TKTaehee Kim

Taehee Kim

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Taehee Kim has a total of 113 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Ligand-Engineered Methylammonium Lead Bromide Nanoplatelets: Single-Photon Emission and Strong Light-Matter Coupling

    by Taras V. Sekh, Taehee Kim, Sebastian Sabisch, Federica Bertolotti, Laura Caliò, Juan F. Galisteo-López, Francisco J. Coto-Ruiz, Lucía Santiago-Andrades, Antonietta Guagliardi, Norberto Masciocchi, et al.

    Lead halide perovskite nanoplatelets (LHP NPLs) are of immense interest in the materials science and optoelectronics communities owing to their strong quantum confinement leading to narrow emission peaks, thickness-dependent tunable photoluminescence, and large exciton binding energies. Thus far, their further development and photophysical investigations at ensemble and single-particle levels have been impeded by suboptimal ligand passivation, inferior environmental and colloidal stability compared to their 3D nanocrystal counterparts, and limited compositional diversity. Here, we report highly monodisperse methylammonium lead bromide (MAPbBr3) NPLs (11.3 ± 2.3 × 1.7 ± 0.5 nm) with tunable ligand chemistry and enhanced photoluminescence quantum yields of up to 80%. NPLs capped with zwitterionic ligands exhibit improved stability upon air exposure and sequential purification. Nuclear magnetic resonance spectroscopy on ligand-exchanged NPLs, capped with either phosphocholine- or phosphoethanolamine-type ligands, confirms the partial replacement of the pristine ligands. Owing to the size and shape uniformity of synthesized MAPbBr3 NPLs, they readily form assemblies of stacked face-to-face NPLs, as observed in both colloidal dispersions and films, giving rise to concentration-dependent multicolor emission. The temperature dependence of the NPL emission exhibits a nonmonotonous trend, attributed to the highly anisotropic confinement and the consequent exciton–phonon coupling. We also observed photoluminescence from single MAPbBr3 NPLs at both room and cryogenic temperatures, revealing highly polarized fine-structure emission lines with single-photon purity exceeding 80%. The high uniformity and optical transparency of MAPbBr3 NPL films enabled their integration into optical cavities, where they exhibited strong light-matter coupling with a substantial Rabi splitting of 200 meV.


  • Open Access

    Phonon-driven wavefunction localization enhances room-temperature single-photon purity in large hybrid lead halide perovskite quantum dots

    by Leon G. Feld, Simon C. Boehme, Sebastian Sabisch, Nadav Frenkel, Nuri Yazdani, Viktoriia Morad, Chenglian Zhu, Taehee Kim, Stefano Canossa, Mariia Svyrydenko, et al.

    In lead halide perovskites (APbX 3 ), the effect of the A-site cation on optical and electronic properties has initially been thought to be marginal. Yet, evidence of beneficial effects on solar-cell performance and light emission is accumulating. Here, we report that the A-site cation in soft APbBr 3 colloidal quantum dots (QDs) controls the phonon-induced localization of the exciton wavefunction. Insights from ab-initio molecular-dynamics simulations and single-particle fluorescence spectroscopy demonstrate that anharmonic crystal vibrations and the resulting disorder act as an additional confinement potential. Avoiding the trade-off between single-photon purity and optical stability faced by downsizing conventional QDs into the strong confinement regime, dynamical phonon-induced confinement in large organic-inorganic perovskite QDs enables bright (10 6 photons/s), stable ( > 1 h), and pure (> 95%) single-photon emission tunable across a wide spectral range (495-745 nm). Strong electron-phonon interaction in soft perovskite QDs provides an unconventional route toward developing scalable room-temperature quantum-light sources.


  • Open Access

    Kinetically-controlled intermediate-direct-pinning for homogeneous energy landscapes in quasi-two-dimensional perovskites for efficient and narrow blue emission

    by Joo Sung Kim, Hyeon-Dong Lee, Jeong Hyun Jung, Taehee Kim, Seung-Je Woo, Hyung Joong Yoon, Jaehyun Moon, Chan-Mo Kang, Seung-Eui Chang, Dong-Hyeok Kim, et al.

    Quasi-two-dimensional perovskite structures hold great potential as active layers in blue perovskite light-emitting diodes. However, they face challenges of limited emission efficiency and broadened spectra due to phase inhomogeneity. Here, we report an intermediate-direct-pinning method to develop a uniform-phase quasi-two-dimensional structure with a homogeneous energy landscape. By forming a strong cation-π interaction complex, we stabilize a metastable intermediate phase with retarded crystallization toward low- n phases ( n ≤ 3), followed by a direct pinning process favouring crystallization of medium- n phases ( n = 4 and 5) without further broadening. Additionally, introducing a surface-anchoring ligand during the pinning process effectively suppresses non-radiative recombination. The resultant structure shows efficient sky-blue emission and narrow linewidth (108 meV). Devices fabricated with this structure reach a maximum external quantum efficiency of 22.5% at 489 nm, which is scalable to large-area (pixel size: 900 mm 2 ) and passive matrix devices (30 × 10 arrays, active area = 200 μm × 600 μm). These findings highlight the potential of perovskite light-emitting diodes for full-colour displays.


