Ariel Friedman
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ariel Friedman has a total of 93 co-authors. Here are the top co-authors by number of shared publications:
- Lior Elbaz
Chemistry Department, Bar‐Ilan Center for Nanotechnology and Advanced Materials Bar‐Ilan University Ramat‐Gan 5290002 Israel
11 shared publications Radenka Maric
Center For Clean Energy Engineering Innovation Partnership Building University of Connecticut Storrs Connecticut United States
5 shared publicationsIram Sifat
University of Connecticut
4 shared publicationsAlexandra Oliveira
Mott Corporation
3 shared publicationsJasna Jankovic
University of Connecticut
3 shared publications- Kevin Yang
Department of Chemical Engineering, Northeastern University, Boston, Massachusetts 02115, USA
3 shared publications
Latest Publications
Complex Displacement Deposition: A Self‐Templating Mechanism for Forming High‐Surface‐Area Catalysts
Controlling the structure and composition of metal deposits is central to advancing electrocatalysis and functional materials. Here, we introduce Complex Displacement Deposition (CDD), a general electrodeposition framework in which an electrochemically inert displacing agent competes with a target metal for a shared complexing agent, decoupling precipitation from metal reduction and granting access to architectures unattainable by conventional electrodeposition. We demonstrate CDD using the Cu‐citrate‐Ca system, in which interfacial alkalinization drives Ca 2+ to displace Cu 2+ from its citrate complex, producing a previously unreported ternary Ca‐Cu‐citrate‐hydroxide phase. The reversible formation and electrochemical reduction of this phase establish a dynamic self‐templating cycle that generates hierarchical, high‐surface‐area copper networks. Evaluated for the electrochemical nitrate reduction reaction, these electrodes achieve partial current densities of 302 mA cm −2 and ammonia yield rates of 1.41 mmol h −1 cm −2 , exceeding comparable metallic copper and many other copper‐based catalysts. Based on these results, we identify within CDD two thermodynamically distinct displacement regimes. An indirect regime, demonstrated here, proceeds through a ternary intermediate. A direct regime, predicted thermodynamically but not demonstrated here, yields a pure metal hydroxide. CDD thus establishes a modular strategy for electrodepositing high‐surface‐area metals, metal‐oxide composites, and compositionally complex architectures.
Complex Displacement Deposition: A Self‐Templating Mechanism for Forming High‐Surface‐Area Catalysts
Controlling the structure and composition of metal deposits is central to advancing electrocatalysis and functional materials. Here, we introduce Complex Displacement Deposition (CDD), a general electrodeposition framework in which an electrochemically inert displacing agent competes with a target metal for a shared complexing agent, decoupling precipitation from metal reduction and granting access to architectures unattainable by conventional electrodeposition. We demonstrate CDD using the Cu‐citrate‐Ca system, in which interfacial alkalinization drives Ca 2+ to displace Cu 2+ from its citrate complex, producing a previously unreported ternary Ca‐Cu‐citrate‐hydroxide phase. The reversible formation and electrochemical reduction of this phase establish a dynamic self‐templating cycle that generates hierarchical, high‐surface‐area copper networks. Evaluated for the electrochemical nitrate reduction reaction, these electrodes achieve partial current densities of 302 mA cm −2 and ammonia yield rates of 1.41 mmol h −1 cm −2 , exceeding comparable metallic copper and many other copper‐based catalysts. Based on these results, we identify within CDD two thermodynamically distinct displacement regimes. An indirect regime, demonstrated here, proceeds through a ternary intermediate. A direct regime, predicted thermodynamically but not demonstrated here, yields a pure metal hydroxide. CDD thus establishes a modular strategy for electrodepositing high‐surface‐area metals, metal‐oxide composites, and compositionally complex architectures.
