TJTaejin Jang

Taejin Jang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Taejin Jang has a total of 38 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Sparse Differential Algebraic Equation (DAE) and Stiff Ordinary Differential Equation (ODE) Solver in Maple

    by Taejin Jang, Maitri Uppaluri, Kyeongjun Seo, Venkatasailanathan Ramadesigan, Venkat Subramanian

    This paper implements efficient numerical methods in Maple to solve index-1 nonlinear Differential Algebraic Equations (DAEs) and stiff Ordinary Differential Equations (ODEs) systems. Single-step methods (like Trapezoid (TR), Implicit-mid point (IMP), Euler-backward (EB), Radau IIA (Rad) methods, TRBDF2, TRX2) and backward-difference formula of order 2 are implemented with adaptive time-stepping methods in Maple to solve index-1 nonlinear DAEs. Maple’s robust and efficient ability to search within a list/set is exploited to identify the sparsity pattern and automatically calculate the analytic Jacobian. The algorithm and implementation are robust and efficient for index-1 DAE problems and scale well for finite difference/finite element discretization of two-dimensional models with system size up to 10,000 nonlinear DAEs and solve the same in a few seconds. The computational efficiency of the proposed algorithm (provided as an open-access code) compares favorably with the commercial solver gPROMs, one of the most commonly used sparse DAE solvers in the industry.


  • Addressing Mass Conservation in Two-dimensional Modeling of Lithium Metal Batteries with Electrochemically Plated/Stripped Interfaces

    by Taejin Jang, Lubhani Mishra, Akshay Subramaniam, Maitri Uppaluri, Venkatasailanathan Ramadesigan, Taylor R. Garrick, Venkat R. Subramanian

    This work investigates convection in liquid electrolytes induced by the movement of the lithium metal surface, modeled as a moving boundary. The back-and-forth motion of the lithium metal surface during the plating and stripping of lithium introduces a weak fluid motion in the liquid electrolyte that should be incorporated in the model equations and corresponding boundary conditions. The results for the electrochemical signatures and morphology evolution thus obtained by solving a coupled fluid model are compared with the case where the velocity distribution in the liquid electrolyte is ignored. This work extends our previously reported perspective on the convective flux correction at moving boundaries in one-dimensional models to two dimensions. This careful implementation of the correct boundary conditions ensures the mass conservation of lithium in two-dimensional simulations for predicting the morphological evolution of lithium metal electrodes over cycles. Additionally, these relative fluxes at the moving and fixed boundaries are sometimes ignored by assuming a bulk concentration condition at the far end, especially at the cathode/separator interface. While it may not affect overpotential signatures at the anode, it leads to mass conservation issues with implications for the accuracy of cycling simulations.


  • Electrochemical Model for a Three-Electrode Lead Acid Cell: Boundary Conditions for Asymmetric Configurations

    by Akshay Subramaniam, Suryanarayana Kolluri, Taejin Jang, Rayan Charab, Daniel Jimenez, Francisco Trinidad, Diptarka Majumdar, Venkat R. Subramanian

    A one-dimensional (1D) electrochemical model is developed for a lead-acid demonstration cell comprising two positive electrodes engaging a single negative electrode. Classical 1D models, which analyze a single repeat unit in a full battery, are extended to this non-standard configuration by considering additional porous electrode and electrolyte reservoir domains. The non-standard model necessitates appropriate boundary conditions to couple electrochemical variables in different domains, since symmetry boundary conditions typically employed at the current collector grids are no longer applicable. The modified model, with new boundary conditions, is simulated using standard techniques. Salient modeling and simulation differences compared to a standard lead-acid model are discussed, as are trends in predicted variables. The non-standard model predicts reduced polarization and more uniform utilization of the non-limiting electrodes, in addition to non-zero reaction currents and active material utilization in the terminal electrode faces, which are typically ignored in “unit-cell” analyses. This model is expected to be of substantial utility in guiding evaluations of new lead-acid battery designs through improved prediction of performance of such test configurations. The boundary conditions introduced herein are also useful for 1D modeling of non-standard configurations characterized by multiple, electrochemically interacting porous domains, particularly where spatial current distributions are initially unknown.


