Aliyu Idris Muhammad
Research Subjects
Aliyu Idris Muhammad has a total of 90 co-authors. Here are the top co-authors by number of shared publications:
- Donghong Liu
College of Biosystems Engineering and Food Science Zhejiang University Hangzhou China
16 shared publications Xingqian Ye
College of Biosystems Engineering and Food Science, Zhejiang Key Laboratory for Agro-Food Processing, Zhejiang University, Hangzhou, China
14 shared publications- Tian Ding
College of Biosystems Engineering and Food Science Zhejiang University Hangzhou China
12 shared publications Xinyu Liao
College of Biosystems Engineering and Food Science, Zhejiang Key Laboratory for Agro-Food Processing, Zhejiang University, Hangzhou, China
12 shared publicationsDonghong Liu
Department of Food Science and Nutrition, Zhejiang Key Laboratory for Agro-Food Processing, Zhejiang University, Hangzhou, China
9 shared publicationsTian Ding
Department of Food Science and Nutrition, Zhejiang Key Laboratory for Agro-Food Processing, Zhejiang University, Hangzhou, Zhejiang, China
9 shared publications
Latest Publications
- 28 July 2023
- Published by Taylor & Francis in Critical Reviews in Food Science and Nutrition
- Vol. 64 (30) , 11146-11160
Bacillus spore germination: mechanisms, identification, and antibacterial strategies
Bacterial spores are metabolically inactive and highly resistant to harsh environmental conditions in nature and during decontamination processes in food and related industries. However, inducing germination using specific germinants in dormant spores can convert them into vegetative cells which are metabolically active and fragile. The potential utility of a "germinate to eradicate" strategy, also known as germination-inactivation, has been validated in foods. Meanwhile, the strategy has sparked much interest in triggering and maximizing spore germination. Although many details of the spore germination process have been identified over the past decades, there remain many uncertainties, including some signal transduction mechanisms involved in germination. In addition, the successful implementation of the germination-inactivation strategy relies on the sensitive detection of germinative biomarkers within minutes of germination initiation and the optimal timing for the subsequent inactivation step. Meanwhile, the emergence of biomarkers has renewed attention to the practical application of the spore germination process. Here, this review presents the current knowledge of the germination mechanisms of Bacillus spore, influencing factors, and germination biomarkers. It also covers a detailed discussion on the development of germination-inactivation as a spore eradication strategy.
- 28 July 2023
- Published by Taylor & Francis in Critical Reviews in Food Science and Nutrition
- Vol. 64 (30) , 11146-11160
Bacillus spore germination: mechanisms, identification, and antibacterial strategies
Bacterial spores are metabolically inactive and highly resistant to harsh environmental conditions in nature and during decontamination processes in food and related industries. However, inducing germination using specific germinants in dormant spores can convert them into vegetative cells which are metabolically active and fragile. The potential utility of a "germinate to eradicate" strategy, also known as germination-inactivation, has been validated in foods. Meanwhile, the strategy has sparked much interest in triggering and maximizing spore germination. Although many details of the spore germination process have been identified over the past decades, there remain many uncertainties, including some signal transduction mechanisms involved in germination. In addition, the successful implementation of the germination-inactivation strategy relies on the sensitive detection of germinative biomarkers within minutes of germination initiation and the optimal timing for the subsequent inactivation step. Meanwhile, the emergence of biomarkers has renewed attention to the practical application of the spore germination process. Here, this review presents the current knowledge of the germination mechanisms of Bacillus spore, influencing factors, and germination biomarkers. It also covers a detailed discussion on the development of germination-inactivation as a spore eradication strategy.
- Open Access
- 28 February 2023
- Published by Federal University Dutsin-Ma in FUDMA JOURNAL OF SCIENCES
- Vol. 7 (1) , 35-39
MODIFICATION OF AN EXISTING HOLD-ON RICE THRESHER
Manual paddy threshing using metal drums with attendant low output and high losses is still being widely used in the Kano-Kura rice cluster. An existing stationary Hold-on thresher designed to address these, was modified and evaluated. The thresher was designed taking all peculiar technical considerations. It was then fabricated using available materials. Paddy Faro 44 variety at a mean moisture content of 13 % (w. b.) was used for evaluation in this study. The independent variables consist of three different speeds 500, 600 and 700 rpm and two feed rates of 200 and 300 kg/h were used. Factorial experiments were conducted in a completely randomized design with three replications. The performance dependent indices used were output capacity, threshing efficiency and cleaning efficiency. The analysis was done using GENSTAT statistical package. It was found out that the effects of variables on the performance indices were highly significant. The mean highest value of the output capacity was 229.09 kg/h at the combination of 700 rpm speed and 300 kg/h feed rate. The mean value obtained for the threshing was 99.99 % and is statistically similar for all the combinations. The cleaning efficiency indicate highest value of 85 % at the combination of 500 rpm speed and 200 kg/h feed rate. T-test for comparison between machine performance and manual threshing showed that the mean value for output capacity, threshing efficiency and cleaning efficiency for the machine are significantly higher than the manual threshing, the, the machine performance has promising prospect.
