Fanqi Kong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Fanqi Kong has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
Jianping Yao
Microwave Photonics Research Laboratory, University of Ottawa, Ottawa, ON, Canada
6 shared publicationsWangzhe Li
Microwave Photonics Research Laboratory, University of Ottawa, Ottawa, ON, Canada
5 shared publications- Bruno Romeira
International Iberian Nanotechnology Laboratory
3 shared publications Dong Hyuk Ko
Department of Physics, University of Ottawa, 25 Templeton St, Ottawa, Ontario, Canada K1N 6N5
2 shared publications- Jiejun Zhang
Jinan University
2 shared publications - Jose M. L. Figueiredo
Universidade de Lisboa
2 shared publications
Latest Publications
- Top Cited PapersOpen Access
- 5 April 2017
- Published by Springer Nature in Nature Communications
- Vol. 8 (1) , 14970
Controlling the orbital angular momentum of high harmonic vortices
Optical vortices, which carry orbital angular momentum (OAM), can be flexibly produced and measured with infrared and visible light. Their application is an important research topic for super-resolution imaging, optical communications and quantum optics. However, only a few methods can produce OAM beams in the extreme ultraviolet (XUV) or X-ray, and controlling the OAM on these beams remains challenging. Here we apply wave mixing to a tabletop high-harmonic source, as proposed in our previous work, and control the topological charge (OAM value) of XUV beams. Our technique enables us to produce first-order OAM beams with the smallest possible central intensity null at XUV wavelengths. This work opens a route for carrier-injected laser machining and lithography, which may reach nanometre or even angstrom resolution. Such a light source is also ideal for space communications, both in the classical and quantum regimes.
- 5 April 2017
- Published by Springer Nature in Nature Communications
- Vol. 8 (1) , 14970
Top Cited PapersOpen AccessControlling the orbital angular momentum of high harmonic vortices
Optical vortices, which carry orbital angular momentum (OAM), can be flexibly produced and measured with infrared and visible light. Their application is an important research topic for super-resolution imaging, optical communications and quantum optics. However, only a few methods can produce OAM beams in the extreme ultraviolet (XUV) or X-ray, and controlling the OAM on these beams remains challenging. Here we apply wave mixing to a tabletop high-harmonic source, as proposed in our previous work, and control the topological charge (OAM value) of XUV beams. Our technique enables us to produce first-order OAM beams with the smallest possible central intensity null at XUV wavelengths. This work opens a route for carrier-injected laser machining and lithography, which may reach nanometre or even angstrom resolution. Such a light source is also ideal for space communications, both in the classical and quantum regimes.
- Open Access
- 20 January 2017
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 118 (3) , 033905
Perturbative High Harmonic Wave Front Control
We pattern the wave front of a high harmonic beam by intersecting the intense driving laser pulse that generates the high harmonic with a weak control pulse. To illustrate the potential of wave-front control, we imprint a Fresnel zone plate pattern on a harmonic beam, causing the harmonics to focus and defocus. The quality of the focus that we achieve is measured using the spectral wave-front optical reconstruction by diffraction method. We will show that it is possible to enhance the peak intensity by orders of magnitude without a physical optical element in the path of the extreme ultraviolet (XUV) beam. Through perturbative wave-front control, XUV beams can be created with a flexibility approaching what technology allows for visible and infrared light.
- 20 January 2017
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 118 (3) , 033905
Open AccessPerturbative High Harmonic Wave Front Control
We pattern the wave front of a high harmonic beam by intersecting the intense driving laser pulse that generates the high harmonic with a weak control pulse. To illustrate the potential of wave-front control, we imprint a Fresnel zone plate pattern on a harmonic beam, causing the harmonics to focus and defocus. The quality of the focus that we achieve is measured using the spectral wave-front optical reconstruction by diffraction method. We will show that it is possible to enhance the peak intensity by orders of magnitude without a physical optical element in the path of the extreme ultraviolet (XUV) beam. Through perturbative wave-front control, XUV beams can be created with a flexibility approaching what technology allows for visible and infrared light.
