Dhoumendra Mandal
Dhoumendra Mandal has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Mrinal Kanti Mandal
Department of Physics , National Institute of Technology Durgapur , Durgapur , India
9 shared publications Sumana Mandal
NIT Durgapur, Department of Physics, Durgapur, West Bengal
9 shared publicationsSisir Kumar Garai
M.U.C. Women’s College, Burdwan, West Bengal, India
7 shared publications- Sisir Kumar Garai
M.U.C Women’s College, Burdwan, India
4 shared publications - Manas Kumar Garai
NIT, Durgapur, India
2 shared publications Sisir K. Garai
M.U.C women's College, India
2 shared publications
Latest Publications
- 4 March 2024
- Published by Springer Nature in Journal of Optics
- Vol. 53 (5) , 4671-4689
Design of optically controlled read and write memory unit with reversible logic gates using GaAs–AlGaAs-based micro-ring resonators
- 4 March 2024
- Published by Springer Nature in Journal of Optics
- Vol. 53 (5) , 4671-4689
Design of optically controlled read and write memory unit with reversible logic gates using GaAs–AlGaAs-based micro-ring resonators
- 1 November 2023
- Published by Springer Nature in Journal of Optics
- Vol. 53 (3) , 2504-2517
An alternative approach to design a frequency encoded 3-bit synchronous counter using semiconductor optical amplifier-based polarization switch
- 1 November 2023
- Published by Springer Nature in Journal of Optics
- Vol. 53 (3) , 2504-2517
An alternative approach to design a frequency encoded 3-bit synchronous counter using semiconductor optical amplifier-based polarization switch
- 1 December 2022
- Published by SPIE-Intl Soc Optical Eng in Optical Engineering
- Vol. 61 (12) , 126102-23
Optical scheme of developing Hamming code-based error detection and correction using Toffoli gates with frequency encoded data
Bit-error detection and correction is a very important part of a data communication network. In this article, we propose an optical approach to designing an error detection and correction circuit using Hamming code-based frequency encoded binary data and Toffoli gates. Here, the Toffoli gates are made of semiconductor optical amplifiers (SOAs) that work based on the nonlinear polarization rotation property. The characteristics of SOA, including very fast switching action (about 0.01 ns), low power consumption, frequency independent cross-polarization gain in the C-band, cascading property, etc., make the scheme attractive. The frequency encoded data-based proposed scheme will be effective for WDM communication networks. MATLAB simulation results testify to the feasibility of the proposed scheme.
- 1 December 2022
- Published by SPIE-Intl Soc Optical Eng in Optical Engineering
- Vol. 61 (12) , 126102-23
Optical scheme of developing Hamming code-based error detection and correction using Toffoli gates with frequency encoded data
Bit-error detection and correction is a very important part of a data communication network. In this article, we propose an optical approach to designing an error detection and correction circuit using Hamming code-based frequency encoded binary data and Toffoli gates. Here, the Toffoli gates are made of semiconductor optical amplifiers (SOAs) that work based on the nonlinear polarization rotation property. The characteristics of SOA, including very fast switching action (about 0.01 ns), low power consumption, frequency independent cross-polarization gain in the C-band, cascading property, etc., make the scheme attractive. The frequency encoded data-based proposed scheme will be effective for WDM communication networks. MATLAB simulation results testify to the feasibility of the proposed scheme.
- 21 January 2019
- Published by SPIE-Intl Soc Optical Eng in Optical Engineering
- Vol. 58 (01) , 015104-23
Theoretical approach of developing a frequency-encoded reversible optical arithmetic and logic unit using semiconductor optical amplifier-based polarization switches
The reversible logic gate is a great choice for designing various types of optical processors due to so many advantageous aspects of it; such as low power consumption and the ability of data recovery. At first, the optical circuit of Fredkin gate, a universal reversible logic gate, is designed theoretically using a semiconductor optical amplifier (SOA)-based polarization switch, and the performance of the circuit is studied using simulated results. The frequency-encoded binary data are used to execute the operations. Subsequently, we propose the techniques of developing NOT, AND, OR, EX-OR, EX-NOR gates, and full adder circuit using reversible Fredkin gates. Finally, we develop an optical arithmetic logic unit using the proper combination of reversible Fredkin gates. The theory of nonlinear polarization rotation of the probe beam in the presence of the pump beam in SOA is adopted here. The simulated input–output spectra of the optical circuits enhance the admissibility of the proposed concept.
