Lubos Kotek
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Lubos Kotek has a total of 56 co-authors. Here are the top co-authors by number of shared publications:
- Petr Trávníček
Department of Agricultural, Food and Environmental Engineering, Mendel University in Brno, Zemědělská 1, 613 00 Brno, Czech Republic
8 shared publications Petr Junga
Department of Agricultural, Food and Environmental Engineering Mendel University in Brno Brno Czech Republic
5 shared publicationsAles Nosek
Brno Univ Technol, Qual Management Dept, Brno, Czech Republic
3 shared publications- Petr Blecha
Faculty of Mechanical Engineering, Institute of Production Machines, Systems and Robotics, Brno University of Technology, Technicka 2896/2, 616 69 Brno, Czech Republic
3 shared publications Alois Fiala
2 shared publications- David Krystof
Institute of Lifelong Learning, Mendel University in Brno
2 shared publications
Latest Publications
- Open Access
- 14 September 2026
- Published by Association for Computing Machinery (ACM)
- p. 356-366
Experimental Verification of Operator Reliability in Standardised Control Panel Operation Using Eye Tracking in Virtual Reality
The mean reaction time from stimulus onset to confirmation was 2.140 seconds in the horizontal layout and 2.234 seconds in the vertical layout, with a marginal trend favouring the horizontal arrangement. The same panel design was used in three earlier studies, originally by Cheng, Hsu and Shu [4] on a real panel and subsequently by Kotek et al. [11], [12] with Flystick in a CAVE and across five interfaces. The real-panel study reported a small advantage of the horizontal layout for visual signals, the first virtual study a significant advantage of the horizontal layout, the second a significant advantage of the vertical layout, and the present study finds no significant difference between the two. The contrast suggests that the layout asymmetry documented for manual responses on this panel design does not translate to gaze input, and that the working precision of the integrated eye tracker dominates the residual variance. The findings are discussed in the framework of human reliability analysis and the implications for the use of gaze input in safety-relevant operator interfaces are outlined.
- 14 September 2026
- Published by Association for Computing Machinery (ACM)
- p. 356-366
Open AccessExperimental Verification of Operator Reliability in Standardised Control Panel Operation Using Eye Tracking in Virtual Reality
The mean reaction time from stimulus onset to confirmation was 2.140 seconds in the horizontal layout and 2.234 seconds in the vertical layout, with a marginal trend favouring the horizontal arrangement. The same panel design was used in three earlier studies, originally by Cheng, Hsu and Shu [4] on a real panel and subsequently by Kotek et al. [11], [12] with Flystick in a CAVE and across five interfaces. The real-panel study reported a small advantage of the horizontal layout for visual signals, the first virtual study a significant advantage of the horizontal layout, the second a significant advantage of the vertical layout, and the present study finds no significant difference between the two. The contrast suggests that the layout asymmetry documented for manual responses on this panel design does not translate to gaze input, and that the working precision of the integrated eye tracker dominates the residual variance. The findings are discussed in the framework of human reliability analysis and the implications for the use of gaze input in safety-relevant operator interfaces are outlined.
- Open Access
- 1 January 2026
- Published by Juraj Dobrila University of Pula in Economic Research-Ekonomska Istraživanja
- Vol. 39 (1) , 101-117
Identification of forms of knowledge transfer in the accident learning system
Successful knowledge transfer is one of the basic prerequisites for learning from past events in any enterprise, not excluding enterprises with a risk of major accident. Knowledge can take different forms - tacit and explicit knowledge. In order to apply effective procedures for the transfer of this knowledge, it is necessary to first identify the forms of knowledge that are shared in the organization. Only then can appropriate procedures be applied. In the past, systems for learning from incidents, including support for knowledge sharing, have been developed by various organizations and scientific groups. The issue of identifying forms of knowledge transfer and then applying appropriate methods for sharing this knowledge has not been addressed in much detail. The aim of this paper is to demonstrate on a hypothetical example of the incident the identification of forms of knowledge that can be shared within a Lessons Learned from Incident (LFI) system. A hypothetical example is used as a case study. The contribution of the article is the description of knowledge transfer on a specific example, both explicit and tacit knowledge. The case study can be used as an example of how to transfer knowledge and which methods could be used to streamline accident learning systems.
