PRPaloma Maria Silva Rocha Rizol

Paloma Maria Silva Rocha Rizol

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Paloma Maria Silva Rocha Rizol has a total of 41 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Forecasting Residential Electricity Consumption in Southeastern Brazil Using Type-2 Interval Fuzzy Inference Systems

    by Lucas Furtado Rodrigues, Paloma Maria Silva Rocha Rizol

    Electricity consumption in the residential sector has increased over the last few decades [1]. With the introduction of new technologies, different types of loads have been used and consumer behaviour has changed. Therefore, it is extremely important to improve electricity consumption models for residential units to incorporate changes in consumer habits and uncertainties [2]. This article proposes the use of an Interval Type-2 Fuzzy Inference System (IT2FIS) to estimate the electricity consumption of residential units, taking into account aspects of consumer behaviour, climatic conditions and socio-economic aspects. The database used to evaluate the models contains 2073 hourly consumption samples, obtained from the 2019 Survey of Ownership and Usage Habits of Electrical Equipment in the Residential Class, carried out by the Programa Nacional de Conservação de Energia Elétrica - Procel [41]. The models were implemented using the Pyhton programming language. The results were evaluated using Mean Absolute Error (MAE), Mean Absolute Percentage Error (MAPE), Mean Square Error (MSE) and Root Mean Square Error (RMSE). The results obtained were satisfactory and demonstrate that IT2FIS models can correlate human behavioural aspects, social and economic factors, and climatic conditions in order to estimate hourly electricity consumption in the residential sector.

  • Interval Type-2 Fuzzy Control Simulation of an Electromagnetic Force Compensation Load Cell Using Matlab

    by Ezequias Costa Rocha, Paloma Maria Silva Rocha Rizol, Raphaela Carvalho Machado, Samuel Euzédice de Lucena

    This study presents the Matlab simulation of PID, type-1 and interval type-2 fuzzy logic controllers (FLC) applied to an Electromagnetic Force Compensation (EMFC) load cell, implemented in the Matlab/Simulink environment. A massspring-damper mechanical model is employed to represent system dynamics. The performance of the fuzzy controllers is compared to that of a conventional PID controller. Stability characteristics and frequency response are also investigated. FLCs yield superior performance in EMFC load cell applications when compared to classical PID control.


  • Open Access

    Performance Analysis and Computational Interface for X – R Intuitionistic Fuzzy Control Chart

    by Amanda Dos Santos Mendes, Túlio S. Almeida, Marcela A. G. Machado, Paloma Maria Silva Rocha Rizol

    Quality control, particularly through the use of control charts, has become essential in industry to ensure that processes free from special causes of variability. Many processes are subject to instrument uncertainty, human subjectivity, and operator hesitation at the time of measurement. In such cases, traditional control charts may not be as viable, so intuitionistic fuzzy control charts should be used, as they are able to represent the uncertainty and hesitation of the process. This study evaluates the performance of the X-R intuitionistic fuzzy control charts was measured by the Average Run Length (ARL), Standard Deviation Run Length (SDRL) and Run Length Percentiles. Additionally, computational interface was developed in the R programming language, using the Shiny package, capable of facilitating the user’s experience in combining the concepts presented. Different combinations of the CL and CR coefficients in the IF-WABL (Intuitionistic Fuzzy -Weigthed Average Based on Level) defuzzification method were considered, resulting in 17 scenarios. As these coefficients can be adjusted by the user, it is recommended that scenarios 4 to 7 be used for the general performance of the intuitionistic fuzzy X-R control chart, as they lead to reductions in ARL and SDRL values and percentiles close to those of the traditional control chart. A maximum reduction of 5.88% in ARL and 5.45% in SDRL was observed, both in scenario 4. This work showed that intuitionistic fuzzy control charts are efficient at detecting special causes, and that the computer interface developed is capable of performing the proposed functions.


