Hamed Dardaei Joghan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hamed Dardaei Joghan has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- Ahmet Erman Tekkaya
TU Dortmund
7 shared publications - Yannis P. Korkolis
TU Dortmund
4 shared publications A. Erman Tekkaya
Technische Universität Dortmund, Institut für Umformtechnik und Leichtbau (IUL) ; Baroper Str. 303 , Dortmund , Germany
3 shared publicationsMarlon Hahn
Institute of Forming Technology and Lightweight Components, TU Dortmund University , Dortmund 44227, Germany
3 shared publications- Marlon Hahn
TU Dortmund University
3 shared publications - Farin Weinert
TU Dortmund University Institute of Forming Technology and Lightweight Components
2 shared publications
Latest Publications
- 31 July 2026
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 148 (11)
Effect of Machine Hammer Peening and Ball Burnishing on the Surface Properties of Deposited Layers by Directed Energy Deposition
The surface of parts produced by directed energy deposition (DED) often requires postprocessing, especially for tooling applications. This study investigates ball burnishing (BB) and machine hammer peening (MHP) for improving surface roughness and hardness of components manufactured by laser metal deposition (LMD), a widely used DED process. Two metallic powders, 316L-Si stainless steel and Ferro55 tool steel, are deposited and evaluated. Two single-layer geometries are manufactured: single tracks (1D) and square areas (2D). Single-track specimens are used to examine local effects on cross-sectional profiles. BB is performed with a 6.3 mm ball at pressures of 100, 250, and 400 bar. MHP is conducted with an 8 mm ball at different impact energies of 30, 70, and 120 mJ. The same postprocessing parameters are applied to the 2D areas. In addition, the influence of track distance is evaluated by applying three relative tool-path overlaps, 30%, 55%, and 80% of the tool indentation. Surface roughness, hardness, and geometric deformation (e.g., flattening or distortion) are analyzed for all postprocessed samples. The results show that the two processes generate different material-dependent surface responses within the investigated parameter windows. In 316L-Si, BB produces a clear pressure-dependent response, resulting in pronounced roughness reduction and near-surface hardening. MHP also improves the areal surface quality of 316L-Si, particularly when high overlap is applied. In Ferro55, the overall roughness reduction is more limited because of the higher hardness and lower plastic deformability of the material. Nevertheless, repeated impact loading under MHP promotes measurable areal smoothing at high overlap. Because BB and MHP differ in tool geometry, loading mode, and energy transfer, the results are interpreted as process-window-specific material responses rather than as a direct ranking of the two methods. The relationship between 1D and 2D measurements shows that single-track experiments are useful for identifying local deformation trends but cannot directly predict the final areal surface quality, especially for MHP.
- 31 July 2026
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 148 (11)
Effect of Machine Hammer Peening and Ball Burnishing on the Surface Properties of Deposited Layers by Directed Energy Deposition
The surface of parts produced by directed energy deposition (DED) often requires postprocessing, especially for tooling applications. This study investigates ball burnishing (BB) and machine hammer peening (MHP) for improving surface roughness and hardness of components manufactured by laser metal deposition (LMD), a widely used DED process. Two metallic powders, 316L-Si stainless steel and Ferro55 tool steel, are deposited and evaluated. Two single-layer geometries are manufactured: single tracks (1D) and square areas (2D). Single-track specimens are used to examine local effects on cross-sectional profiles. BB is performed with a 6.3 mm ball at pressures of 100, 250, and 400 bar. MHP is conducted with an 8 mm ball at different impact energies of 30, 70, and 120 mJ. The same postprocessing parameters are applied to the 2D areas. In addition, the influence of track distance is evaluated by applying three relative tool-path overlaps, 30%, 55%, and 80% of the tool indentation. Surface roughness, hardness, and geometric deformation (e.g., flattening or distortion) are analyzed for all postprocessed samples. The results show that the two processes generate different material-dependent surface responses within the investigated parameter windows. In 316L-Si, BB produces a clear pressure-dependent response, resulting in pronounced roughness reduction and near-surface hardening. MHP also improves the areal surface quality of 316L-Si, particularly when high overlap is applied. In Ferro55, the overall roughness reduction is more limited because of the higher hardness and lower plastic deformability of the material. Nevertheless, repeated impact loading under MHP promotes measurable areal smoothing at high overlap. Because BB and MHP differ in tool geometry, loading mode, and energy transfer, the results are interpreted as process-window-specific material responses rather than as a direct ranking of the two methods. The relationship between 1D and 2D measurements shows that single-track experiments are useful for identifying local deformation trends but cannot directly predict the final areal surface quality, especially for MHP.