- 1 January 2026
- Published by Juraj Dobrila University of Pula in Economic Research-Ekonomska Istraživanja
- Vol. 39 (1) , 101-117
Open AccessIdentification of forms of knowledge transfer in the accident learning system
Successful knowledge transfer is one of the basic prerequisites for learning from past events in any enterprise, not excluding enterprises with a risk of major accident. Knowledge can take different forms - tacit and explicit knowledge. In order to apply effective procedures for the transfer of this knowledge, it is necessary to first identify the forms of knowledge that are shared in the organization. Only then can appropriate procedures be applied. In the past, systems for learning from incidents, including support for knowledge sharing, have been developed by various organizations and scientific groups. The issue of identifying forms of knowledge transfer and then applying appropriate methods for sharing this knowledge has not been addressed in much detail. The aim of this paper is to demonstrate on a hypothetical example of the incident the identification of forms of knowledge that can be shared within a Lessons Learned from Incident (LFI) system. A hypothetical example is used as a case study. The contribution of the article is the description of knowledge transfer on a specific example, both explicit and tacit knowledge. The case study can be used as an example of how to transfer knowledge and which methods could be used to streamline accident learning systems.
- Open Access
- 28 April 2025
- Published by Wiley in Process Safety Progress
- Vol. 44 (2) , 239-244
Industrial emergencies caused by extreme wind
The paper deals with the effects of extreme storms and tornadoes on industrial facilities and the possible occurrence of emergencies. The paper aims to determine the potential emergency scenarios associated with these events and to learn from them. For this purpose, available data on emergencies were collected mainly from the ARIA industrial accident database and from available scientific articles. The study was focused on incidents caused mainly by forces associated with the action of extreme storms. The collected data have 40 items, which were subsequently analyzed. Most of these items are located in the European Union. The results of the analysis of the available data indicate that the most frequent consequence was financial damage, often caused by structural damage, power outages, and consequent loss of production. Environmental impacts, such as the release of hazardous chemicals, were also significant. The paper includes lessons learned based on the data collected and analyzed.
- 28 April 2025
- Published by Wiley in Process Safety Progress
- Vol. 44 (2) , 239-244
Open AccessIndustrial emergencies caused by extreme wind
The paper deals with the effects of extreme storms and tornadoes on industrial facilities and the possible occurrence of emergencies. The paper aims to determine the potential emergency scenarios associated with these events and to learn from them. For this purpose, available data on emergencies were collected mainly from the ARIA industrial accident database and from available scientific articles. The study was focused on incidents caused mainly by forces associated with the action of extreme storms. The collected data have 40 items, which were subsequently analyzed. Most of these items are located in the European Union. The results of the analysis of the available data indicate that the most frequent consequence was financial damage, often caused by structural damage, power outages, and consequent loss of production. Environmental impacts, such as the release of hazardous chemicals, were also significant. The paper includes lessons learned based on the data collected and analyzed.
- Open Access
- 11 March 2024
- Published by Wiley in Process Safety Progress
- Vol. 43 (3) , 536-541
Supporting the transfer of knowledge in high‐risk major accident environment
A key element in learning from accidents is the skill associated with the transfer of knowledge gained by the operator from historical incidents. These incidents can include accidents and near‐misses that occurred on site or in similar companies outside the plant. Knowledge transfer within the enterprise can be supported by a suitable framework or model that is easily understood by a wide range of people who are interested in the lessons learned from accidents. The application of some of the knowledge transfer models used so far can be quite time consuming and uncomfortable for the participants. For this reason, this paper aims to propose a simple model designed to support knowledge transfer. This model is proposed based on the widely used PDCA (plan‐do‐check‐act) framework. Its use is demonstrated by the case of a major accident that occurred in the Czech Republic. The model can be used not only for learning from major accidents that occur in the subject company but also for learning from near‐misses or events that occurred in the past in similar plants. Thus, the model can easily help in increasing the efficiency of the accident‐learning system in particular.
- 11 March 2024
- Published by Wiley in Process Safety Progress
- Vol. 43 (3) , 536-541
Open AccessSupporting the transfer of knowledge in high‐risk major accident environment
A key element in learning from accidents is the skill associated with the transfer of knowledge gained by the operator from historical incidents. These incidents can include accidents and near‐misses that occurred on site or in similar companies outside the plant. Knowledge transfer within the enterprise can be supported by a suitable framework or model that is easily understood by a wide range of people who are interested in the lessons learned from accidents. The application of some of the knowledge transfer models used so far can be quite time consuming and uncomfortable for the participants. For this reason, this paper aims to propose a simple model designed to support knowledge transfer. This model is proposed based on the widely used PDCA (plan‐do‐check‐act) framework. Its use is demonstrated by the case of a major accident that occurred in the Czech Republic. The model can be used not only for learning from major accidents that occur in the subject company but also for learning from near‐misses or events that occurred in the past in similar plants. Thus, the model can easily help in increasing the efficiency of the accident‐learning system in particular.