- 2 December 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 33 (2) , 503-510
High-Speed Spiking and Bursting Oscillations in a Long-Delayed Broadband Optoelectronic Oscillator
We investigate the generation of high-speed spiking and bursting signals in a long time-delayed broadband optoelectronic oscillator (OEO). The OEO is configured in a delayed feedback loop employing a long optical fiber delay line and other elements including a tunable laser, a phase modulator (PM) and a linearly chirped fiber Bragg grating (LCFBG), a photodetector, and an electrical amplifier. The joint operation of the PM and the LCFBG forms an ultrawideband microwave photonic filter (MFP). Taking advantage of the multiple time scales arising from the MPF and the long optical fiber delay line, we are able to generate subnanosecond neuron-like spiking and bursting signals that emulate the response found to be the primary mode of electrical firing in biological neurons. Since our OEO can operate at a much higher speed and can be controlled using both time-delayed feedback employing low-loss optical fiber and electrical/optical injection locking techniques, it has interest in emerging photonics applications such as neuromorphic information processing and reservoir computing tasks.
- 2 December 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 33 (2) , 503-510
High-Speed Spiking and Bursting Oscillations in a Long-Delayed Broadband Optoelectronic Oscillator
We investigate the generation of high-speed spiking and bursting signals in a long time-delayed broadband optoelectronic oscillator (OEO). The OEO is configured in a delayed feedback loop employing a long optical fiber delay line and other elements including a tunable laser, a phase modulator (PM) and a linearly chirped fiber Bragg grating (LCFBG), a photodetector, and an electrical amplifier. The joint operation of the PM and the LCFBG forms an ultrawideband microwave photonic filter (MFP). Taking advantage of the multiple time scales arising from the MPF and the long optical fiber delay line, we are able to generate subnanosecond neuron-like spiking and bursting signals that emulate the response found to be the primary mode of electrical firing in biological neurons. Since our OEO can operate at a much higher speed and can be controlled using both time-delayed feedback employing low-loss optical fiber and electrical/optical injection locking techniques, it has interest in emerging photonics applications such as neuromorphic information processing and reservoir computing tasks.
- 1 October 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 32 (20) , 3933-3942
Broadband Chaotic Signals and Breather Oscillations in an Optoelectronic Oscillator Incorporating a Microwave Photonic Filter
We propose a technique to generate broadband chaotic and breather signals employing an optoelectronic oscillator (OEO) comprising a phase modulator (PM) and a linearly chirped fiber Bragg grating (LCFBG). The joint operation of the PM and the LCFBG forms a broadband microwave photonic filter (MPF), which allows the OEO to generate chaotic signals and breathers taking advantage of the interplay between the broadband MPF and the time-delayed feedback loop provided by a long optical fiber delay line. The breather excitations are characterized by nanosecond chaotic oscillations breathing periodically at a significantly lower time-scale determined by the OEO large delay time. A theoretical analysis based on a modified Ikeda time-delayed model to include the effect of the broadband filtering process is provided. The analysis is verified by an experiment. The proposed LCFBG-based OEO and the possibility to control in the optical domain its broadband bandpass characteristics considering the flexibility, accuracy, and precision in FBG fabrication can find applications in chaos-based communications and in fast optical processing systems, such as random number generation, or optical processing in reservoir computing taking advantage of the intrinsic multiple time scales of the LCFBG-based OEO.
- 1 October 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 32 (20) , 3933-3942
Broadband Chaotic Signals and Breather Oscillations in an Optoelectronic Oscillator Incorporating a Microwave Photonic Filter
We propose a technique to generate broadband chaotic and breather signals employing an optoelectronic oscillator (OEO) comprising a phase modulator (PM) and a linearly chirped fiber Bragg grating (LCFBG). The joint operation of the PM and the LCFBG forms a broadband microwave photonic filter (MPF), which allows the OEO to generate chaotic signals and breathers taking advantage of the interplay between the broadband MPF and the time-delayed feedback loop provided by a long optical fiber delay line. The breather excitations are characterized by nanosecond chaotic oscillations breathing periodically at a significantly lower time-scale determined by the OEO large delay time. A theoretical analysis based on a modified Ikeda time-delayed model to include the effect of the broadband filtering process is provided. The analysis is verified by an experiment. The proposed LCFBG-based OEO and the possibility to control in the optical domain its broadband bandpass characteristics considering the flexibility, accuracy, and precision in FBG fabrication can find applications in chaos-based communications and in fast optical processing systems, such as random number generation, or optical processing in reservoir computing taking advantage of the intrinsic multiple time scales of the LCFBG-based OEO.