  • BattPhase—A Convergent, Non-Oscillatory, Efficient Algorithm and Code for Predicting Shape Changes in Lithium Metal Batteries Using Phase-Field Models: Part I. Secondary Current Distribution

    by Taejin Jang, Lubhani Mishra, Scott A. Roberts, Brady Planden, Akshay Subramaniam, Maitri Uppaluri, David Linder, Mogadalai P. Gururajan, Ji-Guang Zhang, Venkat R. Subramanian

    Electrochemical models at different scales and varying levels of complexity have been used in the literature to study the evolution of the anode surface in lithium metal batteries. This includes continuum, mesoscale (phase-field approaches), and multiscale models. Thermodynamics-based equations have been used to study phase changes in lithium batteries using phase-field approaches. However, grid convergence studies and the effect of additional parameters needed to simulate these models are not well-documented in the literature. In this paper, using a motivating example of a moving boundary model in one- and two-dimensions, we show how one can formulate phase-field models, implement algorithms for the same and analyze the results. An open-access code with no restrictions is provided as well. The article concludes with some thoughts on the computational efficiency of phase-field models for simulating dendritic growth.


  • Open Access

    BattPhase – A convergent, non-oscillatory, efficient algorithm and code for predicting shape changes in lithium metal batteries using phase-field models – 1. Secondary Current Distribution

    by Venkat R. Subramanian, Taejin Jang, Lubhani Mishra, Scott Alan Roberts, Akshay Subramaniam, Maitri Uppaluri, Mp Gururajan, Ji-Guang Zhang

    Electrochemical models at different scales and varying levels of complexity have been used in theliterature to study the evolution of the anode surface in lithium metal batteries. This includescontinuum, mesoscale (phase-field approaches), and multiscale models. Thermodynamics-basedequations have been used to study phase changes in lithium batteries using phase-field approaches.However, grid convergence studies and the effect of additional parameters needed to simulatethese models are not well-documented in the literature. In this paper, using a motivating exampleof a moving boundary model in one- and two-dimensions, we show how one can formulate phasefield models, implement algorithms for the same and analyze the results. An open-access codewith no restrictions is provided as well. The article concludes with some thoughts on thecomputational efficiency of phase-field models for simulating dendritic growth

  • Perspective—Mass Conservation in Models for Electrodeposition/Stripping in Lithium Metal Batteries

    by Lubhani Mishra, Akshay Subramaniam, Taejin Jang, Krishna Shah, Maitri Uppaluri, Scott A. Roberts, Venkat R. Subramanian

    Electrochemical models at different scales and varying levels of complexity have been used in the literature to study the evolution of the anode surface in lithium metal batteries. This includes continuum, mesoscale (phase-field approaches), and multiscale models. In this paper, using a motivating example of a moving boundary model in one dimension, we show how battery models need proper formulation for mass conservation, especially when simulated over multiple charge and discharge cycles. The article concludes with some thoughts on mass conservation and proper formulation for multiscale models.


  • Open Access

    Challenges in Moving to Multiscale Battery Models - Where Electrochemistry meets and demands more from Math

    by Krishna Shah, Akshay Subramaniam, Lubhani Mishra, Taejin Jang, Martin Z. Bazant, Richard D. Braatz, Venkat R. Subramanian

    There has been significant recent interest in studying multiscale characteristics of current and next-generation batteries, including lithium-metal and lithium-sulfur batteries. Multiple studies have conveyed the importance of microscale effects, pressure effects, and morphology changes. Advances in computing power make researchers believe that the detailed multiscale models can be efficiently simulated to arrive at the insights for the degradation and performance loss; however, this is not true and special attention needs to be paid to local singularities, boundary layers, moving boundaries, etc. This article presents motivating 2D examples suggesting the importance of grid convergence studies and discusses the challenges in simulating detailed models by providing well-defined models to test the efficiency of numerical schemes. This article also provides perspectives on important numerical aspects for robustness and efficiency, and provides recommendations on the possible best practices for studies involving multiscale modeling.

