DRDeok-Ho Roh

Deok-Ho Roh

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Deok-Ho Roh has a total of 76 co-authors. Here are the top co-authors by number of shared publications:

  • Tae-Hyuk Kwon

    Ulsan National Institute of Science and Technology

    14 shared publications
  • Byung-Man Kim

    Department of Chemistry, Ulsan National Institute of Science & Technology, Ulsan 44919, Korea

    4 shared publications
  • Jeong Soo Kim

    Department of Chemistry, Ulsan National Institute of Science & Technology, Ulsan 44919, Korea

    4 shared publications
  • HyeonOh Shin

    Department of Chemistry and Center for Wave Energy Materials, Ulsan National Institute of Science and Technology (UNIST), Ulsan 44919, Republic of Korea

    3 shared publications
  • HyeonOh Shin

    Department of Chemistry School of Natural Science Ulsan National Institute of Science and Technology (UNIST) Ulsan 44919 Republic of Korea

    3 shared publications
  • Jun-Hyeok Park

    Department of Chemistry, Ulsan National Institute of Science and Technology, Ulsan 44919, Republic of Korea

    3 shared publications

Latest Publications

  • Open Access

    Redox‐Mediated Electrochemical Regeneration of Spent LiFePO 4 Battery Cathodes

    by Deok‐Ho Roh, Dayun Jung, James B. Gerken, Jesse J. Martinez, Eric Kazyak, Shannon S. Stahl

    Direct recycling of lithium‐ion battery cathodes offers considerable appeal over metallurgical approaches. Here, we demonstrate a mediated electrochemical method for direct regeneration of degraded LiFePO 4 (LFP). The approach uses a redox mediator, iron propylenediamine tetraacetate, that undergoes electrochemical reduction and is circulated through an external reservoir, where it supplies the electrons needed to regenerate LFP in the presence of Li + ions derived from LiOH oxidation. Rapid outer‐sphere electron transfer is observed from the mediator to the degraded LFP material. This feature, together with good aqueous solubility of the mediator (0.3 M), supports current densities up to 100 mA/cm 2 , and this electrochemical recycling process is demonstrated on 100 g scale. 57 Fe Mössbauer spectroscopy is used to monitor the correction of structural defects in the degraded LFP, providing the basis for regeneration of LFP that matches the electrochemical performance of pristine LFP.

  • Open Access

    Redox‐Mediated Electrochemical Regeneration of Spent LiFePO 4 Battery Cathodes

    by Deok‐Ho Roh, Dayun Jung, James B. Gerken, Jesse J. Martinez, Eric Kazyak, Shannon S. Stahl

    Direct recycling of lithium‐ion battery cathodes offers considerable appeal over metallurgical approaches. Here, we demonstrate a mediated electrochemical method for direct regeneration of degraded LiFePO 4 (LFP). The approach uses a redox mediator, iron propylenediamine tetraacetate, that undergoes electrochemical reduction and is circulated through an external reservoir, where it supplies the electrons needed to regenerate LFP in the presence of Li + ions derived from LiOH oxidation. Rapid outer‐sphere electron transfer is observed from the mediator to the degraded LFP material. This feature, together with good aqueous solubility of the mediator (0.3 M), supports current densities up to 100 mA/cm 2 , and this electrochemical recycling process is demonstrated on 100 g scale. 57 Fe Mössbauer spectroscopy is used to monitor the correction of structural defects in the degraded LFP, providing the basis for regeneration of LFP that matches the electrochemical performance of pristine LFP.


  • Improving the Conductivity and Stability of Silver Nanowires Through Spontaneous Ligand Exchange for Joule Heating

    by Junhyeok Kwon, Joon‐Young Soh, HyeonOh Shin, Sungjun Lim, So Yeon Yoon, Wang‐Hyo Kim, Deok‐Ho Roh, Moosung Choi, Sang‐Won Park, EunAe Cho, et al.

    Silver nanowires (AgNWs) are promising materials for optoelectronic devices, owing to their high transparency and conductivity. However, their performance is limited by polyvinylpyrrolidone (PVP) as an insulating capping agent that is essential for the synthesis of AgNWs but increases their intrinsic resistance. Herein, we introduce a facile spin‐coating ligand exchange strategy that considers the physicochemical properties of ligands, including PVP solubility, viscosity, volatility, and hydrogen‐bonding ability, to achieve a stable adsorption and efficient exchange. Among the tested ligands, ethylene glycol (EG) ligand effectively reduces the intrinsic resistance and enhances the optoelectronic properties of AgNWs by spontaneously replacing PVP and forming a stable EG⋯PVP hydrogen‐bonded complex, as confirmed by multiple analysis methods. The ligand exchanged AgNWs electrode (AgNWs‐EG) improves both in‐plane and out‐of‐plane carrier transport properties as well as stability. Leveraging these properties, AgNWs‐EG exhibits a 35% increase in Joule heating performance compared to the pristine AgNWs electrode and remarkable stability at elevated temperatures around 120 °C. Moreover, the performance of AgNWs‐EG can be further enhanced through their combination with MXene.

