MAMuhammad Ayub

Muhammad Ayub

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Muhammad Ayub has a total of 225 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Brain charts for the human lifespan

    by R.A.I. Bethlehem, J. Seidlitz, S.R. White, J.W. Vogel, K.M. Anderson, C. Adamson, S. Adler, G.S. Alexopoulos, E. Anagnostou, A. Areces-Gonzalez, et al.

    Over the past few decades, neuroimaging has become a ubiquitous tool in basic research and clinical studies of the human brain. However, no reference standards currently exist to quantify individual differences in neuroimaging metrics over time, in contrast to growth charts for anthropometric traits such as height and weight 1 . Here, we built an interactive resource to benchmark brain morphology, www.brainchart.io , derived from any current or future sample of magnetic resonance imaging (MRI) data. With the goal of basing these reference charts on the largest and most inclusive dataset available, we aggregated 123,984 MRI scans from 101,457 participants aged from 115 days post-conception through 100 postnatal years, across more than 100 primary research studies. Cerebrum tissue volumes and other global or regional MRI metrics were quantified by centile scores, relative to non-linear trajectories 2 of brain structural changes, and rates of change, over the lifespan. Brain charts identified previously unreported neurodevelopmental milestones 3 ; showed high stability of individual centile scores over longitudinal assessments; and demonstrated robustness to technical and methodological differences between primary studies. Centile scores showed increased heritability compared to non-centiled MRI phenotypes, and provided a standardised measure of atypical brain structure that revealed patterns of neuroanatomical variation across neurological and psychiatric disorders. In sum, brain charts are an essential first step towards robust quantification of individual deviations from normative trajectories in multiple, commonly-used neuroimaging phenotypes. Our collaborative study proves the principle that brain charts are achievable on a global scale over the entire lifespan, and applicable to analysis of diverse developmental and clinical effects on human brain structure. Furthermore, we provide open resources to support future advances towards adoption of brain charts as standards for quantitative benchmarking of typical or atypical brain MRI scans.


  • Removal of Gas-Condensate by CO2 Huff-n-Puff Injection: A Simulation Study

    by Muhammad Ayub, Moemen Ramadan, Mohammed A. Bataweel, Abdulrahman A. Al-Mulhem

    Accumulation of gas-condensates in near wellbore regions, and consequently reduction of gas production rates, is a well-known phenomenon in most gas reservoirs all around the globe. In this study, injection of CO2 in "huff-n-puff" mode and its potential advantages of removing accumulated gas-condensates are thoroughly investigated. A compositional simulator was used to capture the near wellbore fluid flow physics causing the condensate dropout under various wellbore/field operational conditions. The severity of condensate blockage was evaluated using detailed sensitivity and uncertainty analyses of various key static and dynamic influencing parameters such as porosity, permeability, fluid composition, boundary flux, and flowing bottomhole pressure. Under various scenarios of condensate blockage, studies related to effectiveness and optimization of CO2 slug-size, soaking-time, and flowback rate are conducted. As prove of concept, it is observed that miscibility of CO2 in condensates, and near wellbore re-vaporization of accumulated liquids, are two of the main mechanisms of removing the condensate blockage. It is also concluded that CO2 is relatively more effective in removing near wellbore condensates as compared to far-field regions. Finally, based on various optimization analyses, a viable approach to adopt huff-n-puff CO2 injection scheme is suggested.


  • The Role of Capillarity in the VAPEX Process

    by M. Ayub

    The vapor extraction (VAPEX) process warrants the oil industry attention because of its applicability to recover viscous oil in the cases when steam assisted gravity drainage fails due to the presence of bottom water aquifer, low heat conductivity, thin pay zone, and excessive heat losses to the adjacent formations. Dilution of heavy oil and thus lowering the viscosity, density, interfacial tension, and capillary pressure is regarded as the basic mechanism of the VAPEX process. Although researchers have studied many influencing factors on oil recovery in VAPEX, the effect of capillary pressure has never been studied or understood completely. The objective of this study is to explore the effects of capillary pressure in the VAPEX process by combining experimental results with simulation studies. Extensive experimental studies are conducted in a rectangular transparent visual cell. Grain size distribution and model height are kept constant, while the viscosity of the targeted oil is varied. Capillary pressure and relative permeability data are obtained from flooding experiments to utilize in the simulator. Analysis of results reveals that capillary pressure acts in favor of the VAPEX process by shaping up the vapor chamber, reducing free gas production and also increasing drainage rate by increasing the effective contact area for molecular diffusion.


