Özlem Ege Oruç
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Özlem Ege Oruç has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
Armağan Kanca
2 shared publicationsSelma Gürler
Department of Statistics Faculty of Science Dokuz Eylül University İzmir Türkiye
2 shared publicationsAslı Gündüz
Department of Statistics DEU. Faculty of Sciences 35160 İzmir Turkey
1 shared publicationAslı SUNER
Department of Biostatistics Faculty of Medicine Erciyes University Kayseri Türkiye
1 shared publication- Aslı Suner
Faculty of Medicine, Department of Biostatistics and Medical Informatics, Ege University, İzmir, Turkey
1 shared publication B. Camgöz
Ege University
1 shared publication
Latest Publications
- Open Access
- 9 December 2024
- Published by Austrian Statistical Society in Austrian Journal of Statistics
- Vol. 53 (5) , 1-10
Prediction of Disease Stage by Machine Learning Classification Methods for Covid-19 Patients
Supervised machine learning classificitaion algorithms have been widely used in many fields in recent years. Especially, health is one of the most important areas where machine learning studies are carried out successfully. The aim of this study is to develop models that predict the disease stage of people who apply to hospital with the diagnosis of Covid-19. Inadequacies such as intensive care occupancy, insufficiency of beds, and shortage of respiratory equipment are among these problems, and this has left healthcare workers faced with the overwhelming burden of patients. Therefore, estimating the disease stages of Covid-19 patients at an early stage is of great importance. The data set used in the study includes the clinical and laboratory data of the patients during in their admission to the hospital.It has been tried to develop models that predict disease stage by using Logistic Regression, Random Forest and Support Vector Machine algorithms in the data set. The random forest model with 9 variables was the best performing model. With the models obtained, it will be ensured that the hospital management receives information in order to see the necessary treatment for low-risk or high-risk patients and to avoid medical system inadequacies.
- 9 December 2024
- Published by Austrian Statistical Society in Austrian Journal of Statistics
- Vol. 53 (5) , 1-10
Open AccessPrediction of Disease Stage by Machine Learning Classification Methods for Covid-19 Patients
Supervised machine learning classificitaion algorithms have been widely used in many fields in recent years. Especially, health is one of the most important areas where machine learning studies are carried out successfully. The aim of this study is to develop models that predict the disease stage of people who apply to hospital with the diagnosis of Covid-19. Inadequacies such as intensive care occupancy, insufficiency of beds, and shortage of respiratory equipment are among these problems, and this has left healthcare workers faced with the overwhelming burden of patients. Therefore, estimating the disease stages of Covid-19 patients at an early stage is of great importance. The data set used in the study includes the clinical and laboratory data of the patients during in their admission to the hospital.It has been tried to develop models that predict disease stage by using Logistic Regression, Random Forest and Support Vector Machine algorithms in the data set. The random forest model with 9 variables was the best performing model. With the models obtained, it will be ensured that the hospital management receives information in order to see the necessary treatment for low-risk or high-risk patients and to avoid medical system inadequacies.
- Open Access
- 24 June 2024
- Published by Türkiye Enerji Stratejileri ve Politikalari Araştirma Merkezi (TESPAM) in International Journal of Energy Studies
- Vol. 9 (2) , 291-308
Determining the most useful renewable energy alternative for Turkey by combining MAUT and TAOV methods
This study focuses on various Multi-Criteria Decision Making (MCDM) methods developed in the academic literature to facilitate the decision-making process. These methods are primarily aimed at establishing a ranking of alternatives based on specific criteria, with the ultimate goal of determining the most optimal alternative. In this work, we propose a novel integrated MCDM approach that combines the Total Area Based on Orthogonal Vectors (TAOV) method with the Multi-Attribute Utility Theory (MAUT) method. Within this framework, criteria weights are determined using the MAUT method, while the TAOV method is employed to ascertain the ranking of alternatives. The primary objective of this approach is to identify the most suitable renewable energy resource for the context of Turkey. Based on a comprehensive review of relevant literature regarding the evaluation of renewable energy sources in Turkey, a set of critical criteria influencing the decision-making process is delineated. These criteria encompass a range of factors including efficiency, construction duration, cost, government incentives, economic lifespan, external dependence, employment opportunities, social acceptance, spatial requirements, and environmental considerations such as greenhouse gas emissions. The outcomes of this study reveal that, according to the proposed approach, the most beneficial renewable energy resources for Turkey are ranked as follows: hydroelectric, wind, solar, biomass, and geothermal energy sources, respectively.
