Gerardo Mino-Aguilar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Gerardo Mino-Aguilar has a total of 56 co-authors. Here are the top co-authors by number of shared publications:
- José Fermi Guerrero-Castellanos
Electronic Sciences Faculty, Meritorious Autonomous University of Puebla (BUAP), Puebla de Zaragoza 72592, Mexico
12 shared publications - German Ardul Munoz-Hernandez
Department of Electronic Sciences, Meritorious Autonomous University of Puebla (BUAP), Puebla, Mexico
7 shared publications - Victor Rodolfo Gonzalez Diaz
Autonomous University of Puebla (BUAP)
6 shared publications - Jesus Linares Flores
Universidad Tecnológica de la Mixteca
3 shared publications - Wuiyevaldo Fermín Guerrero-Sánchez
Facultad de Ciencias Físico-Matemáticas, Benemérita Universidad Autónoma de Puebla (BUAP), Puebla 72570, Mexico
3 shared publications - Carlos A. Reusser
School of Electrical Engineering, Pontificia Universidad Catolica de Valparaiso, Valparaíso 2340025, Chile
2 shared publications
Latest Publications
- Open Access
Trajectory Control for Car-like Mobile Robots via Frugal Predictive Control with Integrated Disturbance Rejection
This paper presents a hierarchical control architecture for high-precision trajectory tracking of a car-like mobile robot (CLMB) operating under external disturbances arising from normal and tangential wheel forces. The proposed solution addresses the critical challenge of simultaneously rejecting disturbances and accurately following a predefined path at a determined cruise velocity. Since the vehicle is equipped with an electronic differential at the low level, a nonlinear dynamic control (NDC) scheme is implemented to regulate the speed in each wheel. This controller actively estimates and compensates for differential traction losses and other lumped disturbances in real time, ensuring robust wheel velocity tracking across varying terrain conditions. The compensated system is then governed by a high-level frugal model predictive controller (FMPC) that leverages a dynamic vehicle model to compute optimal steering and velocity commands, thereby minimizing future trajectory-tracking errors. To achieve a precise and reliable state estimation necessary for feedback control, an Extended Kalman Filter (EKF) is designed to fuse high-frequency data from wheel encoders with absolute pose measurements from a motion capture system, mitigating the drift inherent in odometry alone. Experimental results on a physical robotic platform demonstrate tracking accuracy and robust disturbance rejection under different operating conditions.
Open AccessTrajectory Control for Car-like Mobile Robots via Frugal Predictive Control with Integrated Disturbance Rejection
This paper presents a hierarchical control architecture for high-precision trajectory tracking of a car-like mobile robot (CLMB) operating under external disturbances arising from normal and tangential wheel forces. The proposed solution addresses the critical challenge of simultaneously rejecting disturbances and accurately following a predefined path at a determined cruise velocity. Since the vehicle is equipped with an electronic differential at the low level, a nonlinear dynamic control (NDC) scheme is implemented to regulate the speed in each wheel. This controller actively estimates and compensates for differential traction losses and other lumped disturbances in real time, ensuring robust wheel velocity tracking across varying terrain conditions. The compensated system is then governed by a high-level frugal model predictive controller (FMPC) that leverages a dynamic vehicle model to compute optimal steering and velocity commands, thereby minimizing future trajectory-tracking errors. To achieve a precise and reliable state estimation necessary for feedback control, an Extended Kalman Filter (EKF) is designed to fuse high-frequency data from wheel encoders with absolute pose measurements from a motion capture system, mitigating the drift inherent in odometry alone. Experimental results on a physical robotic platform demonstrate tracking accuracy and robust disturbance rejection under different operating conditions.
- 28 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 41-45
Robust Linear Control of a Solar-Powered DC/DC Boost Converter Using a Discrete Extended State Observer
In this paper, a linear robust control design is proposed for the DC/DC Boost power converter. The controller is based on a linear model derived from the discrete extended state observer. The system's nonlinear dynamics and external disturbances are treated as an extended state within the observer dynamics. The DC/DC Boost power converter is powered by a photovoltaic panel. The performance of the proposed linear controller and observer under abrupt load perturbations is validated through circuit-level simulations using the Simscape toolbox in MATLAB/Simulink.