- Open Access
- 24 July 2026
- Published by Elsevier in Additive Manufacturing Letters
- Vol. 18
Inverse calibration of a thermal model for Directed Energy Deposition from thermocouple and infrared thermography data
- 24 July 2026
- Published by Elsevier in Additive Manufacturing Letters
- Vol. 18
Open AccessInverse calibration of a thermal model for Directed Energy Deposition from thermocouple and infrared thermography data
- Open Access
- 8 March 2026
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 41, 7712-7721
Fatigue strength prediction in incrementally formed sheet-parts with varying residual stresses
- 8 March 2026
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 41, 7712-7721
Open AccessFatigue strength prediction in incrementally formed sheet-parts with varying residual stresses
- 26 June 2025
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 147 (8)
Bendability Assessment of Double-Walled Tubes With Additively Manufactured Core Structure
Double-walled tubes offer significant advantages such as leak prevention, thermal insulation, corrosion resistance, and the ability to withstand high pressure, making them essential in the oil and gas, chemical, aerospace, and marine industries. Major manufacturing challenges arise when bending is required, e.g., for applications like heat exchangers. This study focuses on bending double-walled tubes, made up of E235 steel for both the outer and inner tubes (cold drawn and seamless), with an additively manufactured 316L stainless steel core structure serving as a spacer or core. The pure bendability of these tubes is investigated through experimental and numerical methods. The bending moments from experiments align well with numerical results, establishing the minimum bending radius for different tube and core combinations. As the ratio of the outer-tube-diameter-to-core-thickness increases, so does the minimum bending radius. Tube hydroforming is also employed, to improve the assembly before bending. The burst pressure is determined for each tube–core combination. A key factor affecting the burst pressure is the corner radius of the core structures. The experiments show that hydroforming has the potential to enhance the bendability of double-walled tubes. Numerical simulations indicate that combining hydroforming with simultaneous bending leads to a significantly improved minimum bending radius.
- 26 June 2025
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 147 (8)
Bendability Assessment of Double-Walled Tubes With Additively Manufactured Core Structure
Double-walled tubes offer significant advantages such as leak prevention, thermal insulation, corrosion resistance, and the ability to withstand high pressure, making them essential in the oil and gas, chemical, aerospace, and marine industries. Major manufacturing challenges arise when bending is required, e.g., for applications like heat exchangers. This study focuses on bending double-walled tubes, made up of E235 steel for both the outer and inner tubes (cold drawn and seamless), with an additively manufactured 316L stainless steel core structure serving as a spacer or core. The pure bendability of these tubes is investigated through experimental and numerical methods. The bending moments from experiments align well with numerical results, establishing the minimum bending radius for different tube and core combinations. As the ratio of the outer-tube-diameter-to-core-thickness increases, so does the minimum bending radius. Tube hydroforming is also employed, to improve the assembly before bending. The burst pressure is determined for each tube–core combination. A key factor affecting the burst pressure is the corner radius of the core structures. The experiments show that hydroforming has the potential to enhance the bendability of double-walled tubes. Numerical simulations indicate that combining hydroforming with simultaneous bending leads to a significantly improved minimum bending radius.