- Open Access
- 26 August 2026
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 16 (17) , 16768-16781
Dual Demetallation Pathways Govern the Durability of Fe–N–C in Oxygen-Depolarized Cathode HCl Electrolysis
Nitrogen-coordinated Fe on carbon defect surfaces, commonly referred to as Fe–N–C, shows great potential as a highly active and Cl-poisoning-resistant catalyst for oxygen-depolarized cathode (ODC) HCl electrolysis. However, its durability remains unexplored under the corrosive operating conditions of the HCl electrolysis. To address this, we investigate the stability of Fe–N–C in HCl electrolysis via sustained constant current and uncontrolled shutdowns, mimicking the harsh transients of industrial operation. End-of-test analysis of Fe–N–C using X-ray absorption and 57Fe Mössbauer spectroscopy reveals stable intermediate-spin Fe(II)–N4 and high-spin Fe(II)–N4, allowing Fe–N–C to maintain its high activity. Despite these structural changes, Fe–N–C maintained a competitive low voltage of 1.33 V at 0.5 A cm–2. Accelerated stress tests simulating uncontrolled shutdown conditions, combined with Raman spectroscopy, showed that Fe–N–C and RhxSy/C share a common carbon degradation mechanism. This work identifies durable Fe–N4 moieties in the corrosive conditions of HCl electrolysis and demonstrates the resilience of Fe–N–C as a robust ODC catalyst, guiding improved catalyst design.
- 26 August 2026
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 16 (17) , 16768-16781
Open AccessDual Demetallation Pathways Govern the Durability of Fe–N–C in Oxygen-Depolarized Cathode HCl Electrolysis
Nitrogen-coordinated Fe on carbon defect surfaces, commonly referred to as Fe–N–C, shows great potential as a highly active and Cl-poisoning-resistant catalyst for oxygen-depolarized cathode (ODC) HCl electrolysis. However, its durability remains unexplored under the corrosive operating conditions of the HCl electrolysis. To address this, we investigate the stability of Fe–N–C in HCl electrolysis via sustained constant current and uncontrolled shutdowns, mimicking the harsh transients of industrial operation. End-of-test analysis of Fe–N–C using X-ray absorption and 57Fe Mössbauer spectroscopy reveals stable intermediate-spin Fe(II)–N4 and high-spin Fe(II)–N4, allowing Fe–N–C to maintain its high activity. Despite these structural changes, Fe–N–C maintained a competitive low voltage of 1.33 V at 0.5 A cm–2. Accelerated stress tests simulating uncontrolled shutdown conditions, combined with Raman spectroscopy, showed that Fe–N–C and RhxSy/C share a common carbon degradation mechanism. This work identifies durable Fe–N4 moieties in the corrosive conditions of HCl electrolysis and demonstrates the resilience of Fe–N–C as a robust ODC catalyst, guiding improved catalyst design.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (41) , 2090
Complex Displacement Deposition: A Self-Templating Mechanism for Forming High-Surface-Area Catalysts
Controlling nanoscale morphology and phase composition during electrodeposition remains a fundamental challenge in the design of electrocatalysts and functional metal coatings. Here we introduce Complex Displacement Deposition (CDD), a new electrodeposition framework that couples metal-ligand coordination chemistry with a competitive precipitating agent (PA) to regulate when and how a solid phase nucleates during metal deposition. Unlike conventional methods that rely on uncontrolled local alkalinization, CDD decouples metal reduction from precipitation by using a PA that competes with the metal for the ligand only under specific interfacial conditions. This mechanistic separation enables precise control over precipitate formation, morphology evolution, and metal/oxide (or metal/complex) ratios.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (41) , 2090
Complex Displacement Deposition: A Self-Templating Mechanism for Forming High-Surface-Area Catalysts
Controlling nanoscale morphology and phase composition during electrodeposition remains a fundamental challenge in the design of electrocatalysts and functional metal coatings. Here we introduce Complex Displacement Deposition (CDD), a new electrodeposition framework that couples metal-ligand coordination chemistry with a competitive precipitating agent (PA) to regulate when and how a solid phase nucleates during metal deposition. Unlike conventional methods that rely on uncontrolled local alkalinization, CDD decouples metal reduction from precipitation by using a PA that competes with the metal for the ligand only under specific interfacial conditions. This mechanistic separation enables precise control over precipitate formation, morphology evolution, and metal/oxide (or metal/complex) ratios.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (36) , 1762
A Rapid, Model-Independent Method for Assessing the Corrosion Behavior of PTL Coatings in PEM Water Electrolyzers
