Paola Calicchia
Research Subjects
Paola Calicchia has a total of 52 co-authors. Here are the top co-authors by number of shared publications:
- Angelo Tatì
Department of Sustainability, ENEA, 00123 Rome, Italy
3 shared publications S. Lagomarsino
Istituto di Elettronica dello Stato Solido, C.N.R., 00156 Rome, Italy
3 shared publications- Sara De Simone
Institute for Microelectronics and Microsystems (IMM), Consiglio Nazionale delle Ricerche (CNR), Via del Fosso del Cavaliere 100, 00133 Rome, Italy
3 shared publications - Silvano Buogo
CNR-Istituto di Acustica 'O,M.Corbino', Via del Fosso del Cavaliere, 100, 00133 Rome, Italy
3 shared publications - Alessia Cedola
Institute of Nanotechnology - CNR, Piazzale Aldo Moro 5, Rome, Italy
2 shared publications - Antonio Camassa
Institute of Marine Engineering (INM), National Research Council, 00133 Rome, Italy
2 shared publications
Latest Publications
- Open Access
- 24 September 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (19) , 8284
Multi-Technique Approach for the Sustainable Characterisation and the Digital Documentation of Painted Surfaces in the Hypogeum Environment of the Priscilla Catacombs in Rome
The purpose of this paper is to identify an efficient, sustainable, and “green” approach to address the challenges of the preservation of hypogeum heritage, focusing on the problem of moisture, a recurring cause of degradation in porous materials, especially in catacombs. Conventional and novel technologies have been used to address this issue with a completely non-destructive approach. The article provides a multidisciplinary investigation making use of advanced technologies and analysis to quantify the extent and distribution of water infiltration in masonry before damage starts to be visible or irreversibly causes damage. Four different technologies, namely Portable Nuclear Magnetic Resonance (NMR), Audio Frequency–Acoustic Imaging (AF–AI), Laser-Induced Fluorescence (LIF), Infrared Thermography (IRT), and 3D Laser Scanning (RGB-ITR), were applied in the Priscilla catacombs in Rome (Italy). These imaging techniques allow the characterisation of the deterioration of painted surfaces within the delicate environment of the Greek chapel in the Priscilla catacombs. The resulting high-detailed 3D coloured model allowed for easily referencing the data collected by the other techniques aimed also at the study of the potential presence of salt efflorescence and/or microorganisms. The results supply an efficient and sustainable tool aimed at cultural heritage conservation but also at the creation of digital documentation obtained with green methodologies for a wider sharing, ensuring its preservation for future generations.
- 24 September 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (19) , 8284
Open AccessMulti-Technique Approach for the Sustainable Characterisation and the Digital Documentation of Painted Surfaces in the Hypogeum Environment of the Priscilla Catacombs in Rome
The purpose of this paper is to identify an efficient, sustainable, and “green” approach to address the challenges of the preservation of hypogeum heritage, focusing on the problem of moisture, a recurring cause of degradation in porous materials, especially in catacombs. Conventional and novel technologies have been used to address this issue with a completely non-destructive approach. The article provides a multidisciplinary investigation making use of advanced technologies and analysis to quantify the extent and distribution of water infiltration in masonry before damage starts to be visible or irreversibly causes damage. Four different technologies, namely Portable Nuclear Magnetic Resonance (NMR), Audio Frequency–Acoustic Imaging (AF–AI), Laser-Induced Fluorescence (LIF), Infrared Thermography (IRT), and 3D Laser Scanning (RGB-ITR), were applied in the Priscilla catacombs in Rome (Italy). These imaging techniques allow the characterisation of the deterioration of painted surfaces within the delicate environment of the Greek chapel in the Priscilla catacombs. The resulting high-detailed 3D coloured model allowed for easily referencing the data collected by the other techniques aimed also at the study of the potential presence of salt efflorescence and/or microorganisms. The results supply an efficient and sustainable tool aimed at cultural heritage conservation but also at the creation of digital documentation obtained with green methodologies for a wider sharing, ensuring its preservation for future generations.
