Katarzyna Gałczyńska

This study evaluated the properties of two commercial filaments intended for medical and sterile applications: PLACTIVE (Copper 3D, Santiago, Chile) and CPE ANTIBAC (Fiberlogy, Brzezie, Poland). The aim of the research was to compare the dimensional accuracy, repeatability of the fused deposition modeling (FDM) 3D printing process, and the antibacterial properties of the samples using standardized procedures. Four types of samples were manufactured: geometrically differentiated specimens for metrological measurements (S1); cylinders with a diameter of 15 mm and a height of 40 mm for assessing process repeatability (S2); rectangular specimens measuring 40 × 40 × 2 mm for surface topography analysis (S3); and rectangular samples measuring 20 × 20 × 2 mm for biocidal property evaluation (S4). The results demonstrated that PLACTIVE samples exhibited higher dimensional conformity with nominal values and lower variability of diameters than CPE ANTIBAC samples, which may be associated with greater process stability. For both materials, the PSm parameter was correlated with layer height only in the 90° printing orientation. Surface topography analysis showed that increasing the layer height from 0.08 mm to 0.20 mm led to a significant rise in Rsm, Ra, and Sa values, indicating deterioration in the reproduction of micro-irregularities and increased spatial differentiation of the surface. For PLACTIVE samples, a tendency toward more convex structures with positive Rsk values and moderate kurtosis (Rku) was observed, suggesting uniform plasticization and stable interlayer bonding, particularly at the 0° orientation. In contrast, CPE ANTIBAC samples (especially those printed at 90°) were characterized by higher Ra and Sa values and negative skewness (Rsk), indicating valley-dominated, sharper surface morphology resulting from different rheological behavior and faster solidification of the material. PLACTIVE samples did not exhibit antibacterial properties against Escherichia coli (E. coli), while for Staphylococcus aureus (S. aureus), the activity was independent of printing direction and layer height. The CPE ANTIBAC material showed antibacterial effects against both tested strains in approximately 50% of the samples. The findings provide insights into the relationships between material type, printing orientation, and process parameters in shaping the dimensional and biocidal properties of FDM filaments.

As a result of drug resistance, many antimicrobial medicines become ineffective, making the infections more difficult to treat. Therefore, there is a need to develop new compounds with antibacterial activity. This role may be played, for example, by metal complexes with carboxylic acids. This study reports the formation and characterization of ruthenium complexes with pyridazine-3-carboxylic acid (pdz-3-COOH)—([(η⁶-p-cym)Ru^IICl(pdz-3-COO)] (1), [Ru^IIICl₂(pdz-3-COO)₂Na(H₂O)]_n(H₂O)_0.11 (2) and [Ru^IIICl₂(pdz-3-COO)₂Na(H₂O)₂]_n (3). The synthesized compounds were analyzed using various spectroscopic and electrochemical techniques, with structure confirmation via SC-XRD analysis. Experimental data showed the ligand binds to metal ions bidentately through the nitrogen donor of the pyridazine ring and one carboxylate oxygen. To visualize intermolecular interactions, Hirshfeld surface analysis and 2D fingerprint plots were conducted. Furthermore, the impact of ruthenium compounds (1 and 2) on the planktonic growth of selected bacterial strains and the formation of Pseudomonas aeruginosa PAO1 biofilm was examined. Both complexes demonstrated comparable anti-biofilm activity and outperformed the free ligand. The effect of the complexes on selected virulence factors of P. aeruginosa PAO1 was also investigated. Compounds 1 and 2 show high suppressive activity in pyoverdine production, indicating that the virulence of the strain has been reduced. This inhibitory effect is similar to the inhibitory effect of ciprofloxacin. Within this context, the complexes exhibit promising antibacterial activities. Importantly, the compounds showed no cytotoxic effects on normal CHO-K1 cells. Additionally, a molecular docking approach and fluorescence spectroscopy were used to determine the interactions of ruthenium complexes with human serum albumin.

The photophysical and sensory properties of the donor–acceptor pyrazoloquinoline derivative (PQPc) were investigated using absorption, steady-state, and time-resolved fluorescence measurements. The compound synthesized from commercial, readily available substrates exhibited absorptions in the UV–Vis range, with a maximum of the longwave band around 390 nm. The maximum fluorescence was around 460–480 nm, depending on the solvent. The quantum yield was between 12.87% (for n-hexane) and 0.75% (for acetonitrile) and decreased with increasing solvent polarity. The PET mechanism was implicated as the cause of fluorescence quenching. Divalent ions such as Zn²⁺, Pb²⁺, Cd²⁺, Ca²⁺, Mg²⁺, Co²⁺, Ni²⁺, and Cu²⁺ were introduced to study the fluorescent response of PQPc. A 13-times increase in fluorescence quantum yield was observed after the addition of Zn²⁺ ions. Detailed research was carried out for the PQPc-Zn²⁺ system in order to check the possibility of analytical applications of PQPc as a fluorescent sensor. A detection limit of Zn²⁺ was set at the value level 1.93 × 10⁻⁷ M. PQPc-Zn²⁺ complexes had a stoichiometry of 1:1 with a binding constant of 859 M⁻¹. Biological studies showed that the sensor was localized in cells near the membrane and cytoplasm and may be used to detect zinc ions in eukaryotic cells.