  • Open Access

    Editors’ Choice—Perspective—Challenges in Moving to Multiscale Battery Models: Where Electrochemistry Meets and Demands More from Math

    by Krishna Shah, Akshay Subramaniam, Lubhani Mishra, Taejin Jang, Martin Z. Bazant, Richard D. Braatz, Venkat R. Subramanian

    There has been significant recent interest in studying multiscale characteristics of current and next-generation batteries, including lithium-metal and lithium-sulfur batteries. Advances in computing power make researchers believe that the detailed multiscale models can be efficiently simulated to arrive at the insights for the degradation and performance loss; however, this is not true and special attention needs to be paid to local singularities, boundary layers, moving boundaries, etc. This article presents 2D examples that illustrate the importance of grid convergence studies, provides well-defined detailed models to test the efficiency of numerical schemes, and discusses the associated simulation challenges.


  • Power Hardware in the Loop (PHIL) Simulation of Battery Packs

    by Maitri Uppaluri, Chintan Pathak, Suryanarayana Kolluri, Taejin Jang, Eric J. Dufek, Venkat R. Subramanian, Daniel T Schwartz

    Testing battery pack configurations for their performance under different dynamic load profiles for grid and electric vehicle applications is expensive. Lowering the cost to understand the response of packs and their control strategies is critical. Power hardware in the loop (PHIL) simulation is widely used in power engineering for system and component testing. A simulator computes the model output in real-time, and then controls a power source to generate a dynamic power output with the expected current and voltage response of the emulated battery pack. This emulated battery pack power output can be coupled to a physical load to perform testing.1 Small time steps are useful to observe the transient response of the emulated battery when there is a sudden change in the load. PHIL simulations can also be useful to study the transient response of controllers and inverters present in the battery management system by connecting these devices to the simulator. PHIL simulations can be used to test the model’s accuracy2, to conduct repeatability experiments and to test battery performance under extreme conditions without compromising on safety.3 It provides an efficient approach to designing and testing new configurations of batteries from data of a single cell without building their real prototypes. The computational speed required to solve the battery models chosen for PHIL simulations must be fast in order to achieve real-time implementation. Therefore, models chosen for these simulations tend to have less complexity. However, to provide a better understanding of a battery’s response under a specific load profile, it is necessary to use a model that that accurately represents the behavior of a real battery. Real-time simulations for physics-based battery models have been explored in the past.4 , 5 , 6 It is also essential to comprehend how different battery architectures and how aging affects the overall performance. In literature, equivalent circuit models that describe charge transfer and diffusion dynamics have been used as the main way to capture battery dynamics.7 , 8 We first show results generated using SIMULINK equivalent circuit models that are compiled to run fast on our Opal-RT real-time simulator. The Opal-RT simulator drives an AMETEK 40 kW power supply with feedback to the model, enabling an emulated battery pack response capable of 10ms dynamic control. We evaluate pack configurations with physical parameters that correspond to either LCO or NMC 18650 cells. Overall, this represents a 400V, 10kW pack. A programmable load is used to modulate the emulated battery pack and monitor its dynamic response. We further explore implementing single particle models with our PHIL simulations to help understand the internal dynamics of the cell captured by these models. Physics-based models have rarely been used for PHIL. Our results show that the PHIL emulation of the battery pack meets the expectations for the battery dynamics. However, we observe high frequency noise in the output signal of the emulated battery pack. Because this level of noise is not a trait present in real battery packs, we are exploring signal processing methods to filter and remove it, while retaining the essential dynamics of the emulated battery pack. References A. Viehweider, G. Lauss, and L. Felix, Simul. Model. Pract. Theory, 19, 1699–1708 (2011). Y. He, W. Liu, and B. J. Koch, J. Power Sources, 195, 2969–2974 (2010). H. Dai, X. Zhang, X. Wei, Z. Sun, J. Wang, and F. Hu, Electr. Power Energy Syst., 52, 174–184 (2013). P. W. C. Northrop, V. Ramadesigan, S. De, and V. R. Subramanian, J. Electrochem. Soc., 158, A1461 (2011). V. R. Subramanian, V. Boovaragavan, V. Ramadesigan, and M. Arabandi, J. Electrochem. Soc., 156, A260 (2009). P. W. C. Northrop, V. Suthar, Bharatkumar Ramadesigan, S. Santhanagopalan, R. D. Braatz, and V. R. Subramanian, J. Electrochem. Soc., 161, E3149 (2014). J. V. Barreras, C. Fleischer, A. E. Christensen, M. Swierczynski, E. Schaltz, S. J. Andreasen, and D. U. Sauer, IEEE Trans. Ind. Appl., 52, 5086–5099 (2016). H. Song, T. Kim, J. Jeong, B. Kim, D. Shin, B. Lee, and H. Heo, IET Power Electron., 6, 417–424 (2013).