- 6 March 2024
- Published by Springer Nature
- p. 53-63
Integrating Diagnostic Tools in the Ariosto Room
- Open Access
Integration of Non-Destructive Acoustic Imaging Investigation with Photogrammetric and Morphological Analysis to Study the “Graecia Vetus” in the Chigi Palace of Ariccia
Integrating complementary information from many available technologies is a question of growing interest among the Cultural Heritage community, due to the complexity of the cultural assets under study and of their contexts. Recently, this need has pushed the development of appropriate data fusion procedures for this sector, among which the authors wish to propose their approach for treating multi-source data from image-based methodologies, experimented with in a representative case study. The Chigi Palace of Ariccia hosted our investigation campaign on a precious monochrome painting by Giuseppe Cades (1788), the Graecia Vetus. The study encompasses a photogrammetric survey and two acoustic diagnostic methods, the innovative Frequency Resolved Acoustic Imaging technique and the more traditional Acoustic Tomography. The photogrammetric survey allows reconstruction of the surface morphology of the painting, generating a 3D Digital Elevation Model, while the acoustic methods detect the structural damage beneath the surface due to detachments and flaws, generating 2D images. The output of this heterogeneous datasets fusion is a multi-layer map, each layer representing a type of dataset that clearly shows how some deformations of the surface morphology appear correlated with the presence of sub-surface anomalies, wide air cavities and more superficial detachments revealed by the acoustic diagnostic methods. Beside the exam of the conservation state of the Graecia Vetus, the proposed procedure effectively guarantees access to the integrated information, offering the possibility to understand the correlation between the causes and the effects of the decay process, as well as the retrieval of the single analysis in order to deepen one specific aspect.
Open AccessIntegration of Non-Destructive Acoustic Imaging Investigation with Photogrammetric and Morphological Analysis to Study the “Graecia Vetus” in the Chigi Palace of Ariccia
Integrating complementary information from many available technologies is a question of growing interest among the Cultural Heritage community, due to the complexity of the cultural assets under study and of their contexts. Recently, this need has pushed the development of appropriate data fusion procedures for this sector, among which the authors wish to propose their approach for treating multi-source data from image-based methodologies, experimented with in a representative case study. The Chigi Palace of Ariccia hosted our investigation campaign on a precious monochrome painting by Giuseppe Cades (1788), the Graecia Vetus. The study encompasses a photogrammetric survey and two acoustic diagnostic methods, the innovative Frequency Resolved Acoustic Imaging technique and the more traditional Acoustic Tomography. The photogrammetric survey allows reconstruction of the surface morphology of the painting, generating a 3D Digital Elevation Model, while the acoustic methods detect the structural damage beneath the surface due to detachments and flaws, generating 2D images. The output of this heterogeneous datasets fusion is a multi-layer map, each layer representing a type of dataset that clearly shows how some deformations of the surface morphology appear correlated with the presence of sub-surface anomalies, wide air cavities and more superficial detachments revealed by the acoustic diagnostic methods. Beside the exam of the conservation state of the Graecia Vetus, the proposed procedure effectively guarantees access to the integrated information, offering the possibility to understand the correlation between the causes and the effects of the decay process, as well as the retrieval of the single analysis in order to deepen one specific aspect.
- Open Access
Moisture Damage in Ancient Masonry: A Multidisciplinary Approach for In Situ Diagnostics
San Nicola in Carcere, one of the minor basilicas in the historical center of Rome, was the location of a wide investigation campaign of the water-related deterioration causes, present in the lower sector of the apse and adjacent pillars, affected by water infiltrations, mould and salt efflorescence. The results obtained identify the presence of water content and related effects mainly on the sides of the apsidal wall. This work focuses on the use of five Non-Destructive Techniques (NDT) and intends to show the gains obtained by integrating widely interdisciplinary methods, namely the Infrared Thermography (IRT), the Unilateral Nuclear Magnetic Resonance (Unilateral NMR), the Acoustic Tomography (AT), the Acoustic Imaging (AI) and the Laser-Induced Fluorescence (LIF). All the techniques contribute to the rapid, non-invasive and early identification of the moisture distribution, while some of them (LIF and AI) also address the determination of some moisture effects. The integrated use of different techniques helps to take the multidisciplinary point of view necessary to formulate an effective restoration intervention based on a sound scientific rationale; nonetheless, it allows to experiment a holistic approach, verifying the potential of a wide range of NDTs available within the context of a restoration yard.