- 28 February 2023
- Published by Federal University Dutsin-Ma in FUDMA JOURNAL OF SCIENCES
- Vol. 7 (1) , 35-39
Open AccessMODIFICATION OF AN EXISTING HOLD-ON RICE THRESHER
Manual paddy threshing using metal drums with attendant low output and high losses is still being widely used in the Kano-Kura rice cluster. An existing stationary Hold-on thresher designed to address these, was modified and evaluated. The thresher was designed taking all peculiar technical considerations. It was then fabricated using available materials. Paddy Faro 44 variety at a mean moisture content of 13 % (w. b.) was used for evaluation in this study. The independent variables consist of three different speeds 500, 600 and 700 rpm and two feed rates of 200 and 300 kg/h were used. Factorial experiments were conducted in a completely randomized design with three replications. The performance dependent indices used were output capacity, threshing efficiency and cleaning efficiency. The analysis was done using GENSTAT statistical package. It was found out that the effects of variables on the performance indices were highly significant. The mean highest value of the output capacity was 229.09 kg/h at the combination of 700 rpm speed and 300 kg/h feed rate. The mean value obtained for the threshing was 99.99 % and is statistically similar for all the combinations. The cleaning efficiency indicate highest value of 85 % at the combination of 500 rpm speed and 200 kg/h feed rate. T-test for comparison between machine performance and manual threshing showed that the mean value for output capacity, threshing efficiency and cleaning efficiency for the machine are significantly higher than the manual threshing, the, the machine performance has promising prospect.
- 1 January 2023
- Published by ScopeMed in Nigerian Journal of Engineering
- Vol. 30 (3)
EVALUATION OF TYPHA GRASS AS POTENTIAL FEEDSTOCK FOR THE PRODUCTION OF FUEL BRIQUETTE
This study established that a minimum of 2, 738.61 metric tons of fresh typha grass (TG) could be obtained from some of the Kano River Irrigation Scheme’s facilities per perennial cycle of the TG. Some sample of fresh TG was randomly harvested and sun dried without any treatment. The dried TG was subjected to some physico-chemical characterizations (moiture content (%), ash content (%), char content (%), and calorific value (MJ/kg)). The results recorded suggeested TG as a potential material for fuel briquette production. Furthermore, the dried TG was carbonized and used to produce typha grass fuel briquettes (TB) using five (5) tons hydraulic press machine, three different binding materials (arabic gum (AG), starch (S), and cement (C) at three different dosages (4, 9, and 12% (wt/wt)). The results achieved reveals that the TB produced with starch binding material at 12% dosage exhibited superior properties, including, 97.5 ± 2.00%, 1970±170 (kg/m3), 68.22%, 26.45±0.22 MJ/kg, 140 ± 0.22 min, 0.42 ± 0.21 g/min, and 277± 0.06 ppm recorded for mechanical durability, bulk density, char content, calorific value, water boiling test, specific fuel consumption rate, and carbon monoxide emission, respectively. Overall, the TG was found to be abundant enough to be adopted as a feedstock for the production of fuel briquette. Its properties and the produced TB properties have shown that TG is a suitable candidate for the fuel briquettes production.
- 1 January 2023
- Published by ScopeMed in Nigerian Journal of Engineering
- Vol. 30 (3)
EVALUATION OF TYPHA GRASS AS POTENTIAL FEEDSTOCK FOR THE PRODUCTION OF FUEL BRIQUETTE
This study established that a minimum of 2, 738.61 metric tons of fresh typha grass (TG) could be obtained from some of the Kano River Irrigation Scheme’s facilities per perennial cycle of the TG. Some sample of fresh TG was randomly harvested and sun dried without any treatment. The dried TG was subjected to some physico-chemical characterizations (moiture content (%), ash content (%), char content (%), and calorific value (MJ/kg)). The results recorded suggeested TG as a potential material for fuel briquette production. Furthermore, the dried TG was carbonized and used to produce typha grass fuel briquettes (TB) using five (5) tons hydraulic press machine, three different binding materials (arabic gum (AG), starch (S), and cement (C) at three different dosages (4, 9, and 12% (wt/wt)). The results achieved reveals that the TB produced with starch binding material at 12% dosage exhibited superior properties, including, 97.5 ± 2.00%, 1970±170 (kg/m3), 68.22%, 26.45±0.22 MJ/kg, 140 ± 0.22 min, 0.42 ± 0.21 g/min, and 277± 0.06 ppm recorded for mechanical durability, bulk density, char content, calorific value, water boiling test, specific fuel consumption rate, and carbon monoxide emission, respectively. Overall, the TG was found to be abundant enough to be adopted as a feedstock for the production of fuel briquette. Its properties and the produced TB properties have shown that TG is a suitable candidate for the fuel briquettes production.