  • Open Access

    Highly Emissive Colloidal Nanocrystals of a “2.5-Dimensional” Monomethylhydrazinium Lead Bromide

    by Viktoriia Morad, Taehee Kim, Sebastian Sabisch, Simon C. Boehme, Simone Delessert, Nadine J. Schrenker, Sara Bals, Gabriele Rainò, Maksym V. Kovalenko

    The ability to control materials at the nanoscale has advanced optoelectronic devices, such as LEDs, displays, and quantum light sources. A new frontier is controlling exciton properties beyond quantum size confinement, achieved through single monolayer heterostructures. In the prototypical example of transition metal dichalcogenide heterostructures and moiré superlattices, excitons with long lifetimes, strong binding energies, and tunable dipole moments have been demonstrated and are ideal for optoelectronics and quantum applications. Expanding this material platform is crucial for further progress. This study introduces colloidal nanocrystals (NCs) of monomethylhydrazinium lead bromide (MMHPbBr3), a novel lead halide perovskite (LHP) with a unique "2.5-dimensional" electronic structure. While the spatial dimensionality of the NC extends in all three dimensions, these NCs exhibit excitonic properties intermediate between 2D and 3D LHPs. Density functional theory (DFT) calculations show that MMHPbBr3 features spatially separated electron and hole wave functions, with electrons delocalized in 3D and holes confined in 2D monolayers. Synthesized via a rapid colloidal method, these NCs were characterized by using techniques such as 4D-STEM and nuclear magnetic resonance, confirming their monoclinic structure. Optical analysis revealed size-dependent properties and 3D quantum confinement effects, with three distinct photoluminescence (PL) bands at cryogenic temperatures corresponding to excitons with varying interlayer coupling. PL spectroscopy of single MMHPbBr3 NCs reveals their photon emission statistics, expanding their potential for unconventional quantum material designs.


  • Sculpting the Electronic Nano-Terrain on a Perovskite Film for Efficient Charge Transport

    by Taehee Kim, Do Hyung Chun, Dong Gue Roe, Wook Kim, Jiyeon Lee, Jiwon Kim, Dukhyun Choi, Dae-Geun Choi, Jeong Ho Cho, Jong Hyeok Park, et al.

    Nanopatterned halide perovskites have emerged to improve the performance of optoelectronic devices by controlling the crystallographic and optical properties via morphological modification. However, the correlation between the photophysical property and morphology transformation in nanopatterned perovskite films remains elusive, which hinders the rational design of nanopatterned halide perovskites for optoelectronic devices. In this study, we employed nanoimprinting lithography on a perovskite film to exert a precise control over grain growth and manipulate electronic structures at the level of individual grains. Surface-selective fluorescence lifetime imaging microscopy (FLIM) analyzes the spatiotemporally disentangled geometrical variations in carrier recombination rate and band structure modulation according to different pattern morphologies. Consequently, the stereoscopic mechanism of confined grain growth was unveiled, highlighting the quantitative grain size-based parameters that are crucial for nanoscale material engineering. Notably, the pattern-induced reduction of effective charge mass enabled exclusive control over the subdiffusive carrier transport dynamics on perovskite surfaces, ultimately realizing the surface-selective perovskite photodetectors. The implications of this study are expected to provide valuable guidelines, inspiring innovative design protocols for advancing the next-generation optoelectronic technologies.


  • Retention of Intrinsic Photophysical Properties of Porphyrin Building Blocks in 3D Organic Frameworks through Magic Angle Alignment

    by Jeong Heon Lee, Hyunjun Park, Younghun Kim, Dajeong Yim, Taehee Kim, Jinhyuk Choi, Yongjae Lee, Woo-Dong Jang

    Construction of three-dimensional (3D) frameworks maintaining intrinsic photophysical properties of monomeric building blocks is difficult and challenging due to the existence of various molecular interactions, such as metal-organic and π-π interactions. A 3D hydrogen-bonded organic framework (YSH-1Zn) with permanent porosity was constructed using a porphyrin having six carboxylic acid groups (1Zn). Brunauer-Emmett-Teller surface area measurement indicated that YSH-1Zn has a porous structure with a surface area of 392 m2/g. Single-crystal X-ray diffraction analysis revealed that 1Zn creates a 5-fold interwoven 3D network structure adopting a monoclinic system with a space group of P21/c. Each 1Zn within a single crystal exhibits parallel alignment with a slip-stack angle of 54.6°, in good agreement with the magic angle. Although the center-to-center distance of the nearest zinc atoms in YSH-1Zn is only 5.181 Å, the UV/vis absorption and fluorescence emission of YSH-1Zn are not different from those of 1Zn, indicating the absence of an interaction between excitons. Due to the magic angle alignment of 1Zn, the fluorescence lifetime, decay profiles, and quantum yield remained uniform even in the solid state.