- 28 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 41-45
Robust Linear Control of a Solar-Powered DC/DC Boost Converter Using a Discrete Extended State Observer
In this paper, a linear robust control design is proposed for the DC/DC Boost power converter. The controller is based on a linear model derived from the discrete extended state observer. The system's nonlinear dynamics and external disturbances are treated as an extended state within the observer dynamics. The DC/DC Boost power converter is powered by a photovoltaic panel. The performance of the proposed linear controller and observer under abrupt load perturbations is validated through circuit-level simulations using the Simscape toolbox in MATLAB/Simulink.
- Open Access
Comparison of Induction Machine Drive Control Schemes on the Distribution of Power Losses in a Three-Level NPC Converter
Medium- and high-power drive applications have grown since the past decade as the most common solution for high demanding industrial processes. Multilevel converters, in particular the three-level neutral point clamped (3L-NPC) topology driving medium-voltage induction machines, has become the most commonly adopted solution. In this context, several AC drive control schemes are suitable, such as scalar control (SC), field-oriented control (FOC), model predictive control (MPC), and direct torque control (DTC). Each of these control strategies exhibit a particular operational profile which affects the switching pattern of the converter semiconductors, thus conditioning the switching and conducting losses of these power devices. This work presents a comparison of the conduction and switching losses between different drives control schemes, such as scalar control, field-oriented control, direct torque control, and model predictive control, analyzing their impact on thermal efficiency in a 3L-NPC multilevel converter, under different loading operational conditions. This analysis allows for choosing the most suitable control strategy and switching frequency for a given operational profile.
Open AccessComparison of Induction Machine Drive Control Schemes on the Distribution of Power Losses in a Three-Level NPC Converter
Medium- and high-power drive applications have grown since the past decade as the most common solution for high demanding industrial processes. Multilevel converters, in particular the three-level neutral point clamped (3L-NPC) topology driving medium-voltage induction machines, has become the most commonly adopted solution. In this context, several AC drive control schemes are suitable, such as scalar control (SC), field-oriented control (FOC), model predictive control (MPC), and direct torque control (DTC). Each of these control strategies exhibit a particular operational profile which affects the switching pattern of the converter semiconductors, thus conditioning the switching and conducting losses of these power devices. This work presents a comparison of the conduction and switching losses between different drives control schemes, such as scalar control, field-oriented control, direct torque control, and model predictive control, analyzing their impact on thermal efficiency in a 3L-NPC multilevel converter, under different loading operational conditions. This analysis allows for choosing the most suitable control strategy and switching frequency for a given operational profile.
- Open Access
- 29 November 2024
- Published by Editorial Académica Dragón Azteca in International Journal of Combinatorial Optimization Problems and Informatics
- Vol. 15 (5) , 218-227
Performance Analysis of Ultra-dense Networks with Frequency Reuse
Ultra-dense networks (UDN) have become a key technology in future communications systems by deploying a large number of low-power small cell base stations (SBS). However, ultra-dense deployment of small cells in the coverage area of conventional macrocells presents new challenges, such as inter-tier interference (interference between small cells (SC) and macro cells (MC)) and both-tier interference (interference between small cells), which may affect the overall network performance. In this work, in order to mitigate interference, frequency reuse is used. The simulation was performed with MATLAB software based on Monte Carlo methodology for discrete events, with the objective of evaluating the impact of ultra-dense networks within fixed infrastructure wireless networks. The main performance indicators are the Signal to Interference Ratio (SIR) and throughput.
