Esra Yılmaz Mertsoy
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Esra Yılmaz Mertsoy has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
Emine Sert
Department of Chemical Engineering, Ege University, Izmir, Turkey
5 shared publicationsFerhan Sami Atalay
5 shared publications- Sezgin Yaşa
Cankiri Karatekin Universitesi
3 shared publications - Burcu Palas
Chemical Engineering Department, Faculty of Engineering, Ege University, Bornova, Izmir, Turkey
2 shared publications - Di Wu
Alexandra Navrotsky Institute for Experimental Thermodynamics, Washington State University, Pullman, Washington 99164, United States
2 shared publications - Emine Sert
Department of Chemical Engineering 35100, Ege University, İzmir, Turkey
2 shared publications
Latest Publications
- 1 May 2026
- Published by Springer Nature
- p. 221-229
Transition Metal Chalcogenides as Promising Electrode Materials for High-Performance Supercapacitors
- 1 May 2026
- Published by Springer Nature
- p. 221-229
Transition Metal Chalcogenides as Promising Electrode Materials for High-Performance Supercapacitors
- Open Access
- 30 April 2026
- Published by Cankiri Karatekin Universitesi in Alfa Mühendislik ve Uygulamalı Bilimler Dergisi
- Vol. 4 (1) , 10-22
Üç Metalli CuFeV-LDH Yapısı Sentezi, Karakterizasyonu ve Metilen Mavisi Giderimi Üzerine Etkisi
LDH yapıları, esnek ve uyarlanabilir özelliklere sahip olması sayesinde belirli bir uygulama için modifiye edilebilmektedir. Bu çalışmada, CuFeV-LDH yapısı sentezlenmiş ve XRD, FTIR, FE-SEM ve BET gibi analiz yöntemleri ile karakterize edilerek yapısı ortaya koyulmuştur. XRD sonucu malzemenin yüksek kristal yapıya sahip olduğunu göstermiştir. FE-SEM sonucuna göre yapının nano boyutlu küresel taneciklerden oluştuğu ve elementlerin homojen dağılıma sahip olduğu belirlenmiştir. BET sonucuna göre ise CuFeV-LDH’nin yüzey alanı 238.59 m² g⁻¹ olarak bulunmuştur. Üretilen bu malzeme kullanılarak Fenton benzeri katalitik oksidasyon yöntemi ile metilen mavisi giderim performansı incelenmiştir. Metilen mavisi giderim deneyleri üç farklı katalizör miktarı (0.5, 1, 1.5 g/L) varlığında gerçekleştirilmiştir. Katalizör miktarı için optimum değer olarak 1g/L belirlenmiş ve kinetik çalışmalar bu değer sabit tutularak gerçekleştirilmiştir. Metilen mavisi giderim performansı 45oC de, 1g/L katalizör ve 100 mM H2O2 varlığında % 85’e ulaşmıştır. Kinetik çalışma analizleri sonucu, reaksiyonun birinci ve ikinci dereceden kinetik modele uyduğunu göstermiştir. CuFeV-LDH katalizörünün Fenton benzeri sistemler için önemli bir potansiyele sahip olduğunu göstermektedir.
- 30 April 2026
- Published by Cankiri Karatekin Universitesi in Alfa Mühendislik ve Uygulamalı Bilimler Dergisi
- Vol. 4 (1) , 10-22
Open AccessÜç Metalli CuFeV-LDH Yapısı Sentezi, Karakterizasyonu ve Metilen Mavisi Giderimi Üzerine Etkisi
LDH yapıları, esnek ve uyarlanabilir özelliklere sahip olması sayesinde belirli bir uygulama için modifiye edilebilmektedir. Bu çalışmada, CuFeV-LDH yapısı sentezlenmiş ve XRD, FTIR, FE-SEM ve BET gibi analiz yöntemleri ile karakterize edilerek yapısı ortaya koyulmuştur. XRD sonucu malzemenin yüksek kristal yapıya sahip olduğunu göstermiştir. FE-SEM sonucuna göre yapının nano boyutlu küresel taneciklerden oluştuğu ve elementlerin homojen dağılıma sahip olduğu belirlenmiştir. BET sonucuna göre ise CuFeV-LDH’nin yüzey alanı 238.59 m² g⁻¹ olarak bulunmuştur. Üretilen bu malzeme kullanılarak Fenton benzeri katalitik oksidasyon yöntemi ile metilen mavisi giderim performansı incelenmiştir. Metilen mavisi giderim deneyleri üç farklı katalizör miktarı (0.5, 1, 1.5 g/L) varlığında gerçekleştirilmiştir. Katalizör miktarı için optimum değer olarak 1g/L belirlenmiş ve kinetik çalışmalar bu değer sabit tutularak gerçekleştirilmiştir. Metilen mavisi giderim performansı 45oC de, 1g/L katalizör ve 100 mM H2O2 varlığında % 85’e ulaşmıştır. Kinetik çalışma analizleri sonucu, reaksiyonun birinci ve ikinci dereceden kinetik modele uyduğunu göstermiştir. CuFeV-LDH katalizörünün Fenton benzeri sistemler için önemli bir potansiyele sahip olduğunu göstermektedir.