Half-sandwich Ru(II) complexes belong to group of biologically active metallo-compounds with promising antimicrobial and anticancer activity. Herein, we report the synthesis and characterization of arene ruthenium complexes containing benzimidazole moiety, namely, [(η⁶-p-cymene)RuCl(bimCOO)] (1) and [(η⁶-p-cymene)RuCl₂(bim)] (2) (where bimCOO = benzimidazole-2-carboxylate and bim = 1-H-benzimidazole). The compounds were characterized by ¹H NMR, ¹³C NMR, IR, UV–vis and CV. Molecular structures of the complexes were determined by SC-XRD analysis, and the results indicated the presence of a pseudo-tetrahedral (piano stool) geometry. Interactions in the crystals of the Ru complexes using the Hirshfeld surface analysis were also examined. In addition, the biological studies of the complexes, such as antimicrobial assays (against planktonic and adherent microbes), cytotoxicity and lipophilicity, were performed. Antibacterial activity of the complexes was evaluated against S. aureus, E. coli, P. aeruginosa PAO1 and LES B58. Cytotoxic activity was tested against primary human fibroblasts and adenocarcinoma human alveolar basal epithelial cells. Obtained biological results show that the ruthenium compounds have bacteriostatic activity toward Pseudomonas aeruginosa PAO1 strain and are not toxic to normal cells. A molecular docking study was applied as a predictive source of information about the plausibility of examined structures binding with HSA as a transporting system.

Antimicrobial resistance is a growing public health concern that requires urgent action. Biofilm-associated resistance to antimicrobials begins at the attachment phase and increases as the biofilms maturate. Hence, interrupting the initial binding process of bacteria to surfaces is essential to effectively prevent biofilm-associated problems. Herein, we have evaluated the antibacterial and anti-biofilm activities of three ruthenium complexes in different oxidation states with 2-pyridin-2-yl-1H-benzimidazole (L₁ = 2,2′-PyBIm): [(η⁶-p-cymene)Ru^IIClL₁]PF₆ (Ru(II) complex), mer-[Ru^IIICl₃(CH₃CN)L₁]·L₁·3H₂O (Ru(III) complex), (H₂L₁)₂[Ru^IIICl₄(CH₃CN)₂]₂[Ru^IVCl₄(CH₃CN)₂]·2Cl·6H₂O (Ru(III/IV) complex). The biological activity of the compounds was screened against Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa strains. The results indicated that the anti-biofilm activity of the Ru complexes at concentration of 1 mM was better than that of the ligand alone against the P. aeruginosa PAO1. It means that ligand, in combination with ruthenium ion, shows a synergistic effect. The effect of the Ru complexes on cell surface properties was determined by the contact angle and zeta potential values. The electric and physical properties of the microbial surface are useful tools for the examined aggregation phenomenon and disruption of the adhesion. Considering that intermolecular interactions are important and largely define the functions of compounds, we examined interactions in the crystals of the Ru complexes using the Hirshfeld surface analysis.

The constantly growing resistance of bacteria to antibiotics and other antibacterial substances has led us to an era in which alternative antimicrobial therapies are urgently required. One promising approach is to target bacterial pathogens using metal complexes. Therefore, we investigated the possibility of utilizing series of manganese(II) complexes with heteroaromatic ligands: Alcohol, aldehyde, ketone, and carboxylic acid as inhibitors for biofilm formation of Pseudomonas aeruginosa. To complete the series mentioned above, Mn-dipyCO-NO₃ with dipyridin-2-ylmethanone (dipyCO) was isolated, and then structurally (single-crystal X-ray analysis) and physicochemically characterized (FT-IR, TG, CV, magnetic susceptibility). The antibacterial activity of the compounds against representative Gram-negative and Gram-positive bacteria was also evaluated. It is worth highlighting that the results of the cytotoxicity assays performed (MTT, DHI HoloMonitorM4) indicate high cell viability of the human fibroblast (VH10) in the presence of the Mn(II) complexes. Additionally, the inhibition effect of catalase activity by the complexes was studied. This paper focused on such aspects as studying different types of intermolecular interactions in the crystals of the Mn(II) complexes as well as their possible effect on anti-biofilm activity, the structure–activity relationship of the Mn(II) complexes, and regularity between the electrochemical properties of the Mn(II) complexes and anti-biofilm activity.

The study of drugs diffusion through different biological membranes constitutes an essential step in the development of new pharmaceuticals. In this study, the method based on the monolayer cell culture of CHO-K1 cells has been developed in order to emulate the epithelial cells barrier in permeability studies by laser interferometry. Laser interferometry was employed for the experimental analysis of nickel(II) and cobalt(II) complexes with 1-allylimidazole or their chlorides’ diffusion through eukaryotic cell monolayers. The amount (mol) of nickel(II) and cobalt(II) chlorides transported through the monolayer was greater than that of metals complexed with 1-allylimidazole by 4.34-fold and 1.45-fold, respectively, after 60 min. Thus, laser interferometry can be used for the quantitative analysis of the transport of compounds through eukaryotic cell monolayers, and the resulting parameters can be used to formulate a mathematical description of this process.

The microscopic alga Coccomyxa subglobosa, collected from the Głowoniowa Nyża Cave (Tatra Mountains, Poland), is a source of fatty acids (FAs) that could be used for biodiesel production. FAs from subaerial algae have unlimited availability because of the ubiquity of algae in nature. Algal culture was carried out under laboratory conditions and algal biomass was measured during growth phase, resulting in 5 g of dry weight (32% oil). The fatty acid methyl ester (FAME) profile was analyzed by means of gas chromatography–mass spectrometry (GC–MS). The presence of lipids and chloroplasts in C. subglobosa was demonstrated using GC–MS and confocal laser microscopy. Naturally occurring FAMEs contained C₁₂–C₂₄ compounds, and methyl palmitate (28.5%) and methyl stearate (45%) were the predominant lipid species. Aerophytic algae could be an important component of biodiesel production, as they are omnipresent and environmentally friendly, contain more methyl esters than seaweed, and can be easily produced on a large scale.