Weronika Zaperty
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Weronika Zaperty has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Tomasz Kozacki
Warsaw University of Technology
20 shared publications - Malgorzata Kujawinska
Warsaw University of Technology, Institute of Micromechanics and Photonics
14 shared publications Grzegorz Finke
Warsaw Univ. of Technology (Poland)
5 shared publicationsMaksymilian Chlipała
Warsaw Univ. of Technology (Poland)
3 shared publications- Piotr L. Makowski
Institute of Micromechanics and Photonics, Warsaw University of Technology, 8 Sw. A. Boboli St., 02-525 Warsaw, Poland
3 shared publications Piotr Makowski
Warsaw Univ. of Technology (Poland)
3 shared publications
Latest Publications
- 7 September 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10834, 108342A
Numerical model of diffraction effects of pixelated phase-only spatial light modulators
In this work, we investigate numerical models of selected spatial light modulators (SLMs) to provide an accurate simulation of diffractive effects present in optoelectronic hologram reconstruction, i.e. DC term and higher orders. We focus on reported most influential parameters: (a) fill factor, (b) amplitude modulation of dead space (effect of surface structure between adjacent pixels), (c) phase of dead space (phase modulation profile between adjacent pixels), (d) spatial influence of adjacent pixels on phase modulation value, and (e) number of phase quantization levels. The impact of each factor on modeled diffraction efficiency and orders distribution is investigated. We consider phase-only reflective models of LCoS SLMs on the basis of commercially available architectures. Additionally, the pixelated SLM model is tested on the example of two practical cases.
- 7 September 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10834, 108342A
Numerical model of diffraction effects of pixelated phase-only spatial light modulators
In this work, we investigate numerical models of selected spatial light modulators (SLMs) to provide an accurate simulation of diffractive effects present in optoelectronic hologram reconstruction, i.e. DC term and higher orders. We focus on reported most influential parameters: (a) fill factor, (b) amplitude modulation of dead space (effect of surface structure between adjacent pixels), (c) phase of dead space (phase modulation profile between adjacent pixels), (d) spatial influence of adjacent pixels on phase modulation value, and (e) number of phase quantization levels. The impact of each factor on modeled diffraction efficiency and orders distribution is investigated. We consider phase-only reflective models of LCoS SLMs on the basis of commercially available architectures. Additionally, the pixelated SLM model is tested on the example of two practical cases.
- 7 September 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10834, 124
Full and horizontal parallax Fourier holography with laser capture and LED display
The digital holography and holographic display constitute the best framework of 3D imaging as they aim to recreate the complete optical field emitted by a recorded scene. In this paper, we present two techniques of Fourier holographic imaging of real world objects. The first solution is an end-to-end full color Fourier holographic imaging approach, which involves standard RGB holographic recording an LED-driven viewing window display. It gives possibility of almost undistorted orthoscopic reconstruction of large real objects. Second architecture uses the same digital holographic content and horizontal parallax rainbow holographic display, which has reduced space bandwidth product requirements.
- 7 September 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10834, 124
Full and horizontal parallax Fourier holography with laser capture and LED display
The digital holography and holographic display constitute the best framework of 3D imaging as they aim to recreate the complete optical field emitted by a recorded scene. In this paper, we present two techniques of Fourier holographic imaging of real world objects. The first solution is an end-to-end full color Fourier holographic imaging approach, which involves standard RGB holographic recording an LED-driven viewing window display. It gives possibility of almost undistorted orthoscopic reconstruction of large real objects. Second architecture uses the same digital holographic content and horizontal parallax rainbow holographic display, which has reduced space bandwidth product requirements.
- 15 November 2017
- Published by Optica Publishing Group in Applied Optics
- Vol. 57 (1) , A76-A85
Digital hologram transformations for RGB color holographic display with independent image magnification and translation in 3D
A new framework for in-plane transformations of digital holograms (DHs) is proposed, which provides improved control over basic geometrical features of holographic images reconstructed optically in full color. The method is based on a Fourier hologram equivalent of the adaptive affine transformation technique [Opt. Express 18, 8806 (2010) [CrossRef] ]. The solution includes four elementary geometrical transformations that can be performed independently on a full-color 3D image reconstructed from an RGB hologram: (i) transverse magnification; (ii) axial translation with minimized distortion; (iii) transverse translation; and (iv) viewing angle rotation. The independent character of transformations (i) and (ii) constitutes the main result of the work and plays a double role: (1) it simplifies synchronization of color components of the RGB image in the presence of mismatch between capture and display parameters; (2) provides improved control over position and size of the projected image, particularly the axial position, which opens new possibilities for efficient animation of holographic content. The approximate character of the operations (i) and (ii) is examined both analytically and experimentally using an RGB circular holographic display system. Additionally, a complex animation built from a single wide-aperture RGB Fourier hologram is presented to demonstrate full capabilities of the developed toolset.