Open AccessMoisture Damage in Ancient Masonry: A Multidisciplinary Approach for In Situ Diagnostics
San Nicola in Carcere, one of the minor basilicas in the historical center of Rome, was the location of a wide investigation campaign of the water-related deterioration causes, present in the lower sector of the apse and adjacent pillars, affected by water infiltrations, mould and salt efflorescence. The results obtained identify the presence of water content and related effects mainly on the sides of the apsidal wall. This work focuses on the use of five Non-Destructive Techniques (NDT) and intends to show the gains obtained by integrating widely interdisciplinary methods, namely the Infrared Thermography (IRT), the Unilateral Nuclear Magnetic Resonance (Unilateral NMR), the Acoustic Tomography (AT), the Acoustic Imaging (AI) and the Laser-Induced Fluorescence (LIF). All the techniques contribute to the rapid, non-invasive and early identification of the moisture distribution, while some of them (LIF and AI) also address the determination of some moisture effects. The integrated use of different techniques helps to take the multidisciplinary point of view necessary to formulate an effective restoration intervention based on a sound scientific rationale; nonetheless, it allows to experiment a holistic approach, verifying the potential of a wide range of NDTs available within the context of a restoration yard.
- Open Access
- 9 April 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (8) , 3382
PICUS: A Pocket-Sized System for Simple and Fast Non-Destructive Evaluation of the Detachments in Ancient Artifacts
An innovative, robust method has been developed, based on the use of a simple, compact, expressly designed device, named PICUS (the ‘woodpecker’ in ancient Latin), and inspired by the auscultation method carried out by the experts in the field of conservation of cultural heritage. This method entails gently knocking the surface, controlling and measuring the impact time of the stroke’s force, recording the generated sound, comparing the acquired sound with a reference sound by calculating the cross-correlation function, and its maximum, as a measure of the detachment. In a nutshell, it performs an analysis similar to that carried out by a professional who performs a routine examination on the detachments by hand. The experimental apparatus consists of a probe made of an electromechanical percussion element that gently taps the surface producing a sound, a force sensor purposely developed to measure the impact force, and a microphone, all connected with an Arduino-like low cost board, to record and elaborate the sounds and the force sensor signal. The probe XY position on the scene is recognized using an infra-red (IR) system with a low-cost IR camera and an IR light-emitting diode (IR-LED) positioned on the probe. The “tapper” and the microphone replace the hand and the ear of a conservator carrying out a detachment investigation, while the comparison with a reference is the typical mind process of a professional restorer. The result is the fusion of the microphone data and the force sensor data.
- 9 April 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (8) , 3382
Open AccessPICUS: A Pocket-Sized System for Simple and Fast Non-Destructive Evaluation of the Detachments in Ancient Artifacts
An innovative, robust method has been developed, based on the use of a simple, compact, expressly designed device, named PICUS (the ‘woodpecker’ in ancient Latin), and inspired by the auscultation method carried out by the experts in the field of conservation of cultural heritage. This method entails gently knocking the surface, controlling and measuring the impact time of the stroke’s force, recording the generated sound, comparing the acquired sound with a reference sound by calculating the cross-correlation function, and its maximum, as a measure of the detachment. In a nutshell, it performs an analysis similar to that carried out by a professional who performs a routine examination on the detachments by hand. The experimental apparatus consists of a probe made of an electromechanical percussion element that gently taps the surface producing a sound, a force sensor purposely developed to measure the impact force, and a microphone, all connected with an Arduino-like low cost board, to record and elaborate the sounds and the force sensor signal. The probe XY position on the scene is recognized using an infra-red (IR) system with a low-cost IR camera and an IR light-emitting diode (IR-LED) positioned on the probe. The “tapper” and the microphone replace the hand and the ear of a conservator carrying out a detachment investigation, while the comparison with a reference is the typical mind process of a professional restorer. The result is the fusion of the microphone data and the force sensor data.