  • Improving the Conductivity and Stability of Silver Nanowires Through Spontaneous Ligand Exchange for Joule Heating

    by Junhyeok Kwon, Joon‐Young Soh, HyeonOh Shin, Sungjun Lim, So Yeon Yoon, Wang‐Hyo Kim, Deok‐Ho Roh, Moosung Choi, Sang‐Won Park, EunAe Cho, et al.

    Silver nanowires (AgNWs) are promising materials for optoelectronic devices, owing to their high transparency and conductivity. However, their performance is limited by polyvinylpyrrolidone (PVP) as an insulating capping agent that is essential for the synthesis of AgNWs but increases their intrinsic resistance. Herein, we introduce a facile spin‐coating ligand exchange strategy that considers the physicochemical properties of ligands, including PVP solubility, viscosity, volatility, and hydrogen‐bonding ability, to achieve a stable adsorption and efficient exchange. Among the tested ligands, ethylene glycol (EG) ligand effectively reduces the intrinsic resistance and enhances the optoelectronic properties of AgNWs by spontaneously replacing PVP and forming a stable EG⋯PVP hydrogen‐bonded complex, as confirmed by multiple analysis methods. The ligand exchanged AgNWs electrode (AgNWs‐EG) improves both in‐plane and out‐of‐plane carrier transport properties as well as stability. Leveraging these properties, AgNWs‐EG exhibits a 35% increase in Joule heating performance compared to the pristine AgNWs electrode and remarkable stability at elevated temperatures around 120 °C. Moreover, the performance of AgNWs‐EG can be further enhanced through their combination with MXene.


  • Deep metal-assisted chemical etching using a porous monolithic AgAu layer to develop neutral-colored transparent silicon photovoltaics

    by HyeonOh Shin, Kangmin Lee, Jinhong Mun, Deok-Ho Roh, Eunhye Hwang, Jeonghwan Park, Geunsik Lee, Kwanyong Seo, Tae-Hyuk Kwon

    Here, we report deep metal-assisted chemical etching (MACE) using a porous monolithic AgAu layer on crystalline silicon (c-Si) as an alternative to the expensive deep reactive ion etching (DRIE) for fabricating neutral-colored transparent crystalline silicon photovoltaics (c-Si TPV). To prevent the uneven etching of c-Si by Ag particles, a porous monolithic Ag layer is developed by introducing acetonitrile to enhance the interaction between the c-Si surface and Ag precursor. This results in cooperative motion during MACE, as confirmed by microscopic observation, surface area measurements, and computational simulations. The durability of this Ag catalyst can be further improved by passivation with Au via galvanic replacement (i.e., the porous monolithic AgAu layer), thereby preventing indiscriminate defect generation. Thus, the fabricated c-Si TPV using MACE and a porous monolithic AgAu layer exhibits a high performance of 13.0% with 20% neutral-colored transparency, representing results superior to those obtained with samples fabricated by DRIE (11.5%).


  • Open Access

    Singlet Oxygen Generation from Polyaminoglycerol by Spin-Flip-Based Electron Transfer

    by Jung Seung Nam, Youngjoo Hong, Chae Gyu Lee, Tae In Kim, Chaiheon Lee, Deok-Ho Roh, In Seong Lee, Songa Kweon, Gyunhyeok Ahn, Seung Kyu Min, et al.

    Reactive oxygen species have drawn attention owing to their strong oxidation ability. In particular, the singlet oxygen (1O2) produced by energy transfer is the predominant species for controlling oxidation reactions efficiently. However, conventional 1O2 generators, which rely on enhanced energy transfer, frequently suffer from poor solubility, low stability, and low biocompatibility. Herein, we introduce a hyperbranched aliphatic polyaminoglycerol (hPAG) as a 1O2 generator, which relies on spin-flip-based electron transfer. The coexistence of a lone pair electron on the nitrogen atom and a hydrogen-bonding donor (the protonated form of nitrogen and hydroxyl group) affords proximity between hPAG and O2. Subsequent direct electron transfer after photo-irradiation induces hPAG•+-O2•– formation, and the following spin-flip process generates 1O2. The spin-flip-based electron transfer pathway is analyzed by a series of photophysical, electrochemical, and computational studies. The 1O2 generator, hPAG, is successfully employed in photodynamic therapy and as an antimicrobial reagent.