- 24 June 2024
- Published by Türkiye Enerji Stratejileri ve Politikalari Araştirma Merkezi (TESPAM) in International Journal of Energy Studies
- Vol. 9 (2) , 291-308
Open AccessDetermining the most useful renewable energy alternative for Turkey by combining MAUT and TAOV methods
This study focuses on various Multi-Criteria Decision Making (MCDM) methods developed in the academic literature to facilitate the decision-making process. These methods are primarily aimed at establishing a ranking of alternatives based on specific criteria, with the ultimate goal of determining the most optimal alternative. In this work, we propose a novel integrated MCDM approach that combines the Total Area Based on Orthogonal Vectors (TAOV) method with the Multi-Attribute Utility Theory (MAUT) method. Within this framework, criteria weights are determined using the MAUT method, while the TAOV method is employed to ascertain the ranking of alternatives. The primary objective of this approach is to identify the most suitable renewable energy resource for the context of Turkey. Based on a comprehensive review of relevant literature regarding the evaluation of renewable energy sources in Turkey, a set of critical criteria influencing the decision-making process is delineated. These criteria encompass a range of factors including efficiency, construction duration, cost, government incentives, economic lifespan, external dependence, employment opportunities, social acceptance, spatial requirements, and environmental considerations such as greenhouse gas emissions. The outcomes of this study reveal that, according to the proposed approach, the most beneficial renewable energy resources for Turkey are ranked as follows: hydroelectric, wind, solar, biomass, and geothermal energy sources, respectively.
- Open Access
- 1 January 2022
- Published by Turkiye Klinikleri in Turkiye Klinikleri Journal of Biostatistics
- Vol. 14 (3) , 137-146
A New Perspective for Area Under the Curve in Decision Making with Extra Safety Threshold Value: A Simulation Study
Objective: In studies conducted to detect a disease, making a false negative decision in cases such as detecting a deadly disease (Case I), or making a false positive decision in cases where diseases with high treatment costs (Case II) can lead to dangerous results. In this study, a new definition of the area under the curve (AUC) is proposed using a safety threshold value t for the diagnostic test to provide flexible decisions in critical cases. The alternative cut-off point for test diagnosis is evaluated by a simulation study in terms of sensitivity/specificity and relative efficiency. Materials and Methods: A simulation study was performed using different AUC values to obtain the cut-off point c shifted towards c-t for Case I and c+t for Case II. The normal distribution is used for the diseased (X) and non-diseased (Y) data. When obtaining the shift amount t, the gamma probability, which is the desired percentage of increase or decrease in the sensitivity/specificity value, is taken into account. Results: The results of our study showed that the relative efficiency is not significantly affected by working with the safety threshold t value when the test is less accurate and has a low AUC value. Conclusion: In this study, alternative cut-off points are obtained using the shift amount t determined by a predefined gamma probability. It is suggested that in critical situations, using the extra safety threshold t, determining the actual disease margin and safety standards for subjects can provide a more tolerant decision, especially in tests with low discrimination power.
- 1 January 2022
- Published by Turkiye Klinikleri in Turkiye Klinikleri Journal of Biostatistics
- Vol. 14 (3) , 137-146
Open AccessA New Perspective for Area Under the Curve in Decision Making with Extra Safety Threshold Value: A Simulation Study
Objective: In studies conducted to detect a disease, making a false negative decision in cases such as detecting a deadly disease (Case I), or making a false positive decision in cases where diseases with high treatment costs (Case II) can lead to dangerous results. In this study, a new definition of the area under the curve (AUC) is proposed using a safety threshold value t for the diagnostic test to provide flexible decisions in critical cases. The alternative cut-off point for test diagnosis is evaluated by a simulation study in terms of sensitivity/specificity and relative efficiency. Materials and Methods: A simulation study was performed using different AUC values to obtain the cut-off point c shifted towards c-t for Case I and c+t for Case II. The normal distribution is used for the diseased (X) and non-diseased (Y) data. When obtaining the shift amount t, the gamma probability, which is the desired percentage of increase or decrease in the sensitivity/specificity value, is taken into account. Results: The results of our study showed that the relative efficiency is not significantly affected by working with the safety threshold t value when the test is less accurate and has a low AUC value. Conclusion: In this study, alternative cut-off points are obtained using the shift amount t determined by a predefined gamma probability. It is suggested that in critical situations, using the extra safety threshold t, determining the actual disease margin and safety standards for subjects can provide a more tolerant decision, especially in tests with low discrimination power.
