TLTeresa Lopez-Leon

Teresa Lopez-Leon

*This is an algorithmically generated author record based on publicly available information.

Teresa Lopez-Leon has a total of 66 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Dynamics of Active Defects on the Anisotropic Surface of an Ellipsoidal Droplet

    by Martina Clairand, Ali Mozaffari, Jerôme Hardoüin, Rui Zhang, Claire Doré, Jordi Ignés-Mullol, Francesc Sagués, Juan J. de Pablo, Teresa Lopez-Leon

    We investigate the steady state of an ellipsoidal active nematic shell using experiments and numerical simulations. We create the shells by coating microsized ellipsoidal droplets with a protein-based active cytoskeletal gel, thus obtaining ellipsoidal core-shell structures. This system provides the appropriate conditions of confinement and geometry to investigate the impact of nonuniform curvature on an orderly active nematic fluid that features the minimum number of defects required by topology. We identify new time-dependent states where topological defects periodically oscillate between translational and rotational regimes, resulting in the spontaneous emergence of chirality. Our simulations of active nematohydrodynamics demonstrate that, beyond topology and activity, the dynamics of the active material are profoundly influenced by the local curvature and viscous anisotropy of the underlying droplet, as well as by external hydrodynamic forces stemming from the self-sustained rotational motion of defects. These results illustrate how the incorporation of curvature gradients into active nematic shells orchestrates remarkable spatiotemporal patterns, offering new insights into biological processes and providing compelling prospects for designing bioinspired micromachines. Published by the American Physical Society 2024


  • Open Access

    Spontaneous self-constraint in active nematic flows

    by Louise C. Head, Claire Doré, Ryan R. Keogh, Lasse Bonn, Giuseppe Negro, Davide Marenduzzo, Amin Doostmohammadi, Kristian Thijssen, Teresa López-León, Tyler N. Shendruk

    Active processes drive biological dynamics across various scales and include subcellular cytoskeletal remodelling, tissue development in embryogenesis and the population-level expansion of bacterial colonies. In each of these, biological functionality requires collective flows to occur while self-organised structures are protected. However, the mechanisms by which active flows can spontaneously constrain their dynamics to preserve structure are not known. Here, by studying collective flows and defect dynamics in active nematic films, we demonstrate the existence of a self-constraint, namely a two-way, spontaneously arising relationship between activity-driven isosurfaces of flow boundaries and mesoscale nematic structures. We show that self-motile defects are tightly constrained to viscometric surfaces, which are contours along which the vorticity and the strain rate are balanced. This in turn reveals that self-motile defects break mirror symmetry when they move along a single viscometric surface. This is explained by an interdependence between viscometric surfaces and bend walls, which are elongated narrow kinks in the orientation field. These findings indicate that defects cannot be treated as solitary points. Instead, their associated mesoscale deformations are key to the steady-state coupling to hydrodynamic flows. This mesoscale cross-field self-constraint offers a framework for tackling complex three-dimensional active turbulence, designing dynamic control into biomimetic materials and understanding how biological systems can employ active stress for dynamic self-organisation.


  • Helfrich-Hurault elastic instabilities driven by geometrical frustration

    by Christophe Blanc, Guillaume Durey, Randall D. Kamien, Teresa Lopez-Leon, Maxim O. Lavrentovich, Lisa Tran

    The Helfrich-Hurault (HH) elastic instability is a well-known mechanism behind patterns that form as a result of strain upon liquid crystal systems with periodic ground states. In the HH model, layered structures undulate and buckle in response to local, geometric incompatibilities in order to maintain the preferred layer spacing. Classic HH systems include cholesteric liquid crystals under electromagnetic field distortions and smectic liquid crystals under mechanical strains, where both materials are confined between rigid substrates. However, richer phenomena are observed when undulation instabilities occur in the presence of deformable interfaces and variable boundary conditions. Understanding how the HH instability is affected by deformable surfaces is imperative for applying the instability to a broader range of materials. In this review, the HH mechanism is reexamined and special focus is given to how the boundary conditions influence the response of lamellar systems to geometrical frustration. Lamellar liquid crystals confined within a spherical shell geometry are used as the model system. Made possible by the relatively recent advances in microfluidics within the past 15 years, liquid crystal shells are composed entirely of fluid interfaces and have boundary conditions that can be dynamically controlled at will. Past and recent work that exemplifies how topological constraints, molecular anchoring conditions, and boundary curvature can trigger the HH mechanism in liquid crystals with periodic ground states is examined. The review ends by identifying similar phenomena across a wide variety of materials, both biological and synthetic. The fact that the HH mechanism is a generic and often overlooked response of periodic materials to geometrical frustration is highlighted.