- Open Access
Investigation of Malachite Green Removal by Fenton-like Oxidation Using Cobalt-Based Co-BTCA Catalysts
Malachite Green (MG) is a synthetic dye widely used in various industries, especially in textile and paper manufacturing. Once released into aquatic environments, it exhibits toxic effects, poses a threat to aquatic ecosystems, and causes persistent pollution due to its resistance to biodegradation. Therefore, the effective and sustainable removal of MG from water sources is of great importance for environmental protection. In this study, a metal–organic framework (MOF) structure named Co-BTCA was synthesized using a linker, 1,2,4,5-benzenetetracarboxylic acid (BTCA). The synthesized Co-BTCA catalyst was applied for the removal of MG from wastewater via a Fenton-like oxidation process. The MOF structure was thoroughly characterized using various techniques. An MG removal efficiency of 91% was achieved at 26 °C within 30 min. An MG removal efficiency of 99.4% was achieved at 38 °C within 20 min. Kinetic analyses conducted at two different temperatures indicated that the reaction follows a first-order kinetic model. These results demonstrate that the Co-BTCA catalyst is an environmentally friendly and highly efficient candidate for Fenton-like systems.
Open AccessInvestigation of Malachite Green Removal by Fenton-like Oxidation Using Cobalt-Based Co-BTCA Catalysts
Malachite Green (MG) is a synthetic dye widely used in various industries, especially in textile and paper manufacturing. Once released into aquatic environments, it exhibits toxic effects, poses a threat to aquatic ecosystems, and causes persistent pollution due to its resistance to biodegradation. Therefore, the effective and sustainable removal of MG from water sources is of great importance for environmental protection. In this study, a metal–organic framework (MOF) structure named Co-BTCA was synthesized using a linker, 1,2,4,5-benzenetetracarboxylic acid (BTCA). The synthesized Co-BTCA catalyst was applied for the removal of MG from wastewater via a Fenton-like oxidation process. The MOF structure was thoroughly characterized using various techniques. An MG removal efficiency of 91% was achieved at 26 °C within 30 min. An MG removal efficiency of 99.4% was achieved at 38 °C within 20 min. Kinetic analyses conducted at two different temperatures indicated that the reaction follows a first-order kinetic model. These results demonstrate that the Co-BTCA catalyst is an environmentally friendly and highly efficient candidate for Fenton-like systems.
- Open Access
- 5 July 2025
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 50 (24) , 20967-20983
Cobalt/Copper Doped Bimetallic Zeolitic Imidazolate Frameworks as Peroxymonosulfate Activators for the Removal of Veterinary Antibiotics: Response Surface Modeling and Optimization of Reaction Parameters
Activation of peroxymonosulfate (PMS) by Co and Cu doped zeolitic imidazolate framework, ZIF-8 s for degradation of sulfamethazine (SMZ) was investigated. It was observed that combination of the two metals increased the PMS activation efficiency by using the activity of both metal redox pairs to increase the production of sulfate and hydroxyl radicals. Different characterization techniques, including nitrogen (N 2 ) adsorption, Fourier-transform infrared (FTIR), scanning electron microscopy energy-dispersive spectroscopy (SEM–EDS mapping), X-ray photoelectron spectroscopy (XPS), and thermogravimetric analysis (TGA), were used to characterize the synthesized catalysts, ZIF-8, Cu/ZIF-8, and Co/ZIF-8. No structural differences were observed in catalysts obtained after bimetallic synthesis. The BET surface area was calculated as 1145, 742, 945 m 2 /g for ZIF-8, Cu/ZIF-8, and Co/ZIF-8, respectively. Under reaction conditions of 0.1 g/L PMS dosage, 0.5 g/L catalyst dosage, and original pH, sulfamethazine degradation after 30 min was 10.5% with PMS alone (no catalyst), 28.0% with ZIF-8, 33.9% with Cu/ZIF-8, and 58.4% with Co/ZIF-8, clearly demonstrating the superior catalytic performance of Co/ZIF-8. Using Box–Behnken design and response surface methodology, reaction parameters were optimized in the presence of the most efficient catalyst, Co/ZIF-8. The sulfamethazine removal was optimized at 0.55 g/L catalyst dosage, pH 5.2 and 0.15 g/L PMS dosage. Under the optimal reaction conditions 67.3% sulfamethazine removal was achieved within 30 min in the presence of Co/ZIF-8 as catalyst. Scavenging experiments showed that the dominant reactive oxygen species was hydroxyl radicals. According to the phytotoxicity test performed by using L. sativum, 35.9% growth inhibition was evaluated.
