Luca Savio
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Luca Savio has a total of 41 co-authors. Here are the top co-authors by number of shared publications:
- Andreas T. Echtermeyer
Department of Mechanical and Industrial Engineering, Norwegian University of Science and Technology, 7034 Trondheim, Norway
2 shared publications - Nils Petter Vedvik
Department of Mechanical and Industrial Engineering, Norwegian University of Science and Technology, 7034 Trondheim, Norway
2 shared publications - Sondre Østli Rokvam
Department of Mechanical and Industrial Engineering (MTP), Norwegian University of Science and Technology (NTNU), 7491 Trondheim, Norway
2 shared publications - Afaq Ahmed Abbasi
Northwestern Polytechnical University
1 shared publication Aldo Gargiulo
Virginia Tech, Blacksburg, VA, USA
1 shared publicationAlessandro Bermond Des Ambrois
Private practice, Ivrea, Italy
1 shared publication
Latest Publications
- Open Access
- 15 April 2026
- Published by Wroclaw Medical University in Dental and Medical Problems
- Vol. 63 (2) , 295-302
Effect of a platform switch and a laser-microgrooved coronal design on short dental implants: A multicenter retrospective study
The presence of severe atrophy in proximity to the maxillary sinus or the inferior alveolar nerve is a primary indication for the use of short dental implants. The placement of standard-length implants in such cases often requires complex regenerative procedures, leading to prolonged healing time and an increased invasiveness of the surgical procedure. The aim of the study was to evaluate crestal bone remodeling, implant success, complications, and implantand patient-related risk factors associated with the use of short, platform-switched dental implants with a laser-microgrooved collar for prosthetic rehabilitation of atrophic posterior jaws. This multicenter retrospective study involved a chart review of medical records from 5 private dental clinics. Variables such as age, sex, smoking, periodontal disease, systemic diseases, medications, anatomical location, implant diameter and length, crown-to-implant ratio, and type of placement were collected. A total of 132 short implants placed in 84 patients were analyzed, with a follow-up of 3-5 years (mean (M): 4.2 ±0.8 years). Eight short implants failed, including 62.5% of those affected by peri-implantitis. The implantlevel and patient-level success rates were 93.9% and 95.0%, respectively. The mean crestal bone loss (CBL) was 0.385 ±0.7 mm. Univariate regression analysis revealed that female sex, smoking status and periodontal disease were significantly associated with implant success at both the implant and patient levels. Platform-switched short implants with a laser-microgrooved coronal design demonstrated high success rates in atrophic posterior jaws after 3-5 years of function, with stable crestal bone levels.
- 15 April 2026
- Published by Wroclaw Medical University in Dental and Medical Problems
- Vol. 63 (2) , 295-302
Open AccessEffect of a platform switch and a laser-microgrooved coronal design on short dental implants: A multicenter retrospective study
The presence of severe atrophy in proximity to the maxillary sinus or the inferior alveolar nerve is a primary indication for the use of short dental implants. The placement of standard-length implants in such cases often requires complex regenerative procedures, leading to prolonged healing time and an increased invasiveness of the surgical procedure. The aim of the study was to evaluate crestal bone remodeling, implant success, complications, and implantand patient-related risk factors associated with the use of short, platform-switched dental implants with a laser-microgrooved collar for prosthetic rehabilitation of atrophic posterior jaws. This multicenter retrospective study involved a chart review of medical records from 5 private dental clinics. Variables such as age, sex, smoking, periodontal disease, systemic diseases, medications, anatomical location, implant diameter and length, crown-to-implant ratio, and type of placement were collected. A total of 132 short implants placed in 84 patients were analyzed, with a follow-up of 3-5 years (mean (M): 4.2 ±0.8 years). Eight short implants failed, including 62.5% of those affected by peri-implantitis. The implantlevel and patient-level success rates were 93.9% and 95.0%, respectively. The mean crestal bone loss (CBL) was 0.385 ±0.7 mm. Univariate regression analysis revealed that female sex, smoking status and periodontal disease were significantly associated with implant success at both the implant and patient levels. Platform-switched short implants with a laser-microgrooved coronal design demonstrated high success rates in atrophic posterior jaws after 3-5 years of function, with stable crestal bone levels.