- 18 August 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 32 (21) , 4174-4179
Stable and Frequency-Hopping-Free Microwave Generation Based on a Mutually Injection-Locked Optoelectronic Oscillator and a Dual-Wavelength Single-Longitudinal-Mode Fiber Laser
We report a novel method to generate a stable and frequency-hopping-free microwave signal based on a mutually injection-locked dual-wavelength single-longitudinal-mode fiber laser and an optoelectronic oscillator (OEO), with the mutual injection locking realized by sharing an optical path consisting of a polarization modulator and a polarization-maintaining phase-shifted fiber Bragg grating. The two wavelengths from the fiber laser are injected into the OEO to lock the generated microwave signal, while the microwave signal from the OEO is fed back into the fiber laser to injection lock the two wavelengths. Thanks to the mutual injection locking, the operation stability of the fiber laser and the OEO are substantially improved. A microwave signal at 11.8 GHz with a phase noise of -105 dBc/Hz at a 10-kHz offset frequency is generated. A stable operation of the system without frequency shifting and hopping is demonstrated.
- 18 August 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 32 (21) , 4174-4179
Stable and Frequency-Hopping-Free Microwave Generation Based on a Mutually Injection-Locked Optoelectronic Oscillator and a Dual-Wavelength Single-Longitudinal-Mode Fiber Laser
We report a novel method to generate a stable and frequency-hopping-free microwave signal based on a mutually injection-locked dual-wavelength single-longitudinal-mode fiber laser and an optoelectronic oscillator (OEO), with the mutual injection locking realized by sharing an optical path consisting of a polarization modulator and a polarization-maintaining phase-shifted fiber Bragg grating. The two wavelengths from the fiber laser are injected into the OEO to lock the generated microwave signal, while the microwave signal from the OEO is fed back into the fiber laser to injection lock the two wavelengths. Thanks to the mutual injection locking, the operation stability of the fiber laser and the OEO are substantially improved. A microwave signal at 11.8 GHz with a phase noise of -105 dBc/Hz at a 10-kHz offset frequency is generated. A stable operation of the system without frequency shifting and hopping is demonstrated.
- 26 June 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 32 (17) , 2996-3001
Microwave Photonic Hilbert Transformer Based on a Single Passband Microwave Photonic Filter for Simultaneous Channel Selection and Signal Processing
A microwave photonic Hilbert transformer (MPHT) with a single passband and wide frequency tunable range based on a single passband microwave photonic filter (MPF) is proposed and experimentally demonstrated. The MPF is implemented using a broadband light source and a Mach-Zehnder interferometer (MZI) incorporating a phase modulator in one arm and a phase-shifted chirped fiber Bragg grating in the other arm. The optical signal at the output of the MZI is sent to a dispersion compensating fiber, and then, detected at a photodetector. The overall operation corresponds to a single passband MPF with a π phase-shift at the center of the passband, which has the frequency response corresponding to a microwave Hilbert transformer. The central frequency of the MPHT can be continuously tuned by tuning the length difference between the two arms of the MZI using a tunable delay line. A theoretical analysis is performed, which is verified by simulations and an experiment. In the experiment, an MPHT with a bandwidth of 1.70 GHz and a continuously tunable frequency from 5 to 15 GHz is demonstrated. The proposed MPHT can find applications in multi-channel microwave communications systems, where simultaneous channel selection and Hilbert transformation are needed.