- 15 November 2017
- Published by Optica Publishing Group in Applied Optics
- Vol. 57 (1) , A76-A85
Digital hologram transformations for RGB color holographic display with independent image magnification and translation in 3D
A new framework for in-plane transformations of digital holograms (DHs) is proposed, which provides improved control over basic geometrical features of holographic images reconstructed optically in full color. The method is based on a Fourier hologram equivalent of the adaptive affine transformation technique [Opt. Express 18, 8806 (2010) [CrossRef] ]. The solution includes four elementary geometrical transformations that can be performed independently on a full-color 3D image reconstructed from an RGB hologram: (i) transverse magnification; (ii) axial translation with minimized distortion; (iii) transverse translation; and (iv) viewing angle rotation. The independent character of transformations (i) and (ii) constitutes the main result of the work and plays a double role: (1) it simplifies synchronization of color components of the RGB image in the presence of mismatch between capture and display parameters; (2) provides improved control over position and size of the projected image, particularly the axial position, which opens new possibilities for efficient animation of holographic content. The approximate character of the operations (i) and (ii) is examined both analytically and experimentally using an RGB circular holographic display system. Additionally, a complex animation built from a single wide-aperture RGB Fourier hologram is presented to demonstrate full capabilities of the developed toolset.
- 27 September 2017
- Published by Optica Publishing Group in Optics Letters
- Vol. 42 (19) , 3932-3935
Orthoscopic real-image display of digital holograms
We present a practical solution for the long-standing problem of depth inversion in real-image holographic display of digital holograms. It relies on a field lens inserted in front of the spatial light modulator device addressed by a properly processed hologram. The processing algorithm accounts for pixel size and wavelength mismatch between capture and display devices in a way that prevents image deformation. Complete images of large dimensions are observable from one position with a naked eye. We demonstrate the method experimentally on a 10-cm-long 3D object using a single full-HD spatial light modulator, but it can supplement most holographic displays designed to form a real image, including circular wide angle configurations.
- 27 September 2017
- Published by Optica Publishing Group in Optics Letters
- Vol. 42 (19) , 3932-3935
Orthoscopic real-image display of digital holograms
We present a practical solution for the long-standing problem of depth inversion in real-image holographic display of digital holograms. It relies on a field lens inserted in front of the spatial light modulator device addressed by a properly processed hologram. The processing algorithm accounts for pixel size and wavelength mismatch between capture and display devices in a way that prevents image deformation. Complete images of large dimensions are observable from one position with a naked eye. We demonstrate the method experimentally on a 10-cm-long 3D object using a single full-HD spatial light modulator, but it can supplement most holographic displays designed to form a real image, including circular wide angle configurations.
- 1 January 2017
- Published by Optica Publishing Group
- p. FTu4C.3
Multi-SLM Color Holographic 3D Display of Real-world Holographic Content with Numerical Data Adaptation
We present color holographic imaging system, which data capture and reconstruction processes are characterized by different parameters. Necessary holographic content adaptation is performed numerically on the Fourier hologram basis.
- 1 January 2017
- Published by Optica Publishing Group
- p. FTu4C.3
Multi-SLM Color Holographic 3D Display of Real-world Holographic Content with Numerical Data Adaptation
We present color holographic imaging system, which data capture and reconstruction processes are characterized by different parameters. Necessary holographic content adaptation is performed numerically on the Fourier hologram basis.
- 6 October 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Display Technology
- Vol. 12 (1551319X) , 1
Multi-SLM color holographic 3D display based on RGB spatial filter
A novel approach for color holographic 3D displays employing several liquid crystal based spatial light modulators (SLM) is presented. A multicolor reconstruction is introduced into circular monochrome display architecture with horizontal-only-parallax through the use of space-division method (SDM). In the SDM active area of an SLM is divided into three regions generating the RGB component images by using color spatial filter composed of a three glass stripes that are attached to the front of each SLM. Relatively low complexity level of SDM enables to upgrade a horizontal-only-parallax monochrome display to a color one at the expense of image resolution. There is no reduction of remaining key performance parameters, i.e., image dimensions, refresh frame rate, and viewing angle are preserved with no increase of SLM number. In this paper, practical aspects of color imaging implementation, including filter mask design and hardware calibration, are considered. Developed procedures focus on major three effects, i.e., spectral calibration of response of highly dispersive SLM phase, spatial calibration of filter mask and numerical alignment of RGB imaging volumes. The presented experimental results of static and dynamic 3D reconstructions of computer generated holograms validate the performance of calibration procedures and the high color imaging quality of the display.