  • Bottomwater Reservoirs:Simulation Approach

    by K. Elkaddifi, E. Shirif, M. Ayub, A. Henni

    In many light or moderately viscous oil reservoirs in Saskatchewan and Alberta, a high inactive water saturation zone of varying thickness and extent (bottom water zone) occurs in communication with the oil zone above. As a result, the primary production period is short, and water breakthrough occurs very early in the life of the reservoir. Later, during the secondary recovery stage, such a zone can have an adverse effect on the waterflood efficiency. This paper addresses the problem of waterflooding such reservoirs. This study was directed towards reducing water mobility in the bottomwater zone for more efficient oil displacement. A commercial simulator (CMG's IMEX) was used to conduct this small scaled study. Polymer in various concentrations was used as a plugging agent in the bottomwater zone and as a mobility control agent in the oil zone. Different strategies were investigated to reduce water mobility in the bottomwater zone and improve the vertical sweep efficiency. The variables examined were: permeability ratio, oil viscosity, relative water-to-oil layer thickness, polymer concentration, injection rate and injection point, as well as the effect of vertical and horizontal injection and production well combinations. The results showed that minimizing crossflow between layers by plugging the bottom water zone could increase oil recovery. It was also found that for an unfavourable mobility ratio, as the injection rate increases, the ultimate oil recovery increases. The injection of a polymer solution had a favourable impact on waterflood performance. Moreover, the worse the conventional waterflood performance was, the more effective the polymer was as a mobility and plugging control agent. The use of horizontal wells showed slightly better oil recovery over vertical wells in a conventional waterflood of reservoirs under bottomwater conditions. In addition, some certain well combinations (horizontal production and vertical injection) gave better oil recovery due to the increase in the swept area. Introduction The efficient and economic recovery of oil from reservoirs under bottom water conditions is recognized as a formidable task. High water cuts and rapidly decreasing oil rates early in the production life of such reservoirs have, in many instances, prompted their suspension or abandonment at very low levels of oil recovery. Reservoir characteristics and rock and fluid properties combine to yield the single most important parameter (mobility ratio) in a waterflood. A number of chemicals such as polymers, emulsions, biopolymers, foam and carbon dioxide-activated silica gel have been used to control the mobility ratio. One of the oldest techniques to control mobility of water in waterflooding is the use of polymers. This control agent was shown to be effective in the early sixties by Pye(1). He performed numerous field and laboratory studies of polymer flooding using polyacrylamide solutions. It was observed experimentally that the viscosity of the water-soluble polymer solutions measured in the formation sample departed markedly from that obtained using a viscometer. He quantified the unusual departure of the measured values from the expected response as the resistance factor. It was assumed that the permeability was constant.


  • Experimental Testing of Interfacial Coupling in Two-Phase Flow in Porous Media

    by Muhammad Ayub, Ramon G. Bentsen

    Two-phase flow through natural porous media is affected by the interfacial coupling that takes place across the interfaces located in a porous medium. Such coupling may be of two types: viscous and capillary. In this study, defining equations for the capillary and viscous coupling parameters have been constructed. Moreover, these equations, together with a modified form of Kalaydjian's transport equations, have been used to analyze interfacial coupling in two-phase flow through porous media. On the basis of the analysis carried out, it is argued that interfacial coupling has no effect on steady-state, cocurrent flow, and only a small effect on unsteady-state, cocurrent flow. Moreover, it is suggested that interfacial coupling has a significant effect on steady-state, countercurrent flow. Two methods were used to test the theory. In the first method, data from steady-state, cocurrent, and countercurrent experiments were used to show that experimentally determined values of the capillary coupling parameters were in good agreement with those predicted theoretically. Because of experimental problems, it was not possible to determine experimentally, when using the first method, the magnitude of the viscous coupling parameters. In the second method, data from steady-state and unsteady-state, cocurrent flow experiments, using fluids having different viscosity ratios, and porous media having different grain-size distributions, were used to test the theory. Because of a lack of sufficient precision in the measured data, it was not possible to make definitive statements with respect to the adequacy of the theory, or the possible impact of viscosity ratio and grain-size distribution on capillary coupling. Moreover, for the same reason, it was not possible to obtain reliable estimates of the magnitude of the capillary coupling parameters. Because the second method is based on the assumption that viscous coupling is negligible, it was not possible to use this method to determine experimentally the magnitude of the viscous coupling parameters.