- 21 January 2019
- Published by SPIE-Intl Soc Optical Eng in Optical Engineering
- Vol. 58 (01) , 015104-23
Theoretical approach of developing a frequency-encoded reversible optical arithmetic and logic unit using semiconductor optical amplifier-based polarization switches
The reversible logic gate is a great choice for designing various types of optical processors due to so many advantageous aspects of it; such as low power consumption and the ability of data recovery. At first, the optical circuit of Fredkin gate, a universal reversible logic gate, is designed theoretically using a semiconductor optical amplifier (SOA)-based polarization switch, and the performance of the circuit is studied using simulated results. The frequency-encoded binary data are used to execute the operations. Subsequently, we propose the techniques of developing NOT, AND, OR, EX-OR, EX-NOR gates, and full adder circuit using reversible Fredkin gates. Finally, we develop an optical arithmetic logic unit using the proper combination of reversible Fredkin gates. The theory of nonlinear polarization rotation of the probe beam in the presence of the pump beam in SOA is adopted here. The simulated input–output spectra of the optical circuits enhance the admissibility of the proposed concept.
- Open Access
- 10 May 2018
- Published by Wiley in International Journal of Optics
- Vol. 2018, 1-13
Alternative Approach of Developing Optical Binary Adder Using Reversible Peres Gates
All-optical devices will play a very significant and crucial role in the modern all-optical network by eliminating the bottleneck of opto-electro-opto- (O-E-O-) conversion. Unfortunately, the conventional logic gates lose information at the output, and the states of the outputs cannot give any credible impressions of the states of the inputs. In this article, at first, the authors have proposed a method of designing an optical three-input-three-output reversible Peres gate. Authors have deployed polarization switching characteristic of Semiconductor Optical Amplifier (SOA) for designing this circuit. The authors have also proposed a method of designing an optical reversible full adder, using two such Peres gates and subsequently a data recovery circuit which can recover the input data of the adder. The authors have chosen frequency encoded data for processing the operation. The proposed scheme has been verified by simulation results.
- 10 May 2018
- Published by Wiley in International Journal of Optics
- Vol. 2018, 1-13
Open AccessAlternative Approach of Developing Optical Binary Adder Using Reversible Peres Gates
All-optical devices will play a very significant and crucial role in the modern all-optical network by eliminating the bottleneck of opto-electro-opto- (O-E-O-) conversion. Unfortunately, the conventional logic gates lose information at the output, and the states of the outputs cannot give any credible impressions of the states of the inputs. In this article, at first, the authors have proposed a method of designing an optical three-input-three-output reversible Peres gate. Authors have deployed polarization switching characteristic of Semiconductor Optical Amplifier (SOA) for designing this circuit. The authors have also proposed a method of designing an optical reversible full adder, using two such Peres gates and subsequently a data recovery circuit which can recover the input data of the adder. The authors have chosen frequency encoded data for processing the operation. The proposed scheme has been verified by simulation results.
- 1 June 2017
- Published by SPIE-Intl Soc Optical Eng in Optical Engineering
- Vol. 56 (6) , 066105-14
Design of frequency-encoded data-based optical master-slave-JK flip-flop using polarization switch
An optical data processing and communication system provides enormous potential bandwidth and a very high processing speed, and it can fulfill the demands of the present generation. For an optical computing system, several data processing units that work in the optical domain are essential. Memory elements are undoubtedly essential to storing any information. Optical flip-flops can store one bit of optical information. From these flip-flop registers, counters can be developed. Here, the authors proposed an optical master-slave (MS)-JK flip-flop with the help of two-input and three-input optical NAND gates. Optical NAND gates have been developed using semiconductor optical amplifiers (SOAs). The nonlinear polarization switching property of an SOA has been exploited here, and it acts as a polarization switch in the proposed scheme. A frequency encoding technique is adopted for representing data. A specific frequency of an optical signal represents a binary data bit. This technique of data representation is helpful because frequency is the fundamental property of a signal, and it remains unaltered during reflection, refraction, absorption, etc. throughout the data propagation. The simulated results enhance the admissibility of the scheme.
- 1 June 2017
- Published by SPIE-Intl Soc Optical Eng in Optical Engineering
- Vol. 56 (6) , 066105-14
Design of frequency-encoded data-based optical master-slave-JK flip-flop using polarization switch
An optical data processing and communication system provides enormous potential bandwidth and a very high processing speed, and it can fulfill the demands of the present generation. For an optical computing system, several data processing units that work in the optical domain are essential. Memory elements are undoubtedly essential to storing any information. Optical flip-flops can store one bit of optical information. From these flip-flop registers, counters can be developed. Here, the authors proposed an optical master-slave (MS)-JK flip-flop with the help of two-input and three-input optical NAND gates. Optical NAND gates have been developed using semiconductor optical amplifiers (SOAs). The nonlinear polarization switching property of an SOA has been exploited here, and it acts as a polarization switch in the proposed scheme. A frequency encoding technique is adopted for representing data. A specific frequency of an optical signal represents a binary data bit. This technique of data representation is helpful because frequency is the fundamental property of a signal, and it remains unaltered during reflection, refraction, absorption, etc. throughout the data propagation. The simulated results enhance the admissibility of the scheme.
