Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Tomasz Małysa has a total of 38 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Life Cycle Assessment of Primary Aluminium Production: OpenLCA-Based Hotspot Analysis and Regional Comparison

    by Lenka Girmanová, Marek Šolc, Dominik Dubec, Peter Blaško, Jozef Petrík, Kristína Kovalčíková, Tomasz Małysa

    Life cycle assessment (LCA) is an important analytical method used to evaluate the environmental impacts of products, services, or processes throughout their entire life cycles—from the extraction of raw materials and production to use and end-of-life treatment. LCA enables the identification of stages with the highest environmental impact burden (hotspots) and supports strategic environmental initiatives, the circular economy, standards, and policies aimed at improving sustainability. This paper analyses the application of LCA in metallurgy, with a focus on primary aluminium production. It outlines the principles of life cycle thinking and explores decarbonisation opportunities within the aluminium industry. This study includes a life cycle impact assessment case study comparing the most significant environmental impacts of primary aluminium production in different regions of the world, including Europe and Asia. The analysis was performed using openLCA software 2.5 with the OzLCI2019 database. Environmental impacts were calculated using the ReCiPe 2016 Midpoint (H) method. The results indicate that primary aluminium production mainly affects impact categories related to high energy consumption, the use of carbon anodes, and associated emissions. The highest impacts were identified in ecotoxicity, followed by global warming, land use, ozone formation, and fossil resource scarcity. No significant regional differences were observed.


  • Open Access

    Determining the direction of pro-safety activities using selected methods of statistical analysis

    by Tomasz Małysa, Jacek Chrapoński

    Objective: The aim of this study was to determine the strength of the correlation between the studied characteristics describing accident events. Methods: Statistical methods were used for the analysis, particularly Pearson’s linear correlation analysis. The study was conducted using PQStat v.1.6.8 statistical software. This study present an analysis of occupational activity and causes of accidents in the studied seniority groups, using Pearson’s linear correlation analysis. Determining the strength of correlation, rather than causality, allows for the identification of key characteristics of accidents (e.g., cause of accident, type of activity performed) and the connections between the studied characteristics. Results: The study identified key activities performed by injured workers and causes of accidents in the studied seniority groups, which should form the basis for actions aimed at reducing the number of recorded occupational accidents. To this end, the strongest correlations in the seniority group-activity-cause of accident pattern are presented graphically. Conclusion: Determining the strongest correlations allows for the identification of key areas on which actions aimed at improving occupational safety should be based. These actions may therefore lead to a reduction in the number of recorded accidents in particular age groups in which the strongest connections between the studied characteristics were identified.

  • Open Access

    Lockout – Tagout System – As A Solution Aimed At Reducing Accidents At Work

    by Tomasz Małysa, Szymon Pawlak, Marek Šolc, Katarzyna Midor

    Every day, accidents related to the accidental activation of hazardous energy sources or their failure to secure them are recorded in manufacturing plants. A lockout/tagout system can be a solution to effectively reduce accident-causing activities during the installation, repair, and maintenance of machinery and equipment. As part of the analysis, a bibliometric analysis was conducted to identify research trends in the field of the LOTO system. To identify the accident rate and analyze it, quantitative data on accidents at work during the repair, maintenance, and installation of machinery was compiled. The quantitative data was predicted using the Winters’ model with multiplicative trend and multiplicative seasonality. Based on our own research, it was concluded that implementing solutions aimed at reducing occupational accidents in this area is a significant issue. Therefore, a methodical approach was proposed for the effective implementation of technical and organizational solutions aimed at improving occupational safety. In terms of the effectiveness of the LOTO system, special attention was paid to the human factor, whose role was considered at every stage of lockout/tagout system implementation. Effective prevention in reducing accident risk relies on technical and organizational solutions. The LOTO system is a solution whose implementation, monitoring, and improvement can translate into increased awareness of safe behavior among employees. Therefore, employers should implement solutions aimed at improving workplace safety.


  • Open Access

    Analysis of Opportunities to Reduce CO2 and NOX Emissions Through the Improvement of Internal Inter-Operational Transport

    by Szymon Pawlak, Tomasz Małysa, Angieszka Fornalczyk, Angieszka Sobianowska-Turek, Marzena Kuczyńska-Chałada

    The reduction of environmental pollutant emissions—including greenhouse gases, particulate matter, and other harmful substances—represents one of the foremost challenges in climate policy, economics, and industrial management today. Excessive emissions of CO2, NOX, and suspended particulates exert significant impacts on climate change as well as human health and welfare. Consequently, numerous studies and regulatory and technological initiatives are underway to mitigate these emissions. One critical area is intra-plant transport within manufacturing facilities, which, despite its localized scope, can substantially contribute to a company’s total emissions. This paper aims to assess the potential of computer simulation using FlexSim software as a decision-support tool for planning inter-operational transport, with a particular focus on environmental aspects. The study analyzes real operational data from a selected production plant (case study), concentrating on the optimization of the number of transport units, their routing, and the layout of workstations. It is hypothesized that reducing the number of trips, shortening transport routes, and efficiently utilizing transport resources can lead to lower emissions of carbon dioxide (CO2) and nitrogen oxides (NOX). The findings provide a basis for a broader adoption of digital tools in sustainable production planning, emphasizing the integration of environmental criteria into decision-making processes. Furthermore, the results offer a foundation for future analyses that consider the development of green transport technologies—such as electric and hydrogen-powered vehicles—in the context of their implementation in the internal logistics of manufacturing enterprises.


