Luini Leonardo Hurtado Cortés
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Luini Leonardo Hurtado Cortés has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- John Alejandro Forero-Casallas
Universidad Distrital Francisco José de Caldas
3 shared publications - Victor Ruiz Rosas
Universidad Distrital Francisco José de Caldas
2 shared publications - Abel Antonio Navarrete López1 shared publication
- Alejandro Moreno Hurtado
Universidad Distrital Francisco José de Caldas
1 shared publication - Alfonso Giraldo Toro
Universidad Distrital Francisco José de Caldas
1 shared publication - Edwin Villarreal-López
Electronic and Mechatronics Engineering Department, Fundación Universitaria Los Libertadores, Bogotá 111221, Colombia
1 shared publication
Latest Publications
- Open Access
- 31 March 2026
- Published by Universidad Distrital Francisco Jose de Caldas in Revista Tecnura
- Vol. 30 (87) , 90-112
Intellectual Framework of Research on Intangible Assets in MSMEs: A Comparative Analysis Between Latin America and the International Context
Objective: This article examines the thematic evolution and intellectual structure of research on intangible assets in micro, small, and medium-sized enterprises (MSMEs) through a comparative approach between Latin America and the international context. Its aim is to identify the main theoretical streams, regional gaps, and research dynamics that shape this field, highlighting both the convergences and divergences between the two contexts. Methodology: A mixed methodology was adopted, combining bibliometric techniques, such as co-citation analysis and thematic evolution, with a qualitative content review. The Scopus and Web of Science databases served as data sources, yielding a total of 683 documents published up to 2024, 54 of which correspond to Latin American affiliations. Results: The results reveal lower conceptual and methodological density in Latin American scientific production, characterized by a fragmented structure and a limited presence of consolidated theoretical frameworks. Nevertheless, emerging regional themes were identified that position intangible assets as strategic tools for productive transformation. Conclusions: The study concludes that Latin America is undergoing a delayed yet progressive alignment with the global agenda, and it highlights the need to strengthen context-specific frameworks that articulate global conceptual richness with regional realities.
- 31 March 2026
- Published by Universidad Distrital Francisco Jose de Caldas in Revista Tecnura
- Vol. 30 (87) , 90-112
Open AccessIntellectual Framework of Research on Intangible Assets in MSMEs: A Comparative Analysis Between Latin America and the International Context
Objective: This article examines the thematic evolution and intellectual structure of research on intangible assets in micro, small, and medium-sized enterprises (MSMEs) through a comparative approach between Latin America and the international context. Its aim is to identify the main theoretical streams, regional gaps, and research dynamics that shape this field, highlighting both the convergences and divergences between the two contexts. Methodology: A mixed methodology was adopted, combining bibliometric techniques, such as co-citation analysis and thematic evolution, with a qualitative content review. The Scopus and Web of Science databases served as data sources, yielding a total of 683 documents published up to 2024, 54 of which correspond to Latin American affiliations. Results: The results reveal lower conceptual and methodological density in Latin American scientific production, characterized by a fragmented structure and a limited presence of consolidated theoretical frameworks. Nevertheless, emerging regional themes were identified that position intangible assets as strategic tools for productive transformation. Conclusions: The study concludes that Latin America is undergoing a delayed yet progressive alignment with the global agenda, and it highlights the need to strengthen context-specific frameworks that articulate global conceptual richness with regional realities.