- 5 July 2025
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 50 (24) , 20967-20983
Open AccessCobalt/Copper Doped Bimetallic Zeolitic Imidazolate Frameworks as Peroxymonosulfate Activators for the Removal of Veterinary Antibiotics: Response Surface Modeling and Optimization of Reaction Parameters
Activation of peroxymonosulfate (PMS) by Co and Cu doped zeolitic imidazolate framework, ZIF-8 s for degradation of sulfamethazine (SMZ) was investigated. It was observed that combination of the two metals increased the PMS activation efficiency by using the activity of both metal redox pairs to increase the production of sulfate and hydroxyl radicals. Different characterization techniques, including nitrogen (N 2 ) adsorption, Fourier-transform infrared (FTIR), scanning electron microscopy energy-dispersive spectroscopy (SEM–EDS mapping), X-ray photoelectron spectroscopy (XPS), and thermogravimetric analysis (TGA), were used to characterize the synthesized catalysts, ZIF-8, Cu/ZIF-8, and Co/ZIF-8. No structural differences were observed in catalysts obtained after bimetallic synthesis. The BET surface area was calculated as 1145, 742, 945 m 2 /g for ZIF-8, Cu/ZIF-8, and Co/ZIF-8, respectively. Under reaction conditions of 0.1 g/L PMS dosage, 0.5 g/L catalyst dosage, and original pH, sulfamethazine degradation after 30 min was 10.5% with PMS alone (no catalyst), 28.0% with ZIF-8, 33.9% with Cu/ZIF-8, and 58.4% with Co/ZIF-8, clearly demonstrating the superior catalytic performance of Co/ZIF-8. Using Box–Behnken design and response surface methodology, reaction parameters were optimized in the presence of the most efficient catalyst, Co/ZIF-8. The sulfamethazine removal was optimized at 0.55 g/L catalyst dosage, pH 5.2 and 0.15 g/L PMS dosage. Under the optimal reaction conditions 67.3% sulfamethazine removal was achieved within 30 min in the presence of Co/ZIF-8 as catalyst. Scavenging experiments showed that the dominant reactive oxygen species was hydroxyl radicals. According to the phytotoxicity test performed by using L. sativum, 35.9% growth inhibition was evaluated.
- 13 June 2025
- Published by Wiley in ChemistrySelect
- Vol. 10 (23)
Hydrophobic and Catalytic Properties MOF Decorated Cotton Fabrics: Comparison of Biopolymeric Coating and Chemical Modification
Environmental contamination from pharmaceutical residues and oily wastewater poses serious challenges for modern water treatment technologies. In this study, we developed multifunctional, highly hydrophobic cotton textiles through in situ growth of ZIF‐8 and cobalt‐doped ZIF‐8 (Co/ZIF‐8) on cotton fabrics at room temperature using a simple immersion method. To further enhance hydrophobicity, the coated fabrics were treated with octadecylamine (OA) and beeswax (BW), resulting in water contact angles ranging from 116° to 132°. The modified fabrics were evaluated for their catalytic performance in degrading oxytetracycline hydrochloride (OTC‐HCl) via peroxymonosulfate (PMS)‐based advanced oxidation processes (AOPs). Results showed significant improvement in degradation efficiency, with Co/ZIF‐8@CT achieving 85.9% and ZIF‐8@CT 69.9% degradation, compared to just 23.57% without a catalyst. Coating with OA and BW slightly reduced the degradation rate (62.3% and 60.8%) due to restricted molecular diffusion. Additionally, the treated textiles demonstrated high oil–water separation efficiencies (86–97%) and excellent self‐cleaning performance, effectively removing Methylene Blue powder from their surfaces. These properties highlight the potential of the developed materials in addressing both pharmaceutical pollution and oily wastewater. Overall, the study presents a scalable, low‐temperature strategy for fabricating reusable, multifunctional textiles for advanced environmental remediation and sustainable wastewater treatment applications.