- 6 October 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Display Technology
- Vol. 12 (1551319X) , 1
Multi-SLM color holographic 3D display based on RGB spatial filter
A novel approach for color holographic 3D displays employing several liquid crystal based spatial light modulators (SLM) is presented. A multicolor reconstruction is introduced into circular monochrome display architecture with horizontal-only-parallax through the use of space-division method (SDM). In the SDM active area of an SLM is divided into three regions generating the RGB component images by using color spatial filter composed of a three glass stripes that are attached to the front of each SLM. Relatively low complexity level of SDM enables to upgrade a horizontal-only-parallax monochrome display to a color one at the expense of image resolution. There is no reduction of remaining key performance parameters, i.e., image dimensions, refresh frame rate, and viewing angle are preserved with no increase of SLM number. In this paper, practical aspects of color imaging implementation, including filter mask design and hardware calibration, are considered. Developed procedures focus on major three effects, i.e., spectral calibration of response of highly dispersive SLM phase, spatial calibration of filter mask and numerical alignment of RGB imaging volumes. The presented experimental results of static and dynamic 3D reconstructions of computer generated holograms validate the performance of calibration procedures and the high color imaging quality of the display.
- 28 September 2016
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10031, 1003117-1003117-8
RGB imaging volumes alignment method for color holographic displays
- 28 September 2016
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10031, 1003117-1003117-8
RGB imaging volumes alignment method for color holographic displays
- 14 September 2016
- Published by SPIE-Intl Soc Optical Eng
- Vol. 9970, 99701E-99701E-10
Fourier RGB synthetic aperture color holographic capture for wide angle holographic display
- 14 September 2016
- Published by SPIE-Intl Soc Optical Eng
- Vol. 9970, 99701E-99701E-10
Fourier RGB synthetic aperture color holographic capture for wide angle holographic display
- 1 January 2016
- Published by Polish Academy of Sciences Chancellery in Opto-Electronics Review
- Vol. 24 (3)
Spatiotemporal multiplexing method for visual field of view extension in holographic displays with naked eye observation
In this paper we propose a method which allows to overcome the basic functional problems in holographic displays with naked eye observation caused by delivering too small images visible in narrow viewing angles. The solution is based on combining the spatiotemporal multiplexing method with a 4f optical system. It enables to increase an aperture of a holographic display and extend the angular visual field of view. The applicability of the modified display is evidenced by Wigner distribution analysis of holographic imaging with spatiotemporal multiplexing method and by the experiments performed at the display demonstrator.
- 1 January 2016
- Published by Polish Academy of Sciences Chancellery in Opto-Electronics Review
- Vol. 24 (3)
Spatiotemporal multiplexing method for visual field of view extension in holographic displays with naked eye observation
In this paper we propose a method which allows to overcome the basic functional problems in holographic displays with naked eye observation caused by delivering too small images visible in narrow viewing angles. The solution is based on combining the spatiotemporal multiplexing method with a 4f optical system. It enables to increase an aperture of a holographic display and extend the angular visual field of view. The applicability of the modified display is evidenced by Wigner distribution analysis of holographic imaging with spatiotemporal multiplexing method and by the experiments performed at the display demonstrator.
- 1 January 2016
- Published by Optica Publishing Group
- p. DM4E.5
Color reconstructions of real digital holograms in holographic display with white light LED illumination
In this work we investigate the possibility of color reconstructions of digital holograms in holographic display with a white light LED source. The capture system uses RGB laser light and is designed in the Fourier synthetic aperture configuration. The display system uses the LED source and Fresnel configuration with complex coding scheme.
- 1 January 2016
- Published by Optica Publishing Group
- p. DM4E.5
Color reconstructions of real digital holograms in holographic display with white light LED illumination
In this work we investigate the possibility of color reconstructions of digital holograms in holographic display with a white light LED source. The capture system uses RGB laser light and is designed in the Fourier synthetic aperture configuration. The display system uses the LED source and Fresnel configuration with complex coding scheme.