- Open Access
- 2 December 2024
- Published by Elsevier in Ocean Engineering
- Vol. 316
Experimental study of bubble cavitation on a NACA 0015 hydrofoil by a computer vision approach
- 2 December 2024
- Published by Elsevier in Ocean Engineering
- Vol. 316
Open AccessExperimental study of bubble cavitation on a NACA 0015 hydrofoil by a computer vision approach
- Open Access
- 6 September 2024
- Published by Springer Nature in Experiments in Fluids
- Vol. 65 (9) , 1-23
Profilometry: a non-intrusive active stereo-vision technique for wave-profile measurements in large hydrodynamic laboratories
Profilometry is proposed as a novel non-intrusive image-based technique to capture the profile of the air–water interface as a dense point cloud. It can be classified as an active stereo-vision method applied to the study of gravity-driven water waves and specifically developed to be used in large hydrodynamic laboratories. As an active vision technique, it relies on the use of light sources, and as a stereo technique, it requires one or more high-speed camera pairs for imaging the same scene synchronously. To enhance the visibility of the laser lights on the wave profile, the water surface is sprayed with water droplets. Profilometry, compared to standard wave probes, can be considered as an alternative source of information that can augment spatial resolution to the identification of the air–water interface to capture nonlinear wave-evolution mechanisms and violent wave–body interactions. Its feasibility and accuracy are examined preliminarily in a small-scale flume and then in a large-scale towing tank using long-crested wave scenarios, including regular, irregular, and focused gravity-driven waves, without the presence of a structure. The values of the wave steepness examined were various and included also quite steep cases with nearly vertical wave fronts. Role played by parameters of the technique, as well as of its setup in capturing the wave features are also analysed, with the aim to provide a useful guidance for other researchers that intent to use and develop further this approach.
- 6 September 2024
- Published by Springer Nature in Experiments in Fluids
- Vol. 65 (9) , 1-23
Open AccessProfilometry: a non-intrusive active stereo-vision technique for wave-profile measurements in large hydrodynamic laboratories
Profilometry is proposed as a novel non-intrusive image-based technique to capture the profile of the air–water interface as a dense point cloud. It can be classified as an active stereo-vision method applied to the study of gravity-driven water waves and specifically developed to be used in large hydrodynamic laboratories. As an active vision technique, it relies on the use of light sources, and as a stereo technique, it requires one or more high-speed camera pairs for imaging the same scene synchronously. To enhance the visibility of the laser lights on the wave profile, the water surface is sprayed with water droplets. Profilometry, compared to standard wave probes, can be considered as an alternative source of information that can augment spatial resolution to the identification of the air–water interface to capture nonlinear wave-evolution mechanisms and violent wave–body interactions. Its feasibility and accuracy are examined preliminarily in a small-scale flume and then in a large-scale towing tank using long-crested wave scenarios, including regular, irregular, and focused gravity-driven waves, without the presence of a structure. The values of the wave steepness examined were various and included also quite steep cases with nearly vertical wave fronts. Role played by parameters of the technique, as well as of its setup in capturing the wave features are also analysed, with the aim to provide a useful guidance for other researchers that intent to use and develop further this approach.
- 28 August 2024
- Published by Taylor & Francis in Journal of Turbulence
- Vol. 25 (10-11) , 386-398
Non-equilibrium turbulent boundary layers in high reynolds number flow at incompressible conditions: effects of streamline curvature and three dimensionality
- 28 August 2024
- Published by Taylor & Francis in Journal of Turbulence
- Vol. 25 (10-11) , 386-398
Non-equilibrium turbulent boundary layers in high reynolds number flow at incompressible conditions: effects of streamline curvature and three dimensionality
- Open Access
Designing Composite Adaptive Propeller Blades with Passive Bend–Twist Deformation for Periodic-Load Variations Using Multiple Design Concepts
Four plausible design concepts are applied together to investigate composite bend–twist propeller-blade designs that show high twisting per bending deflection. The design concepts are first explained on a simplified blade structure with limited unique geometric features to determine generalized principles for applying the considered design concepts. Then, the design concepts are applied to another propeller-blade geometry to obtain a bend–twist propeller-blade design that achieves a specific pitch change under an operational loading condition with a significant periodic-load variation. The final composite propeller design shows several times more bend–twist efficiency than other published bend–twist designs and shows a desirable pitch change during the periodic-load variation when loaded with a one-way fluid–structure-interaction-derived load case. The high pitch change suggests that the design would mitigate undesirable blade effects caused by load variations on the propeller during operation.