- 1 September 2024
- Published by ASME International in Journal of Micro and Nano Science and Engineering
- Vol. 12 (3)
On the Potential of Manufacturing Multi-Material Components With Micro/Nanocellular Structures Via the Hybrid Process of Electromagnetic Forming Injection Foaming
Multimaterial design with a combination of solid and foam structures offers a promising avenue for reducing component weight while enhancing their functionalities. However, the complexity of multistage manufacturing processes poses significant challenges to adopting such approaches. To address these challenges, this paper introduces an innovative concept known as Electromagnetic Forming Injection Foaming (EFIF), which integrates injection molding, forming, and foaming processes into a single hybrid process. This process begins with a simultaneous filling-forming phase, followed by supercritical fluid (SCF) assisted foaming controlled by electromagnetic forming. Through a series of experimental and analytical studies, this work investigates the feasibility and effectiveness of EFIF. First, the impact of pressure drop rate and pressure drop on cell size and density is examined through a specialized experimental setup enabling performing injection, forming, and foaming processes in a single operation. The potential influence of electromagnetic forming on foam injection molding is explored through experiments focusing on the effects of a polymer layer between sheet metal blank and the electromagnetic coils. Additionally, an analytical study evaluates the EFIF process by calculating expected pressure drop rates under different processing conditions and their influence on cell nucleation rates. The results showed the possibility of achieving pressure drop rates up to 1.5 × 105 bar/sec, resulting in nucleation rates up to 1.77 × 109 nuclei/cm3sec. Overall, this paper highlights the potential of EFIF to merge existing technologies into a scalable solution for manufacturing multimaterial components with micro- to nanocellular polymer foams.
- 1 September 2024
- Published by ASME International in Journal of Micro and Nano Science and Engineering
- Vol. 12 (3)
On the Potential of Manufacturing Multi-Material Components With Micro/Nanocellular Structures Via the Hybrid Process of Electromagnetic Forming Injection Foaming
Multimaterial design with a combination of solid and foam structures offers a promising avenue for reducing component weight while enhancing their functionalities. However, the complexity of multistage manufacturing processes poses significant challenges to adopting such approaches. To address these challenges, this paper introduces an innovative concept known as Electromagnetic Forming Injection Foaming (EFIF), which integrates injection molding, forming, and foaming processes into a single hybrid process. This process begins with a simultaneous filling-forming phase, followed by supercritical fluid (SCF) assisted foaming controlled by electromagnetic forming. Through a series of experimental and analytical studies, this work investigates the feasibility and effectiveness of EFIF. First, the impact of pressure drop rate and pressure drop on cell size and density is examined through a specialized experimental setup enabling performing injection, forming, and foaming processes in a single operation. The potential influence of electromagnetic forming on foam injection molding is explored through experiments focusing on the effects of a polymer layer between sheet metal blank and the electromagnetic coils. Additionally, an analytical study evaluates the EFIF process by calculating expected pressure drop rates under different processing conditions and their influence on cell nucleation rates. The results showed the possibility of achieving pressure drop rates up to 1.5 × 105 bar/sec, resulting in nucleation rates up to 1.77 × 109 nuclei/cm3sec. Overall, this paper highlights the potential of EFIF to merge existing technologies into a scalable solution for manufacturing multimaterial components with micro- to nanocellular polymer foams.
- Open Access
- 15 May 2024
- Published by Materials Research Forum, LLC in Materials Research Proceedings
- Vol. 41
Realization of functionally graded components with an optimized hybrid additive laminated tooling method
Realization of functionally graded components with an optimized hybrid additive laminated tooling method DARDAEI JOGHAN Hamed, AGBOOLA Ololade, TEKKAYA A. E
- 15 May 2024
- Published by Materials Research Forum, LLC in Materials Research Proceedings
- Vol. 41
Open AccessRealization of functionally graded components with an optimized hybrid additive laminated tooling method
Realization of functionally graded components with an optimized hybrid additive laminated tooling method DARDAEI JOGHAN Hamed, AGBOOLA Ololade, TEKKAYA A. E
- Open Access
- 1 August 2023
- Published by Springer Nature in Automotive Innovation
- Vol. 6 (3) , 311-323
Hybrid Additive Manufacturing of Forming Tools
Additive manufacturing (AM) is widely used in the automotive industry and has been expanded to include aerospace, marine, and rail. High flexibility and the possibility of manufacturing complex parts in AM motivate the integration of additive manufacturing with classical forming technologies, which can improve tooling concepts and reduce costs. This study presents three applications of this integration. First, the possibility of successful utilization of selective laser melting for manufacturing extrusion tools with complex cooling channels and paths for thermocouples is reported, leading to significantly reduced inner die temperatures during the extrusion process. Second, sheet lamination is integrated with laser metal deposition (LMD) to manufacture deep-drawing dies. Promising results are achieved in reducing the stair step effect, which is the main challenge in sheet lamination, by LMD and following post-processing such as milling, ball burnishing, and laser polishing. The new manufacturing route shows that LMD can economically and efficiently reduce the stair step effect and omit the hardening step from the conventional manufacturing process route. Finally, LMD is used to manufacture a hot stamping punch with improved surface roughness by ball burnishing and near-surface complex cooling channels. The experimental results show that the manufactured punch has lower temperatures during hot stamping compared with the conventionally manufactured punch. This study shows the successful integration of AM processes with classical forming processes.