- 14 December 2022
- Published by MM Publishing, s.r.o. in MM Science Journal
- Vol. 2022 (5) , 6263-6268
TESTING HUMAN ERRORS IN VIRTUAL REALITY TRAINING
The MM Science Journal, published since 2008, is a world respected scientific journal. The journal, published in English, is double peer reviewed and competitive in distributing knowledge among domestic and international academics and professionals. Full texts are available on-line on the journal...
- 14 December 2022
- Published by MM Publishing, s.r.o. in MM Science Journal
- Vol. 2022 (5) , 6263-6268
TESTING HUMAN ERRORS IN VIRTUAL REALITY TRAINING
The MM Science Journal, published since 2008, is a world respected scientific journal. The journal, published in English, is double peer reviewed and competitive in distributing knowledge among domestic and international academics and professionals. Full texts are available on-line on the journal...
- Open Access
- 21 September 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (18) , 6578
Implementation of Digital Twin for Engine Block Manufacturing Processes
The digital twin (DT) is undergoing an increase in interest from both an academic and industrial perspective. Although many authors proposed and described various frameworks for DT implementation in the manufacturing industry context, there is an absence of real-life implementation studies reported in the available literature. The main aim of this paper is to demonstrate feasibility of the DT implementation under real conditions of a production plant that is specializing in manufacturing of the aluminum components for the automotive industry. The implementation framework of the DT for engine block manufacturing processes consists of three layers: physical layer, virtual layer and information-processing layer. A simulation model was created using the Tecnomatix Plant Simulation (TPS) software. In order to obtain real-time status data of the production line, programmable logic control (PLC) sensors were used for raw data acquisition. To increase production line productivity, the algorithm for bottlenecks detection was developed and implemented into the DT. Despite the fact that the implementation process is still under development and only partial results are presented in this paper, the DT seems to be a prospective real-time optimization tool for the industrial partner.
- 21 September 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (18) , 6578
Open AccessImplementation of Digital Twin for Engine Block Manufacturing Processes
The digital twin (DT) is undergoing an increase in interest from both an academic and industrial perspective. Although many authors proposed and described various frameworks for DT implementation in the manufacturing industry context, there is an absence of real-life implementation studies reported in the available literature. The main aim of this paper is to demonstrate feasibility of the DT implementation under real conditions of a production plant that is specializing in manufacturing of the aluminum components for the automotive industry. The implementation framework of the DT for engine block manufacturing processes consists of three layers: physical layer, virtual layer and information-processing layer. A simulation model was created using the Tecnomatix Plant Simulation (TPS) software. In order to obtain real-time status data of the production line, programmable logic control (PLC) sensors were used for raw data acquisition. To increase production line productivity, the algorithm for bottlenecks detection was developed and implemented into the DT. Despite the fact that the implementation process is still under development and only partial results are presented in this paper, the DT seems to be a prospective real-time optimization tool for the industrial partner.
- Open Access
- 17 July 2020
- Published by Walter de Gruyter GmbH in Management Systems in Production Engineering
- Vol. 28 (3) , 184-188
An Evaluation of On-Tool System for Sanding Dust Collection: Pilot Study
Hazards identification is essential step in framework of occupational health & safety (OH&S) management system. The task of spruce wood sanding with hand-held power belt sander is considered as a significant resource of exposure to wood dust. Dust from spruce wood is hazard that can cause negative health effects such as asthma and chronic bronchitis. A dust collection box is a commonly used technical measure for reducing exposure to wood dust for this task in practice. The objective of this pilot study was to evaluate the effectiveness of commercially available dust collection box at reducing exposure to wood dust during the task of sanding spruce wood using hand-held power belt sander. Laboratory experiment involved sanding spruce planks (250 mm × 50 mm × 500 mm) in longitudinal direction using belt sander (Bosch, PBS 75 A) with 120 grit sanding belt. Spruce dust mass concentrations were sampled using an aerosol monitor (TSI Inc., DustTrak DRX 8533) in the breathing zone of operator. Inhalable and respirable dust concentrations were both significantly lower (P < 0.0001) when dust box was attached to belt sander compared with sander without a dust box. Results from this pilot study indicate that dust collection box is efficient technical measure for decreasing exposure to aerosol mass concentration during sanding spruce wood with hand-held belt sander.
