Leigh Wardhaugh
Research Subjects
Leigh Wardhaugh has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- Paul Feron
CSIRO Energy
15 shared publications Hai Yu
8 shared publicationsAndrew Allport
4 shared publications- Kangkang Li
Department of Energy and Resources Engineering, College of Engineering, Peking University, Beijing, China
4 shared publications Shujuan Wang
4 shared publicationsDan Maher
CSIRO Energy Centre Mayfield West NSW Australia
3 shared publications
Latest Publications
- 11 January 2019
- Published by Wiley in Greenhouse Gases: Science and Technology
- Vol. 9 (2) , 245-260
Process enhancement in aqueous ammonia PCC using a direct contact condenser
- 11 January 2019
- Published by Wiley in Greenhouse Gases: Science and Technology
- Vol. 9 (2) , 245-260
Process enhancement in aqueous ammonia PCC using a direct contact condenser
- 1 December 2017
- Published by Elsevier in Applied Energy
- Vol. 208, 263-276
Energy-efficient solvent regeneration in enzymatic reactive absorption for carbon dioxide capture
- 1 December 2017
- Published by Elsevier in Applied Energy
- Vol. 208, 263-276
Energy-efficient solvent regeneration in enzymatic reactive absorption for carbon dioxide capture
- 1 September 2017
- Published by Elsevier in Applied Energy
- Vol. 202, 496-506
Advancement of ammonia based post-combustion CO2 capture using the advanced flash stripper process
- 1 September 2017
- Published by Elsevier in Applied Energy
- Vol. 202, 496-506
Advancement of ammonia based post-combustion CO2 capture using the advanced flash stripper process
- Open Access
- 1 July 2017
- Published by Elsevier in Energy Procedia
- Vol. 114, 1956-1965
A New CO2 Absorbent Developed from Addressing Benzylamine Vapour Pressure Using Co-solvents
- 1 July 2017
- Published by Elsevier in Energy Procedia
- Vol. 114, 1956-1965
Open AccessA New CO2 Absorbent Developed from Addressing Benzylamine Vapour Pressure Using Co-solvents
- 1 March 2017
- Published by Elsevier in Chemical Engineering and Processing - Process Intensification
- Vol. 113, 102-117
Design and performance of the rotating liquid sheet contactor
- 1 March 2017
- Published by Elsevier in Chemical Engineering and Processing - Process Intensification
- Vol. 113, 102-117
Design and performance of the rotating liquid sheet contactor
- 3 December 2016
- Published by Springer Nature
- p. 27-67
Process Implications of CO2 Capture Solvent Selection
- 3 December 2016
- Published by Springer Nature
- p. 27-67
Process Implications of CO2 Capture Solvent Selection
- 1 October 2016
- Published by Elsevier in International Journal of Greenhouse Gas Control
- Vol. 53, 319-327
Techno-economic assessment of stripping modifications in an ammonia-based post-combustion capture process
- 1 October 2016
- Published by Elsevier in International Journal of Greenhouse Gas Control
- Vol. 53, 319-327
Techno-economic assessment of stripping modifications in an ammonia-based post-combustion capture process
- 23 September 2016
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 50 (19) , 10746-10755
Technoeconomic Assessment of an Advanced Aqueous Ammonia-Based Postcombustion Capture Process Integrated with a 650-MW Coal-Fired Power Station
Using a rigorous, rate-based model and a validated economic model, we investigated the technoeconomic performance of an aqueous NH3-based CO2 capture process integrated with a 650-MW coal-fired power station. First, the baseline NH3 process was explored with the process design of simultaneous capture of CO2 and SO2 to replace the conventional FGD unit. This reduced capital investment of the power station by US$425/kW (a 13.1% reduction). Integration of this NH3 baseline process with the power station takes the CO2-avoided cost advantage over the MEA process (US$67.3/tonne vs US$86.4/tonne). We then investigated process modifications of a two-stage absorption, rich-split configuration and interheating stripping to further advance the NH3 process. The modified process reduced energy consumption by 31.7 MW/h (20.2% reduction) and capital costs by US$55.4 million (6.7% reduction). As a result, the CO2-avoided cost fell to $53.2/tonne: a savings of $14.1 and $21.9/tonne CO2 compared with the NH3 baseline and advanced MEA process, respectively. The analysis of energy breakdown and cost distribution indicates that the technoeconomic performance of the NH3 process still has great potential to be improved.
