16% for climate and 6% for renewable-resource configuration. Model-dependent cost differences exceed 1000 € tCO2-1 at individual locations. Different model representations can also reverse siting preferences, substantially alter cost-optimal system design, and determine whether future CO2 capture-cost targets are achieved. Our results further demonstrate how individual process-level assumptions can propagate through the assessment, resulting in a major source of system-level uncertainty. The harmonized DAC performance data developed here enable systematic comparison of alternative DAC representation in future system assessments.
- Open Access
- 31 October 2026
- Published by Elsevier in Applied Energy
- Vol. 427
Enhancing feasibility of cost-optimal energy systems in surrogate-assisted design optimization
- 31 October 2026
- Published by Elsevier in Applied Energy
- Vol. 427
Open AccessEnhancing feasibility of cost-optimal energy systems in surrogate-assisted design optimization
- Open Access
- 28 October 2026
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 60 (44) , 31502-31516
A Framework for Time-Explicit Life Cycle Optimization
Life cycle optimization (LCO) selects optimal processes and supply chains from a set of alternatives given environmental constraints and objectives, supporting the design of sustainable systems and their transitions. However, current approaches rely on static assumptions, overlooking two interacting temporal dimensions: temporal distribution (flows are spread over time) and temporal evolution (processes and supply chains change over time). Because distribution and evolution jointly dictate the magnitude of a flow at a given time, both must be considered simultaneously to accurately optimize against cumulative environmental impacts and time-specific environmental constraints. We present a framework for time-explicit LCO that captures these interdependencies to determine optimal transition pathways. The framework tracks flow timing relative to process installation and dynamically determines flow magnitudes from time-specific process parameters and background supply chains. A case study on integrated methanol and pig iron production demonstrates how time-explicit LCO enables optimization against time-resolved environmental impacts and constraints, revealing mitigation strategies inaccessible to static approaches: prioritizing early high-efficiency technology installation to idle older processes as operational savings outweigh embodied impacts of stranded assets, and avoiding transient resource bottlenecks through diversification. To facilitate widespread application, we provide the open-source Python package optimex, enabling practitioners to design transition pathways that rigorously respect environmental limits.
- 28 October 2026
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 60 (44) , 31502-31516
Open AccessA Framework for Time-Explicit Life Cycle Optimization
Life cycle optimization (LCO) selects optimal processes and supply chains from a set of alternatives given environmental constraints and objectives, supporting the design of sustainable systems and their transitions. However, current approaches rely on static assumptions, overlooking two interacting temporal dimensions: temporal distribution (flows are spread over time) and temporal evolution (processes and supply chains change over time). Because distribution and evolution jointly dictate the magnitude of a flow at a given time, both must be considered simultaneously to accurately optimize against cumulative environmental impacts and time-specific environmental constraints. We present a framework for time-explicit LCO that captures these interdependencies to determine optimal transition pathways. The framework tracks flow timing relative to process installation and dynamically determines flow magnitudes from time-specific process parameters and background supply chains. A case study on integrated methanol and pig iron production demonstrates how time-explicit LCO enables optimization against time-resolved environmental impacts and constraints, revealing mitigation strategies inaccessible to static approaches: prioritizing early high-efficiency technology installation to idle older processes as operational savings outweigh embodied impacts of stranded assets, and avoiding transient resource bottlenecks through diversification. To facilitate widespread application, we provide the open-source Python package optimex, enabling practitioners to design transition pathways that rigorously respect environmental limits.
- Open Access
- 16 October 2026
- Published by Elsevier in SSRN Electronic Journal
Emerging Environmental Relevance of Electricity Grid Infrastructure
Sustainable energy systems require major electricity grid expansion, yet the environmental impacts of future grid infrastructure are largely overlooked. We assess these impacts by combining a detailed model of Germany’s grid infrastructure with Integrated Assessment Model scenarios reflecting future supply chains. While more renewables help decarbonize grid component production, transmitting and distributing this renewable electricity requires additional grid expansion, raising emissions. We find that grid infrastructure becomes a major contributor to climate impacts of future electricity, with shares rising from 1% in 2023 to up to 21% by 2045. Main drivers of grid-related impacts, even under ambitious decarbonization, remain electricity and heat generation for aluminum production alongside emissions from steelmaking. Moreover, decarbonizing supply chains shift environmental impacts towards land use and mineral depletion. Our findings underscore the growing environmental relevance of grid infrastructure, reveal levers for reducing grid-related impacts, and call for their integration into global policy and energy planning.