- 1 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 313-318
Photogrammetric survey to support Non Destructive Tests at St. Alexander Catacombs in Rome
The paper presents an overview of diagnostic campaigns carried out to assess the state of conservation of two Frescos named “Agaso’s Fresco” (case study A) and “The flower garden Fresco dedicated to the deceased Savinianus“ (case study B) at the St. Alexander Catacombs in Rome’s.The activity was developed within the COBRA project, which focuses on disseminating and transferring ENEA advanced instruments, IT services, innovative technologies to SMEs working in the field of cultural heritage protection and conservation.Due to narrow space of access to the case study A, situated in a critical area of the Catacombs, the photogrammetric survey was the only technique capable to perform a complete rendering of the entire element after its restoration. However, three different technologies were applied on the case study B: photogrammetric 3D reconstruction, acoustic imaging test and the thermographic survey.The results of the above-mentioned technologies on case study B have been aligned, compared and fully integrated in order to detect critical areas of the fresco in terms of detachments, cracks and structural weakness. In particular, photogrammetric reconstruction allowed overlying the experimental results obtained by acoustic imaging measurements and thermographic survey to fix their exact position with a great accuracy. The comparison and the integration between these technologies is a useful way for monitoring the state of preservation of archaeological finds, in order to integrate experimental data coming from different diagnostic instruments.
- 1 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 313-318
Photogrammetric survey to support Non Destructive Tests at St. Alexander Catacombs in Rome
The paper presents an overview of diagnostic campaigns carried out to assess the state of conservation of two Frescos named “Agaso’s Fresco” (case study A) and “The flower garden Fresco dedicated to the deceased Savinianus“ (case study B) at the St. Alexander Catacombs in Rome’s.The activity was developed within the COBRA project, which focuses on disseminating and transferring ENEA advanced instruments, IT services, innovative technologies to SMEs working in the field of cultural heritage protection and conservation.Due to narrow space of access to the case study A, situated in a critical area of the Catacombs, the photogrammetric survey was the only technique capable to perform a complete rendering of the entire element after its restoration. However, three different technologies were applied on the case study B: photogrammetric 3D reconstruction, acoustic imaging test and the thermographic survey.The results of the above-mentioned technologies on case study B have been aligned, compared and fully integrated in order to detect critical areas of the fresco in terms of detachments, cracks and structural weakness. In particular, photogrammetric reconstruction allowed overlying the experimental results obtained by acoustic imaging measurements and thermographic survey to fix their exact position with a great accuracy. The comparison and the integration between these technologies is a useful way for monitoring the state of preservation of archaeological finds, in order to integrate experimental data coming from different diagnostic instruments.
- 1 March 2018
- Published by Elsevier in Measurement
- Vol. 118, 320-329
Exploring the potential of a frequency resolved acoustic imaging technique in panel painting diagnostics
- 1 March 2018
- Published by Elsevier in Measurement
- Vol. 118, 320-329
Exploring the potential of a frequency resolved acoustic imaging technique in panel painting diagnostics
- 27 September 2017
- Published by IMEKO International Measurement Confederation in ACTA IMEKO
- Vol. 6 (3)
The Cultural Heritage Open Laboratory System (CHeLabS). Unfolding a cultural heritage-driven development in science and technology.
A territory, with its distinctive cultural heritage ecosystem effectively linked to the technological capabilities, represents a co-evolved system that contributes to the socio-economic growth and to a knowledge-based society.This work illustrates a new model of territorial system recently launched, the Cultural Heritage Open Laboratory System (CHeLabS), that aims at the construction of a favourable context addressing the challenge of a CH-driven development in science and technology. The concept, the inspiring principles, the vision, the activities and the implementation steps of this system are discussed, in addition to few key factors that trigger innovation and sustain knowledge building dynamics useful for shaping the future CHeLabS environment.The cultural asset is at the centre of this system, where a number of representative heritage sites and monuments are the nodes of a scalable and distributed laboratory, based on the Open Access and Sharing culture.The current and bottom-up phase of implementation of the system is described: on a web-based platform, the heritage science community is invited to participate to an interactive survey. The expected results will highlight the problems, perceived by the experts community, demanding for new knowledge and also the technological trends that could unfold effective innovation dynamics.
