JGJason R. Grenier

Jason R. Grenier

*This is an algorithmically generated author record based on publicly available information.

Jason R. Grenier has a total of 51 co-authors. Here are the top co-authors by number of shared publications:

  • Peter R. Herman

    Institute for Optical Sciences, and the Department of Electrical and Computer Engineering, University of Toronto, 10 Kings College Rd., Toronto, Ontario, M5S 3G4, Canada

    16 shared publications
  • Luis Andre Fernandes

    Institute for Optical Sciences, and the Department of Electrical and Computer Engineering, University of Toronto, 10 Kings College Rd., Toronto, Ontario, M5S 3G4, Canada

    15 shared publications
  • Paulo V. S. Marques

    Univ. do Porto (Portugal)

    10 shared publications
  • J. Stewart Aitchison

    Institute for Optical Sciences, and the Department of Electrical and Computer Engineering University of Toronto, 10 Kings College Rd., Toronto, Ontario M5 S 3G4, Canada

    9 shared publications
  • Chad C. Terwilliger

    Corning Research and Development Corp. (United States)

    3 shared publications
  • Lars Brusberg

    Corning Research and Development Corp. (United States)

    3 shared publications

Latest Publications

  • Wafer-scale fabrication of opto-electronic glass substrates for co-packaged optics (Conference Presentation)

    by Jason R. Grenier, Lars Brusberg, Garima C. Nagar, Chad C. Terwilliger, Sean Garner, Chuanche Wang

    Co-packaged optical modules aim to increase bandwidth at a reduced energy per bit, however, the cost per bit metric must also be considered. Corning is working on wafer-scale manufacturing of glass-based substrates with low-loss (<0.05 dB/cm) single-mode (1310 nm) ion-exchanged waveguides. High-speed ultrafast laser processes are used to form embedded alignment features that enable passive alignment of on-chip waveguides to standard MPO connectors, through glass vias for electrical connectivity, and for singulating the glass wafers into individual chips with optical-quality end-facets that are ready for low-loss edge coupling without end-face polishing. These wafer scale processes provide a path towards high-volume manufacturing of low-cost, high-fiber-count glass-based co-packaged optical modules.

  • Laser singulation of high refractive index glasses for augmented reality waveguides

    by Jason R. Grenier, Erin K. Hosmer

    As Augmented Reality (AR) and Mixed Reality (MR) devices emerge and promise to revolutionize the way in which we perceive and interact with the world, the continued focus on the low-cost, high-volume manufacturing of the waveguides that underpin the technology is required. A significant challenge is the singulation of the high refractive index glass wafers into individual waveguides without affecting the sensitive optical components (e.g., gratings) on them. The laser nanoPerforation glass singulation process developed by Corning is well-established in multiple industrial applications and has been successfully deployed into high-volume manufacturing for AR waveguide devices. A detailed investigation into optimizing the edge strength of 0.5 mm thick Corning high refractive index glasses (n=1.7-2.0) reveals values in the range of 130-150 MPa (B10). By applying fundamental process understanding and further optimization to Corning 0.3 mm Augmented Reality Systems (ARS) 2.0 glass, an initial demonstration of edge strength values up to 202 MPa (B10) is realized.

  • Photonic glass interposer with integrated optical waveguides for fiber-to-chip coupling

    by Lars Brusberg, Lucas W. Yeary, Seong-Ho Seok, JungHyun Noh, Jason R. Grenier, Betsy J. Johnson, Chad C. Terwilliger, Jeffrey S. Clark

    A novel packaging solution is discussed where both optical and electrical connectivity can be fabricated using ion-exchange (IOX) waveguides integrated into a glass with thin film metallization for an electrical redistribution layer. Design and process aspects are discussed to support silicon photonic flip-chip assembly directly to the glass substrate. Low-loss evanescent coupling occurs between the IOX waveguides embedded in the glass and the photonic chips with high-density silicon nitride optical I/Os. This design enables low-cost assembly methods involving the pick and place alignment of optical components and offers connectivity with low-profile mechanical transfer (MT) ferrule-based fiber connectors.


  • Laser dicing of glass wafer products into sub-millimeter sized dies

    by Jason R. Grenier, Andreas S. Gaab, Nicolai Haenel, Elisabeth Rosier

    The use of glass wafers for optical and electronic device substrates requires a high-quality, high throughput dicing solution. The patented Corning® laser nanoPerforation process is well-established in multiple industrial applications for glass cutting. A key attribute is the homogeneous appearance of the side wall over the full thickness of the glass and its high edge quality with low chipping and high throughput performance. Combining this laser-based solution with the mechanical breaking technology by Dynatex provides a complete and scalable path for glass wafer dicing applicable to normal, as well as very small die sizes. Detailed investigations on several different glass wafer materials have demonstrated the current capabilities for this laser and mechanical singulation process and confirm the exceptional performance. A tiny die size of 150×150 μm is demonstrated on a 200 mm diameter, 150 μm thick glass wafer. The laser-based solution can be enhanced to ensure side-wall uniformity at the large number of intersecting lines found on densely packed wafers. Finally, the requirements of the clear aperture for the laser entrance can be reduced into the range below 100 μm by applying Corning’s fundamental process understanding and optimization of the laser optics.