- 13 June 2025
- Published by Wiley in ChemistrySelect
- Vol. 10 (23)
Hydrophobic and Catalytic Properties MOF Decorated Cotton Fabrics: Comparison of Biopolymeric Coating and Chemical Modification
Environmental contamination from pharmaceutical residues and oily wastewater poses serious challenges for modern water treatment technologies. In this study, we developed multifunctional, highly hydrophobic cotton textiles through in situ growth of ZIF‐8 and cobalt‐doped ZIF‐8 (Co/ZIF‐8) on cotton fabrics at room temperature using a simple immersion method. To further enhance hydrophobicity, the coated fabrics were treated with octadecylamine (OA) and beeswax (BW), resulting in water contact angles ranging from 116° to 132°. The modified fabrics were evaluated for their catalytic performance in degrading oxytetracycline hydrochloride (OTC‐HCl) via peroxymonosulfate (PMS)‐based advanced oxidation processes (AOPs). Results showed significant improvement in degradation efficiency, with Co/ZIF‐8@CT achieving 85.9% and ZIF‐8@CT 69.9% degradation, compared to just 23.57% without a catalyst. Coating with OA and BW slightly reduced the degradation rate (62.3% and 60.8%) due to restricted molecular diffusion. Additionally, the treated textiles demonstrated high oil–water separation efficiencies (86–97%) and excellent self‐cleaning performance, effectively removing Methylene Blue powder from their surfaces. These properties highlight the potential of the developed materials in addressing both pharmaceutical pollution and oily wastewater. Overall, the study presents a scalable, low‐temperature strategy for fabricating reusable, multifunctional textiles for advanced environmental remediation and sustainable wastewater treatment applications.
- Open Access
- 28 February 2025
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 15 (14) , 21227-21246
Comparison of 2D and 3D numerical simulation of woody biomass combustion in fluidized bed reactor
Biomass, a sustainable energy source, can be utilized to produce chemicals, heat, and electricity. For this purpose, studies on the gasification of woody biomass in fluidized bed reactors are of interest. CFD simulations are commonly utilized for designing and optimizing processes. In computational fluid dynamics (CFD) solutions, 2D and 3D modeling have different advantages and disadvantages in terms of accuracy and computational power. 2D simulations offer quicker results and are adequate for acquiring the majority of pertinent parameters. Conversely, 3D methods are primarily required for meticulous analysis and optimization purposes. The current investigation aims to examine the gasification process in a fluidized bed through the use of CFD. This research involves performing 2D and 3D CFD simulations to examine the devolatilization characteristics of woody biomass in the fluidized bed reactor. The focus of the study is to evaluate the ability of 2D simulation studies to represent 3D simulation studies. The research investigated the behaviors of gas–solid flow modeling using ANSYS 16.0.
- 28 February 2025
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 15 (14) , 21227-21246
Open AccessComparison of 2D and 3D numerical simulation of woody biomass combustion in fluidized bed reactor
Biomass, a sustainable energy source, can be utilized to produce chemicals, heat, and electricity. For this purpose, studies on the gasification of woody biomass in fluidized bed reactors are of interest. CFD simulations are commonly utilized for designing and optimizing processes. In computational fluid dynamics (CFD) solutions, 2D and 3D modeling have different advantages and disadvantages in terms of accuracy and computational power. 2D simulations offer quicker results and are adequate for acquiring the majority of pertinent parameters. Conversely, 3D methods are primarily required for meticulous analysis and optimization purposes. The current investigation aims to examine the gasification process in a fluidized bed through the use of CFD. This research involves performing 2D and 3D CFD simulations to examine the devolatilization characteristics of woody biomass in the fluidized bed reactor. The focus of the study is to evaluate the ability of 2D simulation studies to represent 3D simulation studies. The research investigated the behaviors of gas–solid flow modeling using ANSYS 16.0.