- Open Access
- 30 December 2024
- Published by Escuela Tecnologica Instituto Tecnico Central in Letras ConCiencia TecnoLógica
- No. 23,p. 48-59
Implementación del Modelo de Gerencia de Proyectos Basado en el Enfoque de Trabajo Adaptativo en una PYME del Sector Manufacturero
La Gestión de Proyectos (GDP) en las Pequeñas y Medianas Empresas (pymes) enfrenta desafíos particulares que requieren visiones flexibles y adaptables para optimizar la dirección y gobernanza de los proyectos (Reiff & Schlegel, 2022). Este artículo presenta la implementación de un modelo de gestión de proyectos (GDP) basado en el enfoque de trabajo adaptativo –Tailoring Project Management (TAPM)– (Papadakis & Tsironis, 2022), específicamente desarrollado para el sector de fabricación de maquinaria hidráulica para elevación de carga bajo pedido en pymes. A diferencia de otros modelos, este integra herramientas predictivas y ágiles, de manera que posibilita su empleo en entornos organizacionales tradicionalmente estrictos. Los resultados del estudio de caso muestran que la implementación del modelo propuesto promueve más efectiva comunicación interdepartamental, optimiza la gestión del tiempo y reduce las desviaciones de la planificación. Como principal aporte, el trabajo evidencia cómo la adaptación de prácticas de gestión de proyectos, en consideración a las limitaciones y particularidades de la organización, puede incrementar significativamente la eficiencia y flexibilidad en sus operaciones.
- 30 December 2024
- Published by Escuela Tecnologica Instituto Tecnico Central in Letras ConCiencia TecnoLógica
- No. 23,p. 48-59
Open AccessImplementación del Modelo de Gerencia de Proyectos Basado en el Enfoque de Trabajo Adaptativo en una PYME del Sector Manufacturero
La Gestión de Proyectos (GDP) en las Pequeñas y Medianas Empresas (pymes) enfrenta desafíos particulares que requieren visiones flexibles y adaptables para optimizar la dirección y gobernanza de los proyectos (Reiff & Schlegel, 2022). Este artículo presenta la implementación de un modelo de gestión de proyectos (GDP) basado en el enfoque de trabajo adaptativo –Tailoring Project Management (TAPM)– (Papadakis & Tsironis, 2022), específicamente desarrollado para el sector de fabricación de maquinaria hidráulica para elevación de carga bajo pedido en pymes. A diferencia de otros modelos, este integra herramientas predictivas y ágiles, de manera que posibilita su empleo en entornos organizacionales tradicionalmente estrictos. Los resultados del estudio de caso muestran que la implementación del modelo propuesto promueve más efectiva comunicación interdepartamental, optimiza la gestión del tiempo y reduce las desviaciones de la planificación. Como principal aporte, el trabajo evidencia cómo la adaptación de prácticas de gestión de proyectos, en consideración a las limitaciones y particularidades de la organización, puede incrementar significativamente la eficiencia y flexibilidad en sus operaciones.
- Open Access
- 2 May 2024
- Published by Universidad Cooperativa de Colombia - UCC in Ingenieria Solidaria
- Vol. 20 (2) , 1-18
Analysis of the flexural behavior of pavers made from recycled plastic; with a combination of high-density polyethylene (HLPE), low-density polyethylene (LDPE) and polypropylene (PP)
Introduction: This paper entails an analysis of flexural behavior of pavers made from recycled plastic; a combination of high-density polyethylene (HLPE), low-density polyethylene (LDPE) and polypropylene (PP), carried out in the period 2022 to 2023, with the academic support of the Universidad Distrital Francisco José de Caldas, Sede Tecnológica; Bogotá - Colombia. Problem: To perform flexural tests and analyze the behavior of pavers made from recycled plastic. Objective: To calculate the Flexural Strength (Re), Maximum Stress, Maximum Breaking Load (Cmax), Modulus of Rupture (Mr), Young’s Modulus, for a sample of 15 paving blocks made from HLPE, LDPE, PP and compare with the NTC 2017 standard. Methodology: 15 flexural tests were performed on the specimens selected for the study, and calculations were made for their respective analysis. Results: For flexural strength, the NTC 2017 standard establishes ranges of 3.8 to 4.2 MPa for individual tests and 4.2 to 5 in grouped tests; for the study carried out, a range of 10.8965 ≤ flexural strength (MPa) ≤ 13.5987 was found. Conclusion: Tests indicate that recycled plastic pavers have a higher modulus of rupture than conventional pavers. Originality: Due to the lack of existing information on the subject of paving stones, it is original to carry out a study of paving stone flexural strength and to evaluate the behavior compared to the standard. Limitations: Did not perform electron microscopy analysis on the material.