- 1 August 2023
- Published by Springer Nature in Automotive Innovation
- Vol. 6 (3) , 311-323
Open AccessHybrid Additive Manufacturing of Forming Tools
Additive manufacturing (AM) is widely used in the automotive industry and has been expanded to include aerospace, marine, and rail. High flexibility and the possibility of manufacturing complex parts in AM motivate the integration of additive manufacturing with classical forming technologies, which can improve tooling concepts and reduce costs. This study presents three applications of this integration. First, the possibility of successful utilization of selective laser melting for manufacturing extrusion tools with complex cooling channels and paths for thermocouples is reported, leading to significantly reduced inner die temperatures during the extrusion process. Second, sheet lamination is integrated with laser metal deposition (LMD) to manufacture deep-drawing dies. Promising results are achieved in reducing the stair step effect, which is the main challenge in sheet lamination, by LMD and following post-processing such as milling, ball burnishing, and laser polishing. The new manufacturing route shows that LMD can economically and efficiently reduce the stair step effect and omit the hardening step from the conventional manufacturing process route. Finally, LMD is used to manufacture a hot stamping punch with improved surface roughness by ball burnishing and near-surface complex cooling channels. The experimental results show that the manufactured punch has lower temperatures during hot stamping compared with the conventionally manufactured punch. This study shows the successful integration of AM processes with classical forming processes.
- 1 August 2023
- Published by Walter de Gruyter GmbH in Zeitschrift für wirtschaftlichen Fabrikbetrieb
- Vol. 118 (7-8) , 481-485
Verfahrenskombination aus inkrementeller Blechumformung und Laserpulverauftragsschweißen
Die inkrementelle Blechumformung wurde mit Laserpulverauftragsschweißen kombiniert, um schalenförmige Leichtbauteile mit Funktionselementen herzustellen. Die Verfahrenskombination lässt die Fertigung von leichten, funktionalisierten Bauteilen, ohne den Einsatz bauteilspezifischer Werkzeuge, bei effizientem Materialeinsatz erwarten. Es sind keine besonderen Strategien zur Anpassung der Substratoberfläche auf den additiven Fertigungsprozess erforderlich, und über eine segmentierte Baustrategie lässt sich der thermische Verzug des Substrats reduzieren.
- 1 August 2023
- Published by Walter de Gruyter GmbH in Zeitschrift für wirtschaftlichen Fabrikbetrieb
- Vol. 118 (7-8) , 481-485
Verfahrenskombination aus inkrementeller Blechumformung und Laserpulverauftragsschweißen
Die inkrementelle Blechumformung wurde mit Laserpulverauftragsschweißen kombiniert, um schalenförmige Leichtbauteile mit Funktionselementen herzustellen. Die Verfahrenskombination lässt die Fertigung von leichten, funktionalisierten Bauteilen, ohne den Einsatz bauteilspezifischer Werkzeuge, bei effizientem Materialeinsatz erwarten. Es sind keine besonderen Strategien zur Anpassung der Substratoberfläche auf den additiven Fertigungsprozess erforderlich, und über eine segmentierte Baustrategie lässt sich der thermische Verzug des Substrats reduzieren.
