CXChen Xue

Chen Xue

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Chen Xue has a total of 25 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    State-of-Charge and State-of-Health Estimation in Li-Ion Batteries Using Cascade Electrochemical Model-Based Sliding-Mode Observers

    by Yong Feng, Chen Xue, Fengling Han, Zhenwei Cao, Rebecca Jing Yang

    This paper proposes a cascade approach based on a sliding mode observer (SMO) for estimating the state of charge (SoC) and state of health (SoH) of lithium-ion (Li-ion) batteries using a single particle model (SPM). After convergence, the observation error signal of the current node in the cascade observer is generated from the output injection signal of the previous node’s observer. The current node’s observer generates its output injection signal, leading to its convergence. This sequential process accurately determines the observed values of each node using only the battery’s current and voltage. Subsequently, the SoC and SoH are estimated using observations of lithium-ion concentrations on the surface and inside the battery anode. The accuracy of this approach is validated using Dynamic Stress Test (DST) and Federal Urban Driving Scheme (FUDS) experimental data. A comparative analysis with conventional SMO and Extended Kalman Filter (EKF) algorithms demonstrates the approach’s effectiveness and superior performance, confirming its practical applicability.


  • Open Access

    Adaptive Second-Order Sliding Mode Control of Buck Converters with Multi-Disturbances

    by Yanmin Wang, Weiqi Zhang, Yalong Yang, Chen Xue, Shibo Yuan, Hanqing Zhang

    In this paper, a novel adaptive second-order sliding mode (2-SM) control approach, based on online zero-crossing detection, was proposed to solve the problems of the chattering and fixed control gain for buck converters with multi-disturbances. In modeling, the possible parameter perturbations and external disturbances of the converter system were contained. Instead of the traditional first-order sliding mode (1-SM), the twisting algorithm with 2-SM was adopted for the controller design, which could overcome the chattering problem and realize control continuity. Meanwhile, a novel adaptive mechanism was introduced to replace the conventional fixed control gain by time-varying control gain, the idea of which is to calculate the number of the zero-crossing points of the sliding surface online. As a result, the control magnitude of the improved controller could be reduced to a minimal admissible level, and the steady error of the output voltage could converge to the expected value. Furthermore, the robust stability of the converter system with multi-disturbances wads investigated. Comparative simulations and experiments validated the advantages of this paper as offering better robustness and control performance.


  • Open Access

    Adaptive Continuous Sliding Mode Control of Buck Converters With Multidisturbances Based on Zero-Crossing Detection

    by Yanmin Wang, Weiqi Zhang, Chen Xue

    In this paper, a novel adaptive continuous sliding mode (SM) control approach is proposed based on the robust stability analysis of buck converters with multi-disturbances. Instead of the traditional first-order SM methods, the twisting algorithm is adopted to realize the control continuity and further weaken their inherent chattering problem. By introducing the zero-crossing detection innovatively, the influence of the traditional twisting algorithm with fixed control gain led to the low precision is effectively eliminated, and the small region can be controlled due to the implementation of the adaptive time-varying control gain. In addition, the magnitude of the controller can be reduced to a minimal admissible level determined by the system stable conditions and the selection of optimization parameters. Furthermore, multiple model uncertainties and external disturbances are considered into the modeling of the buck converters and the proposed adaptive SM controllers to ensure the strong robustness of the whole system while suffering possible disturbances. Finally, comparative simulations and experiments are given to validate the effectiveness of the proposed adaptive control strategy.


  • Open Access

    Sliding Mode Observer for State-of-Charge Estimation Using Hysteresis-Based Li-Ion Battery Model

    by Mengying Chen, Fengling Han, Long Shi, Yong Feng, Chen Xue, Weijie Gao, Jinzheng Xu

    Lithium-ion battery devices are essential for energy storage and supply in distributed energy generation systems. Robust battery management systems (BMSs) must guarantee that batteries work within a safe range and avoid the damage caused by overcharge and overdischarge. The state-of-charge (SoC) of Li-ion batteries is difficult to observe after batteries are manufactured. The hysteresis phenomenon influences the existing battery modeling and SoC estimation accuracy. This research applies a terminal sliding mode observer (TSMO) algorithm based on a hysteresis resistor-capacitor (RC) equivalent circuit model to enable accurate SoC estimation. The proposed method is evaluated using two dynamic battery tests: the dynamic street test (DST) and the federal urban driving schedule (FUDS) test. The simulation results show that the proposed method achieved high estimation accuracy and fast response speed. Additionally, real-time battery information, including battery output voltage and SoC, was acquired and displayed by an automatic monitoring system. The designed system is valuable for all battery application cases.