Ensuring the durability and low interfacial resistance of coated titanium porous transport layers (PTLs) is essential for achieving long-term, high-efficiency operation in proton exchange membrane water electrolyzers (PEMWEs). Traditional evaluation approaches often require lengthy tests or rely on complex, assumption-heavy EIS modeling. In this work, we introduce a rapid, model-free methodology in which the low-frequency resistance (LFR) is continuously monitored over time during accelerated corrosion testing, providing a direct and sensitive measure of coating degradation and substrate passivation. In addition to LFR evolution, the method also enables identification of active corrosion processes through the appearance of inductive features in the low-frequency region.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (36) , 1762
A Rapid, Model-Independent Method for Assessing the Corrosion Behavior of PTL Coatings in PEM Water Electrolyzers
Ensuring the durability and low interfacial resistance of coated titanium porous transport layers (PTLs) is essential for achieving long-term, high-efficiency operation in proton exchange membrane water electrolyzers (PEMWEs). Traditional evaluation approaches often require lengthy tests or rely on complex, assumption-heavy EIS modeling. In this work, we introduce a rapid, model-free methodology in which the low-frequency resistance (LFR) is continuously monitored over time during accelerated corrosion testing, providing a direct and sensitive measure of coating degradation and substrate passivation. In addition to LFR evolution, the method also enables identification of active corrosion processes through the appearance of inductive features in the low-frequency region.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (36) , 1763
(Invited) Advanced Porous Transport Layer Design and Manufacturing for PEM Electrolyzers
Green hydrogen powered by renewables has the potential to decarbonize the manufacturing of ammonia, methanol, and other critical chemicals, transforming the chemical industry. However, that opportunity will not be realized without green hydrogen attaining cost parity with the incumbent technology: steam reformed natural gas.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (36) , 1763
(Invited) Advanced Porous Transport Layer Design and Manufacturing for PEM Electrolyzers
Green hydrogen powered by renewables has the potential to decarbonize the manufacturing of ammonia, methanol, and other critical chemicals, transforming the chemical industry. However, that opportunity will not be realized without green hydrogen attaining cost parity with the incumbent technology: steam reformed natural gas.
- 24 April 2026
- Published by Elsevier in Journal of Power Sources
- Vol. 679
Rapid impedance-based durability screening of porous transport layer coatings for PEM water electrolyzers
- 24 April 2026
- Published by Elsevier in Journal of Power Sources
- Vol. 679
Rapid impedance-based durability screening of porous transport layer coatings for PEM water electrolyzers
- Open Access
- 9 February 2026
- Published by Elsevier in SSRN Electronic Journal
Rapid Impedance-Based Durability Screening of Porous Transport Layer Coatings for PEM Water Electrolyzers
Anodes of proton exchange membrane water electrolyzers (PEMWEs) operate under strongly oxidizing conditions, imposing stringent durability requirements on porous transport layers (PTLs). Although metallic coatings are widely used to mitigate titanium passivation and interfacial resistance growth, their stability is typically assessed using disparate, material-specific protocols that limit cross-comparison and standardization. This methodological gap hinders the development of cost-effective alternatives to platinum group metal (PGM) coatings. Here, we introduce a rapid electrochemical method to evaluate PTL coating durability under PEMWE-relevant conditions. The approach employs time-resolved impedance spectroscopy during sustained anodic polarization, focusing on the evolution of low-frequency resistance (LFR) and phase behavior. A central outcome is the definition of a dimensionless Passivation Index (PI), derived from the temporal evolution of LFR, enabling quantitative comparison of degradation kinetics independent of geometric surface area. Using uncoated and Pt-, Au-, and Nb-coated titanium PTLs as model systems, we show that LFR sensitively captures interfacial transport limitations associated with passivation, while inductive impedance features provide diagnostic of active corrosion and coating instability. This method enables rapid discrimination between stable, passivating, and actively corroding interfaces without reliance on material-specific equivalent circuit models or full-cell testing, offering a pathway toward standardized durability screening of electrolyzer materials.