- 17 July 2020
- Published by Walter de Gruyter GmbH in Management Systems in Production Engineering
- Vol. 28 (3) , 184-188
Open AccessAn Evaluation of On-Tool System for Sanding Dust Collection: Pilot Study
Hazards identification is essential step in framework of occupational health & safety (OH&S) management system. The task of spruce wood sanding with hand-held power belt sander is considered as a significant resource of exposure to wood dust. Dust from spruce wood is hazard that can cause negative health effects such as asthma and chronic bronchitis. A dust collection box is a commonly used technical measure for reducing exposure to wood dust for this task in practice. The objective of this pilot study was to evaluate the effectiveness of commercially available dust collection box at reducing exposure to wood dust during the task of sanding spruce wood using hand-held power belt sander. Laboratory experiment involved sanding spruce planks (250 mm × 50 mm × 500 mm) in longitudinal direction using belt sander (Bosch, PBS 75 A) with 120 grit sanding belt. Spruce dust mass concentrations were sampled using an aerosol monitor (TSI Inc., DustTrak DRX 8533) in the breathing zone of operator. Inhalable and respirable dust concentrations were both significantly lower (P < 0.0001) when dust box was attached to belt sander compared with sander without a dust box. Results from this pilot study indicate that dust collection box is efficient technical measure for decreasing exposure to aerosol mass concentration during sanding spruce wood with hand-held belt sander.
- 1 March 2020
- Published by MM Publishing, s.r.o. in MM Science Journal
- Vol. 2020 (1) , 3711-3715
FOREIGN WORKERS IN INDUSTRY - PREVENTION OF ACCIDENTS
The increasing need for a labour in the Czech Republic and other countries of Central Europe will lead to employing of foreigner workers. It is possible to assume that foreigners will be employed in positions, where the chosen decision can result in major accidents with fatal injuries followed by environmental or a property damage. These actors include operators in chemical or power plants, etc. As can be seen from foreign experience, poorly understood information leads to wrong decision-making process of operator resulting in accidents. The aim of this work is to map the situation in countries with traditionally large share of working foreigners (for example UK, France, Germany, etc.) and to identify the ways for prevention of these types of accidents. Subsequently, to create the set of recommendations for companies, which desire to employ foreign workers.
- 1 March 2020
- Published by MM Publishing, s.r.o. in MM Science Journal
- Vol. 2020 (1) , 3711-3715
FOREIGN WORKERS IN INDUSTRY - PREVENTION OF ACCIDENTS
The increasing need for a labour in the Czech Republic and other countries of Central Europe will lead to employing of foreigner workers. It is possible to assume that foreigners will be employed in positions, where the chosen decision can result in major accidents with fatal injuries followed by environmental or a property damage. These actors include operators in chemical or power plants, etc. As can be seen from foreign experience, poorly understood information leads to wrong decision-making process of operator resulting in accidents. The aim of this work is to map the situation in countries with traditionally large share of working foreigners (for example UK, France, Germany, etc.) and to identify the ways for prevention of these types of accidents. Subsequently, to create the set of recommendations for companies, which desire to employ foreign workers.
- Open Access
- 1 September 2018
- Published by VSB - Technical University of Ostrava in TRANSACTIONS of the VŠB – Technical University of Ostrava, Safety Engineering Series
- Vol. 13 (2) , 49-54
Development of Production Machines With Respect to the Human Factors
The inappropriate adaptation of the machinery to human properties and abilities may result both in physiological effects on the operator (e.g. muscle skeletal damage) resulting, for example, from inappropriate body posture, excessive or repeated exertion, and also in psycho-physiological effects such as mental overload or insufficient workload or stress, which may occur due to the operation, inspection or maintenance of the machine within the limits of its intended use. Psycho-physiological effects can lead to an increase in operator’s errors, lower safety or quality, thus directly affecting the quality of the production process. For these reasons, the ergonomics needs to be of high importance. The submitted paper describes the use of advanced virtual reality technologies and risk management in machine development.
- 1 September 2018
- Published by VSB - Technical University of Ostrava in TRANSACTIONS of the VŠB – Technical University of Ostrava, Safety Engineering Series
- Vol. 13 (2) , 49-54
Open AccessDevelopment of Production Machines With Respect to the Human Factors
The inappropriate adaptation of the machinery to human properties and abilities may result both in physiological effects on the operator (e.g. muscle skeletal damage) resulting, for example, from inappropriate body posture, excessive or repeated exertion, and also in psycho-physiological effects such as mental overload or insufficient workload or stress, which may occur due to the operation, inspection or maintenance of the machine within the limits of its intended use. Psycho-physiological effects can lead to an increase in operator’s errors, lower safety or quality, thus directly affecting the quality of the production process. For these reasons, the ergonomics needs to be of high importance. The submitted paper describes the use of advanced virtual reality technologies and risk management in machine development.
- 1 July 2018
- Published by Elsevier in Renewable Energy
- Vol. 122, 89-97
Quantitative analyses of biogas plant accidents in Europe
- 1 July 2018
- Published by Elsevier in Renewable Energy
- Vol. 122, 89-97
Quantitative analyses of biogas plant accidents in Europe