  • (Invited) Model-Based Battery Management System of Lithium-Ion Batteries

    by Manan Pathak, Suryanarayana Kolluri, Taejin Jang, Chintan Pathak, Shriram Santhanagopalan, Venkat R. Subramanian

    The advances in the automotive sector for plug-in hybrid electric vehicles (PHEV) and battery electric vehicles (BEV) along with penetration of renewables for power generation, cell phones and electric-flights have increased the use of batteries, as energy storage devices to a great deal. Some limitations of existing lithium-ion battery technology include underutilization, stress-induced material damage, capacity fade, and the potential for thermal runaway.1-3 Model-based control approaches (Model predictive control) can be used to design a smarter Battery Management System (BMS) that guarantees safety, efficiency, lifetime and performance of lithium-ion batteries at the stack and module level.4-7 This talk will present approaches for determining model-based optimal charging profiles for batteries, and experimental validation of the same. Optimal profiles that increase the cycle life of the cells were implemented on 16 Ah cells. An improvement of more than 100% in cycle life is observed experimentally, for our test conditions on this cell design.8 To test across multiple chemistries and form factors, optimal profiles were also implemented on a 1.5 Ah cylindrical cell, leading to an improved cycle life for these cells. The interplay between the fundamental depth in modeling, choice of numerical algorithms, and application-driven problem formulation will be presented. Acknowledgements The work presented herein was funded in part by the Advanced Research Projects Agency – Energy (ARPA-E), U.S. Department of Energy, under Award Number DE-AR0000275 along with the Clean Energy Institute (CEI) at the University of Washington (UW) and the Washington Research Foundation. References P. Arora, R.E. White, and M. Doyle, Journal of the Electrochemical Society, 145, 3647 (1998). V. Ramadesigan, P.W.C. Northrop, S. De, S. Santhanagopalan, R.D. Braatz, and V.R. Subramanian, Journal of the Electrochemical Society, 159, R31 (2012). S. Santhanagopalan, Q. Guo, P. Ramadass and R.E. White, Journal of Power Sources, 156, 620 (2006). B. Suthar, P.W.C. Northrop, R.D. Braatz,and V.R. Subramanian Journal of the Electrochemical Society, 161, F3144 (2014). B. Suthar, V. Ramadesigan, P.W.C. Northrop, B. Gopaluni, S. Santhanagopalan, R.D. Braatz, and V.R. Subramanian, in American Control Conference (ACC), p. 5350, Seattle, WA, USA (2013). M. Torchio, L. Magni, R.D. Braatz, and D.M. Raimondo, in 11th IFAC Symposium on Dynamics and Control of Process Systems, including Biosystems, p. 827, Trondheim, Norway (2016). M. Torchio, N.A. Wolff, D.M. Raimondo, L. Magni, U. Krewer, R.B. Gopaluni, J.A. Paulson, and R.D. Braatz, in American Control Conference (ACC), p. 4536, Chicago, IL, USA (2015). M. Pathak, D. Sonawane, M. Powell, S. Santhanagopalan, R.D. Braatz, and V.R. Subramanian, ECS Transactions, 75, 51 (2017).