- 9 February 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessRapid Impedance-Based Durability Screening of Porous Transport Layer Coatings for PEM Water Electrolyzers
Anodes of proton exchange membrane water electrolyzers (PEMWEs) operate under strongly oxidizing conditions, imposing stringent durability requirements on porous transport layers (PTLs). Although metallic coatings are widely used to mitigate titanium passivation and interfacial resistance growth, their stability is typically assessed using disparate, material-specific protocols that limit cross-comparison and standardization. This methodological gap hinders the development of cost-effective alternatives to platinum group metal (PGM) coatings. Here, we introduce a rapid electrochemical method to evaluate PTL coating durability under PEMWE-relevant conditions. The approach employs time-resolved impedance spectroscopy during sustained anodic polarization, focusing on the evolution of low-frequency resistance (LFR) and phase behavior. A central outcome is the definition of a dimensionless Passivation Index (PI), derived from the temporal evolution of LFR, enabling quantitative comparison of degradation kinetics independent of geometric surface area. Using uncoated and Pt-, Au-, and Nb-coated titanium PTLs as model systems, we show that LFR sensitively captures interfacial transport limitations associated with passivation, while inductive impedance features provide diagnostic of active corrosion and coating instability. This method enables rapid discrimination between stable, passivating, and actively corroding interfaces without reliance on material-specific equivalent circuit models or full-cell testing, offering a pathway toward standardized durability screening of electrolyzer materials.
- Open Access
- 29 January 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Origin of Instability in Fe-N-C Oxygen-Depolarized Cathodes in HCl Electrolysis
Oxygen depolarized cathode (ODC) catalysts, especially for HCl electrolysis, face challenging corrosive environments that narrow the choice of materials to the current state-of-theart RhxSy/C. Nitrogen-coordinated Fe on carbon defect surfaces, commonly referred to as Fe-N-C, offers a low-cost, highly active, and Cl-poisoning-resistant alternative. However, its long-term durability remains unexplored under the unique operating conditions of the HCl electrolysis. To address this, we investigate the stability of Fe-N-C under simulated uncontrolled shutdowns, mimicking the harsh transients of industrial operation. Post-mortem analysis of Fe-N-C using Xray absorption and 57 Fe Mössbauer spectroscopy reveals a transition from the Fe-N4 coordinating environment to Fe2O3. Despite these structural changes, Fe-N-C maintained a competitive low voltage of 1.33 V at 0.5 A cm⁻ 2 , consistent with a relatively low fraction of sites being affected. Accelerated stress tests simulating uncontrolled shutdown conditions, combined with Raman spectroscopy, showed that Fe-N-C and RhxSy/C share a common carbon degradation mechanism. This work demonstrates the viability of Fe-N-C as a robust ODC catalyst and provides guidance for improving its durability by mitigating demetallation and carbon oxidation.
- 29 January 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessOrigin of Instability in Fe-N-C Oxygen-Depolarized Cathodes in HCl Electrolysis
Oxygen depolarized cathode (ODC) catalysts, especially for HCl electrolysis, face challenging corrosive environments that narrow the choice of materials to the current state-of-theart RhxSy/C. Nitrogen-coordinated Fe on carbon defect surfaces, commonly referred to as Fe-N-C, offers a low-cost, highly active, and Cl-poisoning-resistant alternative. However, its long-term durability remains unexplored under the unique operating conditions of the HCl electrolysis. To address this, we investigate the stability of Fe-N-C under simulated uncontrolled shutdowns, mimicking the harsh transients of industrial operation. Post-mortem analysis of Fe-N-C using Xray absorption and 57 Fe Mössbauer spectroscopy reveals a transition from the Fe-N4 coordinating environment to Fe2O3. Despite these structural changes, Fe-N-C maintained a competitive low voltage of 1.33 V at 0.5 A cm⁻ 2 , consistent with a relatively low fraction of sites being affected. Accelerated stress tests simulating uncontrolled shutdown conditions, combined with Raman spectroscopy, showed that Fe-N-C and RhxSy/C share a common carbon degradation mechanism. This work demonstrates the viability of Fe-N-C as a robust ODC catalyst and provides guidance for improving its durability by mitigating demetallation and carbon oxidation.