  • Open Access

    Gender Disparity in Engineering Courses in Brazil

    by Bruna Camila Francisco de Castro, Thamyres Machado David, Adriana Maria Tonini, Paloma Maria Silva Rocha Rizol

    As society advances globally, the pursuit of gender equity transcends geographical borders and maintains its historical significance. This paper examines the persistent underrepresentation of women in STEM fields, with a focus on engineering, both nationally and globally. Using data from the Enade in Brazil from 2004 to 2019, it explores the reasons behind this disparity and the influence of differences in interests between men and women in STEM careers. The study highlights the ongoing male predominance in engineering courses, despite a gradual increase in female participation. It observes gender variations in engineering disciplines and across regions in Brazil, emphasizing the need to enhance female representation. The paper underscores the importance of recognizing gender expectations, stereotypes, and socioeconomic inequalities while promoting the inclusion of all gender identities to create equitable environments. It proposes strategies to promote gender equality in STEM, including safe environments, combatting sexism, female leadership, and adjustments to educational policies.


  • Open Access

    Association between Premature Birth and Air Pollutants Using Fuzzy and Adaptive Neuro-Fuzzy Inference System (ANFIS) Techniques

    by Taynara de Oliveira Castellões, Paloma Maria Silva Rocha Rizol, Luiz Fernando Costa Nascimento

    This article uses machine learning techniques as fuzzy and neuro-fuzzy ANFISs, to develop and compare prediction models capable of relating pregnant women’s exposure to air pollutants, such as Nitrogen Dioxide and Particulate Matter, the mother’s age, and the number of prenatal consultations to the incidence of premature birth. In the current literature, studies can be found that relate prematurity to the exposure of pregnant women to NO2, O3, and PM10; to Toluene and benzene, mainly in the window 5 to 10 days before birth; and to PM10 in the week before birth. Both models used logistic regression to quantify the effects of pollutants as a result of premature birth. Datasets from Brazil—Departamento de Informatica do Sistema Único de Saúde (DATASUS) and Companhia Ambiental do Estado de São Paulo (CETESB)—were used, covering the period from 2016 to 2018 and comprising women living in the city of São José dos Campos (SP), Brazil. In order to evaluate and compare the different techniques used, evaluation metrics were calculated, such as correlation (r), coefficient of determination (R2), Root Mean Square Error (RMSE), Mean Absolute Percentage Error (MAPE), Mean Square Error (MSE), and Mean Absolute Error (MAE). These metrics are widely used in the literature due to their ability to evaluate the robustness and efficiency of prediction models. For the RMSE, MAPE, MSE, and MAE metrics, lower values indicate that prediction errors are smaller, demonstrating better model accuracy and confidence. In the case of (r) and R2, a positive and strong result indicates alignment and better performance between the real and predicted data. The neuro-fuzzy ANFIS model showed superior performance, with a correlation (r) of 0.59, R2 = 0.35, RMSE = 2.83, MAPE = 5.35%, MSE = 8.00, and MAE = 1.70, while the fuzzy model returned results of r = 0.20, R2 = 0.04, RMSE = 3.29, MSE = 10.81, MAPE = 6.67%, and MAE = 2.01. Therefore, the results from the ANFIS neuro-fuzzy system indicate greater prediction capacity and precision in relation to the fuzzy system. This superiority can be explained by integration with neural networks, allowing data learning and, consequently, more efficient modeling. In addition, the findings obtained in this study have potential for the formulation of public health policies aimed at reducing the number of premature births and promoting improvements in maternal and neonatal health.


  • Open Access

    Modelagem de um sistema massa-mola usando método de subespaços

    by Raphaela C. Machado, Paloma M. S. R. Rizol, Teófilo M. Souza, David F. C. Zúñiga, Airton Nabarrete, José M. Balthazar

    Este artigo apresenta a identificação em malha aberta de um sistema massa-mola usando método de subespaços. A aplicação de métodos SIM (Subspace Identification Methods) para identificação de sistemas dinâmicos no domínio do tempo tem demonstrado ser uma alternativa viável para obtenção de modelos que não necessitam de uma parametrização explícita, a qual, para sistemas multivariáveis, pode ser uma tarefa complexa. Nesse sentido, os resultados obtidos neste trabalho são provenientes de dados experimentais de um sistema massa-mola e os resultados demonstram que o modelo identificado captura bem a dinâmica do sistema.

