Daniel George
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Daniel George has a total of 129 co-authors. Here are the top co-authors by number of shared publications:
- Douglas Brian Hayman
CSIRO Astronomy and Space Science, PO Box 76, Epping, NSW 1710, Australia
4 shared publications - Michael Kramer
Max-Planck-Institut für Radioastronomie
4 shared publications - Stephanie L. Smith
CSIRO Space and Astronomy, Marsfield, NSW 2122, Australia
4 shared publications - Aaron P. Chippendale
CSIRO Astronomy and Space Science, PO Box 76, Epping, NSW 1710, Australia
3 shared publications Alex Dunning
CSIRO Astronomy & Space Science, Australia Telescope National Facility, P.O. Box 76, Epping, NSW1710, Australia
3 shared publicationsHenry Kanoniuk
CSIRO Astronomy & Space Science, Australia Telescope National Facility, P.O. Box 76, Epping, NSW1710, Australia
3 shared publications
Latest Publications
- Top Cited Papers
- 8 April 2020
- Published by Cambridge University Press (CUP) in Publications of the Astronomical Society of Australia
- Vol. 37
An ultra-wide bandwidth (704 to 4 032 MHz) receiver for the Parkes radio telescope
We describe an ultra-wide-bandwidth, low-frequency receiver recently installed on the Parkes radio telescope. The receiver system provides continuous frequency coverage from 704 to 4032 MHz. For much of the band ( ${\sim}60\%$ ), the system temperature is approximately 22 K and the receiver system remains in a linear regime even in the presence of strong mobile phone transmissions. We discuss the scientific and technical aspects of the new receiver, including its astronomical objectives, as well as the feed, receiver, digitiser, and signal processor design. We describe the pipeline routines that form the archive-ready data products and how those data files can be accessed from the archives. The system performance is quantified, including the system noise and linearity, beam shape, antenna efficiency, polarisation calibration, and timing stability.- 8 April 2020
- Published by Cambridge University Press (CUP) in Publications of the Astronomical Society of Australia
- Vol. 37
Top Cited PapersAn ultra-wide bandwidth (704 to 4 032 MHz) receiver for the Parkes radio telescope
We describe an ultra-wide-bandwidth, low-frequency receiver recently installed on the Parkes radio telescope. The receiver system provides continuous frequency coverage from 704 to 4032 MHz. For much of the band ( ${\sim}60\%$ ), the system temperature is approximately 22 K and the receiver system remains in a linear regime even in the presence of strong mobile phone transmissions. We discuss the scientific and technical aspects of the new receiver, including its astronomical objectives, as well as the feed, receiver, digitiser, and signal processor design. We describe the pipeline routines that form the archive-ready data products and how those data files can be accessed from the archives. The system performance is quantified, including the system noise and linearity, beam shape, antenna efficiency, polarisation calibration, and timing stability. - 1 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 0343-0346
Ultra Wideband (UWB) Receiver for Radio Astronomy
Advancements in receiver technology have been crucial for probing radio-frequency signals from distant sources. The survey speed of a radio telescope represents a critical constraint on astronomical observations and can be expressed in broad terms as the product of bandwidth, field of view and squared sensitivity [1]. Recent advances in digital signal processing allow receivers to provide greater bandwidth and field of view, improving survey speed for any given sensitivity. This paper discusses the fundamental radio telescope design principles, recent design challenges and progress made towards realizing a single feed L-S band receiver system covering from 704 MHz to 4032 MHz. The system design with emphasis on warm (non-cryogenic) electronics, impact of external Radio Frequency Interference (RFI) on the receiver and the commissioning results of the system on the 64m Parkes Radio Telescope in Australia are presented in this paper.
- 1 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 0343-0346
Ultra Wideband (UWB) Receiver for Radio Astronomy
Advancements in receiver technology have been crucial for probing radio-frequency signals from distant sources. The survey speed of a radio telescope represents a critical constraint on astronomical observations and can be expressed in broad terms as the product of bandwidth, field of view and squared sensitivity [1]. Recent advances in digital signal processing allow receivers to provide greater bandwidth and field of view, improving survey speed for any given sensitivity. This paper discusses the fundamental radio telescope design principles, recent design challenges and progress made towards realizing a single feed L-S band receiver system covering from 704 MHz to 4032 MHz. The system design with emphasis on warm (non-cryogenic) electronics, impact of external Radio Frequency Interference (RFI) on the receiver and the commissioning results of the system on the 64m Parkes Radio Telescope in Australia are presented in this paper.