- Open Access
- 19 April 2023
- Published by Materials Research Forum, LLC in Materials Research Proceedings
- Vol. 28, 21-30
Resources and manufacturing technology evaluation of hybrid additive metal laminated tooling for forming
The rough surface finish caused by the stair step effect is the major drawback in the application of sheet metal laminates in rapid tooling. The application of laser metal deposition (LMD) and subsequent post-processing (milling, ball burnishing, and laser polishing) to reduce the stair-step effect in hybrid additive metal laminated forming tools was recently presented. In the present study, the energy consumption and manufacturing time of the hybrid process are compared with the conventional (milling plus hardening by heat treatment) as well as with full LMD and milled components. The hybrid process requires significantly less energy and manufacturing time compared to the LMD components. Since the surface hardness is sufficient for tooling in the hybrid process, no additional hardening is required, also resulting in a shorter manufacturing time and lower energy relative to the conventional method (depending on the part mass, a minimum of 29% is faster). The optimal sheet laminate combination based on the economic criteria for the tool with a radius of 6 mm is presented.
- 19 April 2023
- Published by Materials Research Forum, LLC in Materials Research Proceedings
- Vol. 28, 21-30
Open AccessResources and manufacturing technology evaluation of hybrid additive metal laminated tooling for forming
The rough surface finish caused by the stair step effect is the major drawback in the application of sheet metal laminates in rapid tooling. The application of laser metal deposition (LMD) and subsequent post-processing (milling, ball burnishing, and laser polishing) to reduce the stair-step effect in hybrid additive metal laminated forming tools was recently presented. In the present study, the energy consumption and manufacturing time of the hybrid process are compared with the conventional (milling plus hardening by heat treatment) as well as with full LMD and milled components. The hybrid process requires significantly less energy and manufacturing time compared to the LMD components. Since the surface hardness is sufficient for tooling in the hybrid process, no additional hardening is required, also resulting in a shorter manufacturing time and lower energy relative to the conventional method (depending on the part mass, a minimum of 29% is faster). The optimal sheet laminate combination based on the economic criteria for the tool with a radius of 6 mm is presented.
- Open Access
- 22 December 2022
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 125 (1-2) , 157-168
Effect of preheating during laser metal deposition on the properties of laminated bending dies
Metal-laminated tooling provides a fast and cheap manufacturing concept. In this study, laser metal deposition (LMD) is used for reducing and eliminating the stair step effect in a metal-laminated bending die. Preheating could decrease the undesired residual stresses in additive manufacturing, thus a systematical analysis of the effect of preheating of the laminae on the surface quality and mechanical properties of the bending die is performed. Ferritic steel sheets (S355 MC) with a thickness of 2 mm are laser cut and stacked up to manufacture the laminated bending die with a radius of 6 mm. The sheets are joined and the stair steps are filled with LMD with stainless steel powder 316L-Si. The initial temperature of the tool sheets (substrates), beside room temperature, is elevated up to 300 °C. The effect of the preheating on the surface roughness, shape deviation, hardness, and residual stresses of the die are investigated. The mean height of the surface increases by 59% at elevated temperatures. However, the tensile residual stress parallel to the weld direction at the middle of the deposited area decreases only around 25%. The functionality of the forming tools manufactured by this method is proven by bending of DC06 and HC380LA sheets.
- 22 December 2022
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 125 (1-2) , 157-168
Open AccessEffect of preheating during laser metal deposition on the properties of laminated bending dies
Metal-laminated tooling provides a fast and cheap manufacturing concept. In this study, laser metal deposition (LMD) is used for reducing and eliminating the stair step effect in a metal-laminated bending die. Preheating could decrease the undesired residual stresses in additive manufacturing, thus a systematical analysis of the effect of preheating of the laminae on the surface quality and mechanical properties of the bending die is performed. Ferritic steel sheets (S355 MC) with a thickness of 2 mm are laser cut and stacked up to manufacture the laminated bending die with a radius of 6 mm. The sheets are joined and the stair steps are filled with LMD with stainless steel powder 316L-Si. The initial temperature of the tool sheets (substrates), beside room temperature, is elevated up to 300 °C. The effect of the preheating on the surface roughness, shape deviation, hardness, and residual stresses of the die are investigated. The mean height of the surface increases by 59% at elevated temperatures. However, the tensile residual stress parallel to the weld direction at the middle of the deposited area decreases only around 25%. The functionality of the forming tools manufactured by this method is proven by bending of DC06 and HC380LA sheets.