- 2 May 2024
- Published by Universidad Cooperativa de Colombia - UCC in Ingenieria Solidaria
- Vol. 20 (2) , 1-18
Open AccessAnalysis of the flexural behavior of pavers made from recycled plastic; with a combination of high-density polyethylene (HLPE), low-density polyethylene (LDPE) and polypropylene (PP)
Introduction: This paper entails an analysis of flexural behavior of pavers made from recycled plastic; a combination of high-density polyethylene (HLPE), low-density polyethylene (LDPE) and polypropylene (PP), carried out in the period 2022 to 2023, with the academic support of the Universidad Distrital Francisco José de Caldas, Sede Tecnológica; Bogotá - Colombia. Problem: To perform flexural tests and analyze the behavior of pavers made from recycled plastic. Objective: To calculate the Flexural Strength (Re), Maximum Stress, Maximum Breaking Load (Cmax), Modulus of Rupture (Mr), Young’s Modulus, for a sample of 15 paving blocks made from HLPE, LDPE, PP and compare with the NTC 2017 standard. Methodology: 15 flexural tests were performed on the specimens selected for the study, and calculations were made for their respective analysis. Results: For flexural strength, the NTC 2017 standard establishes ranges of 3.8 to 4.2 MPa for individual tests and 4.2 to 5 in grouped tests; for the study carried out, a range of 10.8965 ≤ flexural strength (MPa) ≤ 13.5987 was found. Conclusion: Tests indicate that recycled plastic pavers have a higher modulus of rupture than conventional pavers. Originality: Due to the lack of existing information on the subject of paving stones, it is original to carry out a study of paving stone flexural strength and to evaluate the behavior compared to the standard. Limitations: Did not perform electron microscopy analysis on the material.
- 7 February 2024
- Published by Springer Nature
- p. 224-234
Interactive Algorithms: A Didactic Strategy for Non-programmers
- 7 February 2024
- Published by Springer Nature
- p. 224-234
Interactive Algorithms: A Didactic Strategy for Non-programmers
- 9 April 2022
- Published by Springer Nature
- p. 844-855
HAS-200 Lab Virtualization in Times of Pandemic
- Open Access
- 30 January 2021
- Published by Universidad Distrital Francisco Jose de Caldas in Visión electrónica
- Vol. 15 (1) , 113-122
Artificial vision applied to manufacturing process
This article presents the results of the implementation of artificial vision and image processing projects applied to a parts manufacturing process. In a first scenario, three-dimensional computational geometric models of the parts to be manufactured were obtained from the capture and processing of thermo-graphic images. In a later stage of the manufacturing process, a direct measurement system for cutting tool wear was implemented using HD images with image processing software using NI Lab VIEW from National Instruments®. In the final stage of parts manufacturing, the development of software (UDmetaL Handbook) for the quantitative metallographic analysis of micrographs for hypoeutectoid steels is presented. The software determines the type of steel based on the percentage of carbon and finds the mechanical properties of the material in a database that is incorporated into the software. The software's basis of operation is computational analysis through digital processing of metallographic images obtained through experimental laboratory processes using NI Lab VIEW software from National Instruments®. En este artículo se presentan los resultados de la implementación de proyectos de visión artificial y procesamiento de imágenes aplicados a un proceso de manufactura de piezas. En un primer escenario se obtuvieron modelos geométricos computacionales tridimensionales de las piezas a fabricar a partir de la captura y procesamiento de imágenes termográficas. En una fase posterior del proceso de fabricación se implementó un sistema de medición directo del desgaste de la herramienta de corte mediante imágenes HD con un software de procesamiento de imagen por medio de NI LabVIEW de National Instruments®. Y en una de las fases finales de manufactura de las piezas se presenta el desarrollo de un software (UDmetaL Handbook) para el análisis metalográfico cuantitativo de micrografías para aceros hipoeutectoides. El software es capaz de determinar el tipo de acero de acuerdo al porcentaje de carbono y con base a éste encontrar las propiedades mecánicas del material con una base de datos que viene incorporada al software. La base de funcionamiento del software es el análisis computacional mediante el procesamiento digital de imágenes metalográficas obtenidas mediante procesos experimentales de laboratorio por medio del software NI LabVIEW de National Instruments®.