- 1 June 2019
- Published by Elsevier in Journal of Computational and Applied Mathematics
- Vol. 353, 232-242
An alternative distribution function estimation method using rational Bernstein polynomials
- 1 June 2019
- Published by Elsevier in Journal of Computational and Applied Mathematics
- Vol. 353, 232-242
An alternative distribution function estimation method using rational Bernstein polynomials
- Open Access
- 31 August 2017
- Published by Springer Nature in BMC Medical Informatics and Decision Making
- Vol. 17 (1) , 1-10
Evaluation of infectious diseases and clinical microbiology specialists’ preferences for hand hygiene: analysis using the multi-attribute utility theory and the analytic hierarchy process methods
Hand hygiene is one of the most effective attempts to control nosocomial infections, and it is an important measure to avoid the transmission of pathogens. However, the compliance of healthcare workers (HCWs) with hand washing is still poor worldwide. Herein, we aimed to determine the best hand hygiene preference of the infectious diseases and clinical microbiology (IDCM) specialists to prevent transmission of microorganisms from one patient to another. Expert opinions regarding the criteria that influence the best hand hygiene preference were collected through a questionnaire via face-to-face interviews. Afterwards, these opinions were examined with two widely used multi-criteria decision analysis (MCDA) methods, the Multi-Attribute Utility Theory (MAUT) and the Analytic Hierarchy Process (AHP). A total of 15 IDCM specialist opinions were collected from diverse private and public hospitals located in İzmir, Turkey. The mean age of the participants was 49.73 ± 8.46, and the mean experience year of the participants in their fields was 17.67 ± 11.98. The findings that we obtained through two distinct decision making methods, the MAUT and the AHP, suggest that alcohol-based antiseptic solution (ABAS) has the highest utility (0.86) and priority (0.69) among the experts’ choices. In conclusion, the MAUT and the AHP, decision models developed here indicate that rubbing the hands with ABAS is the most favorable choice for IDCM specialists to prevent nosocomial infection.
- 31 August 2017
- Published by Springer Nature in BMC Medical Informatics and Decision Making
- Vol. 17 (1) , 1-10
Open AccessEvaluation of infectious diseases and clinical microbiology specialists’ preferences for hand hygiene: analysis using the multi-attribute utility theory and the analytic hierarchy process methods
Hand hygiene is one of the most effective attempts to control nosocomial infections, and it is an important measure to avoid the transmission of pathogens. However, the compliance of healthcare workers (HCWs) with hand washing is still poor worldwide. Herein, we aimed to determine the best hand hygiene preference of the infectious diseases and clinical microbiology (IDCM) specialists to prevent transmission of microorganisms from one patient to another. Expert opinions regarding the criteria that influence the best hand hygiene preference were collected through a questionnaire via face-to-face interviews. Afterwards, these opinions were examined with two widely used multi-criteria decision analysis (MCDA) methods, the Multi-Attribute Utility Theory (MAUT) and the Analytic Hierarchy Process (AHP). A total of 15 IDCM specialist opinions were collected from diverse private and public hospitals located in İzmir, Turkey. The mean age of the participants was 49.73 ± 8.46, and the mean experience year of the participants in their fields was 17.67 ± 11.98. The findings that we obtained through two distinct decision making methods, the MAUT and the AHP, suggest that alcohol-based antiseptic solution (ABAS) has the highest utility (0.86) and priority (0.69) among the experts’ choices. In conclusion, the MAUT and the AHP, decision models developed here indicate that rubbing the hands with ABAS is the most favorable choice for IDCM specialists to prevent nosocomial infection.
- 1 January 2017
- Published by Elsevier in Computers in Human Behavior
- Vol. 66, 232-235
An investigation of factors that affect internet banking usage based on structural equation modeling
- 1 January 2017
- Published by Elsevier in Computers in Human Behavior
- Vol. 66, 232-235
An investigation of factors that affect internet banking usage based on structural equation modeling
- 20 June 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Reliability
- Vol. 65 (3) , 1562-1570
Joint Reliability Importance in Coherent Systems With Exchangeable Dependent Components
In this paper, a general formula for computing the joint reliability importance of two components is obtained for a binary coherent system that consists of exchangeable dependent components. Using the new formula, the joint reliability importance can be easily calculated if the path sets of the system are known. As a special case, an expression for the joint reliability importance of two components is also obtained for a system consisting of independent and identical components. Illustrative numerical results are presented to compare the joint reliability importance of two components in the bridge system for the two cases when the components are exchangeable dependent and when the components are independent and identical.
- 20 June 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Reliability
- Vol. 65 (3) , 1562-1570
Joint Reliability Importance in Coherent Systems With Exchangeable Dependent Components
In this paper, a general formula for computing the joint reliability importance of two components is obtained for a binary coherent system that consists of exchangeable dependent components. Using the new formula, the joint reliability importance can be easily calculated if the path sets of the system are known. As a special case, an expression for the joint reliability importance of two components is also obtained for a system consisting of independent and identical components. Illustrative numerical results are presented to compare the joint reliability importance of two components in the bridge system for the two cases when the components are exchangeable dependent and when the components are independent and identical.