  • Sono-Cavitation and Nebulization-Based Synthesis of Conjugated Microporous Polymers for Energy Storage Applications

    by Deok-Ho Roh, HyeonOh Shin, Hyun-Tak Kim, Tae-Hyuk Kwon

    Conjugated microporous polymers (CMPs) are promising energy storage materials owing to their rigid and cross-linked microporous structures. However, the fabrication of nano- and microstructured CMP films for practical applications is currently limited by processing challenges. Herein, we report that combined sono-cavitation and nebulization synthesis (SNS) is an effective method for the synthesis of CMP films from a monomer precursor solution. Using the SNS, the scalable fabrication of microporous and redox-active CMP films can be achieved via the oxidative C–C coupling polymerization of the monomer precursor. Intriguingly, the ultrasonic frequency used during SNS strongly affects the synthesis of the CMP films, resulting in an approximately 30% improvement in reaction yields and ca. 1.3–1.7-times enhanced surface areas (336–542 m2/g) at a high ultrasonic frequency of 180 kHz compared to those at 120 kHz. Furthermore, we prepare highly conductive, three-dimensional porous electrodes [CMP/carbon nanotube (CNT)] by a layer-by-layer sequential deposition of CMP films and CNTs via SNS. Finally, an asymmetric supercapacitor comprising the CMP/CNT cathode and carbon anode shows a high specific capacitance of 477 F/g at 1 A/g with a wide working potential window (0–1.4 V) and robust cycling stability, exhibiting 94.4% retention after 10,000 cycles.


  • Dual-Functional Electrolyte Additives toward Long-Cycling Lithium-Ion Batteries: Ecofriendly Designed Carbonate Derivatives

    by Jung-Gu Han, Eunbyul Hwang, Yoseph Kim, Sewon Park, Koeun Kim, Deok-Ho Roh, Minsu Gu, Sang-Ho Lee, Tae-Hyuk Kwon, Youngjo Kim, et al.

    Long-term stability of the solid electrolyte interphase (SEI) and cathode-electrolyte interface (CEI) layers formed on anodes and cathodes is imperative to mitigate the interfacial degradation of electrodes and enhance the cycle life of lithium-ion batteries (LIBs). However, the SEI on the anode and CEI on the cathode are vulnerable to the reactive species of PF5 and HF produced by the decomposition and hydrolysis of the conventional LiPF6 electrolyte in a battery inevitably containing a trace amount of water. Here, we report a new class of cyclic carbonate-based electrolyte additives to preserve the integrity of the SEI and CEI in LIBs. This new class of additives is designed and synthesized by an ecofriendly approach which involves fixing CO2 with functional epoxides bearing various reactive side chains. It was found that the cyclic carbonates of 3-(1-ethoxyethoxy)-1,2-propylene carbonate (EEPC) and 3-trimethoxysilyl propyloxy-1,2-propylene carbonate (TMSPC), possessing high capability for the stabilization of Lewis-acidic PF5, exhibit a capacity retention of 79.0% after 1000 cycles, which is superior to that of the pristine electrolyte of 54.7%. Moreover, TMSPC has HF scavenging capability, which, along with PF5 stabilization, results in enhanced rate capability of commercial LiNi0.6Mn0.2Co0.2O2 (NCM622)/graphite full cells, posing a significant potential for high-energy density LIBs with long cycle stability.


  • Indoor-light-energy-harvesting dye-sensitized photo-rechargeable battery

    by Byung-Man Kim, Myeong-Hee Lee, Vijayan Sobhana Dilimon, Jeong Soo Kim, Jung Seung Nam, Yoon-Gyo Cho, Hyun Kuk Noh, Deok-Ho Roh, Tae-Hyuk Kwon, Hyun-Kon Song

    Photo-rechargeable batteries (PRBs) benefit from their bifunctionality covering energy harvesting and storage. However, dim-light performances of the PRBs for indoor applications have not been reported. Herein, we present an external-power-free single-structured PRB named a dye-sensitized photo-rechargeable battery (DSPB) with an outstanding light-to-charge energy efficiency (ηoverall) of 11.5% under the dim light condition. This unprecedented ηoverall was attributed to the thermodynamically-favorable design of the DSPB that maximizes the working potential. At high-power irradiation, the kinetically-fast but thermodynamically-unfavorable iodine mediator (I−/I3 −) showed the highest charge and discharge capacities even if its discharge voltage was lowest. Under dim-light for indoor applications, however, the thermodynamically-favorable but kinetically-slow copper complex mediator (Cu+/2+(dmp)2) showed energy density and efficiency superior to I−/I3 − because its kinetics did not limit the harvesting capacity. The successful demonstration of the ability of the DSPB to operate a temperature-sensing IoT device only by indoor light opens the possibility of realizing indoor-light-harvesting PRBs.


  • Molecular Design Strategy toward Robust Organic Dyes in Thin-Film Photoanodes

    by Jun-Hyeok Park, Un-Young Kim, Byung-Man Kim, Wang-Hyo Kim, Deok-Ho Roh, Jeong Soo Kim, Tae-Hyuk Kwon