- 30 January 2021
- Published by Universidad Distrital Francisco Jose de Caldas in Visión electrónica
- Vol. 15 (1) , 113-122
Open AccessArtificial vision applied to manufacturing process
This article presents the results of the implementation of artificial vision and image processing projects applied to a parts manufacturing process. In a first scenario, three-dimensional computational geometric models of the parts to be manufactured were obtained from the capture and processing of thermo-graphic images. In a later stage of the manufacturing process, a direct measurement system for cutting tool wear was implemented using HD images with image processing software using NI Lab VIEW from National Instruments®. In the final stage of parts manufacturing, the development of software (UDmetaL Handbook) for the quantitative metallographic analysis of micrographs for hypoeutectoid steels is presented. The software determines the type of steel based on the percentage of carbon and finds the mechanical properties of the material in a database that is incorporated into the software. The software's basis of operation is computational analysis through digital processing of metallographic images obtained through experimental laboratory processes using NI Lab VIEW software from National Instruments®. En este artículo se presentan los resultados de la implementación de proyectos de visión artificial y procesamiento de imágenes aplicados a un proceso de manufactura de piezas. En un primer escenario se obtuvieron modelos geométricos computacionales tridimensionales de las piezas a fabricar a partir de la captura y procesamiento de imágenes termográficas. En una fase posterior del proceso de fabricación se implementó un sistema de medición directo del desgaste de la herramienta de corte mediante imágenes HD con un software de procesamiento de imagen por medio de NI LabVIEW de National Instruments®. Y en una de las fases finales de manufactura de las piezas se presenta el desarrollo de un software (UDmetaL Handbook) para el análisis metalográfico cuantitativo de micrografías para aceros hipoeutectoides. El software es capaz de determinar el tipo de acero de acuerdo al porcentaje de carbono y con base a éste encontrar las propiedades mecánicas del material con una base de datos que viene incorporada al software. La base de funcionamiento del software es el análisis computacional mediante el procesamiento digital de imágenes metalográficas obtenidas mediante procesos experimentales de laboratorio por medio del software NI LabVIEW de National Instruments®.
- 11 August 2020
- Published by Springer Nature
- p. 365-374
Calculation of the Depth of Field in Digital Camera Using Fuzzy Inference Systems
- 11 August 2020
- Published by Springer Nature
- p. 365-374
Calculation of the Depth of Field in Digital Camera Using Fuzzy Inference Systems
- Open Access
- 6 December 2019
- Published by Universidad Distrital Francisco Jose de Caldas in Visión electrónica
- Vol. 2 (2) , 304-312
Identification and fault detection in actuator using NN-NARX
In this paper, the use of a Nonlinear Auto Regressive eXogenous Neural Networks model or NN-NARX for identification and fault detection in the actuator of an industrial thermal process is presented. Initially, the techniques of fault detection and diagnosis are exposed; then, emphasis is placed on the models of Artificial Neural Networks for identification and fault detection. Subsequently, the control system of a thermal process used as a case study is described. A monitoring system allows data recording under normal operation conditions for identification using the NN-NARX model. The model is used for residual online generation due to faults that are introduced randomly. Finally, the results of residual generation and evaluation are presented. The designed system is useful for implementation through a hardware device that can be incorporated into the process equipment and support the operator in the presence of failures.
- 6 December 2019
- Published by Universidad Distrital Francisco Jose de Caldas in Visión electrónica
- Vol. 2 (2) , 304-312
Open AccessIdentification and fault detection in actuator using NN-NARX
In this paper, the use of a Nonlinear Auto Regressive eXogenous Neural Networks model or NN-NARX for identification and fault detection in the actuator of an industrial thermal process is presented. Initially, the techniques of fault detection and diagnosis are exposed; then, emphasis is placed on the models of Artificial Neural Networks for identification and fault detection. Subsequently, the control system of a thermal process used as a case study is described. A monitoring system allows data recording under normal operation conditions for identification using the NN-NARX model. The model is used for residual online generation due to faults that are introduced randomly. Finally, the results of residual generation and evaluation are presented. The designed system is useful for implementation through a hardware device that can be incorporated into the process equipment and support the operator in the presence of failures.