  • Open Access

    Dynamics of active defects on the anisotropic surface of an ellipsoidal droplet

    by Martina Clairand, Ali Mozaffari, Jérôme Hardoüin, Rui Zhang, Claire Doré, Jordi Ignés-Mullol, Francesc Sagués, Juan J. de Pablo, Teresa Lopez-Leon

    Cells are fundamental building blocks of living organisms displaying an array of shapes, morphologies, and textures that encode specific functions and physical behaviors. Elucidating the rules of this code remains a challenge. In this work, we create biomimetic structural building blocks by coating ellipsoidal droplets of a smectic liquid crystal with a protein-based active cytoskeletal gel, thus obtaining core-shell structures. By exploiting the patterned texture and anisotropic shape of the smectic core, we were able to mold the complex nematodynamics of the interfacial active material and identify new time-dependent states where topological defects periodically oscillate between rotational and translational regimes. Our nemato-hydrodynamic simulations of active nematics demonstrate that, beyond topology and activity, the dynamics of the active material are profoundly influenced by the local curvature and smectic texture of the droplet, as well as by external hydrodynamic forces. These results illustrate how the incorporation of these constraints into active nematic shells orchestrates remarkable spatio-temporal motifs, offering critical new insights into biological processes and providing compelling prospects for designing bio-inspired micro-machines.

  • Open Access

    Active boundary layers in confined active nematics

    by Jerôme Hardoüin, Claire Doré, Justine Laurent, Teresa Lopez-Leon, Jordi Ignés-Mullol, Francesc Sagués

    The role of boundary layers in conventional liquid crystals is commonly related to the mesogen anchoring on confining walls. In the classical view, anchoring enslaves the orientational field of the passive material under equilibrium conditions. In this work, we show that an active nematic can develop active boundary layers that topologically polarize the confining walls. We find that negatively-charged defects accumulate in the boundary layer, regardless of the wall curvature, and they influence the overall dynamics of the system to the point of fully controlling the behavior of the active nematic in situations of strong confinement. Further, we show that wall defects exhibit behaviors that are essentially different from those of their bulk counterparts, such as high motility or the ability to recombine with another defect of like-sign topological charge. These exotic behaviors result from a change of symmetry induced by the wall in the director field around the defect. Finally, we suggest that the collective dynamics of wall defects might be described in terms of a model equation for one-dimensional spatio-temporal chaos.


  • Open Access

    Frustrated ‘run and tumble’ of swimming Escherichia coli bacteria in nematic liquid crystals

    by Martyna Goral, Eric Clement, Thierry Darnige, Teresa Lopez-Leon, Anke Lindner

    In many situations, bacteria move in complex environments, as soils, oceans or the human gut-track, where carrier fluids show complex structures associated with non-Newtonian rheology. Many fundamental questions concerning the ability to navigate in such environments remain unsolved. Recently, it has been shown that the kinetics of bacterial motion in structured fluids as liquid crystals (LCs) is constrained by the orientational molecular order (or director field) and that novel spatio-temporal patterns arise. A question unaddressed so far is how bacteria change swimming direction in such an environment. In this work, we study the swimming mechanism of a single bacterium, Esherichia coli , constrained to move along the director field of a lyotropic chromonic liquid crystal confined to a planar cell. Here, the spontaneous ‘run and tumble’ motion of the bacterium gets frustrated: the elasticity of the LC prevents flagella from unbundling. Interestingly, to change direction, bacteria execute a reversal motion along the director field, driven by the relocation of a single flagellum, a ‘frustrated tumble’. We characterize this phenomenon in detail experimentally, exploiting exceptional spatial and temporal resolution of bacterial and flagellar dynamics, using a two colour Lagrangian tracking technique. We suggest a possible mechanism accounting for these observations.