- 23 September 2016
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 50 (19) , 10746-10755
Technoeconomic Assessment of an Advanced Aqueous Ammonia-Based Postcombustion Capture Process Integrated with a 650-MW Coal-Fired Power Station
Using a rigorous, rate-based model and a validated economic model, we investigated the technoeconomic performance of an aqueous NH3-based CO2 capture process integrated with a 650-MW coal-fired power station. First, the baseline NH3 process was explored with the process design of simultaneous capture of CO2 and SO2 to replace the conventional FGD unit. This reduced capital investment of the power station by US$425/kW (a 13.1% reduction). Integration of this NH3 baseline process with the power station takes the CO2-avoided cost advantage over the MEA process (US$67.3/tonne vs US$86.4/tonne). We then investigated process modifications of a two-stage absorption, rich-split configuration and interheating stripping to further advance the NH3 process. The modified process reduced energy consumption by 31.7 MW/h (20.2% reduction) and capital costs by US$55.4 million (6.7% reduction). As a result, the CO2-avoided cost fell to $53.2/tonne: a savings of $14.1 and $21.9/tonne CO2 compared with the NH3 baseline and advanced MEA process, respectively. The analysis of energy breakdown and cost distribution indicates that the technoeconomic performance of the NH3 process still has great potential to be improved.
- 24 July 2015
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 49 (16) , 10243-10252
Technical and Energy Performance of an Advanced, Aqueous Ammonia-Based CO2 Capture Technology for a 500 MW Coal-Fired Power Station
Using a rate-based model, we assessed the technical feasibility and energy performance of an advanced aqueous-ammonia-based postcombustion capture process integrated with a coal-fired power station. The capture process consists of three identical process trains in parallel, each containing a CO2 capture unit, an NH3 recycling unit, a water separation unit, and a CO2 compressor. A sensitivity study of important parameters, such as NH3 concentration, lean CO2 loading, and stripper pressure, was performed to minimize the energy consumption involved in the CO2 capture process. Process modifications of the rich-split process and the interheating process were investigated to further reduce the solvent regeneration energy. The integrated capture system was then evaluated in terms of the mass balance and the energy consumption of each unit. The results show that our advanced ammonia process is technically feasible and energy-competitive, with a low net power-plant efficiency penalty of 7.7%.
- 24 July 2015
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 49 (16) , 10243-10252
Technical and Energy Performance of an Advanced, Aqueous Ammonia-Based CO2 Capture Technology for a 500 MW Coal-Fired Power Station
Using a rate-based model, we assessed the technical feasibility and energy performance of an advanced aqueous-ammonia-based postcombustion capture process integrated with a coal-fired power station. The capture process consists of three identical process trains in parallel, each containing a CO2 capture unit, an NH3 recycling unit, a water separation unit, and a CO2 compressor. A sensitivity study of important parameters, such as NH3 concentration, lean CO2 loading, and stripper pressure, was performed to minimize the energy consumption involved in the CO2 capture process. Process modifications of the rich-split process and the interheating process were investigated to further reduce the solvent regeneration energy. The integrated capture system was then evaluated in terms of the mass balance and the energy consumption of each unit. The results show that our advanced ammonia process is technically feasible and energy-competitive, with a low net power-plant efficiency penalty of 7.7%.
- 1 May 2015
- Published by Elsevier in Separation and Purification Technology
- Vol. 146, 60-67
Membrane evaporation of amine solution for energy saving in post-combustion carbon capture: Wetting and condensation
- 1 May 2015
- Published by Elsevier in Separation and Purification Technology
- Vol. 146, 60-67
Membrane evaporation of amine solution for energy saving in post-combustion carbon capture: Wetting and condensation