Mayra Anabel Lara-Angulo

Electrochemical CO₂ reduction (CO₂RR) is a promising route to transform a major greenhouse gas into value-added fuels and chemicals. However, its deployment is still hindered by the sluggish activation of CO₂, poor selectivity toward multielectron products, and competition with the hydrogen evolution reaction (HER). Single-atom catalysts (SACs) have emerged as powerful materials to address these challenges because they combine maximal metal utilization with well-defined coordination environments whose electronic structure can be precisely tuned through metal–support interactions. This minireview summarizes current understanding of how structural, electronic, and chemical features of SAC supports (e.g., porosity, heteroatom doping, vacancies, and surface functionalization) govern the adsorption and conversion of key CO₂RR intermediates and thus control product distributions from CO to CH₄, CH₃OH and C₂⁺ species. Particular emphasis is placed on selectivity descriptors (e.g., coordination number, d-band position, binding energies of *COOH and *OCHO) and on rational design strategies that exploit curvature, microenvironment engineering, and electronic metal–support interactions to direct the reaction along desired pathways. Representative SAC systems based primarily on N-doped carbons, complemented by selected examples on oxides and MXenes are discussed in terms of Faradaic efficiency (FE), current density and operational stability under practically relevant conditions. Finally, the review highlights remaining bottlenecks and outlines future directions, including operando spectroscopy and data-driven analysis of dynamic single-site ensembles, machine-learning-assisted DFT screening, scalable mechanochemical synthesis, and integration of SACs into industrially viable electrolyzers for carbon-neutral chemical production.

Easily prepared Ru/CeO ₂ and Ru/CeO ₂ –Al ₂ O ₃ catalysts showed outstanding behavior in the low-temperature ammonia synthesis reaction.

The growing interest in green ammonia production has spurred the development of new catalysts with the potential to carry out the Haber–Bosch process under mild pressure and temperature conditions. While there is a wide experimental background on new catalysts involving transition metals, supports and additives, the fundamentals behind ammonia synthesis performance on these catalysts remained partially unsolved. Here, we review the most important works developed to date and analyze the traditional catalysts for ammonia synthesis, as well as the influence of the electron transfer properties of the so-called 3rd-generation catalysts. Finally, the importance of metal–support interactions is highlighted as an effective pathway for the design of new materials with potential to carry out ammonia synthesis at low temperatures and pressures.

The formose reaction is an autocatalytic series of aldol condensations that allows one to obtain monosaccharides from formaldehyde. The formose reaction suffers from a lack of selectivity, which hinders practical applications at the industrial level. Over the years, many attempts have been made to overcome this selectivity issue, with modest results. Heterogeneous porous catalysts with acid–base properties, such as Metal–Organic Frameworks (MOFs), can offer advantages compared to homogeneous strong bases (e.g., calcium hydroxide) for increasing the selectivity of this important reaction. For the very first time, four different Zeolite Imidazolate Frameworks are presented in this work as catalysts for the formose reaction in liquid phase, and their catalytic performances were compared with those of the typical homogeneous catalyst (i.e., calcium hydroxide). The heterogeneous nature of the catalysis, the possible contribution of leached metal or linkers to the solution, and the stability of the materials were investigated. The porous structure of these solids and their mild basicity make them suitable for obtaining enhanced selectivity at 30% formaldehyde conversion. Most of the MOFs tested showed low structural stability under reaction conditions, thereby indicating the need to search for new MOF families with higher robustness. However, this important result opens the path for future research on porous heterogeneous basic catalysts for the formose reaction.

In this study, a simple and scalable method to obtain heterogeneous indium nanoparticles and carbon-supported indium nanoparticles under mild conditions is described. Physicochemical characterization by X-ray diffraction (XRD), X-ray photoelectron microscopy (XPS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) revealed heterogeneous morphologies for the In nanoparticles in all cases. Apart from In⁰, XPS revealed the presence of oxidized In species on the carbon-supported samples, whereas these species were not observed for the unsupported samples. The best-in-class catalyst (In₅₀/C₅₀) exhibited a high formate Faradaic efficiency (FE) near the unit (above 97%) at −1.6 V vs. Ag/AgCl, achieving a stable current density around −10 mA·cm_geo⁻², in a common H-cell. While In⁰ sites are the main active sites for the reaction, the presence of oxidized In species could play a role in the improved performance of the supported samples.

As other studies have demonstrated, improving the effectiveness of TiO2 for environmental remediation requires that the properties of this oxide be modified using different synthesis methods. In the current study, labprepared TiO2 was synthesized using the hydrothermal method and two different Ti precursors (titanium butoxide and titanium isopropoxide). After the synthesis, the obtained titania was also modified using photodeposition by platinum nanoparticles. This study aims to evaluate the effectiveness of the photocatalytic materials prepared in photodegrading methyl orange. The Ti precursors used in the TiO2 synthesis had a slight effect on the physicochemical properties of the oxide obtained. When titanium butoxide was used as a precursor, we observed a change in the bandgap value and some material with the largest surface area. Additionally, the addition of Pt increased the absorption of TiO2 in the visible region of the electromagnetic spectrum and slightly decreased the bandgap value of this oxide. The photocatalyst prepared using titanium isopropoxide as a precursor showed the most remarkable effectiveness in the degradation rate of methyl orange. This is the result of the lower band gap value of this material which leads to easier transport of the photogenerated charges during the photocatalytic reaction. We also observed that the addition of Pt has a detrimental effect on the effectiveness of TiO2 in dye degradation, which may be due to possible obstruction of the dye-photocatalyst interaction on the TiO2 surface because of the Pt nanoparticles observed by tem. The effectiveness of commercial TiO2 in methyl orange degradation is slightly higher than that observed in other evaluated solids.

In this study, the treatment of wastewater coming from a river highly polluted with domestic and industrial effluents was evaluated. For this purpose, series of photocatalysts obtained by ZnO and TiO₂ modification were evaluated. The effect of metal addition and Ti precursor (in the case of the titania series) over the physicochemical and photocatalytic properties of the materials obtained was also analyzed. The evaluation of the photocatalytic activity showed that semiconductor modification and precursor used in the materials synthesis are important factors influencing the physicochemical and therefore the photocatalytic properties of the materials obtained. The water samples analyzed in the present work were taken from a highly polluted river, and it was found that the effectiveness of the photocatalytic treatment increases when the reaction time increases and for both, wastewater samples and isolated Escherichia coli strain follow the next order Pt/TiO₂ << ZnO. It was also observed that biochemical and chemical demand oxygen and turbidity significantly decrease after treatment, thus indicating that photocatalysis is a non-selective technology, which can lead to recover wastewater containing different pollutants.