- Top Cited PapersOpen Access
- 1 August 2025
- Published by American Chemical Society (ACS) in Chemical Reviews
- Vol. 125 (15) , 6906-6976
Anion-Exchange-Membrane Electrolysis with Alkali-Free Water Feed
Hydrogen is a green and sustainable energy vector that can facilitate the large-scale integration of intermittent renewable energy, renewable fuels for heavy transport, and deep decarbonization of hard-to-abate industries. Anion-exchange-membrane water electrolyzers (AEM-WEs) have several achieved or expected competitive advantages over other electrolysis technologies, including the use of precious metal-free electrocatalysts at both electrodes, fluorine-free hydrocarbon-based ionomeric membranes and bipolar plates based on inexpensive materials. Contrasting the analogous proton-exchange-membrane system (PEM-WE), where pure water is circulated (no support electrolyte), the current generation of AEM-WEs necessitates the circulation of a dilute aqueous alkaline electrolyte for reaching high energy efficiency and durability. For several reasons, including but not limited to lower cost of balance-of-plant, lower operating cost and improved device's lifetime, achieving high cell efficiency and performance using an alkali-free water feed is highly desirable. In this review, we develop and build a foundational understanding of AEM-WEs operating with pure water, as well as discuss the effects of operating with natural water feeds like seawater. After a discussion of the possible advantages of pure-water-fed AEM-WEs, we cover the thermodynamic and kinetic processes involved in AEM-WE, followed by a detailed review of materials and components and their integration in the device. We highlight the influence of electrolyte composition and alkali/electrolyte-free feed on the membrane-electrode assembly, ionomers, electrocatalysts, porous transport layer, bipolar plates and operating configuration. We provide evidence for how the pure water feed engenders several issues related to the degradation of device components and propose mitigation strategies.
- 1 August 2025
- Published by American Chemical Society (ACS) in Chemical Reviews
- Vol. 125 (15) , 6906-6976
Top Cited PapersOpen AccessAnion-Exchange-Membrane Electrolysis with Alkali-Free Water Feed
Hydrogen is a green and sustainable energy vector that can facilitate the large-scale integration of intermittent renewable energy, renewable fuels for heavy transport, and deep decarbonization of hard-to-abate industries. Anion-exchange-membrane water electrolyzers (AEM-WEs) have several achieved or expected competitive advantages over other electrolysis technologies, including the use of precious metal-free electrocatalysts at both electrodes, fluorine-free hydrocarbon-based ionomeric membranes and bipolar plates based on inexpensive materials. Contrasting the analogous proton-exchange-membrane system (PEM-WE), where pure water is circulated (no support electrolyte), the current generation of AEM-WEs necessitates the circulation of a dilute aqueous alkaline electrolyte for reaching high energy efficiency and durability. For several reasons, including but not limited to lower cost of balance-of-plant, lower operating cost and improved device's lifetime, achieving high cell efficiency and performance using an alkali-free water feed is highly desirable. In this review, we develop and build a foundational understanding of AEM-WEs operating with pure water, as well as discuss the effects of operating with natural water feeds like seawater. After a discussion of the possible advantages of pure-water-fed AEM-WEs, we cover the thermodynamic and kinetic processes involved in AEM-WE, followed by a detailed review of materials and components and their integration in the device. We highlight the influence of electrolyte composition and alkali/electrolyte-free feed on the membrane-electrode assembly, ionomers, electrocatalysts, porous transport layer, bipolar plates and operating configuration. We provide evidence for how the pure water feed engenders several issues related to the degradation of device components and propose mitigation strategies.
- 15 April 2025
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 15 (9) , 7040-7052
Advanced Deposition Methods for Mixed Metal Alloys and Hydroxides as High-Performance Catalysts for the Hydrogen Evolution Reaction
- 15 April 2025
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 15 (9) , 7040-7052
Advanced Deposition Methods for Mixed Metal Alloys and Hydroxides as High-Performance Catalysts for the Hydrogen Evolution Reaction