- 27 September 2017
- Published by IMEKO International Measurement Confederation in ACTA IMEKO
- Vol. 6 (3)
The Cultural Heritage Open Laboratory System (CHeLabS). Unfolding a cultural heritage-driven development in science and technology.
A territory, with its distinctive cultural heritage ecosystem effectively linked to the technological capabilities, represents a co-evolved system that contributes to the socio-economic growth and to a knowledge-based society.This work illustrates a new model of territorial system recently launched, the Cultural Heritage Open Laboratory System (CHeLabS), that aims at the construction of a favourable context addressing the challenge of a CH-driven development in science and technology. The concept, the inspiring principles, the vision, the activities and the implementation steps of this system are discussed, in addition to few key factors that trigger innovation and sustain knowledge building dynamics useful for shaping the future CHeLabS environment.The cultural asset is at the centre of this system, where a number of representative heritage sites and monuments are the nodes of a scalable and distributed laboratory, based on the Open Access and Sharing culture.The current and bottom-up phase of implementation of the system is described: on a web-based platform, the heritage science community is invited to participate to an interactive survey. The expected results will highlight the problems, perceived by the experts community, demanding for new knowledge and also the technological trends that could unfold effective innovation dynamics.
- 15 September 2015
- Vol. 37 (2) , 101-6
[Health issues and regulatory aspects of the use of ultrasound in physiotherapy].
The use of ultrasounds in medicine requires, like all physical agents potentially harmful to human health, an accurate assessment of the risks to the health of patients. The nature and extent of these risks depend on exposure levels which in turn are differentiated according to the specific diagnostic or therapeutic applications. Intermediate exposure levels are associated to physiotherapic applications. To analyze specific issues relating to the effectiveness and safety of physiotherapic treatments, a review of the scientific literature and technical standards was carried out. At present, the actual effectiveness of ultrasound physiotherapy is still far from being clearly assessed: further clinical and experimental studies are needed in order to optimize therapies, determining the benefits and risks of treatments and deepening the understanding of the action mechanisms of the physical agent, even on the basis of a better characterization of those physical quantities mostly significant for biological effects. The examination of technical standards defining the security requirements of the equipment allowed the identification of some critical issues; on these bases some proposals are suggested for the improvement of quality and safety of treatments.
- 15 September 2015
- Vol. 37 (2) , 101-6
[Health issues and regulatory aspects of the use of ultrasound in physiotherapy].
The use of ultrasounds in medicine requires, like all physical agents potentially harmful to human health, an accurate assessment of the risks to the health of patients. The nature and extent of these risks depend on exposure levels which in turn are differentiated according to the specific diagnostic or therapeutic applications. Intermediate exposure levels are associated to physiotherapic applications. To analyze specific issues relating to the effectiveness and safety of physiotherapic treatments, a review of the scientific literature and technical standards was carried out. At present, the actual effectiveness of ultrasound physiotherapy is still far from being clearly assessed: further clinical and experimental studies are needed in order to optimize therapies, determining the benefits and risks of treatments and deepening the understanding of the action mechanisms of the physical agent, even on the basis of a better characterization of those physical quantities mostly significant for biological effects. The examination of technical standards defining the security requirements of the equipment allowed the identification of some critical issues; on these bases some proposals are suggested for the improvement of quality and safety of treatments.
- 6 July 2012
- Published by Elsevier in Applied Acoustics
- Vol. 73 (12) , 1296-1302
Near- to far-field characterization of a parametric loudspeaker and its application in non-destructive detection of detachments in panel paintings
- 6 July 2012
- Published by Elsevier in Applied Acoustics
- Vol. 73 (12) , 1296-1302
Near- to far-field characterization of a parametric loudspeaker and its application in non-destructive detection of detachments in panel paintings