Jason T. Lotter
Research Interests
Jason T. Lotter has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
- Jennifer S. Pierce
Benchmark Risk Group, Chicago, IL, USA
4 shared publications Anders Abelmann
Cardno ChemRisk, 30 North LaSalle Street Suite 3910, Chicago, IL 60602, USA
3 shared publicationsBrent L. Finley
Cardno ChemRisk, 231 Front Street Suite 202, Brooklyn, NY 11201, USA
3 shared publications- Kara A. Keeton
Cardno ChemRisk, Chicago, IL, USA
2 shared publications Aaron M. Chapman
C Cardno ChemRisk , Washington , DC , USA
1 shared publication- Alexander S. Riordan
Insight Exposure & Risk Sciences Group Detroit Michigan USA
1 shared publication
Latest Publications
- 2 July 2020
- Published by Taylor & Francis in Inhalation Toxicology
- Vol. 32 (8) , 354-367
Pilot study evaluating inhalation and dermal glyphosate exposure resulting from simulated heavy residential consumer application of Roundup®
The purpose of this study was to evaluate the individual contributions of inhalation and dermal exposures to urinary glyphosate levels following the heavy residential consumer application of a glyp...
- 2 July 2020
- Published by Taylor & Francis in Inhalation Toxicology
- Vol. 32 (8) , 354-367
Pilot study evaluating inhalation and dermal glyphosate exposure resulting from simulated heavy residential consumer application of Roundup®
The purpose of this study was to evaluate the individual contributions of inhalation and dermal exposures to urinary glyphosate levels following the heavy residential consumer application of a glyp...
- 6 December 2017
- Published by Taylor & Francis in Inhalation Toxicology
- Vol. 29 (12-14) , 555-566
Evaluation of take-home exposure to asbestos from handling asbestos-contaminated worker clothing following the abrasive sawing of cement pipe
Although industrial uses of asbestos have declined since the 1970s, in recent years there has been a renewed interest in para-occupational (“take-home”) exposure to these fibers. The aim of this study was to quantify the release of asbestos fibers, if any, during the shaking out of crocidolite- and chrysotile-contaminated clothing in a simulated at-home setting. An exposure study was conducted in which personal and area air samples were collected during the handling (i.e. shake-out) of work clothing (shirt and pants) previously worn by an operator who had cut asbestos-containing cement pipe. During eight “loading” events, the operator cut a historically representative asbestos-containing cement pipe (10% crocidolite and 25% chrysotile) using a powered abrasive saw. Subsequently, 30-minute air samples were collected during four “shake-out” events, each of which consisted of the handling of two complete sets of contaminated work clothes. Samples were analyzed in accordance with NIOSH methods 7400 and 7402. The mean phase contrast microscopy equivalent (PCME) airborne concentrations were 0.52 f/cc (SD = 0.34 f/cc) for total asbestos fibers, 0.36 f/cc (SD = 0.26 f/cc) for chrysotile and 0.17 f/cc (SD = 0.096 f/cc) for crocidolite. Based on likely estimates of the frequency of laundering activities, and assuming that the dusty clothing (1) is not blown off in the occupational setting using compressed air and (2) is not shaken out before entering the home, a family member handling the clothing could potentially have a lifetime cumulative exposure to chrysotile and crocidolite of approximately 0.20 f/cc-year and 0.096 f/cc-year, respectively.
- 6 December 2017
- Published by Taylor & Francis in Inhalation Toxicology
- Vol. 29 (12-14) , 555-566
Evaluation of take-home exposure to asbestos from handling asbestos-contaminated worker clothing following the abrasive sawing of cement pipe
Although industrial uses of asbestos have declined since the 1970s, in recent years there has been a renewed interest in para-occupational (“take-home”) exposure to these fibers. The aim of this study was to quantify the release of asbestos fibers, if any, during the shaking out of crocidolite- and chrysotile-contaminated clothing in a simulated at-home setting. An exposure study was conducted in which personal and area air samples were collected during the handling (i.e. shake-out) of work clothing (shirt and pants) previously worn by an operator who had cut asbestos-containing cement pipe. During eight “loading” events, the operator cut a historically representative asbestos-containing cement pipe (10% crocidolite and 25% chrysotile) using a powered abrasive saw. Subsequently, 30-minute air samples were collected during four “shake-out” events, each of which consisted of the handling of two complete sets of contaminated work clothes. Samples were analyzed in accordance with NIOSH methods 7400 and 7402. The mean phase contrast microscopy equivalent (PCME) airborne concentrations were 0.52 f/cc (SD = 0.34 f/cc) for total asbestos fibers, 0.36 f/cc (SD = 0.26 f/cc) for chrysotile and 0.17 f/cc (SD = 0.096 f/cc) for crocidolite. Based on likely estimates of the frequency of laundering activities, and assuming that the dusty clothing (1) is not blown off in the occupational setting using compressed air and (2) is not shaken out before entering the home, a family member handling the clothing could potentially have a lifetime cumulative exposure to chrysotile and crocidolite of approximately 0.20 f/cc-year and 0.096 f/cc-year, respectively.