- 29 November 2024
- Published by Editorial Académica Dragón Azteca in International Journal of Combinatorial Optimization Problems and Informatics
- Vol. 15 (5) , 218-227
Open AccessPerformance Analysis of Ultra-dense Networks with Frequency Reuse
Ultra-dense networks (UDN) have become a key technology in future communications systems by deploying a large number of low-power small cell base stations (SBS). However, ultra-dense deployment of small cells in the coverage area of conventional macrocells presents new challenges, such as inter-tier interference (interference between small cells (SC) and macro cells (MC)) and both-tier interference (interference between small cells), which may affect the overall network performance. In this work, in order to mitigate interference, frequency reuse is used. The simulation was performed with MATLAB software based on Monte Carlo methodology for discrete events, with the objective of evaluating the impact of ultra-dense networks within fixed infrastructure wireless networks. The main performance indicators are the Signal to Interference Ratio (SIR) and throughput.
- Open Access
- 30 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 142799-142808
On-Chip CMOS Power Meter for Solar Cell Maximum Power Point Tracking
This manuscript proposes and describes an on-chip power meter for photo voltaic power generation. The power meter provides the average measure for Maximum PowerPoint Tracking in DC-DC converters. The integrated chip power meter estimates the average current consumption using the DC-DC control system’s discrete-time nature. The power meter synthesis in a 65nm CMOS process explores the implementation with a simple structure and the theoretical considerations for real power measurement. The experimental results with 1.2Volts in bias conditions consume 5 percent of the overall DC-DC control system with the possible application into systems with alternative energy transducers.
- 30 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 142799-142808
Open AccessOn-Chip CMOS Power Meter for Solar Cell Maximum Power Point Tracking
This manuscript proposes and describes an on-chip power meter for photo voltaic power generation. The power meter provides the average measure for Maximum PowerPoint Tracking in DC-DC converters. The integrated chip power meter estimates the average current consumption using the DC-DC control system’s discrete-time nature. The power meter synthesis in a 65nm CMOS process explores the implementation with a simple structure and the theoretical considerations for real power measurement. The experimental results with 1.2Volts in bias conditions consume 5 percent of the overall DC-DC control system with the possible application into systems with alternative energy transducers.
- Open Access
Novel Energy Management Scheme for a Permanent Magnet Electric Drive-Based Hybrid Vehicle Using Model Predictive Control
The present work deals with the design of a traction system for a hybrid vehicle using a PMSM-type motor, including an energy regeneration stage, using a Neutral Point Piloted (NPP) inverter. Optimal operation allows the motor to be supplied in the traction stage with the correct energy in such a way that it operates properly; on the other hand, during braking, it facilitates the transfer of energy in regenerative mode to the DC bus, storing the greatest amount of energy in the storage elements, which, in this case, refers to a battery bank. It also includes a DC-DC bidirectional boost interleaved converter to regulate the DC voltage levels both in traction and in braking. Its fundamental characteristic is that with a reduced number of switching devices, it allows for the reduction in DC voltage of the DC bus with adequate characteristics, constant and stable, regardless of abrupt changes in the output voltage reference value. Also, other features include oscillation control, that is, reducing or increasing oscillations according to operating conditions. Its transient operation is excellent, since the settling time is considerably reduced, which implies that the voltage of the DC bus does not cause mishaps in the operation of the motor. In its operation as a boost converter, in the event of any voltage value of the DC bus, the converter raises the voltage value according to the reference conditions. Similarly, control allows the voltage to be held at a stable value regardless of changes in the set point. This work presents a novel energy management scheme for permanent magnet electric drive based on a Model Predictive Control strategy, thus contributing to the effective energy management of a standard hybrid electric vehicle driving cycle. Results obtained using a real-time Hardware-in-the-Loop (HIL) platform showed the effectiveness of Model Predictive Control in dealing with power flow management while ensuring control of electric drive in all the required speed–torque profiles.