Open AccessDesigning Composite Adaptive Propeller Blades with Passive Bend–Twist Deformation for Periodic-Load Variations Using Multiple Design Concepts
Four plausible design concepts are applied together to investigate composite bend–twist propeller-blade designs that show high twisting per bending deflection. The design concepts are first explained on a simplified blade structure with limited unique geometric features to determine generalized principles for applying the considered design concepts. Then, the design concepts are applied to another propeller-blade geometry to obtain a bend–twist propeller-blade design that achieves a specific pitch change under an operational loading condition with a significant periodic-load variation. The final composite propeller design shows several times more bend–twist efficiency than other published bend–twist designs and shows a desirable pitch change during the periodic-load variation when loaded with a one-way fluid–structure-interaction-derived load case. The high pitch change suggests that the design would mitigate undesirable blade effects caused by load variations on the propeller during operation.
- Open Access
Experimental Verification of the Elastic Response in a Numeric Model of a Composite Propeller Blade with Bend Twist Deformation
Adaptive composite propeller blades showing bend twist behaviour have received increasing interest from hydrodynamic and structural engineers. When exposed to periodic loading conditions, such propellers can be designed to have higher energy efficiency and emit less noise and vibration than conventional propellers. This work describes a method to produce an adaptive composite propeller blade and how a point load experiment can verify the predicted elastic response in the blade. A 600 mm-long hollow full-size blade was built and statically tested in the laboratory. Finite element modelling predicted a pitch angle change under operational load variable loads of 0.55°, a geometric change that notably compensates for the load cases. In the laboratory experiment, the blade was loaded at two points with increasing magnitude. The elastic response was measured with digital image correlation and strain gauges. Model predictions and experimental measurements showed the same deformation patterns, and the twist angle agreed within 0.01 degrees, demonstrating that such propellers can be successfully built and modelled by finite element analysis.
Open AccessExperimental Verification of the Elastic Response in a Numeric Model of a Composite Propeller Blade with Bend Twist Deformation
Adaptive composite propeller blades showing bend twist behaviour have received increasing interest from hydrodynamic and structural engineers. When exposed to periodic loading conditions, such propellers can be designed to have higher energy efficiency and emit less noise and vibration than conventional propellers. This work describes a method to produce an adaptive composite propeller blade and how a point load experiment can verify the predicted elastic response in the blade. A 600 mm-long hollow full-size blade was built and statically tested in the laboratory. Finite element modelling predicted a pitch angle change under operational load variable loads of 0.55°, a geometric change that notably compensates for the load cases. In the laboratory experiment, the blade was loaded at two points with increasing magnitude. The elastic response was measured with digital image correlation and strain gauges. Model predictions and experimental measurements showed the same deformation patterns, and the twist angle agreed within 0.01 degrees, demonstrating that such propellers can be successfully built and modelled by finite element analysis.
- Open Access
- 9 January 2020
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 8 (1) , 31
Time Domain Modeling of Propeller Forces due to Ventilation in Static and Dynamic Conditions
This paper presents experimental and theoretical studies on the dynamic effect on the propeller loading due to ventilation by using a simulation model that generates a time domain solution for propeller forces in varying operational conditions. For ventilation modeling, the simulation model applies a formula based on the idea that the change in lift coefficient due to ventilation computes the change in the thrust coefficient. It is discussed how dynamic effects, like hysteresis effects and blade frequency dynamics, can be included in the simulation model. Simulation model validation was completed by comparison with CFD (computational fluid dynamics) calculations and model experiments. Experiments were performed for static and dynamic (heave motion) conditions in the large towing tank at the SINTEF Ocean in Trondheim and in the Marine Cybernetics Laboratories at NTNU (Norwegian University of Science and Technology). The main focus of this paper is to explain and validate the prediction model for thrust loss due to ventilation and out of water effects in static and dynamic heave conditions.
- 9 January 2020
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 8 (1) , 31
Open AccessTime Domain Modeling of Propeller Forces due to Ventilation in Static and Dynamic Conditions
This paper presents experimental and theoretical studies on the dynamic effect on the propeller loading due to ventilation by using a simulation model that generates a time domain solution for propeller forces in varying operational conditions. For ventilation modeling, the simulation model applies a formula based on the idea that the change in lift coefficient due to ventilation computes the change in the thrust coefficient. It is discussed how dynamic effects, like hysteresis effects and blade frequency dynamics, can be included in the simulation model. Simulation model validation was completed by comparison with CFD (computational fluid dynamics) calculations and model experiments. Experiments were performed for static and dynamic (heave motion) conditions in the large towing tank at the SINTEF Ocean in Trondheim and in the Marine Cybernetics Laboratories at NTNU (Norwegian University of Science and Technology). The main focus of this paper is to explain and validate the prediction model for thrust loss due to ventilation and out of water effects in static and dynamic heave conditions.