  • The Role of Wettability in Petroleum Recovery

    by Adetola L. Ogunberu, Muhammad Ayub

    Various findings on core handling effects and crude oil/brine/rock (COBR) interactions have indicated how the wettability of a core sample is altered when retrieved from a reservoir. Moreover, it is revealed that wettability of a core will affect almost all types of physical parameters necessary for reservoir management, such as capillary pressure. However, the most accurate results are obtained when native or restored-state cores are used with native crude oil and brine at reservoir temperature and pressure. Such conditions provide core that have the same wettability as the reservoir. Equally, the wettability of originally water-wet rock can be altered by the adsorption of polar compounds and/or the deposition of organic material that was originally in the crude oil. The degree of alteration is determined by the interaction of the oil constituents, the mineral surface, and the brine chemistry. Factors that influence wettability alteration are considered, and how this in turn affects the capillar...


  • Theoretical Analysis of Steam Assisted Gravity Drainage Process

    by H. Tarhuni, E. Shirif, M. Ayub, A. Henni

    Steam-assisted gravity drainage (SAGD) is one of the latest and the most advanced technique in heavy oil recovery processes. The determination of the swept volume in a steam chamber process provides an early means to evaluate the project's progress. The pseudosteady state method has been used to estimate the swept volume, from pressure falloff testing of horizontal wells. This method is easy to use and is identical in form to the well-known productivity equation for a vertical well. In this paper accuracy and applicability of the pseudosteady state (PSS) method in estimating the swept volume for steam injection through a horizontal well is thoroughly investigated. A commercial thermal numerical simulator (CMG, STARS) is used to generate pressure falloff data. More than 31 simulated pressure falloff tests were analyzed in order to investigate the accuracy of the analytically estimated swept volume with the simulated swept volume in the SAGD model. In addition, several parameters, such as gridblock density, duration of injection time, permeability ratio?v h??k k, steam quality, and the location of the producer, were also studied. Results of the study show that the pseudosteady state method can be used to estimate the swept volume for steam injection through a horizontal well. Within the norms of the independent parameters, the analytically estimated swept volume is in good agreement with the simulated swept volume. The standard error of estimation swept volume using the analytic technique compared to the simulated swept volume ranges from 0.3 to 30 percent Introduction: Unconventional oil reservoirs are becoming more important to the world economy as new conventional sources of hydrocarbons are becoming harder to locate. Historically, oil reserves that are difficult to recover using primary, secondary, and chemically enhanced tertiary methods have been neglected in the search for more favourable hydrocarbon reservoirs. Canada and the province of Saskatchewan in particular, contain vast resources of immobile hydrocarbons. Because of this present market, Canada has proven to be a world innovator with respect to heavy oil recovery technology. Economically feasible technologies, such as steamflooding, (SAGD), and vapour extraction (VAPEX) have been developed in order to meet world market demand. Thermal methods are the most researched area within heavy oil recovery. The most economically feasible method of transferring heat into a reservoir and the flux thereof is by the use of steam. This medium is fully utilized within the area of SAGD1,2. Recently, the innovative idea of combining horizontal well technology with heavy oil steam recovery technology has been achieved. This coupling of technology aids in the crucial heat transfer process and subsequent viscosity reduction and gravity drainage. Because SAGD processes involve transferring heat into the reservoir, a qualitative analysis of heat loss must be investigated. ccurately monitoring the swept volume over time is important for the assessment of a thermal project14. Success of a SAGD thermal project depends upon certain operational parameters such as the optimum well spacing and length of injection time. Accurately monitoring the swept volume over time is important for the assessment of a thermal project14.