- Open Access
- 1 October 2016
- Published by Universidad Nacional de Colombia in DYNA
- Vol. 83 (199)
Detección y diagnóstico de fallas mediante técnicas de inteligencia artificial, un estado del arte
Este artículo presenta el estado actual de las técnicas de inteligencia artificial y su aplicación al campo de la detección y diagnóstico de fallas en sistemas dinámicos. Inicialmente, se hace una breve descripción de lo que se considera un mecanismo de detección y diagnóstico de fallas, y se explican los enfoques actuales de estudio y aplicación de tales mecanismos. Posteriormente, se presentan los resultados más importantes de las diferentes técnicas de inteligencia artificial aplicadas a la detección y diagnóstico de fallas. Finalmente, se presenta un análisis comparativo con base en las características deseables de los mecanismos de detección y diagnóstico de fallas. El artículo concluye mencionando los beneficios de la clasificación de las técnicas presentadas y enumerando las posibles vías hacia donde debe ir la investigación en este campo.
- 1 October 2016
- Published by Universidad Nacional de Colombia in DYNA
- Vol. 83 (199)
Open AccessDetección y diagnóstico de fallas mediante técnicas de inteligencia artificial, un estado del arte
Este artículo presenta el estado actual de las técnicas de inteligencia artificial y su aplicación al campo de la detección y diagnóstico de fallas en sistemas dinámicos. Inicialmente, se hace una breve descripción de lo que se considera un mecanismo de detección y diagnóstico de fallas, y se explican los enfoques actuales de estudio y aplicación de tales mecanismos. Posteriormente, se presentan los resultados más importantes de las diferentes técnicas de inteligencia artificial aplicadas a la detección y diagnóstico de fallas. Finalmente, se presenta un análisis comparativo con base en las características deseables de los mecanismos de detección y diagnóstico de fallas. El artículo concluye mencionando los beneficios de la clasificación de las técnicas presentadas y enumerando las posibles vías hacia donde debe ir la investigación en este campo.
- Open Access
- 8 June 2015
- Published by Universidad Distrital Francisco Jose de Caldas in Visión electrónica
- Vol. 9 (1) , 83-89
Arquitectura paralela robótica: modelado y simulación con siemens nx®
Se muestra el desarrollo de modelamientos basados en la arquitectura paralela, describiendo detalladamente el proceso con la plataforma Siemens NX®; vista esta como dispositivos multifuncionales diseñados para mover partes o herramientas a través de movimientos programados para la realización de tareas específicas, compuestos por cadenas cinemáticas conectadas a un eslabón fijo. Gracias a esta cinemática es posible estudiar las trayectorias de los eslabones en función del tiempo, unidos por juntas, las cuales limitan su movilidad. La perspectiva de desarrollo que se muestra está en la vía de orientar implementaciones de laboratorios presenciales en robótica básica.
- 8 June 2015
- Published by Universidad Distrital Francisco Jose de Caldas in Visión electrónica
- Vol. 9 (1) , 83-89
Open AccessArquitectura paralela robótica: modelado y simulación con siemens nx®
Se muestra el desarrollo de modelamientos basados en la arquitectura paralela, describiendo detalladamente el proceso con la plataforma Siemens NX®; vista esta como dispositivos multifuncionales diseñados para mover partes o herramientas a través de movimientos programados para la realización de tareas específicas, compuestos por cadenas cinemáticas conectadas a un eslabón fijo. Gracias a esta cinemática es posible estudiar las trayectorias de los eslabones en función del tiempo, unidos por juntas, las cuales limitan su movilidad. La perspectiva de desarrollo que se muestra está en la vía de orientar implementaciones de laboratorios presenciales en robótica básica.