- Open Access
- 8 January 2025
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 50 (13) , 9891-9904
Energy-Efficient Synthesis of Copper Terephthalate Metal–Organic Frameworks Using Sorbitol and Choline Chloride-Based Deep Eutectic Solvents for Methylene Blue Removal
Metal–organic frameworks (MOFs) are considered promising candidates for organic pollutant remediation due to their adaptable topology, large surface area, porous structure and unsaturated metal sites. This study presents a novel, safe, environmentally friendly and energy-efficient method for synthesizing copper terephthalate metal–organic frameworks (Cu-BDC). The synthesis utilizes choline chloride/sorbitol deep eutectic solvent (DES), a green solvent, which allows for milder synthesis conditions. The use of DES in Cu-BDC synthesis was calculated to provide up to 99% energy savings compared to traditional method, showcasing the energy efficiency of this approach. Methylene blue (MB) adsorption using the synthesized samples was investigated. MB was selected as a model molecule because of its toxicity and persistence in the aquatic environment. Compared to Cu-BDC, Cu-BDC-D (synthesized form in DES) showed greater effectiveness in adsorption of MB with 98.7% removal at 10 g/L catalyst dosage, pH 7, 100 mg/L MB initial concentration and at 25 °C. The effects of various parameters, including adsorbent dosage, pH and temperature, on adsorption capacity were examined. The kinetic data were analyzed using both pseudo-first-order and pseudo-second-order kinetic models. The results indicated that the adsorption kinetics followed the pseudo-second-order model, and the Weber and Morris intraparticle diffusion model and Chrastil diffusion models were employed to further investigate the diffusion processes involved in adsorption. Additionally, the Langmuir, Freundlich and Sips isotherm models were analyzed, with the Langmuir isotherm providing the best fit. Desorption experiments demonstrated that the adsorbent could be reused up to three times. This study highlights the potential of MOF obtained in DES as an effective and sustainable adsorbent for dye removal in water treatment applications.
- 8 January 2025
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 50 (13) , 9891-9904
Open AccessEnergy-Efficient Synthesis of Copper Terephthalate Metal–Organic Frameworks Using Sorbitol and Choline Chloride-Based Deep Eutectic Solvents for Methylene Blue Removal
Metal–organic frameworks (MOFs) are considered promising candidates for organic pollutant remediation due to their adaptable topology, large surface area, porous structure and unsaturated metal sites. This study presents a novel, safe, environmentally friendly and energy-efficient method for synthesizing copper terephthalate metal–organic frameworks (Cu-BDC). The synthesis utilizes choline chloride/sorbitol deep eutectic solvent (DES), a green solvent, which allows for milder synthesis conditions. The use of DES in Cu-BDC synthesis was calculated to provide up to 99% energy savings compared to traditional method, showcasing the energy efficiency of this approach. Methylene blue (MB) adsorption using the synthesized samples was investigated. MB was selected as a model molecule because of its toxicity and persistence in the aquatic environment. Compared to Cu-BDC, Cu-BDC-D (synthesized form in DES) showed greater effectiveness in adsorption of MB with 98.7% removal at 10 g/L catalyst dosage, pH 7, 100 mg/L MB initial concentration and at 25 °C. The effects of various parameters, including adsorbent dosage, pH and temperature, on adsorption capacity were examined. The kinetic data were analyzed using both pseudo-first-order and pseudo-second-order kinetic models. The results indicated that the adsorption kinetics followed the pseudo-second-order model, and the Weber and Morris intraparticle diffusion model and Chrastil diffusion models were employed to further investigate the diffusion processes involved in adsorption. Additionally, the Langmuir, Freundlich and Sips isotherm models were analyzed, with the Langmuir isotherm providing the best fit. Desorption experiments demonstrated that the adsorbent could be reused up to three times. This study highlights the potential of MOF obtained in DES as an effective and sustainable adsorbent for dye removal in water treatment applications.