- 16 October 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessEmerging Environmental Relevance of Electricity Grid Infrastructure
Sustainable energy systems require major electricity grid expansion, yet the environmental impacts of future grid infrastructure are largely overlooked. We assess these impacts by combining a detailed model of Germany’s grid infrastructure with Integrated Assessment Model scenarios reflecting future supply chains. While more renewables help decarbonize grid component production, transmitting and distributing this renewable electricity requires additional grid expansion, raising emissions. We find that grid infrastructure becomes a major contributor to climate impacts of future electricity, with shares rising from 1% in 2023 to up to 21% by 2045. Main drivers of grid-related impacts, even under ambitious decarbonization, remain electricity and heat generation for aluminum production alongside emissions from steelmaking. Moreover, decarbonizing supply chains shift environmental impacts towards land use and mineral depletion. Our findings underscore the growing environmental relevance of grid infrastructure, reveal levers for reducing grid-related impacts, and call for their integration into global policy and energy planning.
- Open Access
- 5 October 2026
- Published by Springer Nature in Research Square
Enablers and barriers of sector-coupled energy systems within planetary boundaries
Energy systems must transition toward absolute environmental sustainability across all impact categories. However, energy systems are commonly designed focusing solely on the impact category climate change. To address this challenge, we optimize the greenfield design of the German energy system in 2050, encompassing the coupled power, heat, and private passenger mobility sectors, while penalizing the transgression of sustainability thresholds derived from the planetary boundaries. We find that sustainable energy system designs are achievable when sustainability thresholds are determined based on the economic value of the energy system. However, stricter sustainability thresholds, which may result from data uncertainties or the choice of allocation method, are transgressed in the atmospheric aerosol loading and phosphorus cycle categories due to impacts from the private passenger mobility sector and material supply. Sustainable energy systems thus require reductions in private passenger mobility demand and material-related environmental impacts, as well as sufficient carbon dioxide storage, particularly if sustainability thresholds prove to be more stringent.
- 5 October 2026
- Published by Springer Nature in Research Square
Open AccessEnablers and barriers of sector-coupled energy systems within planetary boundaries
Energy systems must transition toward absolute environmental sustainability across all impact categories. However, energy systems are commonly designed focusing solely on the impact category climate change. To address this challenge, we optimize the greenfield design of the German energy system in 2050, encompassing the coupled power, heat, and private passenger mobility sectors, while penalizing the transgression of sustainability thresholds derived from the planetary boundaries. We find that sustainable energy system designs are achievable when sustainability thresholds are determined based on the economic value of the energy system. However, stricter sustainability thresholds, which may result from data uncertainties or the choice of allocation method, are transgressed in the atmospheric aerosol loading and phosphorus cycle categories due to impacts from the private passenger mobility sector and material supply. Sustainable energy systems thus require reductions in private passenger mobility demand and material-related environmental impacts, as well as sufficient carbon dioxide storage, particularly if sustainability thresholds prove to be more stringent.