- Open Access
- 1 January 2016
- Published by Turkiye Klinikleri in Turkiye Klinikleri Journal of Biostatistics
- Vol. 8 (1) , 36-44
Practical Approaches For Determination Of Sample Size In Paired Case-Control Studies
Amaç: Klinik çalışmalarda kullanılan çapraz tasarımlar veya eşleştirilmiş durum-kontrol çalışmaları bağımlı örneklemleri gerektiren deney tasarımı yöntemleridir. Deney tasarımlarında sonuçların güvenirliliğini etkileyen genellikle en zor basamaklardan biri örneklem genişliğinin belirlenmesidir. Bu çalışmanın amacı, deneysel çalışmalar yapan araştırmacılara bağımlı iki örneklem durumunda örneklem genişliğinin belirlenmesinde pratik bir yaklaşım sunmaktır. Gereç ve Yöntemler: Eşleştirilmiş (bağımlı) örneklem için sıklıkla kullanılan McNemar testinde örneklem genişliğinin belirlenmesi üzerinde detaylı bir şekilde durulmuştur. Farklı güç seviyeleri ve önem düzeyi kombinasyonlarına göre örneklem genişlikleri hesaplanmıştır. Bulgular: Eşleştirilmiş (bağımlı) örneklemler çalışmalarında sıklıkla kullanılan McNemar testi için farklı güç seviyeleri (1-β) ve önem düzeyi (α) kombinasyonlarına göre örneklem genişlikleri hesaplanmış ve sonuçlar tablolar halinde sunulmuştur. Sonuç: Klinik çalışmalarda kullanılan çapraz tasarımlar veya eşleştirilmiş durum-kontrol çalışmaları için uygun örneklem genişlikleri hesaplanmıştır. Araştırmacılara kolaylık sağlayacak şekilde tablolar halinde sunulmuş, değerlendirilerek, yorumlanmıştır.
- 1 January 2016
- Published by Turkiye Klinikleri in Turkiye Klinikleri Journal of Biostatistics
- Vol. 8 (1) , 36-44
Open AccessPractical Approaches For Determination Of Sample Size In Paired Case-Control Studies
Amaç: Klinik çalışmalarda kullanılan çapraz tasarımlar veya eşleştirilmiş durum-kontrol çalışmaları bağımlı örneklemleri gerektiren deney tasarımı yöntemleridir. Deney tasarımlarında sonuçların güvenirliliğini etkileyen genellikle en zor basamaklardan biri örneklem genişliğinin belirlenmesidir. Bu çalışmanın amacı, deneysel çalışmalar yapan araştırmacılara bağımlı iki örneklem durumunda örneklem genişliğinin belirlenmesinde pratik bir yaklaşım sunmaktır. Gereç ve Yöntemler: Eşleştirilmiş (bağımlı) örneklem için sıklıkla kullanılan McNemar testinde örneklem genişliğinin belirlenmesi üzerinde detaylı bir şekilde durulmuştur. Farklı güç seviyeleri ve önem düzeyi kombinasyonlarına göre örneklem genişlikleri hesaplanmıştır. Bulgular: Eşleştirilmiş (bağımlı) örneklemler çalışmalarında sıklıkla kullanılan McNemar testi için farklı güç seviyeleri (1-β) ve önem düzeyi (α) kombinasyonlarına göre örneklem genişlikleri hesaplanmış ve sonuçlar tablolar halinde sunulmuştur. Sonuç: Klinik çalışmalarda kullanılan çapraz tasarımlar veya eşleştirilmiş durum-kontrol çalışmaları için uygun örneklem genişlikleri hesaplanmıştır. Araştırmacılara kolaylık sağlayacak şekilde tablolar halinde sunulmuş, değerlendirilerek, yorumlanmıştır.
- 20 June 2015
- Published by Springer Nature in Environmental Earth Sciences
- Vol. 74 (7) , 6283-6292
Natural radioactivity levels of great soil groups in Seferihisar Geothermal Region, Turkey
- 20 June 2015
- Published by Springer Nature in Environmental Earth Sciences
- Vol. 74 (7) , 6283-6292
Natural radioactivity levels of great soil groups in Seferihisar Geothermal Region, Turkey
- Open Access
- 10 January 2015
- Published by Sciencedomain International in Journal of Scientific Research and Reports
- Vol. 8 (6) , 1-7
An Alternative Mean Estimator for Ranked Set Sample
Improved estimator; ranked set sample; coefficient of variation; mean squared error.
- 10 January 2015
- Published by Sciencedomain International in Journal of Scientific Research and Reports
- Vol. 8 (6) , 1-7
Open AccessAn Alternative Mean Estimator for Ranked Set Sample
Improved estimator; ranked set sample; coefficient of variation; mean squared error.