  • Bottom-Water Reservoirs, Simulation Approach

    by K. Elkaddifi, E. Shirif, M. Ayub, A. Henni

    In many light or moderately viscous oil reservoirs in Saskatchewan and Alberta, a high inactive water saturation zone of varying thickness and extent ("bottom-water zone") occurs in communication with the oil zone above. As a result, the primary production period is short, and water breakthrough occurs very early in the life of the reservoir. Later, during the secondary recovery stage, such a zone can have an adverse effect on the waterflood efficiency. This Paper addresses the problem of waterflooding such reservoirs. This study was directed towards reducing water mobility in the bottom-water zone for more efficient oil displacement. A commercial simulator (CMG/IMAX) was used to conduct this study. Polymer in various concentrations was used as a blocking agent in the bottom-water zone and as a mobility control agent in the oil zone. Different strategies were investigated to reduce the water mobility in the bottom-water zone and improve the vertical sweep efficiency. The variables examined were: permeability ratio, oil viscosity, relative waterto- oil layer thickness, polymer concentration, injection rate and injection point, as well as the effect of vertical and horizontal injection and production well combinations. The results showed that minimizing crossflow between layers by blocking the bottom-water zone could increase oil recovery. It was also found that for an unfavorable mobility ratio, as the injection rate increases the ultimate oil recovery increases. The injection of a polymer solution had a favorable impact on waterflood performance. Moreover, the worse the conventional waterflood performance was, the more effective the polymer was as a mobility and blocking control agent. The use of horizontal wells showed slightly better oil recovery over vertical wells in a conventional waterflood of reservoirs under bottom-water conditions. In addition, some certain well combinations (horizontal production and vertical injection) gave better oil recovery due to the increase in the swept area. Introduction: The efficient and economic recovery of oil from reservoirs under bottom-water conditions is recognized as a formidable task. High water cuts and rapidly decreasing oil rates early in the production life of such reservoirs have in many instances prompted their suspension or abandonment at very low levels of oil recovery. Reservoir characteristics and rock and fluid properties combine to yield the single most important parameter (mobility ratio) in a waterflood. A number of chemicals such as polymers, emulsions, biopolymers, foam and carbon dioxideactivated silica gel have been used to control the mobility ratio. One of the oldest techniques to control mobility of water in waterflooding is the use of polymers. This control agent was shown to be effective in the early sixties by Pye1. He performed numerous field and laboratory studies of polymer flooding using polyacrylamide solutions. It was observed experimentally that the viscosity of the water-soluble polymer solutions measured in the formation sample departed markedly from that obtained using a viscometer. He quantified the unusual departure of the measured values from the expected response as the resistance factor. It was assumed that the permeability was constant.

  • A Novel Method for Determining Brine-Induced Incremental Oil Recovery During Waterflooding

    by A.L. Ogunberu, M. Ayub

    A modified analytical model for field application of improved waterflooding through brine concentration is presented. Based on several laboratory studies, many researchers suggested changing the brine concentration during waterflooding offered viable options for improved oil recovery. In this regard, particularly in cyclic waterflooding, several laboratory studies have confirmed the effectiveness of such approach. However, generally, these studies are limited to laboratory studies without much field application. This is based on the fact that most laboratory results did not present clearly defined approach for practical application. This paper analyses the laboratory results presented in the literature and proffers a concise approach for field application. To this end, based on the reinterpretation of the Civan and Knapp model, a modified oil recovery model is developed for field application during cyclic waterflooding. This model would help in monitoring waterflood performance based on the impact of brine injection on increased oil recovery during field application of cyclic waterflooding process. Introduction and Background: The process of improving waterflooding performance through brine concentration has obvious practical benefits. Several laboratory studies have indicated increase in oil recovery with change in injected brine salinity. Crude oil properties, particularly the solvency of high molecularweight polar component and modest increase in temperature have been shown to have a major effect on crude oil, brine and rock interacti that selection or adjustment of an injection brine composition to advantageously alter wettability is a novel method for increasing oil recovery at potentially low cost. They demonstrated that laboratory waterflood recoveries of crude-oil/brine/rock (COBR) ensembles are strongly dependent on brine composition and on related COBR interactions. To this end, it was shown that rate and extent of final waterflood recoveries increased with decrease in brine concentration. Tang and Morrow (1999) reported that modification to brine chemistry have resulted not only in changes in the wetting state, but also increasing oil recovery during laboratory corefloods. Another study (4) suggested a significant increase in recovery with decrease in salinity and presented laboratory results on oil recovery from a selected field for potential application. In addition to improved oil recovery, COBR combinations were also found where there was little or no response to injected brine composition. Bagci et al. (2001) studied the effect of brine composition on oil recovery through injection of different composition of brine into packed one-dimensional unconsolidated limestone core using Garzan crude oil and distilled water. They reported only slight response for the limestone core sample used, which confirmed findings that laboratory evaluations are essential to identifying potential candidate reservoirs for application(4). Laboratory testing has identified three key conditions for the waterflooding process to be effective through controlled.