- 26 June 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 32 (17) , 2996-3001
Microwave Photonic Hilbert Transformer Based on a Single Passband Microwave Photonic Filter for Simultaneous Channel Selection and Signal Processing
A microwave photonic Hilbert transformer (MPHT) with a single passband and wide frequency tunable range based on a single passband microwave photonic filter (MPF) is proposed and experimentally demonstrated. The MPF is implemented using a broadband light source and a Mach-Zehnder interferometer (MZI) incorporating a phase modulator in one arm and a phase-shifted chirped fiber Bragg grating in the other arm. The optical signal at the output of the MZI is sent to a dispersion compensating fiber, and then, detected at a photodetector. The overall operation corresponds to a single passband MPF with a π phase-shift at the center of the passband, which has the frequency response corresponding to a microwave Hilbert transformer. The central frequency of the MPHT can be continuously tuned by tuning the length difference between the two arms of the MZI using a tunable delay line. A theoretical analysis is performed, which is verified by simulations and an experiment. In the experiment, an MPHT with a bandwidth of 1.70 GHz and a continuously tunable frequency from 5 to 15 GHz is demonstrated. The proposed MPHT can find applications in multi-channel microwave communications systems, where simultaneous channel selection and Hilbert transformation are needed.
- 13 March 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 32 (9) , 1784-1793
A Dual-Wavelength Fiber Ring Laser Incorporating an Injection-Coupled Optoelectronic Oscillator and Its Application to Transverse Load Sensing
A novel configuration for a dual-wavelength fiber ring laser with improved lasing stability realized through the use of an injection-coupled optoelectronic oscillator (OEO) is proposed and demonstrated, and its application to transverse load sensing is studied. The OEO-coupled dual-wavelength laser has two mutually coupled loops: the fiber ring loop and the OEO loop. In the fiber ring loop, a polarization-maintaining phase-shifted fiber Bragg grating is incorporated to generate two optical wavelengths with the wavelength spacing determined by the birefringence of the polarization-maintaining (PM) fiber. In the OEO loop, a microwave signal with its frequency also determined by the birefringence of the PM fiber is generated, which is fed into the fiber ring loop to injection lock the dual wavelengths. Due to the injection locking, a very stable dual-wavelength operation is established. The use of the dual wavelengths for high-resolution and high-speed transverse load sensing is then implemented. The sensitivity of the transverse load sensor is measured as high as +9.7573 and -9.7350 GHz/(N/mm), along the fast and slow axes, respectively. The high frequency purity and stability of the generated microwave signal permits very reliable and high accuracy measurement and the microwave frequency interrogation allows the system to operate at an ultra-high speed.
- 13 March 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 32 (9) , 1784-1793
A Dual-Wavelength Fiber Ring Laser Incorporating an Injection-Coupled Optoelectronic Oscillator and Its Application to Transverse Load Sensing
A novel configuration for a dual-wavelength fiber ring laser with improved lasing stability realized through the use of an injection-coupled optoelectronic oscillator (OEO) is proposed and demonstrated, and its application to transverse load sensing is studied. The OEO-coupled dual-wavelength laser has two mutually coupled loops: the fiber ring loop and the OEO loop. In the fiber ring loop, a polarization-maintaining phase-shifted fiber Bragg grating is incorporated to generate two optical wavelengths with the wavelength spacing determined by the birefringence of the polarization-maintaining (PM) fiber. In the OEO loop, a microwave signal with its frequency also determined by the birefringence of the PM fiber is generated, which is fed into the fiber ring loop to injection lock the dual wavelengths. Due to the injection locking, a very stable dual-wavelength operation is established. The use of the dual wavelengths for high-resolution and high-speed transverse load sensing is then implemented. The sensitivity of the transverse load sensor is measured as high as +9.7573 and -9.7350 GHz/(N/mm), along the fast and slow axes, respectively. The high frequency purity and stability of the generated microwave signal permits very reliable and high accuracy measurement and the microwave frequency interrogation allows the system to operate at an ultra-high speed.
- 24 October 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 31 (23) , 3780-3786
Arbitrary Microwave Waveform Generation Based on a Tunable Optoelectronic Oscillator
Photonic generation of a phase-coded or frequency-chirped microwave waveform with a tunable microwave carrier frequency using a frequency-tunable optoelectronic oscillator (OEO) is proposed and experimentally demonstrated, for the first time to the best of our knowledge. In the proposed system, the tunable OEO has functions to generate a frequency-tunable microwave signal and to output an optical sideband. The optical sideband and a portion of the light wave from the OEO laser source are sent to a polarization modulator (PolM), with their polarization directions aligned with the two principal axes of the PolM. An electrical signal is applied to the PolM, and two complementary phase-coded or frequency-chirped light waves are generated which are converted to an electrical signal by beating the light waves at a high-speed photodetector. The key significance of the technique is that a phase-coded or frequency-chirped microwave waveform with a tunable microwave carrier frequency and a reconfigurable phase-coding or frequency-chirping pattern can be generated without using a separate microwave source. The technique is experimentally verified. The generation of a binary- and a polyphase-coded microwave waveform with a microwave carrier frequency at 10 and 15 GHz is demonstrated. The generation of a linearly frequency-chirped microwave waveform with a chip rate of 20.98 GHz/ns at a 10-GHz carrier frequency and 22.5 GHz/ns at a 15-GHz carrier frequency is also achieved.