- 23 December 2022
- Published by Vytautas Magnus University in Agricultural Engineering / Žemės ūkio Inžinerija
- Vol. 54, 91-100
Development of a single row animal drawn groundnut digger for smallholder groundnut farmers in Sudan Savannah of Nigeria
Harvesting groundnut is a serious problem in the Sudan Savannah of Northern Nigeria. The small- and medium scale farmers harvest their groundnuts manually using traditional tools such as hoe. This practice is laborious, time-consuming, and leads to pod losses due to inefficient groundnut harvesting implement. In addition, the tractor-mounted groundnut harvesters are too expensive for these farmers to acquire. In view of the aforementioned, problems, a prototype of an animal-drawn groundnut digger was developed considering the agronomical and functional requirements for digging groundnut crops. The major components of the groundnut digger include a cutting blade, depth control wheel, frame, handles, and draft pole. A pair of bullocks pull the groundnut digger. The outcome of this research study could be used in reducing the drudgery involved during the digging of groundnut from the soil. The implement would also reduce pod losses, and boost agricultural mechanization during groundnut harvesting operations in the Sudan Savannah of Nigeria.
- 23 December 2022
- Published by Vytautas Magnus University in Agricultural Engineering / Žemės ūkio Inžinerija
- Vol. 54, 91-100
Development of a single row animal drawn groundnut digger for smallholder groundnut farmers in Sudan Savannah of Nigeria
Harvesting groundnut is a serious problem in the Sudan Savannah of Northern Nigeria. The small- and medium scale farmers harvest their groundnuts manually using traditional tools such as hoe. This practice is laborious, time-consuming, and leads to pod losses due to inefficient groundnut harvesting implement. In addition, the tractor-mounted groundnut harvesters are too expensive for these farmers to acquire. In view of the aforementioned, problems, a prototype of an animal-drawn groundnut digger was developed considering the agronomical and functional requirements for digging groundnut crops. The major components of the groundnut digger include a cutting blade, depth control wheel, frame, handles, and draft pole. A pair of bullocks pull the groundnut digger. The outcome of this research study could be used in reducing the drudgery involved during the digging of groundnut from the soil. The implement would also reduce pod losses, and boost agricultural mechanization during groundnut harvesting operations in the Sudan Savannah of Nigeria.
- 9 November 2021
- Published by Springer Nature
- p. 269-291
Application of Cold Plasma in Liquid Food Products
- 9 November 2021
- Published by Springer Nature
- p. 269-291
Application of Cold Plasma in Liquid Food Products
- Open Access
- 16 June 2021
- Published by IntechOpen
Greenhouse Requirements for Soilless Crop Production: Challenges and Prospects for Plant Factories
This chapter discussed the greenhouse requirement for soilless crop production. It further introduced soilless crop production and elucidated the equipment required for an efficient production system covering greenhouse environmental control and management of temperature, humidity, lighting, and nutrients using innovative strategies. Also, the energy required for the control of the greenhouse environmental conditions during the crop production cycle was explained. Identification and management of pests and diseases using wireless network sensors and the Internet of Things for efficient and safe food production were also highlighted. Finally, the challenges facing greenhouse crop production itemized, and the prospects of greenhouse technology for sustainable healthy food production were proposed.
- 16 June 2021
- Published by IntechOpen
Open AccessGreenhouse Requirements for Soilless Crop Production: Challenges and Prospects for Plant Factories
This chapter discussed the greenhouse requirement for soilless crop production. It further introduced soilless crop production and elucidated the equipment required for an efficient production system covering greenhouse environmental control and management of temperature, humidity, lighting, and nutrients using innovative strategies. Also, the energy required for the control of the greenhouse environmental conditions during the crop production cycle was explained. Identification and management of pests and diseases using wireless network sensors and the Internet of Things for efficient and safe food production were also highlighted. Finally, the challenges facing greenhouse crop production itemized, and the prospects of greenhouse technology for sustainable healthy food production were proposed.