  • Spatiotemporally Controllable Electrical Stimulator via Independent Photobending and Upconversion Photoluminescence Using Two Different Wavelengths of Near-Infrared/Visible Light as Dual Stimuli

    by Jiyeon Lee, Dongjun Kim, Minsuk Park, Jaehyeok Ryu, Hyunbin Park, Taehee Kim, Dongho Kim, Sang-Yong Ju, Jiwon Kim

    Multistimuli responsive materials are advantageous in that they can enhance the desired response or bypass unwanted reactions. Light is one of the most attractive stimuli since it allows remote spatiotemporal control and multiplexing of properties (e.g., wavelength, intensity, irradiation time, pulsed/continuous wave) for application on multiphotoresponsive materials. However, the operating wavelength for such photoresponsive systems often includes an ultraviolet (UV) range that limits its use in the biomedical field. Herein, we investigate near-infrared (NIR)/visible (Vis) light-responsive nanocomposite films composed of rare earth element (i.e., Yb, Er)-doped NaYF4 nanoparticles (NPs) embedded in azobenzene-incorporated poly(dimethylsiloxane) (AzoPDMS), silk fibroin, and silver nanowire (AgNW) layers. Photobending (PB) of the nanocomposite film is induced by a Vis light of 400-700 nm, while upconversion photoluminescence (UCPL) of embedded NPs is activated by an NIR light of 980 nm. The excitation wavelength of photoluminescence (PL) is shifted to the NIR (λ = 980 nm) range via photon upconversion in rare earth element-doped NPs. Independent operation of PB and UCPL enables both on-demand electrical switching and real-time location monitoring for spatiotemporally controlled electrical pulse stimulation. As a result, the dual-photoresponsive nanocomposite film can be utilized as a remotely controllable electrical stimulator and location indicator via different wavelengths of light.


  • Engineered Surface Halide Defects by Two-Dimensional Perovskite Passivation for Deformable Intelligent Photodetectors

    by Taehee Kim, Seongsik Jeong, Kyeong-Hwan Kim, Hyunseok Shim, Dongho Kim, Hae-Jin Kim

    As attractive photoactive materials, metal halide perovskites demonstrate outstanding performance in a wide range of optoelectronic applications. Among the various compositions studied, mixed-halide perovskites have a finely tunable band gap that renders them desirable for targeted applications. Despite their advantages, photoinduced halide segregation often deters the photoelectric stability of the materials. Herein, we adopt a strategy of post-treating the perovskite surface with an organic spacer to generate a two-dimensional (2D) perovskite passivating layer. Trap-assisted recombination pathways can be selectively modulated by passivating the surface halide defects that cause photoinduced halide segregation. Fluorescence lifetime imaging of flat and bent surfaces of perovskites reveals that the perovskite lattice tolerates mechanical strain via the neutralizing passivation of ionic halide defects. Upon bending, the photocurrent response of the flexible photodetector is maintained over 83% for 2D passivated perovskite and drops to 23% for pristine perovskite. A flexible photodetector array built with 2D passivated perovskite, in combination with a deep learning algorithm, demonstrates excellent accuracy in determining letters of the alphabet for both flat (>96%) and bent (>93%) states. The connection of chemically modified charge carrier dynamics and mechanical properties revealed in this study offers valuable guidance for developing next-generation optoelectronic applications.


  • Shape‐Tuned Multiphoton‐Emitting InP Nanotetrapods

    by Taehee Kim, Youngsik Kim, Seongmin Park, Kyoungwon Park, Zhen Wang, Sang Ho Oh, Sohee Jeong, Dongho Kim

    As the properties of a semiconductor material depend on the fate of the excitons, manipulating exciton behavior is the primary objective of nanomaterials. Although nanocrystals exhibit unusual excitonic characteristics owing to strong spatial confinement, studying the interactions between excitons in a single nanoparticle remains challenging due to the rapidly vanishing multiexciton species. Here, a platform for exciton tailoring using a straightforward strategy of shape‐tuning of single‐crystalline nanocrystals is presented. Spectroscopic and theoretical studies reveal a systematic transition of exciton confinement orientation from 3D to 2D, which is solely tuned by the geometric shape of material. Such a precise shape‐effect triggers a multiphoton emission in single nanotetrapods with arms longer than the exciton Bohr radius of material. In consequence, the unique interplay between the multiple quantum states allows a geometric modulation of the quantum‐confined Stark effect and nanocrystal memory effect in single nanotetrapods. These results provide a useful metric in designing nanomaterials for future photonic applications.


  • Open Access

    Enhanced band-filling effect in halide perovskites via hydrophobic conductive linkers

    by Jung Hwan Lee, Taehee Kim, Seulki Song, Yongchul Kim, Sooeun Shin, SunJe Lee, Younghoon Kim, Young Jin Choi, Sungsoon Kim, Kan Zhang, et al.