  • Elastic Instability of Cubic Blue Phase Nano Crystals in Curved Shells

    by Sepideh Norouzi, Antonio Tavera-Vazquez, Johanan Ramirez-De Arellano, Dae Seok Kim, Teresa Lopez-Leon, Juan J. de Pablo, Jose A. Martinez-Gonzalez, Monirosadat Sadati

    Many crystallization processes, including biomineralization and ice-freezing, occur in small and curved volumes, where surface curvature can strain the crystal, leading to unusual configurations and defect formation. The role of curvature on crystallization, however, remains poorly understood. Here, we study the crystallization of blue phase (BP) liquid crystals under curved confinement, which provides insights into the mechanism by which BPs reconfigure their three-dimensional lattice structure to adapt to curvature. BPs are a three-dimensional assembly of high-chirality liquid crystal molecules arranged into body-centered (BPI) or simple cubic (BPII) symmetries. BPs with submicrometer cubic-crystalline lattices exhibit tunable Bragg reflection and submillisecond response time to external stimuli such as an electric field, making them attractive for advanced photonic materials. In this work, we have systematically studied BPs confined in spherical shells with well-defined curvature and boundary conditions. The optical behavior of shells has also been examined at room temperature, where the cholesteric structure forms. In the cholesteric phase, perpendicular anchoring generates focal conic domains on the shell's surface, which transition into stripe patterns as the degree of curvature increases. Our results demonstrate that both higher degrees of curvature and strong spatial confinement destabilize BPI and reconfigure that phase to adopt the structure and optical features of BPII. We also show that the coupling of curvature and confinement nucleates skyrmions at greater thicknesses than those observed for a flat geometry. These findings are particularly important for integrating BPs into miniaturized and curved/flexible devices, including flexible displays, wearable sensors, and smart fabrics.


  • From nematic shells to nematic droplets: energetics and defect transitions

    by Kunyun He, Ye Zhou, Hadi Ramezani-Dakhel, Juan J. de Pablo, Alberto Fernandez-Nieves, Teresa Lopez-Leon

    In this work, we investigate the possibility of inducing valence transitions, i.e. transitions between different defect configurations, by transforming a nematic shell into a nematic droplet. Our shells are liquid crystal droplets containing a smaller aqueous droplet inside, which are suspended in an aqueous phase. When osmotically de-swelling the inner droplet, the shell progressively increases its thickness until it eventually becomes a single droplet. During the process, the shell energy landscape evolves, triggering a response in the system. We observe two different scenarios. Either the inner droplet progressively shrinks and disappears, inducing a defect reorganization, or it is expelled from the shell at a critical radius of the inner droplet, abruptly changing the geometry of the system. We use numerical simulations and modeling to investigate the origin of these behaviors. We find that the selected route depends on the defect structure and the energetics of the system as it evolves. The critical inner radius and time for expulsion depend on the osmotic pressure of the outer phase, suggesting that the flow through the shell plays a role in the process.


  • Active microfluidic transport in two-dimensional handlebodies

    by Jérôme Hardoüin, Justine Laurent, Teresa Lopez-Leon, Jordi Ignés-Mullol, Francesc Sagués

    An active nematic confined in microfluidic annuli features symmetry breaking, synchronization or frustration depending on the channel topology.


  • Temperature-Driven Anchoring Transitions at Liquid Crystal/Water Interfaces

    by Guillaume Durey, Yoko Ishii, Teresa Lopez-Leon

    Controlling the anchoring of liquid crystal molecules at an interface with a water solution influences the entire organization of the underlying liquid crystal phase, which is crucial for many applications. The simplest way to stabilize such interfaces is by fabricating droplets of liquid crystal in water; however, a greater sensitivity to interfacial effects can be achieved using liquid crystal shells, i.e. spherical films of liquid crystal suspended in water. Anchoring transitions on those systems are traditionally triggered by the adsorption of surfactant molecules onto the interface, which is neither an instantaneous nor a reversible process. In this study, we report the ability to change the anchoring of 4-cyano-4'-pentylbiphenyl (5CB), one of the most widely used liquid crystals, at the interface with dilute water solutions of polyvinyl alcohol (PVA), a polymer commonly used for stabilizing liquid crystal shells, simply by controlling the temperature in the close vicinity of the liquid crystal clearing point. A quasi-static increase in temperature triggers an instantaneous reorientation of the molecules from parallel to perpendicular to the interfaces, owing to the local disordering effect of PVA on 5CB, prior to the phase transition of the bulk 5CB. We study this anchoring transition on both flat suspended films and spherical shells of liquid crystals. Switching anchoring entails a series of structural transformations involving the formation of transient structures in which topological defects are stabilized. The type of defect structure depends on the topology of the film. This method has the ability to influence both interfaces of the film nearly at the same time, and can be applied to transform an initially polydisperse group of nematic shells into a monodisperse population of bivalent shells.