- 1 November 2016
- Published by Elsevier in Regulatory Toxicology and Pharmacology
- Vol. 81, 20-32
An assessment of formaldehyde emissions from laminate flooring manufactured in China
- 1 November 2016
- Published by Elsevier in Regulatory Toxicology and Pharmacology
- Vol. 81, 20-32
An assessment of formaldehyde emissions from laminate flooring manufactured in China
- Open Access
- 1 January 2015
- Published by Elsevier in Toxicology Reports
- Vol. 2, 1171-1181
Naturally occurring diacetyl and 2,3-pentanedione concentrations associated with roasting and grinding unflavored coffee beans in a commercial setting
- 1 January 2015
- Published by Elsevier in Toxicology Reports
- Vol. 2, 1171-1181
Open AccessNaturally occurring diacetyl and 2,3-pentanedione concentrations associated with roasting and grinding unflavored coffee beans in a commercial setting
- Open Access
- 1 January 2015
- Published by Elsevier in Toxicology Reports
- Vol. 2, 1200-1208
Characterization of naturally occurring airborne diacetyl concentrations associated with the preparation and consumption of unflavored coffee
- 1 January 2015
- Published by Elsevier in Toxicology Reports
- Vol. 2, 1200-1208
Open AccessCharacterization of naturally occurring airborne diacetyl concentrations associated with the preparation and consumption of unflavored coffee
- 26 December 2013
- Published by IWA Publishing in Journal of Water and Health
- Vol. 12 (3) , 533-542
Groundwater arsenic in Chimaltenango, Guatemala
In the Municipality of Chimaltenango, Guatemala, we sampled groundwater for total inorganic arsenic. In total, 42 samples were collected from 27 (43.5%) of the 62 wells in the municipality, with sites chosen to achieve spatial representation throughout the municipality. Samples were collected from household faucets used for drinking water, and sent to the USA for analysis. The only site found to have a concentration above the 10 μg/L World Health Organization provisional guideline for arsenic in drinking water was Cerro Alto, where the average concentration was 47.5 μg/L. A health risk assessment based on the arsenic levels found in Cerro Alto showed an increase in noncarcinogenic and carcinogenic risks for residents as a result of consuming groundwater as their primary drinking water source. Using data from the US Geological Survey and our global positioning system data of the sample locations, we found Cerro Alto to be the only site sampled within the tertiary volcanic rock layer, a known source of naturally occurring arsenic. Recommendations were made to reduce the levels of arsenic found in the community's drinking water so that the health risks can be managed.
- 26 December 2013
- Published by IWA Publishing in Journal of Water and Health
- Vol. 12 (3) , 533-542
Groundwater arsenic in Chimaltenango, Guatemala
In the Municipality of Chimaltenango, Guatemala, we sampled groundwater for total inorganic arsenic. In total, 42 samples were collected from 27 (43.5%) of the 62 wells in the municipality, with sites chosen to achieve spatial representation throughout the municipality. Samples were collected from household faucets used for drinking water, and sent to the USA for analysis. The only site found to have a concentration above the 10 μg/L World Health Organization provisional guideline for arsenic in drinking water was Cerro Alto, where the average concentration was 47.5 μg/L. A health risk assessment based on the arsenic levels found in Cerro Alto showed an increase in noncarcinogenic and carcinogenic risks for residents as a result of consuming groundwater as their primary drinking water source. Using data from the US Geological Survey and our global positioning system data of the sample locations, we found Cerro Alto to be the only site sampled within the tertiary volcanic rock layer, a known source of naturally occurring arsenic. Recommendations were made to reduce the levels of arsenic found in the community's drinking water so that the health risks can be managed.