Open AccessNovel Energy Management Scheme for a Permanent Magnet Electric Drive-Based Hybrid Vehicle Using Model Predictive Control
The present work deals with the design of a traction system for a hybrid vehicle using a PMSM-type motor, including an energy regeneration stage, using a Neutral Point Piloted (NPP) inverter. Optimal operation allows the motor to be supplied in the traction stage with the correct energy in such a way that it operates properly; on the other hand, during braking, it facilitates the transfer of energy in regenerative mode to the DC bus, storing the greatest amount of energy in the storage elements, which, in this case, refers to a battery bank. It also includes a DC-DC bidirectional boost interleaved converter to regulate the DC voltage levels both in traction and in braking. Its fundamental characteristic is that with a reduced number of switching devices, it allows for the reduction in DC voltage of the DC bus with adequate characteristics, constant and stable, regardless of abrupt changes in the output voltage reference value. Also, other features include oscillation control, that is, reducing or increasing oscillations according to operating conditions. Its transient operation is excellent, since the settling time is considerably reduced, which implies that the voltage of the DC bus does not cause mishaps in the operation of the motor. In its operation as a boost converter, in the event of any voltage value of the DC bus, the converter raises the voltage value according to the reference conditions. Similarly, control allows the voltage to be held at a stable value regardless of changes in the set point. This work presents a novel energy management scheme for permanent magnet electric drive based on a Model Predictive Control strategy, thus contributing to the effective energy management of a standard hybrid electric vehicle driving cycle. Results obtained using a real-time Hardware-in-the-Loop (HIL) platform showed the effectiveness of Model Predictive Control in dealing with power flow management while ensuring control of electric drive in all the required speed–torque profiles.
- Open Access
- 8 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Analysis of a Gate-Driving Technique for Enhancing the GaN Power Transistors Performance
This paper presents an analysis of a gate-driving technique for enhancing the switching performance of gallium nitride (GaN) power transistors. The technique consists of modifying the Pulse Width Modulated (PWM) signal that is applied to the gate of transistors by using diodes and a totem pole circuit. As purpose of this technique is to control the turn-on and turnoff HEMT GaN transitions and reduce the oscillations caused by high-speed operation without increasing power losses. LTsipice is used for analyzing the gate driving technique by simulations considering models of commercial components. Simulation results show the viability of the proposed, which can reduce the ringing in the GaN transitions without affecting their performance.
- 8 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Open AccessAnalysis of a Gate-Driving Technique for Enhancing the GaN Power Transistors Performance
This paper presents an analysis of a gate-driving technique for enhancing the switching performance of gallium nitride (GaN) power transistors. The technique consists of modifying the Pulse Width Modulated (PWM) signal that is applied to the gate of transistors by using diodes and a totem pole circuit. As purpose of this technique is to control the turn-on and turnoff HEMT GaN transitions and reduce the oscillations caused by high-speed operation without increasing power losses. LTsipice is used for analyzing the gate driving technique by simulations considering models of commercial components. Simulation results show the viability of the proposed, which can reduce the ringing in the GaN transitions without affecting their performance.
- Open Access
- 7 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 8668-8699
Validation of Sliding Mode and Passivity Control in High-Power Quadratic Buck Converter Through Rapid Prototyping
This document introduces a rapid control prototyping (RCP) approach applied to the industrial sector using a non-linear Quadratic Buck Converter (QBC) DC-DC. The goal is to reduce manufacturing costs for materials and electronic devices while enhancing the power quality in the system’s response. An experimental setup is utilized to create a functional model, converting 380 VDC to 48 VDC at a power level of 500 W. dSPACE CP1103 is employed to implement Model in the Loop (MIL), Software in the Loop (SIL), and Hardware in the Loop (HIL) simulations. Modern control techniques, including sliding mode control (SMC) and passivity-based control (PBC), are employed to devise a robust control scheme capable of maintaining stability in real-time (RT) and resisting disturbances. The document concludes with a performance analysis, PI, Cp, CpK, Z-score, and ITAE considering response time, signal accuracy, system stability, and resource utilization efficiency.
- 7 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 8668-8699
Open AccessValidation of Sliding Mode and Passivity Control in High-Power Quadratic Buck Converter Through Rapid Prototyping
This document introduces a rapid control prototyping (RCP) approach applied to the industrial sector using a non-linear Quadratic Buck Converter (QBC) DC-DC. The goal is to reduce manufacturing costs for materials and electronic devices while enhancing the power quality in the system’s response. An experimental setup is utilized to create a functional model, converting 380 VDC to 48 VDC at a power level of 500 W. dSPACE CP1103 is employed to implement Model in the Loop (MIL), Software in the Loop (SIL), and Hardware in the Loop (HIL) simulations. Modern control techniques, including sliding mode control (SMC) and passivity-based control (PBC), are employed to devise a robust control scheme capable of maintaining stability in real-time (RT) and resisting disturbances. The document concludes with a performance analysis, PI, Cp, CpK, Z-score, and ITAE considering response time, signal accuracy, system stability, and resource utilization efficiency.
