Mohammad Zakertabrizi
Research Subjects
Mohammad Zakertabrizi has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
- Asghar Habibnejad Korayem
Nanomaterials Research Centre, School of Civil Engineering, Iran University of Science and Technology, Tehran 13114-16846, Iran
7 shared publications Ehsan Hosseini
7 shared publicationsAsghar Habibnejad Korayem
3 shared publications- Amir Razmjou
School of Engineering Edith Cowan University Joondalup Western Australia Australia
2 shared publications - Ehsan Hosseini
J. Mike Walker ‘66 Department of Mechanical Engineering
2 shared publications - Rouzbeh Shahsavari
Department of Civil and Environmental Engineering, Rice University, Houston, Texas 77005, United States
2 shared publications
Latest Publications
- Open Access
- 9 July 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (28) , 20176-20187
A Buffered Hexacyanoferrate Electrolyte for Thermogalvanic Heat Harvesting across Symmetric and Asymmetric Electrode Configurations
Thermogalvanic waste-heat harvesting offers a promising route to the productive utilization of low-grade thermal energy, but current cells remain limited by low thermopower and power output. Here, we report a thermogalvanic electrolyte that inserts the canonical Fe(CN)63-/4- redox cycle within an optimized NH4OH-CH3COOH alkaline environment. Our results show that the optimal mixture establishes differential formation energies between the hexacyanoferrate redox pair, thereby amplifying the configurational entropy difference between redox states and boosting the thermopower from 1.48 to 2.64 mV K-1 in a symmetric graphite cell, with a normalized power density of ∼1.5 mW m-2 K-2 sustained across ΔT = 10-50 K. We show that placing the optimized electrolyte within an asymmetric copper-graphite electrode setup leads to a hybrid mechanism of galvanic-thermogalvanic (gTg), which produces a total output substantially exceeding the sum of isothermal galvanic and electrode-analogous thermogalvanic cell outputs, while also demonstrating significantly extended operational longevity over isothermal discharge. A 50-cell proof-of-concept device mounted on a PC tower produces 42 V and 160 mW total output, of which 7 V and 37.6 mW are derived from the thermal contribution.
- 9 July 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (28) , 20176-20187
Open AccessA Buffered Hexacyanoferrate Electrolyte for Thermogalvanic Heat Harvesting across Symmetric and Asymmetric Electrode Configurations
Thermogalvanic waste-heat harvesting offers a promising route to the productive utilization of low-grade thermal energy, but current cells remain limited by low thermopower and power output. Here, we report a thermogalvanic electrolyte that inserts the canonical Fe(CN)63-/4- redox cycle within an optimized NH4OH-CH3COOH alkaline environment. Our results show that the optimal mixture establishes differential formation energies between the hexacyanoferrate redox pair, thereby amplifying the configurational entropy difference between redox states and boosting the thermopower from 1.48 to 2.64 mV K-1 in a symmetric graphite cell, with a normalized power density of ∼1.5 mW m-2 K-2 sustained across ΔT = 10-50 K. We show that placing the optimized electrolyte within an asymmetric copper-graphite electrode setup leads to a hybrid mechanism of galvanic-thermogalvanic (gTg), which produces a total output substantially exceeding the sum of isothermal galvanic and electrode-analogous thermogalvanic cell outputs, while also demonstrating significantly extended operational longevity over isothermal discharge. A 50-cell proof-of-concept device mounted on a PC tower produces 42 V and 160 mW total output, of which 7 V and 37.6 mW are derived from the thermal contribution.
- 29 June 2023
- Published by Wiley in Advanced Materials
- Vol. 35 (32) , e2300948
Multifunctionality through Embedding Patterned Nanostructures in High‐Performance Composites
Despite being a pillar of high‐performance materials in industry, manufacturing carbon fiber composites with simultaneously enhanced multifunctionality and structural properties has remained elusive due to the lack of practical bottom‐up approaches with control over nanoscale interactions. Guided by the droplet's internal currents and amphiphilicity of nanomaterials, herein, a programmable spray coating is introduced for the deposition of multiple nanomaterials with tailorable patterns in composite. It is shown that such patterns regulate the formation of interfaces, damage containment, and electrical‐thermal conductivity of the composites, which is absent in conventional manufacturing that primarily rely on incorporating nanomaterials to achieve specific functionalities. Molecular dynamics simulations show that increasing the hydrophilicity of the hybrid nanomaterials, which is synchronous with shifting patterns from disk to ring, improves the interactions between the carbon surfaces and epoxy at the interfaces,manifested in enhanced interlaminar and flexural performance. Transitioning from ring to disk creates a larger interconnected network leading to improved thermal and electrical properties without penalty in mechanical properties. This novel approach introduces a new design , where the mechanical and multifunctional performance is controlled by the shape of the deposited patterns, thus eliminating the trade‐off between properties that are considered paradoxical in today's manufacturing of hierarchical composites.
