Nadiia Vasylkiv
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Nadiia Vasylkiv has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- Lesia Dubchak
Faculty of Computer Information Technologies, West Ukrainian National University, 46001 Ternopil, Ukraine
6 shared publications - Volodymyr Kochan
Західноукраїнський національний університет
6 shared publications - Anatoliy Sachenko
Faculty of Computer Information Technologies, West Ukrainian National University, 46001 Ternopil, Ukraine
4 shared publications - Roman Kochan
Lviv Polytechnic National University
4 shared publications - Carsten Wolff
Dortmund University of Applied Sciences and Arts, Germany
2 shared publications - Orest Kochan
Department of Information-Measuring Technologies, Lviv Polytechnic National University, 79013 Lviv, Ukraine
2 shared publications
Latest Publications
- Open Access
- 30 September 2026
- Published by Kharkiv National University of Radioelectronics in Innovative technologies and scientific solutions for industries
- No. 3(37),p. 176-187
Mathematical model for integrated assessment of daily biogas plant operating modes using industrial production data
Information-analytical assessment of daily operating modes of an industrial biogas plant using production records from a supervisory control and data acquisition system. Aim. To improve the validity of integrated operating-efficiency assessment by accounting for feedstock-specific physical properties, the time inertia of anaerobic digestion, and dependence between criteria. Objectives. To correct the source-data structure and record counts; substantiate the criterion system; replace an equal fresh-mass feedstock coefficient with a substrate-specific methane-potential model; introduce a process lag; determine adaptive weights and operating-mode classes; perform physics-based and temporal consistency checks, analyze dependencies between criteria, conduct sensitivity analysis, and formulate operational recommendations. Methods. Daily production-log preprocessing, literature-based biochemical methane-potential coefficients and scenario TS and VS/TS values, a fixed 10-day lag, min-max normalisation, Shannon entropy, the CRITIC method, quartile classification, correlation analysis, and one-at-a-time weight sensitivity analysis were applied. Results. The 2024 dataset contains 366 daily records; the 10-day forward lag leaves 356 observations for the integrated performance score. The estimated methane potential averaged 3904.83 Nm3/day. Its correlation with future electricity generation was 0.176 at a 10-day lag, while the maximum within 0–30 days occurred at 13 days (0.227). Final weights for , , , , and were 0.3207, 0.1746, 0.0197, 0.0909, and 0.3941, respectively. Mean IPS was 0.4682; for active modes and . The 356 lag-valid days comprised 51 high-efficiency, 102 typical, 51 low-efficiency, and 152 shutdown modes. Perturbing one final weight by ±10% changed mean by at most 1.234%. Conclusions. The model provides a reproducible decomposable assessment of daily operation, avoids treating equal fresh masses of different substrates as energetically equivalent, explicitly accounts for process inertia, and supports diagnosis of the dominant causes of reduced performance. Transfer of the numerical weights and thresholds to other plants requires independent external validation.
- 30 September 2026
- Published by Kharkiv National University of Radioelectronics in Innovative technologies and scientific solutions for industries
- No. 3(37),p. 176-187
Open AccessMathematical model for integrated assessment of daily biogas plant operating modes using industrial production data
Information-analytical assessment of daily operating modes of an industrial biogas plant using production records from a supervisory control and data acquisition system. Aim. To improve the validity of integrated operating-efficiency assessment by accounting for feedstock-specific physical properties, the time inertia of anaerobic digestion, and dependence between criteria. Objectives. To correct the source-data structure and record counts; substantiate the criterion system; replace an equal fresh-mass feedstock coefficient with a substrate-specific methane-potential model; introduce a process lag; determine adaptive weights and operating-mode classes; perform physics-based and temporal consistency checks, analyze dependencies between criteria, conduct sensitivity analysis, and formulate operational recommendations. Methods. Daily production-log preprocessing, literature-based biochemical methane-potential coefficients and scenario TS and VS/TS values, a fixed 10-day lag, min-max normalisation, Shannon entropy, the CRITIC method, quartile classification, correlation analysis, and one-at-a-time weight sensitivity analysis were applied. Results. The 2024 dataset contains 366 daily records; the 10-day forward lag leaves 356 observations for the integrated performance score. The estimated methane potential averaged 3904.83 Nm3/day. Its correlation with future electricity generation was 0.176 at a 10-day lag, while the maximum within 0–30 days occurred at 13 days (0.227). Final weights for , , , , and were 0.3207, 0.1746, 0.0197, 0.0909, and 0.3941, respectively. Mean IPS was 0.4682; for active modes and . The 356 lag-valid days comprised 51 high-efficiency, 102 typical, 51 low-efficiency, and 152 shutdown modes. Perturbing one final weight by ±10% changed mean by at most 1.234%. Conclusions. The model provides a reproducible decomposable assessment of daily operation, avoids treating equal fresh masses of different substrates as energetically equivalent, explicitly accounts for process inertia, and supports diagnosis of the dominant causes of reduced performance. Transfer of the numerical weights and thresholds to other plants requires independent external validation.