  • Open Access

    Performance Analysis of Interval Type-2 Fuzzy X¯ and R Control Charts

    by Túlio S. Almeida, Amanda dos Santos Mendes, Paloma M. S. Rocha Rizol, Marcela A. G. Machado

    Statistical process control (SPC) is one of the most powerful techniques for improving quality, as it is able to detect special causes of problems in processes, products and services with a remarkable degree of accuracy. Among SPC tools, X¯ and R control charts are widely employed in process monitoring. However, scenarios involving vague, imprecise and even subjective data require a type-2 fuzzy set approach. Thus, X¯ and R control charts should be coupled with interval type-2 triangular fuzzy numbers (IT2TFN) in order to add further information to traditional control charts. This paper proposes a performance analysis of IT2TFN and X¯ and R control charts by means of average run length (ARL), standard deviation of the run length (SDRL) and RL percentile. Computer simulations were carried out considering 10,000 runs to obtain ARL, SDRL and the 5th, 25th, 50th, 75th and 95th RL percentiles. Simulation results reveal that the proposed control charts increased fault detection capability (speed of response) and slightly reduced the number of false alarms in processes under control. Moreover, it was observed that, in addition to superior performance, IT2TFN X¯-R control charts proved to be more robust and flexible when compared to traditional control charts.


  • Open Access

    A Fuzzy Inference System for Detection of Positive Displacement Motor (PDM) Stalls during Coiled Tubing Operations

    by Rafael Augusto Galo Fernandes, Paloma Maria Silva Rocha Rizol, Andreas Nascimento, José Alexandre Matelli

    Positive Displacement Motors (PDM) are extensively used in the oilfield, either in drilling or in coiled tubing (CT) operations. They provide a higher rate of penetration and the possibility of drilling horizontal wells. For coiled tubing operations, PDMs can mill through obstructions and enable shut-in wells to work again. One of the major challenges while using these tools is the motor stalling, which can lead to serious damage to the PDM and lost time events in drilling and workover rigs. These events result in total losses of hundreds of thousands of dollars, and their avoidance mostly depends on trained and fully aware equipment operators. If a PDM starts to stall, the pumping needs to be halted immediately or the tool may fail. This paper describes the use of a Fuzzy Inference System (FIS) to detect the stalling events as they start to happen using the acquisition data from the coiled tubing unit, the output of the FIS could then trigger an alarm for the operator to take the proper action or remotely stop the pump. The FIS was implemented in Python and tested with real CT milling acquisition data. When tested using real data, the system analyzed 68,458 acquisition points and detected 94% of the stalling events across this data during its first seconds, whereas, during the real job, a CT operator could take longer to notice this event and take the proper action, or even take no action. If the FIS was applied on a real coiled tubing acquisition system, it could reduce PDMs over-pressurization due to stalling, leading to an increase on its useful life and decrease on premature failure. As of now there is no similar system in the market or published and this kind of operation is fully performed using human supervision only.


  • Comparison of adaptive neuro-fuzzy inference system (ANFIS) and machine learning algorithms for electricity production forecasting

    by Alexander Alberto Rodríguez Gamboa, Elias Carlos Aguirre Rodríguez, Aneirson Francisco da Silva, Paloma Maria Silva Rocha Rizol, Fernando Augusto Silva Marins

    Combined cycle power plants (CCPP) are popular in the energy sector for the production of electricity, and are the union of two thermodynamic cycles, corresponding to the steam turbine and the gas turbine. This paper presents the application of several machine learning (ML) techniques and the adaptive neuro-fuzzy inference system (ANFIS) to predict the hourly electricity production in a CCPP. The models were developed using 5-fold cross-validation with the collected features of temperature, exhaust pressure, relative humidity, ambient pressure, and electricity production per hour (the target feature). The hyperparameters of the tested models were optimized. The correlation and determination coefficients of the models were higher than 92%, showing a significant performance. The ANFIS (r = 98% e R2 = 95%) model shows the lowest values in the evaluated error metrics, compared to the other ML models. Finally, the results showed the effectiveness of ANFIS in predicting the hourly production of electricity in CCPP.