- 16 December 2024
- Published by Springer Nature in Catalysis Surveys from Asia
- Vol. 29 (2) , 127-138
Catalytic Production of Glycerol Carbonate from Glycerol Using Sunflower Stalk-Derived Biochars: Fabrication, Characterization, and Performance Evaluation
- 16 December 2024
- Published by Springer Nature in Catalysis Surveys from Asia
- Vol. 29 (2) , 127-138
Catalytic Production of Glycerol Carbonate from Glycerol Using Sunflower Stalk-Derived Biochars: Fabrication, Characterization, and Performance Evaluation
- 14 October 2024
- Published by Omer Halisdemir Universitesi in Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi
Demir Katkılı Zeolitik İmidazol Ağ Yapısı Katalizörler Kullanılarak Fenton Benzeri Oksidasyonu ile Kristal Viyole Gideriminde Reaksiyon Parametrelerinin ve Kinetiğinin İncelenmesi
Kristal Viyole (KV), tekstil ve kâğıt endüstrilerinde yaygın olarak kullanılan sentetik bir boyadır. Bu boya, çevreye atıldığında su kaynaklarında kalıcı kirliliğe yol açabilir, biyolojik olarak parçalanması zordur ve toksik etkileri nedeniyle sucul yaşamı olumsuz etkiler. Bu nedenle, KV'nin su kaynaklarından etkin bir şekilde giderilmesi büyük önem taşır. KV'nin giderimi, çevre sağlığının korunması, ekosistem dengesinin sürdürülebilmesi ve insan sağlığının olumsuz etkilenmesinin önlenmesi açısından kritik bir konudur. Bu çalışmada Demir yüklü ZIF-8 sentezi gerçekleştirilmiştir (Fe/ZIF-8). Zeolit imidazol ağ yapıları, yüksek kimyasal stabilite ve esneklik sergileyen ve reaksiyonlarda, gaz ayırma ve saflaştırma, gibi uygulamalarda kullanılan çok sağlam yapıya sahip gözenekli koordinasyon polimerleridir. Düşük üretim maliyetleri, kolay sentez yöntemleri ve işlevselleştirilebilirliği nedeniyle atık su arıtım proseslerinde kullanılmak üzere zeolit imidazol ağ yapıları seçilmiştir. Sentezlenen Fe yüklü ZIF-8 Fenton benzeri oksidasyonu yöntemi ile atık sulardan Kristal Viyole uzaklaştırılmasında kullanılmıştır. Fenton benzeri oksidasyonunda Fe-ZIF-8 kullanımı ile 60 dakikada %99,6 kristal viyole giderimi sağlanmış ve gerçekleştirilen kinetik çalışmalarda boya gideriminin birinci mertebeden reaksiyon kinetiğine uyduğu belirlenmiştir.
- 14 October 2024
- Published by Omer Halisdemir Universitesi in Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi
Demir Katkılı Zeolitik İmidazol Ağ Yapısı Katalizörler Kullanılarak Fenton Benzeri Oksidasyonu ile Kristal Viyole Gideriminde Reaksiyon Parametrelerinin ve Kinetiğinin İncelenmesi
Kristal Viyole (KV), tekstil ve kâğıt endüstrilerinde yaygın olarak kullanılan sentetik bir boyadır. Bu boya, çevreye atıldığında su kaynaklarında kalıcı kirliliğe yol açabilir, biyolojik olarak parçalanması zordur ve toksik etkileri nedeniyle sucul yaşamı olumsuz etkiler. Bu nedenle, KV'nin su kaynaklarından etkin bir şekilde giderilmesi büyük önem taşır. KV'nin giderimi, çevre sağlığının korunması, ekosistem dengesinin sürdürülebilmesi ve insan sağlığının olumsuz etkilenmesinin önlenmesi açısından kritik bir konudur. Bu çalışmada Demir yüklü ZIF-8 sentezi gerçekleştirilmiştir (Fe/ZIF-8). Zeolit imidazol ağ yapıları, yüksek kimyasal stabilite ve esneklik sergileyen ve reaksiyonlarda, gaz ayırma ve saflaştırma, gibi uygulamalarda kullanılan çok sağlam yapıya sahip gözenekli koordinasyon polimerleridir. Düşük üretim maliyetleri, kolay sentez yöntemleri ve işlevselleştirilebilirliği nedeniyle atık su arıtım proseslerinde kullanılmak üzere zeolit imidazol ağ yapıları seçilmiştir. Sentezlenen Fe yüklü ZIF-8 Fenton benzeri oksidasyonu yöntemi ile atık sulardan Kristal Viyole uzaklaştırılmasında kullanılmıştır. Fenton benzeri oksidasyonunda Fe-ZIF-8 kullanımı ile 60 dakikada %99,6 kristal viyole giderimi sağlanmış ve gerçekleştirilen kinetik çalışmalarda boya gideriminin birinci mertebeden reaksiyon kinetiğine uyduğu belirlenmiştir.