- Open Access
- 11 October 2020
- Published by Wiley in Comprehensive Reviews in Food Science and Food Safety
- Vol. 19 (6) , 3501-3527
Recent advances on the application of UV‐LED technology for microbial inactivation: Progress and mechanism
Conventional technologies for the inactivation of microorganisms in food products have their limitations, especially changes in quality attributes that have led to quality deterioration, low consumer acceptance, impact on the environment, and potential health hazards (carcinogens). Ultraviolet (UV) light is an emerging promising nonthermal technology employed for microbial inactivation in water, liquid, and solid food products to curtail the limitations above. This review provides an insight into UV light‐emitting diodes (UV‐LEDs)' potential as an alternative to the traditional UV lamps for microbial inactivation in liquid and solid media. Also, the mechanisms of inactivation of lone and combined UVA‐, UVB‐, and UVC‐LEDs were discussed. The strategies utilized to improve the efficacy between the UV‐LED treatments at various wavelengths were summarized. Combining different UV‐LEDs treatments at different wavelengths have a synergistic effect and suppression of microbial cell reactivation. The UV‐LED‐based advanced oxidation processes (AOPs) also have high germicidal action against numerous microorganisms and are efficient for the degradation of micropollutants. Among the UV‐LEDs discussed, UVC‐LED has the most antimicrobial effect with the most efficient micropollutants decomposition with regards to UV‐LED‐based AOPs. This review has provided vital information for future application, development, and customization of UV‐LED systems that can meet the food and water safety requirements and energy efficiency.
- 11 October 2020
- Published by Wiley in Comprehensive Reviews in Food Science and Food Safety
- Vol. 19 (6) , 3501-3527
Open AccessRecent advances on the application of UV‐LED technology for microbial inactivation: Progress and mechanism
Conventional technologies for the inactivation of microorganisms in food products have their limitations, especially changes in quality attributes that have led to quality deterioration, low consumer acceptance, impact on the environment, and potential health hazards (carcinogens). Ultraviolet (UV) light is an emerging promising nonthermal technology employed for microbial inactivation in water, liquid, and solid food products to curtail the limitations above. This review provides an insight into UV light‐emitting diodes (UV‐LEDs)' potential as an alternative to the traditional UV lamps for microbial inactivation in liquid and solid media. Also, the mechanisms of inactivation of lone and combined UVA‐, UVB‐, and UVC‐LEDs were discussed. The strategies utilized to improve the efficacy between the UV‐LED treatments at various wavelengths were summarized. Combining different UV‐LEDs treatments at different wavelengths have a synergistic effect and suppression of microbial cell reactivation. The UV‐LED‐based advanced oxidation processes (AOPs) also have high germicidal action against numerous microorganisms and are efficient for the degradation of micropollutants. Among the UV‐LEDs discussed, UVC‐LED has the most antimicrobial effect with the most efficient micropollutants decomposition with regards to UV‐LED‐based AOPs. This review has provided vital information for future application, development, and customization of UV‐LED systems that can meet the food and water safety requirements and energy efficiency.
- Open Access
- 9 September 2020
- Published by IntechOpen
Operation and Maintenance of Hydraulic Structures
Water is among the most valuable resources that nature has endowed to human beings. Water has cut across all spans of life from cradle to grave. Since time immemorial, man continuously developed methods and techniques to harness the benefits of water and as well to protect himself from the destruction that may be caused by the same water. Therefore, for a hydraulic structure to answer its name, it must be capable of being used smoothly for the purposes it was designed for and also be able to be controlled effectively without the risk of causing any havoc to the environment. Using water, especially for agricultural purposes, cannot be overemphasized. Hence, this chapter discusses the hydraulic structures based on the work they performed, challenges facing hydraulic structures, and management procedures of the hydraulic structures in order to adequately and efficiently serve their purpose.
- 9 September 2020
- Published by IntechOpen
Open AccessOperation and Maintenance of Hydraulic Structures
Water is among the most valuable resources that nature has endowed to human beings. Water has cut across all spans of life from cradle to grave. Since time immemorial, man continuously developed methods and techniques to harness the benefits of water and as well to protect himself from the destruction that may be caused by the same water. Therefore, for a hydraulic structure to answer its name, it must be capable of being used smoothly for the purposes it was designed for and also be able to be controlled effectively without the risk of causing any havoc to the environment. Using water, especially for agricultural purposes, cannot be overemphasized. Hence, this chapter discusses the hydraulic structures based on the work they performed, challenges facing hydraulic structures, and management procedures of the hydraulic structures in order to adequately and efficiently serve their purpose.