  • Open Access

    Application of selected Lean tools in the improvement of work safety in the use of machinery

    by Tomasz Małysa

    The issue of safety in the use of machinery is an important issue for both manufacturers and employers. The current legislation imposes a number of obligations on manufacturers (essential requirements) and employers (minimum requirements) related to ensuring safety at every stage from design to operation. The study analyzes the possibility of applying selected Lean Manufacturing tools to improve occupational safety in the use of machinery (work equipment). The purpose of the study is to present the possibility of application of selected LM tools on operator safety, as well as to meet the requirements of legislators relating to safety related to the use of machinery. Implemented LM solutions improve communication and organization of work, and most importantly, reduce the risks associated with the operation of machinery and equipment.


  • Open Access

    The Influence of the Melting and Casting Parameters on the Surface Quality of Deep-Drawn Steel Coils

    by Marek Šolc, Štefan Markulik, Tomasz Małysa

    Industrial production today increasingly prioritizes sustainability, emphasizing not only efficiency but also minimizing environmental and social impacts. Quality control is key in steel production. The continuous casting process is crucial, as early defect detection can lower costs and prevent unnecessary material use, thereby conserving energy and raw materials. Eliminating defects early reduces the need for costly reworking, saving resources and reducing equipment wear. Additionally, this defect prevention supports efficiency in later steps, like rolling, benefiting overall energy and material consumption. During this research, we identified several parameters whose influence we analyzed on the surface quality of deep-drawn steel. The research confirmed that, for example, the casting speed has a significant influence on the occurrence of surface defects, while, for example, the final bubbling had no statistically significant effect on the surface quality. From a sustainability perspective, monitoring and optimizing key production parameters, like the casting speed, is essential, as improper speeds can cause surface defects that risk the functionality of the final products. By optimizing these parameters, it is possible not only to reduce the risk of product failure but also to contribute to the long-term sustainability of the entire production process, reducing waste and fostering a more considerate approach to natural resources.


  • Open Access

    Optimizing Acidic Reductive Leaching for Lithium Recovery: Enhancing Sustainable Lithium Supply for Energy Markets

    by Agnieszka Sobianowska-Turek, Amelia Zielińska, Weronika Urbańska, Anna Mielniczek, Agnieszka Fornalczyk, Szymon Pawlak, Tomasz Małysa, Janusz Cebulski

    The growing demand for lithium, driven by its crucial role in energy storage technologies such as lithium-ion batteries for electric vehicles, renewable energy storage, and portable electronics, is intensifying the need for sustainable extraction methods. While lithium is sourced from both primary and secondary resources, particularly from recycled materials, the recovery from spent lithium-ion batteries remains challenging. This article presents acidic reductive leaching as a promising alternative for lithium extraction from secondary sources and unconventional ores, emphasizing its potential benefits, such as higher recovery rates, faster processing, and adaptability to various waste materials. Notably, this method facilitates the selective recovery of lithium before cobalt and nickel, providing a strategic advantage. This study highlights the lack of optimization studies on leaching conditions (e.g., acid concentration, reducing agents, temperature, and time) that could maximize lithium recovery while minimizing environmental and economic costs. The article aims to investigate and optimize the parameters of acidic reductive leaching for more efficient lithium recovery. Additionally, the results contribute to the principles of the circular economy and sustainable supply chains in the energy sector, providing a method to reduce dependency on geopolitically constrained lithium resources and supporting the global energy transition toward cleaner energy solutions.


  • Open Access

    Analysis of Production Process Parameters Using Computer Simulation at the Planning Stage

    by Szymon Pawlak, Tomasz Małysa, Agnieszka Fornalczyk

    Computer simulation is one of the tools that is often used to support activities related to the management of the production process. Computer simulation allows for the analysis of the parameters of production or logistics processes, among others. The study presents a comparative analysis of analytical methods and computer simulation (FlexSim 22.2.1 software) in relation to the subject matter. The use of computer simulation allowed for the verification of the number of production resources, determined by analytical methods, and for the proposal of improvements that would allow for shortening the duration of the production process and reducing its costs. The proposed improvements at the stage of planning the production process in terms of the number of production resources used to implement the assumed production plan allowed for the reduction of the duration of the production process and its costs. Therefore, it is justified to use computer simulation in solving problems related to various aspects of the functioning of an enterprise.


  • Open Access

    Application of Selected Lean Manufacturing Tools to Improve Work Safety in the Construction Industry

    by Tomasz Małysa, Joanna Furman, Szymon Pawlak, Marek Šolc

    Shaping safe and hygienic working conditions is the basic obligation of the employer. Employers are still looking for methods, tools, and solutions to improve work safety. The study reviews the literature on solutions aimed at improving occupational safety in construction. For this purpose, bibliometric analysis was used, consisting of the exploration and analysis of scientific studies in the field of occupational health and safety, including the possibility of using the LM tool to improve working conditions on construction sites. The study presents the possibility of implementing Lean Manufacturing (LM) tools in the construction industry. Their strengths and weaknesses were identified, and the benefits and possible barriers related to their effective implementation/use were identified. The result of the analyses was a summary of benefits for the construction industry (strengths and opportunities) as well as areas requiring improvement (weaknesses and hazards) regarding the LM tools used. Based on the conducted analyses, it was found that it is possible to use the tools of the LM concept to improve work safety and organize tasks performed on construction sites. The implementation of LM tools, such as 5S/6S, Poka-Yoke, and Standardization, enables risk reduction through a direct impact on the area being analyzed, in which occupational hazards have been identified. It is also noted that there is a need to simultaneously use LM tools (VM, Gemba-Walk, DHM) as solutions aimed at reducing risk.