  • Towards high-volume manufacturing of optoelectronic glass substrates for co-packaged optics

    by Jason R. Grenier, Lars Brusberg, Chad C. Terwilliger, Juergen Matthies, Jeffrey S. Clark, Daniel W. Levesque, Kristopher A. Wieland

    Co-packaged optical modules aim to meet the increasing bandwidth and power reduction requirements in next-generation datacenter switches. Meeting the cost per capacity targets requires new and innovative wafer-scale manufacturing solutions. In this work, glass with low-loss (<0.1 dB/cm) single-mode ion-exchanged waveguides is proposed as an optoelectronic substrate for co-packaged optics. High-speed ultrafast laser processes are developed to fabricate through glass vias for electrical connections, ablated features to enable passive alignment of MPO-connector to chip coupling, and for the singulation of glass wafers into individual optical circuits with optical quality end-facets for low-loss edge coupling without subsequent post-polishing or finishing steps.


  • Glass Substrate With Integrated Waveguides for Surface Mount Photonic Packaging

    by Lars Brusberg, Aramais R. Zakharian, Sukru Ekin Kocabas, Lucas W. Yeary, Jason R. Grenier, Chad C. Terwilliger, Robert A. Bellman

    Co-packaged optics in next-generation datacenters require the assembly of multiple components on the same multichip module (MCM) and interconnection with hundreds of optical fibers. A novel photonic packaging substrate is required to leverage high-throughput electronic assembly with high precision optical alignment. This report highlights the results of glass substrate optimization to include optical waveguides, a fiber connector and chip interfaces, as well as features for electrical connectivity, as a potential component for a co-packaging solution. Glass with smooth surfaces and high precision alignment features enables surface mounted flip-chip assembly of electrical integrated circuits, photonic components, and optical fiber connectors. All components will be placed by vision alignment using precise fiducials or passive alignment in mechanical features to the surface of the glass substrate with optical and electrical interconnects. Flip-chip assembly of photonic components is enabled by evanescent coupling with couplers having a minimum non-linear taper length of 1.5 mm. The designed interface loss to the integrated ion-exchanged glass waveguides is less than 1 dB with an interface which is robust to lateral misalignment of up to 4 microns. Light can be transmitted in the glass substrate with a propagation loss of 0.1 dB/cm. Fiber interfaces are mechanically and thermally decoupled from the photonic component and glass waveguides can fan-out the component pitch from 50 microns to 250 microns of the MTP-16 ferrule connector. The solder reflow compatible connector receptacle is passively aligned and demonstrate with an average loss of 0.68 dB.


  • Open Access

    Femtosecond laser inscription of asymmetric directional couplers for in-fiber optical taps and fiber cladding photonics

    by Jason R. Grenier, Luís A. Fernandes, Peter R. Herman

    Precise alignment of femtosecond laser tracks in standard single mode optical fiber is shown to enable controllable optical tapping of the fiber core waveguide light with fiber cladding photonic circuits. Asymmetric directional couplers are presented with tunable coupling ratios up to 62% and bandwidths up to 300 nm at telecommunication wavelengths. Real-time fiber monitoring during laser writing permitted a means of controlling the coupler length to compensate for micron-scale alignment errors and to facilitate tailored design of coupling ratio, spectral bandwidth and polarization properties. Laser induced waveguide birefringence was harnessed for polarization dependent coupling that led to the formation of in-fiber polarization-selective taps with 32 dB extinction ratio. This technology enables the interconnection of light propagating in pre-existing waveguides with laser-formed devices, thereby opening a new practical direction for the three-dimensional integration of optical devices in the cladding of optical fibers and planar lightwave circuits.


  • Femtosecond laser 3D writing: from smart catheters to distributed lab-in-fiber sensing

    by Moez Haque, Jason R. Grenier, Kenneth K. C. Lee, Luís A. Fernandes, Peter R. Herman


  • Fiber optic stress-independent helical torsion sensor

    by Luís A. Fernandes, Jason R. Grenier, J. Stewart Aitchison, Peter R. Herman

    Femtosecond laser-fabricated waveguides have been formed into helical paths throughout the cladding of single-mode optical fibers to demonstrate a strain-independent fiber torsion sensor. A comparison between a Bragg grating sensor and a Mach–Zehnder based on helical waveguides (HWs) showed a much weaker twist sensitivity of 1.5 pm/(rad/m) for the grating in contrast with a value of 261 pm/(rad/m) for the interferometer. The HW geometry provided an unambiguous determination of the rotational direction of the twist while facilitating a convenient and efficient means for optical coupling into the single-mode core of the fiber. The flexible three-dimensional writing by the femtosecond laser fabrication method enabled the direct inscription of compact and robust optical cladding devices without the need for combining or splicing multiple-fiber segments.


  • Femtosecond Laser Inscription of Photonic and Optofluidic Devices in Fiber Cladding

    by Jason R. Grenier, Moez Haque, Luís A. Fernandes, Kenneth K. C. Lee, Peter R. Herman