- 22 January 2026
- Published by National Aerospace University - Kharkiv Aviation Institute in RADIOELECTRONIC AND COMPUTER SYSTEMS
- Vol. 2026 (1) , 111-124
Integrated hardware–software complex for wind turbine blade defect classification
The subject matter of this article is an integrated hardware–software complex for real-time detection and classification of wind turbine blade defects using an unmanned aerial vehicle (UAV) equipped with onboard edge-AI modules. The goal of the study is to develop and experimentally validate an autonomous embedded framework capable of collecting, processing, and interpreting blade-surface image data under field conditions while maintaining sufficient diagnostic accuracy and real-time performance on resource-constrained hardware. The tasks of the study are to design the architecture of the UAV-based inspection system; to implement an onboard processing pipeline including image acquisition, preprocessing, defect detection, classification, and georeferenced data association; to develop a lightweight YOLO-based visual detection stage combined with a neuro-fuzzy decision module; and to evaluate the diagnostic and computational performance of the proposed system on Raspberry Pi 5. The methods used include lightweight deep-learning-based visual analysis, neuro-fuzzy inference based on Gaussian membership functions and Wang–Mendel-type adaptation, telemetry-assisted defect georeferencing, and experimental evaluation under embedded deployment constraints. The results obtained show that the developed prototype provides stable onboard operation at 5–6 FPS for 640×480 video, supports local processing without cloud infrastructure, and ensures reliable defect-state recognition for four predefined blade-surface classes: Erosion, Corrosion, Crack, and Pristine. In the integrated validation workflow, the system achieved 88.1% classification accuracy, while the neuro-fuzzy decision module evaluated separately on YOLO-derived class-coefficient vectors achieved 94.0% accuracy with an MSE of 0.0686. Conclusions. The scientific novelty lies in the development of a fully autonomous UAV-based diagnostic architecture that combines onboard visual detection, telemetry fusion, and neuro-fuzzy decision support on limited embedded hardware, as well as in the adaptation of the neuro-fuzzy classifier for real-time multiclass blade-condition assessment
- 22 January 2026
- Published by National Aerospace University - Kharkiv Aviation Institute in RADIOELECTRONIC AND COMPUTER SYSTEMS
- Vol. 2026 (1) , 111-124
Integrated hardware–software complex for wind turbine blade defect classification
The subject matter of this article is an integrated hardware–software complex for real-time detection and classification of wind turbine blade defects using an unmanned aerial vehicle (UAV) equipped with onboard edge-AI modules. The goal of the study is to develop and experimentally validate an autonomous embedded framework capable of collecting, processing, and interpreting blade-surface image data under field conditions while maintaining sufficient diagnostic accuracy and real-time performance on resource-constrained hardware. The tasks of the study are to design the architecture of the UAV-based inspection system; to implement an onboard processing pipeline including image acquisition, preprocessing, defect detection, classification, and georeferenced data association; to develop a lightweight YOLO-based visual detection stage combined with a neuro-fuzzy decision module; and to evaluate the diagnostic and computational performance of the proposed system on Raspberry Pi 5. The methods used include lightweight deep-learning-based visual analysis, neuro-fuzzy inference based on Gaussian membership functions and Wang–Mendel-type adaptation, telemetry-assisted defect georeferencing, and experimental evaluation under embedded deployment constraints. The results obtained show that the developed prototype provides stable onboard operation at 5–6 FPS for 640×480 video, supports local processing without cloud infrastructure, and ensures reliable defect-state recognition for four predefined blade-surface classes: Erosion, Corrosion, Crack, and Pristine. In the integrated validation workflow, the system achieved 88.1% classification accuracy, while the neuro-fuzzy decision module evaluated separately on YOLO-derived class-coefficient vectors achieved 94.0% accuracy with an MSE of 0.0686. Conclusions. The scientific novelty lies in the development of a fully autonomous UAV-based diagnostic architecture that combines onboard visual detection, telemetry fusion, and neuro-fuzzy decision support on limited embedded hardware, as well as in the adaptation of the neuro-fuzzy classifier for real-time multiclass blade-condition assessment
- Open Access
- 19 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 166841-166852
Modified Neuro-Fuzzy System for Online Classification of Wind Turbine Blade Defects
This study considers the current problem of the automated detection and classification of defects in wind turbine blades in the context of the development of modern wind energy. A critical analysis of the application of existing diagnostic methods, particularly convolutional neural networks and LIDAR technologies, was conducted, emphasizing their advantages and limitations. As an alternative solution, an adaptive neuro-fuzzy system based on the modified architecture of the Wang–Mendel system is used, which is optimized for classification tasks under conditions of limited data and nonstationary information flows. A detailed description of the system structure, features of its online training, and the implementation of a modular architecture considering the effective processing of features and preservation of the interpretability of the results are presented. The experimental results demonstrated that the proposed system achieves high classification accuracy with a significant reduction in computational costs compared to classical models, making it a promising candidate for implementation in practical systems for the technical monitoring of wind turbines.