- 1 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 403-404
New Receiver Technology for Radio Astronomy : A Technology Update from CSIRO and FAST
Radio astronomy receiver development is focusing on increasing the field of view and bandwidth in tandem with the exponential increase in data volumes permitted by signal processing. We present recent receiver and signal processing developments from CSIRO and FAST.
- 1 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 403-404
New Receiver Technology for Radio Astronomy : A Technology Update from CSIRO and FAST
Radio astronomy receiver development is focusing on increasing the field of view and bandwidth in tandem with the exponential increase in data volumes permitted by signal processing. We present recent receiver and signal processing developments from CSIRO and FAST.
- 1 September 2017
- Published by Cambridge University Press (CUP) in Proceedings of the International Astronomical Union
- Vol. 13 (S337) , 330-331
Early results of a Phased Array Feed system at Effelsberg
The overview of a Phased Array Feed (PAF) system and the early results with it on the 100 m diameter telescope at Effelsberg are presented in the paper.
- 1 September 2017
- Published by Cambridge University Press (CUP) in Proceedings of the International Astronomical Union
- Vol. 13 (S337) , 330-331
Early results of a Phased Array Feed system at Effelsberg
The overview of a Phased Array Feed (PAF) system and the early results with it on the 100 m diameter telescope at Effelsberg are presented in the paper.
- 1 September 2017
- Published by Cambridge University Press (CUP) in Proceedings of the International Astronomical Union
- Vol. 13 (S337) , 370-371
PAFINDER – Searching for FRBs and pulsars using Phased Array Feeds
The challenges of detecting and localising Fast Radio Bursts in real time can be met with the use of Phased Array Feeds. One such system, capable of creating up to 36 simultaneous beams, is currently being commissioned at the Effelsberg radio telescope in Germany following testing at the 64 m Parkes radio telescope. The PAFINDER (Phased Array Feed FRB Finder) pipeline will be used with this receiver to enable real–time single–pulse detection and localisation.
- 1 September 2017
- Published by Cambridge University Press (CUP) in Proceedings of the International Astronomical Union
- Vol. 13 (S337) , 370-371
PAFINDER – Searching for FRBs and pulsars using Phased Array Feeds
The challenges of detecting and localising Fast Radio Bursts in real time can be met with the use of Phased Array Feeds. One such system, capable of creating up to 36 simultaneous beams, is currently being commissioned at the Effelsberg radio telescope in Germany following testing at the 64 m Parkes radio telescope. The PAFINDER (Phased Array Feed FRB Finder) pipeline will be used with this receiver to enable real–time single–pulse detection and localisation.
- 5 July 2017
- Published by Cambridge University Press (CUP) in Publications of the Astronomical Society of Australia
- Vol. 34
Observing Pulsars with a Phased Array Feed at the Parkes Telescope
During 2016 February, CSIRO Astronomy and Space Science and the Max-Planck-Institute for Radio Astronomy installed, commissioned, and carried out science observations with a phased array feed receiver system on the 64-m diameter Parkes radio telescope. Here, we demonstrate that the phased array feed can be used for pulsar observations and we highlight some unique capabilities. We demonstrate that the pulse profiles obtained using the phased array feed can be calibrated and that multiple pulsars can be simultaneously observed. Significantly, we find that an intrinsic polarisation leakage of −31 dB can be achieved with a phased array feed beam offset from the centre of the field of view. We discuss the possibilities for using a phased array feed for future pulsar observations and for searching for fast radio bursts with the Parkes and Effelsberg telescopes.
- 5 July 2017
- Published by Cambridge University Press (CUP) in Publications of the Astronomical Society of Australia
- Vol. 34
Observing Pulsars with a Phased Array Feed at the Parkes Telescope
During 2016 February, CSIRO Astronomy and Space Science and the Max-Planck-Institute for Radio Astronomy installed, commissioned, and carried out science observations with a phased array feed receiver system on the 64-m diameter Parkes radio telescope. Here, we demonstrate that the phased array feed can be used for pulsar observations and we highlight some unique capabilities. We demonstrate that the pulse profiles obtained using the phased array feed can be calibrated and that multiple pulsars can be simultaneously observed. Significantly, we find that an intrinsic polarisation leakage of −31 dB can be achieved with a phased array feed beam offset from the centre of the field of view. We discuss the possibilities for using a phased array feed for future pulsar observations and for searching for fast radio bursts with the Parkes and Effelsberg telescopes.