- 24 October 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 31 (23) , 3780-3786
Arbitrary Microwave Waveform Generation Based on a Tunable Optoelectronic Oscillator
Photonic generation of a phase-coded or frequency-chirped microwave waveform with a tunable microwave carrier frequency using a frequency-tunable optoelectronic oscillator (OEO) is proposed and experimentally demonstrated, for the first time to the best of our knowledge. In the proposed system, the tunable OEO has functions to generate a frequency-tunable microwave signal and to output an optical sideband. The optical sideband and a portion of the light wave from the OEO laser source are sent to a polarization modulator (PolM), with their polarization directions aligned with the two principal axes of the PolM. An electrical signal is applied to the PolM, and two complementary phase-coded or frequency-chirped light waves are generated which are converted to an electrical signal by beating the light waves at a high-speed photodetector. The key significance of the technique is that a phase-coded or frequency-chirped microwave waveform with a tunable microwave carrier frequency and a reconfigurable phase-coding or frequency-chirping pattern can be generated without using a separate microwave source. The technique is experimentally verified. The generation of a binary- and a polyphase-coded microwave waveform with a microwave carrier frequency at 10 and 15 GHz is demonstrated. The generation of a linearly frequency-chirped microwave waveform with a chip rate of 20.98 GHz/ns at a 10-GHz carrier frequency and 22.5 GHz/ns at a 15-GHz carrier frequency is also achieved.
- 15 July 2013
- Published by Optica Publishing Group in Optics Letters
- Vol. 38 (14) , 2611-2613
Transverse load sensing based on a dual-frequency optoelectronic oscillator
We propose and experimentally demonstrate a fiber-optic sensor implemented based on a dual-frequency optoelectronic oscillator (OEO) for transverse load sensing. In the OEO loop, a phase-shifted fiber Bragg grating (PS-FBG) is employed to which a transverse load is applied to introduce a birefringence to create two orthogonally polarized notches, which leads to the generation of two oscillating frequencies. The beat frequency between the two oscillating frequencies is a function of the load force applied to the PS-FBG. The proposed sensor is experimentally demonstrated. The sensitivity and the minimal detectable load are measured to be as high as and , respectively. The high-frequency purity and stability of the generated microwave signal by the OEO permit extremely reliable and high-accuracy measurement. The frequency interrogation allows the system to operate at an ultra-high speed. In addition, the sensing signal is insensitive to the variations of both the environmental temperature and the optical carrier wavelength.- 15 July 2013
- Published by Optica Publishing Group in Optics Letters
- Vol. 38 (14) , 2611-2613
Transverse load sensing based on a dual-frequency optoelectronic oscillator
We propose and experimentally demonstrate a fiber-optic sensor implemented based on a dual-frequency optoelectronic oscillator (OEO) for transverse load sensing. In the OEO loop, a phase-shifted fiber Bragg grating (PS-FBG) is employed to which a transverse load is applied to introduce a birefringence to create two orthogonally polarized notches, which leads to the generation of two oscillating frequencies. The beat frequency between the two oscillating frequencies is a function of the load force applied to the PS-FBG. The proposed sensor is experimentally demonstrated. The sensitivity and the minimal detectable load are measured to be as high as and , respectively. The high-frequency purity and stability of the generated microwave signal by the OEO permit extremely reliable and high-accuracy measurement. The frequency interrogation allows the system to operate at an ultra-high speed. In addition, the sensing signal is insensitive to the variations of both the environmental temperature and the optical carrier wavelength.