- 29 June 2023
- Published by Wiley in Advanced Materials
- Vol. 35 (32) , e2300948
Multifunctionality through Embedding Patterned Nanostructures in High‐Performance Composites
Despite being a pillar of high‐performance materials in industry, manufacturing carbon fiber composites with simultaneously enhanced multifunctionality and structural properties has remained elusive due to the lack of practical bottom‐up approaches with control over nanoscale interactions. Guided by the droplet's internal currents and amphiphilicity of nanomaterials, herein, a programmable spray coating is introduced for the deposition of multiple nanomaterials with tailorable patterns in composite. It is shown that such patterns regulate the formation of interfaces, damage containment, and electrical‐thermal conductivity of the composites, which is absent in conventional manufacturing that primarily rely on incorporating nanomaterials to achieve specific functionalities. Molecular dynamics simulations show that increasing the hydrophilicity of the hybrid nanomaterials, which is synchronous with shifting patterns from disk to ring, improves the interactions between the carbon surfaces and epoxy at the interfaces,manifested in enhanced interlaminar and flexural performance. Transitioning from ring to disk creates a larger interconnected network leading to improved thermal and electrical properties without penalty in mechanical properties. This novel approach introduces a new design , where the mechanical and multifunctional performance is controlled by the shape of the deposited patterns, thus eliminating the trade‐off between properties that are considered paradoxical in today's manufacturing of hierarchical composites.
- 1 November 2021
- Published by Elsevier in Resources, Conservation and Recycling
- Vol. 174
Turning two waste streams into one solution for enhancing sustainability of the built environment
- 1 November 2021
- Published by Elsevier in Resources, Conservation and Recycling
- Vol. 174
Turning two waste streams into one solution for enhancing sustainability of the built environment
- 28 January 2021
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 23 (10) , 5999-6008
Mechanical hydrolysis imparts self-destruction of water molecules under steric confinement
Decoding behavioral aspects associated with the water molecules in confined spaces such as an interlayer space of two-dimensional nanosheets is key for the fundamental understanding of water–matter interactions and identifying unexpected phenomena of water molecules in chemistry and physics. Although numerous studies have been conducted on the behavior of water molecules in confined spaces, their reach stops at the properties of the planar ice-like formation, where van der Waals interactions are the predominant interactions and many questions on the confined space such as the possibility of electron exchange and excitation state remain unsettled. We used density functional theory and reactive molecular dynamics to reveal orbital overlap and induction bonding between water molecules and graphene sheets under much less pressure than graphene fractures. Our study demonstrates high amounts of charge being transferred between water and the graphene sheets, as the interlayer space becomes smaller. As a result, the inner face of the graphene nanosheets is functionalized with hydroxyl and epoxy functional groups while released hydrogen in the form of protons either stays still or traverses a short distance inside the confined space via the Grotthuss mechanism. We found signatures of a new hydrolysis mechanism in the water molecules, i.e. mechanical hydrolysis, presumably responsible for relieving water from extremely confined conditions. This phenomenon where water reacts under extreme confinement by disintegration rather than forming ice-like structures is observed for the first time, illustrating the prospect of treating ultrafine porous nanostructures as a driver for water splitting and material functionalization, potentially impacting the modern design of nanofilters, nanochannels, nano-capacitators, sensors, and so on.
- 28 January 2021
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 23 (10) , 5999-6008
Mechanical hydrolysis imparts self-destruction of water molecules under steric confinement
Decoding behavioral aspects associated with the water molecules in confined spaces such as an interlayer space of two-dimensional nanosheets is key for the fundamental understanding of water–matter interactions and identifying unexpected phenomena of water molecules in chemistry and physics. Although numerous studies have been conducted on the behavior of water molecules in confined spaces, their reach stops at the properties of the planar ice-like formation, where van der Waals interactions are the predominant interactions and many questions on the confined space such as the possibility of electron exchange and excitation state remain unsettled. We used density functional theory and reactive molecular dynamics to reveal orbital overlap and induction bonding between water molecules and graphene sheets under much less pressure than graphene fractures. Our study demonstrates high amounts of charge being transferred between water and the graphene sheets, as the interlayer space becomes smaller. As a result, the inner face of the graphene nanosheets is functionalized with hydroxyl and epoxy functional groups while released hydrogen in the form of protons either stays still or traverses a short distance inside the confined space via the Grotthuss mechanism. We found signatures of a new hydrolysis mechanism in the water molecules, i.e. mechanical hydrolysis, presumably responsible for relieving water from extremely confined conditions. This phenomenon where water reacts under extreme confinement by disintegration rather than forming ice-like structures is observed for the first time, illustrating the prospect of treating ultrafine porous nanostructures as a driver for water splitting and material functionalization, potentially impacting the modern design of nanofilters, nanochannels, nano-capacitators, sensors, and so on.