- Open Access
A Cooperative ADRC-Based Approach for Angular Velocity Synchronization and Load-Sharing in Servomechanisms
This paper is concerned with designing a dynamical synchronization (via a robust cooperative control) of an electromechanical system network (EMSN), consisting of nonidentical brushed DC motors, where only the motors’ angular velocity measurements are available. The challenge of the proposed approach is that the actuation provided by the motor needs to handle external disturbances to achieve the velocity tracking task and handle the interaction between both motors cooperatively to share the load and the disturbance rejection. The control’s basis involves differential flatness and an active disturbance rejection control (ADRC) framework augmented using ideas from the graph theory analysis and multi-agent networks. Experimental results verify the theoretical developments and show the effectiveness of the proposed control strategy despite unexpectedly changing load disturbance and parameters uncertainties. The proposed algorithm is suitable for embedded use due to its simplicity. It can be applied to a broad spectrum of mechatronic systems where dual-motor drive arrangements are necessary.
Open AccessA Cooperative ADRC-Based Approach for Angular Velocity Synchronization and Load-Sharing in Servomechanisms
This paper is concerned with designing a dynamical synchronization (via a robust cooperative control) of an electromechanical system network (EMSN), consisting of nonidentical brushed DC motors, where only the motors’ angular velocity measurements are available. The challenge of the proposed approach is that the actuation provided by the motor needs to handle external disturbances to achieve the velocity tracking task and handle the interaction between both motors cooperatively to share the load and the disturbance rejection. The control’s basis involves differential flatness and an active disturbance rejection control (ADRC) framework augmented using ideas from the graph theory analysis and multi-agent networks. Experimental results verify the theoretical developments and show the effectiveness of the proposed control strategy despite unexpectedly changing load disturbance and parameters uncertainties. The proposed algorithm is suitable for embedded use due to its simplicity. It can be applied to a broad spectrum of mechatronic systems where dual-motor drive arrangements are necessary.
- 17 May 2022
- Published by Wiley in International Journal of Circuit Theory and Applications
- Vol. 50 (9) , 3071-3085
SPICE synthesis of a solar cell model with irradiance and temperature evaluation
Summary: This manuscript resumes the synthesis of a reliable electrical solar cell model in LTspice. The model improves correspondence with the physical I‐V and P‐V behavior, evaluating the temperature and irradiance dependence with simple approximations. A few electrical parameters into script lines synthesize the nonlinear branch relationship of a voltage‐controlled current source. The LTspice model includes new factors to improve the irradiance and temperature variation evaluation, which is uniform among solar cells.The results exhibit an average error of less than seven percent in an open‐source SPICE solution, similar to cumbersome computational efforts. The SPICE model enables the design of photovoltaic systems taking into account the temperature and irradiance factors with electrical components.
- 17 May 2022
- Published by Wiley in International Journal of Circuit Theory and Applications
- Vol. 50 (9) , 3071-3085
SPICE synthesis of a solar cell model with irradiance and temperature evaluation
Summary: This manuscript resumes the synthesis of a reliable electrical solar cell model in LTspice. The model improves correspondence with the physical I‐V and P‐V behavior, evaluating the temperature and irradiance dependence with simple approximations. A few electrical parameters into script lines synthesize the nonlinear branch relationship of a voltage‐controlled current source. The LTspice model includes new factors to improve the irradiance and temperature variation evaluation, which is uniform among solar cells.The results exhibit an average error of less than seven percent in an open‐source SPICE solution, similar to cumbersome computational efforts. The SPICE model enables the design of photovoltaic systems taking into account the temperature and irradiance factors with electrical components.