- 1 April 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Design of all-optical T-gate and quaternary subtractor circuit
All-optical data processing technology has the strong potential to reach the goal of ultra fast data processing for the present and coming generation. But use of conventional binary logic based operation degrades the expected speed because of the limitation of data representation scheme based on only two states. A very promising approach to deal with enormous amount of data with a very high speed is switching to Multi Valued Logic (MVL) from conventional binary logic based operation in the optical domain. In this article the authors have designed all-optical T-gate, a universal gate in quaternary logic system with radix-4, and an all-optical quaternary subtractor have also been developed using the T-gates. The basic building unit used to make these circuits are Semiconductor Optical Amplifiers (SOA). The property of polarization switching and frequency routing properties of SOA have been exploited in the present scheme. Here the authors have encoded every data bit with a particular frequency of an optical signal. The utility of the frequency encoding technique is that the value of frequency encoded data remains unchanged during transmission, and thereby bit error problem can be significantly reduced. The corresponding simulation results hike the acceptability of the proposed scheme.
- 1 April 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Design of all-optical T-gate and quaternary subtractor circuit
All-optical data processing technology has the strong potential to reach the goal of ultra fast data processing for the present and coming generation. But use of conventional binary logic based operation degrades the expected speed because of the limitation of data representation scheme based on only two states. A very promising approach to deal with enormous amount of data with a very high speed is switching to Multi Valued Logic (MVL) from conventional binary logic based operation in the optical domain. In this article the authors have designed all-optical T-gate, a universal gate in quaternary logic system with radix-4, and an all-optical quaternary subtractor have also been developed using the T-gates. The basic building unit used to make these circuits are Semiconductor Optical Amplifiers (SOA). The property of polarization switching and frequency routing properties of SOA have been exploited in the present scheme. Here the authors have encoded every data bit with a particular frequency of an optical signal. The utility of the frequency encoding technique is that the value of frequency encoded data remains unchanged during transmission, and thereby bit error problem can be significantly reduced. The corresponding simulation results hike the acceptability of the proposed scheme.
- 1 April 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Design of all-optical one bit binary comparator using reversible logic gates
In the last few years, reversible logic gates have been used widely for developing various types of arithmetic and logic processors due to its low power consumption and dissipation. Researchers prefer reversible logic gates for designing several types of optical switching devices in all-optical communication network. The modern high speed network, based on the conventional irreversible logic gates, faces a serious problem of heat generation due to the bit loss at the output, and the basic reason behind it is the unequal number of inputs and outputs. In case of reversible logic gate, the inputs are directly mapped to the outputs and thus, there is no chance of bit loss. Consequently, generation of heat due to bit loss is not possible ideally. In this article, authors have proposed a new technique for developing all-optical Feynman gate which is a simple two-input two-output reversible logic gate. All-optical circuit has been designed using optical polarization switches (PSW), made of Semiconductor Optical Amplifiers (SOA). The working principle is based on the theory of nonlinear polarization rotation of the probe beam in the SOA. Authors have also designed all-optical one bit binary comparator using reversible logic gates. The proposed scheme works on frequency encoded data. As the frequency is the inherent property of the signal, frequency encoded data based logic gates are more preferable for designing arithmetic and logic processor. Simulated results enhance the admissibility of the proposed schemes.
- 1 April 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Design of all-optical one bit binary comparator using reversible logic gates
In the last few years, reversible logic gates have been used widely for developing various types of arithmetic and logic processors due to its low power consumption and dissipation. Researchers prefer reversible logic gates for designing several types of optical switching devices in all-optical communication network. The modern high speed network, based on the conventional irreversible logic gates, faces a serious problem of heat generation due to the bit loss at the output, and the basic reason behind it is the unequal number of inputs and outputs. In case of reversible logic gate, the inputs are directly mapped to the outputs and thus, there is no chance of bit loss. Consequently, generation of heat due to bit loss is not possible ideally. In this article, authors have proposed a new technique for developing all-optical Feynman gate which is a simple two-input two-output reversible logic gate. All-optical circuit has been designed using optical polarization switches (PSW), made of Semiconductor Optical Amplifiers (SOA). The working principle is based on the theory of nonlinear polarization rotation of the probe beam in the SOA. Authors have also designed all-optical one bit binary comparator using reversible logic gates. The proposed scheme works on frequency encoded data. As the frequency is the inherent property of the signal, frequency encoded data based logic gates are more preferable for designing arithmetic and logic processor. Simulated results enhance the admissibility of the proposed schemes.
- 1 April 2016
- Published by Springer Nature in Journal of Optics
- Vol. 45 (2) , 197-207
Frequency encoded data based optical full adder using reversible Toffoli gates
- 1 April 2016
- Published by Springer Nature in Journal of Optics
- Vol. 45 (2) , 197-207
Frequency encoded data based optical full adder using reversible Toffoli gates