- 1 November 2019
- Published by Elsevier in Construction and Building Materials
- Vol. 224, 266-275
Graphene oxide in ceramic-based layered structure: Nanosheet optimization
- 1 November 2019
- Published by Elsevier in Construction and Building Materials
- Vol. 224, 266-275
Graphene oxide in ceramic-based layered structure: Nanosheet optimization
- 1 May 2019
- Published by Elsevier in Cement and Concrete Composites
- Vol. 99, 112-119
A novel method to enhance the interlayer bonding of 3D printing concrete: An experimental and computational investigation
- 1 May 2019
- Published by Elsevier in Cement and Concrete Composites
- Vol. 99, 112-119
A novel method to enhance the interlayer bonding of 3D printing concrete: An experimental and computational investigation
- 5 February 2019
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 11 (8) , 8635-8644
Tunable, Multifunctional Ceramic Composites via Intercalation of Fused Graphene Boron Nitride Nanosheets
Ternary 2D materials such as fused graphene-boron nitride (GBN) nanosheets exhibit attractive physics and tunable properties far beyond their parent structures. While these features impart several multifunctional properties in various matrices, a fundamental understanding on the nature of the interfacial interactions of these ternary 2D materials with host matrices and the role of their individual components has been elusive. Herein, we focus on intercalated GBN/ceramic nanocomposites as a model system and perform a series of density functional theory calculations to fill this knowledge gap. Propelled by more polarity and negative Gibbs free energy, our results demonstrate that GBN is more water-soluble than graphene and hexagonal boron nitride (h-BN), making it a preferred choice for slurry preparation and resultant intercalations. Further, a chief attribute of the intercalated GBN/ceramic is formation of covalent C-O and B-O bonds between the two structures, changing the hybridization of GBN from sp2 to sp3. This change, combined with the electron release in the vicinity of the interfacial regions, lead to several non-intuitive mechanical and electrical alterations of the nanocomposite such as exhibiting higher young’s modulus, strength and ductility as well as sharp decline in the band gap. As a limiting case, though both tobermorite ceramic and h-BN are wide bandgap materials, their intercalated nanocomposite becomes a p-type semiconductor, contrary to intuition. These multifunctional features, along with our fundamental electronic descriptions of the origin of property change, provide key guidelines for synthesizing next generation of multifunctional bi-layer ceramics with remarkable properties on demand.
- 5 February 2019
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 11 (8) , 8635-8644
Tunable, Multifunctional Ceramic Composites via Intercalation of Fused Graphene Boron Nitride Nanosheets
Ternary 2D materials such as fused graphene-boron nitride (GBN) nanosheets exhibit attractive physics and tunable properties far beyond their parent structures. While these features impart several multifunctional properties in various matrices, a fundamental understanding on the nature of the interfacial interactions of these ternary 2D materials with host matrices and the role of their individual components has been elusive. Herein, we focus on intercalated GBN/ceramic nanocomposites as a model system and perform a series of density functional theory calculations to fill this knowledge gap. Propelled by more polarity and negative Gibbs free energy, our results demonstrate that GBN is more water-soluble than graphene and hexagonal boron nitride (h-BN), making it a preferred choice for slurry preparation and resultant intercalations. Further, a chief attribute of the intercalated GBN/ceramic is formation of covalent C-O and B-O bonds between the two structures, changing the hybridization of GBN from sp2 to sp3. This change, combined with the electron release in the vicinity of the interfacial regions, lead to several non-intuitive mechanical and electrical alterations of the nanocomposite such as exhibiting higher young’s modulus, strength and ductility as well as sharp decline in the band gap. As a limiting case, though both tobermorite ceramic and h-BN are wide bandgap materials, their intercalated nanocomposite becomes a p-type semiconductor, contrary to intuition. These multifunctional features, along with our fundamental electronic descriptions of the origin of property change, provide key guidelines for synthesizing next generation of multifunctional bi-layer ceramics with remarkable properties on demand.
- 1 October 2018
- Published by Elsevier in Construction and Building Materials
- Vol. 186, 1105-1113
A review of the impact of micro- and nanoparticles on freeze-thaw durability of hardened concrete: Mechanism perspective
- 1 October 2018
- Published by Elsevier in Construction and Building Materials
- Vol. 186, 1105-1113
A review of the impact of micro- and nanoparticles on freeze-thaw durability of hardened concrete: Mechanism perspective