- Open Access
- 25 August 2026
- Published by Elsevier in SSRN Electronic Journal
Coordinating timescales in the operation of power-to-X energy systems: Integrating seasonal energy storage into real-time optimization
Operational decision-making in renewable energy systems, such as those integrating power-to-X technologies, is challenged by external uncertainties spanning across multiple timescales, including hourly and seasonal variability in renewable electricity generation, day-ahead energy price fluctuations, and real-time imbalances between energy supply and demand. Optimizing the operation of such energy systems requires the simultaneous representation of high-resolution real-time dynamics and long-term seasonal effects, particularly those associated with seasonal energy storage, leading to large-scale optimization problems that are computationally challenging. To this end, we propose a method that integrates seasonal energy storage into real-time optimization (RTO) through a rolling-horizon approach. To balance the computational complexity, a hybrid time-series representation is applied, consisting of a detailed block at the day-ahead timescale and an aggregated block at the seasonal timescale. A superposition-based storage modeling approach is incorporated to enable energy storage at seasonal timescale. The method is applied to optimize the annual operation of a real-world adapted power-to-X energy system with hourly resolution. The method performance is evaluated against three benchmarks: (i) an a posteriori optimization with perfect foresight, (ii) a daily re-optimization, and (iii) a myopic RTO. The results show that the proposed method reduces computing time by over two orders of magnitude relative to the a posteriori approach. Compared to the daily re-optimization and myopic RTO approaches, our method successfully integrates medium- and long-term scheduling into real-time operation, while achieving a modest reduction in operational costs of about 3%.
- 25 August 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessCoordinating timescales in the operation of power-to-X energy systems: Integrating seasonal energy storage into real-time optimization
Operational decision-making in renewable energy systems, such as those integrating power-to-X technologies, is challenged by external uncertainties spanning across multiple timescales, including hourly and seasonal variability in renewable electricity generation, day-ahead energy price fluctuations, and real-time imbalances between energy supply and demand. Optimizing the operation of such energy systems requires the simultaneous representation of high-resolution real-time dynamics and long-term seasonal effects, particularly those associated with seasonal energy storage, leading to large-scale optimization problems that are computationally challenging. To this end, we propose a method that integrates seasonal energy storage into real-time optimization (RTO) through a rolling-horizon approach. To balance the computational complexity, a hybrid time-series representation is applied, consisting of a detailed block at the day-ahead timescale and an aggregated block at the seasonal timescale. A superposition-based storage modeling approach is incorporated to enable energy storage at seasonal timescale. The method is applied to optimize the annual operation of a real-world adapted power-to-X energy system with hourly resolution. The method performance is evaluated against three benchmarks: (i) an a posteriori optimization with perfect foresight, (ii) a daily re-optimization, and (iii) a myopic RTO. The results show that the proposed method reduces computing time by over two orders of magnitude relative to the a posteriori approach. Compared to the daily re-optimization and myopic RTO approaches, our method successfully integrates medium- and long-term scheduling into real-time operation, while achieving a modest reduction in operational costs of about 3%.
- Open Access
- 17 August 2026
- Published by Elsevier in International Journal of Greenhouse Gas Control
- Vol. 155
Gradient-based nonlinear model predictive control enabling demand-side management for adsorption-based direct air carbon capture
- 17 August 2026
- Published by Elsevier in International Journal of Greenhouse Gas Control
- Vol. 155
Open AccessGradient-based nonlinear model predictive control enabling demand-side management for adsorption-based direct air carbon capture
- Open Access
- 25 July 2026
- Published by Elsevier in Computers & Chemical Engineering
- Vol. 214
HENSling: Simultaneous heat exchanger network synthesis and scheduling for batch processes using a decomposition approach
- 25 July 2026
- Published by Elsevier in Computers & Chemical Engineering
- Vol. 214
Open AccessHENSling: Simultaneous heat exchanger network synthesis and scheduling for batch processes using a decomposition approach
- Open Access
- 21 July 2026
- Published by Elsevier in Applied Energy
- Vol. 424
A decomposition method for optimizing the operation of power-to-X energy systems with detailed process models
- 21 July 2026
- Published by Elsevier in Applied Energy
- Vol. 424
Open AccessA decomposition method for optimizing the operation of power-to-X energy systems with detailed process models
- Open Access
- 16 July 2026
- Published by Elsevier in Energy Conversion and Management: X
- Vol. 31
Mitigating the end-of-horizon effect in seasonal storage operation with forecast-updated cost-to-go functions
- 16 July 2026
- Published by Elsevier in Energy Conversion and Management: X
- Vol. 31
Open AccessMitigating the end-of-horizon effect in seasonal storage operation with forecast-updated cost-to-go functions