  • Neural Network Based Nonsingular Terminal Sliding-Mode Control of Induction Motors

    by Minghao Zhou, Yong Feng, Chen Xue, Long Xu

    This paper proposes a neural network based nonsingular terminal sliding-mode control for the position servo system of induction motors. A systematic design of the position and flux controllers is developed to implement the robust control of induction motors. The proposed method is presented by combining the neural network and the nonsingular terminal sliding-mode control. The method can compensate the uncertainties and enhance the stablity of induction motor systems. The controllers can attenuate the chattering phenomenon and can be directly applied in the position servo system of induction motors. The simulations validate the proposed method.


  • PEG based Construction of Irregular QC-LDPC Codes by jointly Optimizing the Girth and the Number and ACE of Short cycles

    by Dongdong Wang, Yantao Guo, Zhihui Wang, Liqian Wang, Xue Chen

    In this paper, we consider the construction of irregular QC-LDPC codes by jointly optimizing the girth, the number and approximate cycle extrinsic message degree (ACE) of short cycles to further improve the error-floor performance of irregular QC-LDPC codes with given degree distributions. By selecting the best edges, each of which must make the cycles consisting of the current variable node have the best lower bound of ACE or the minimum number of cycles with ACE lower bound, for each variable node via the progressive Edge growth (PEG) approaches, irregular QC-LDPC codes with better tradeoff between girth, the shortest cycle number and ACE could be constructed. Simulation results show that the proposed codes achieve better error-floor performance compared with the codes using the same degree distributions constructed by the recent proposed methods.

  • Robust Estimation for State-of-Charge and State-of-Health of Lithium-Ion Batteries Using Integral-Type Terminal Sliding-Mode Observers

    by Yong Feng, Chen Xue, Qing-Long Han, Fengling Han, Jiacheng Du

    This paper investigates the real-time estimation on the State-of-Charge (SoC) and State-of-Health (SoH) of Lithium-ion (Li-ion) batteries for the purpose of achieving reliable, safe and efficient use of batteries. Three terminal sliding-mode observers (TSMOs) are designed; each observer is used to estimate one variable of a LI-ion cell for developing a real-time SoC estimation algorithm. To estimate the SoH, two additional TSMOs are subsequently presented. Finally, a set of complete estimation algorithms for SoC and SoH are formulated. The output injection signals of the proposed TSMOs are designed to be continuous. This can attenuate chattering that exists in the traditional sliding-mode observers (SMOs) and simplify the estimation algorithms. The main advantage of the proposed algorithms is eliminating the low-pass-filter in the estimation algorithms. Therefore, higher estimation accuracy and faster response speed are obtained. The proposed methods are tested and evaluated using the acquired dynamic stress test (DST) and federal urban driving schedule (FUDS) test data, which demonstrate the effectiveness and feasibility.


  • On A Discrete-Time Quasi-Sliding Mode Control

    by Yong Feng, Chen Xue, Xinghuo Yu, Fengling Han

    This paper proposes a discrete-time sliding mode control approach for applications in discrete-time systems. The reaching phase and quasi-sliding mode are investigated in details, based on which the discrete-time sliding mode control strategies are developed. With the proposed method, the system states move towards the quasi-sliding mode band in finite steps and stay within that band thereafter. The quasi-sliding mode band is designed to be variant, which can increase the reaching speed of the system to the quasi-sliding mode band. The implementation of quasi-sliding motion of the system is proved theoretically. The proposed discrete-time sliding mode control can guarantee the robustness to both the internal parameter variations and the external disturbances. At the same time the controlled systems could achieve faster error convergence and higher steady-state accuracy. The simulation results show the effectiveness of the proposed method.