- Open Access
- 1 October 2024
- Published by Afyon Kocatepe Universitesi Fen Ve Muhendislik Bilimleri Dergisi in Afyon Kocatepe University Journal of Sciences and Engineering
- Vol. 24 (5) , 1235-1241
Modifiye Hummers Yöntemi ile Grafen Oksit Sentezinde Bor Bileşiklerinin Kullanılması
Bu çalışmada grafitten Hummers Tour metodu ile grafen oksit sentezinin performans değerlendirilmesi üzerinde durulmuştur. Hummers Tour metodunda tüm şartlar aynı kalacak şekilde sadece fosforik asit, borik asit veya boraks dekahidrat bileşikleri değiştirilerek, bu kimyasalların grafen oksit sentezi üzerindeki etkilerinin değerlendirilmesi hedeflenmiştir. Grafen oksit örneklerinde; BET analizi ile yüzey alan (YA), FTIR ile yapı karakterizasyonu, ZETA-SIZER ile Zeta Potansiyeli (ZP) ve Parçacık boyut dağılımı (PB), SEM+EDS ile oksidasyon dereceleri (C/O), XRD analizi ile kristal boyutu (KB) ve Raman analizi ile yapıdaki kusur oranı (ID/IG) analiz edilerek, örnekler arasındaki iyileşme oranları belirlenmiştir. İyileşme oranları grafit örneğinin özellikleri referans alınarak belirlenmiştir. İyileşme oranları için en iyi sonuçlar; YA için % 7,7 ve PB için %37,9 ile fosforik asit ile sentezlenen grafen oksit örneğinde ve C/O oranı için %97,4 , ZP için %100,5 ve KB için ise % 84,30 ile boraks dekahidrat ile sentezlenen grafen oksit örneğinde elde edilmiştir. D/G için iyi iyileşme oranı % 67,85 ile borik asit le sentezlenen grafen oksit örneğinde elde edilmiştir. Çalışma sonuçları göstermiştir ki grafen oksit sentezinde fosforik asit yerine bor bileşiklerinin kullanılması avantajlı olmaktadır.
- 1 October 2024
- Published by Afyon Kocatepe Universitesi Fen Ve Muhendislik Bilimleri Dergisi in Afyon Kocatepe University Journal of Sciences and Engineering
- Vol. 24 (5) , 1235-1241
Open AccessModifiye Hummers Yöntemi ile Grafen Oksit Sentezinde Bor Bileşiklerinin Kullanılması
Bu çalışmada grafitten Hummers Tour metodu ile grafen oksit sentezinin performans değerlendirilmesi üzerinde durulmuştur. Hummers Tour metodunda tüm şartlar aynı kalacak şekilde sadece fosforik asit, borik asit veya boraks dekahidrat bileşikleri değiştirilerek, bu kimyasalların grafen oksit sentezi üzerindeki etkilerinin değerlendirilmesi hedeflenmiştir. Grafen oksit örneklerinde; BET analizi ile yüzey alan (YA), FTIR ile yapı karakterizasyonu, ZETA-SIZER ile Zeta Potansiyeli (ZP) ve Parçacık boyut dağılımı (PB), SEM+EDS ile oksidasyon dereceleri (C/O), XRD analizi ile kristal boyutu (KB) ve Raman analizi ile yapıdaki kusur oranı (ID/IG) analiz edilerek, örnekler arasındaki iyileşme oranları belirlenmiştir. İyileşme oranları grafit örneğinin özellikleri referans alınarak belirlenmiştir. İyileşme oranları için en iyi sonuçlar; YA için % 7,7 ve PB için %37,9 ile fosforik asit ile sentezlenen grafen oksit örneğinde ve C/O oranı için %97,4 , ZP için %100,5 ve KB için ise % 84,30 ile boraks dekahidrat ile sentezlenen grafen oksit örneğinde elde edilmiştir. D/G için iyi iyileşme oranı % 67,85 ile borik asit le sentezlenen grafen oksit örneğinde elde edilmiştir. Çalışma sonuçları göstermiştir ki grafen oksit sentezinde fosforik asit yerine bor bileşiklerinin kullanılması avantajlı olmaktadır.