- 19 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 166841-166852
Open AccessModified Neuro-Fuzzy System for Online Classification of Wind Turbine Blade Defects
This study considers the current problem of the automated detection and classification of defects in wind turbine blades in the context of the development of modern wind energy. A critical analysis of the application of existing diagnostic methods, particularly convolutional neural networks and LIDAR technologies, was conducted, emphasizing their advantages and limitations. As an alternative solution, an adaptive neuro-fuzzy system based on the modified architecture of the Wang–Mendel system is used, which is optimized for classification tasks under conditions of limited data and nonstationary information flows. A detailed description of the system structure, features of its online training, and the implementation of a modular architecture considering the effective processing of features and preservation of the interpretability of the results are presented. The experimental results demonstrated that the proposed system achieves high classification accuracy with a significant reduction in computational costs compared to classical models, making it a promising candidate for implementation in practical systems for the technical monitoring of wind turbines.
- 23 December 2020
- Published by Springer Nature
- p. 1045-1055
Intelligent Method of Forming the HR Management Short-Term Project
- 23 December 2020
- Published by Springer Nature
- p. 1045-1055
Intelligent Method of Forming the HR Management Short-Term Project
- 1 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2, 980-984
Fuzzy Estimation Method of Information System Providing Part Influence on the Functioning Quality
The fuzzy estimation method of the information system providing part influence on the functioning quality is developed. It's based on a fuzzy system, the inputs of which are the states of reliability for software, technical and information providing, and the output is the quality of system functioning.
- 1 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2, 980-984
Fuzzy Estimation Method of Information System Providing Part Influence on the Functioning Quality
The fuzzy estimation method of the information system providing part influence on the functioning quality is developed. It's based on a fuzzy system, the inputs of which are the states of reliability for software, technical and information providing, and the output is the quality of system functioning.
- 1 September 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 26-29
Tasks distribution for students testing based on fuzzy logic
The article suggests the implementation of the tasks distribution system for students testing considering grade point average and current progress. This system is based on fuzzy logic. Fuzzy system rules were constructed and the system was checked for correctness of functioning.
- 1 September 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 26-29
Tasks distribution for students testing based on fuzzy logic
The article suggests the implementation of the tasks distribution system for students testing considering grade point average and current progress. This system is based on fuzzy logic. Fuzzy system rules were constructed and the system was checked for correctness of functioning.
- 14 November 2015
- Published by Springer Nature in Measurement Techniques
- Vol. 58 (8) , 904-910
A Method of Correcting the Error of Temperature Measurements Due to Acquired Inhomogeneity of the Electrodes of Thermocouples
- 14 November 2015
- Published by Springer Nature in Measurement Techniques
- Vol. 58 (8) , 904-910
A Method of Correcting the Error of Temperature Measurements Due to Acquired Inhomogeneity of the Electrodes of Thermocouples
- 1 September 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2, 773-778
The method of self-testing of thermocouples in situ
This paper considers the method of self-testing of thermocouple electrodes degradation without replacement from the operation place. The equivalent operating time of a thermocouple is obtained. This time allows determining its place in conversional characteristic error dependence on drift and acquired inhomogeneity. The necessary condition enabling self-testing is constant measuring junction temperature during the procedure of self-testing.
- 1 September 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2, 773-778
The method of self-testing of thermocouples in situ
This paper considers the method of self-testing of thermocouple electrodes degradation without replacement from the operation place. The equivalent operating time of a thermocouple is obtained. This time allows determining its place in conversional characteristic error dependence on drift and acquired inhomogeneity. The necessary condition enabling self-testing is constant measuring junction temperature during the procedure of self-testing.
- 1 September 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 01, 373-375
Fuzzy data processing method
This paper proposes a method for fuzzy data processing based on Mamdani's fuzzy inference method. The implementation of this method is divided into phases of training and exploitation, which reduces the number of operations during fuzzy data processing and improves its performance. The analysis of the time complexity of the proposed method shows the reduction in run-time processing of fuzzy data four times comparatively to the time of the realization of fuzzy inference by classical Mamdani's mechanism.
- 1 September 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 01, 373-375
Fuzzy data processing method
This paper proposes a method for fuzzy data processing based on Mamdani's fuzzy inference method. The implementation of this method is divided into phases of training and exploitation, which reduces the number of operations during fuzzy data processing and improves its performance. The analysis of the time complexity of the proposed method shows the reduction in run-time processing of fuzzy data four times comparatively to the time of the realization of fuzzy inference by classical Mamdani's mechanism.
- 1 September 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2, 717-721
Assessment of probabilistic parameters of alarm security detectors taking uncertain noise into account
A method for assessment detector's false alarm and fault was developed. It includes the assessments of noise intensity barriers and detector's vulnerability to them using fuzzy sets and their defuzzification. It allows considering different environmental influences that may cause improper functioning of the alarm systems.
- 1 September 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2, 717-721
Assessment of probabilistic parameters of alarm security detectors taking uncertain noise into account
A method for assessment detector's false alarm and fault was developed. It includes the assessments of noise intensity barriers and detector's vulnerability to them using fuzzy sets and their defuzzification. It allows considering different environmental influences that may cause improper functioning of the alarm systems.