Krzysztof Firmanty
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Krzysztof Firmanty has a total of 74 co-authors. Here are the top co-authors by number of shared publications:
- Jaroslaw Barela
Military Univ. of Technology (Poland)
13 shared publications Mariusz Kastek
Military Univ. of Technology (Poland)
8 shared publicationsM. Kastek
Military Univ. of Technology (Poland)
5 shared publications- Mariusz Kastek
Military University of Technology in Warsaw
5 shared publications R. Dulski
Military Univ. of Technology (Poland)
5 shared publications- Tomasz Sosnowski
Institute of Optoelectronics, Military University of Technology, 00-908 Warsaw, Poland
5 shared publications
Latest Publications
- 22 June 2026
- Published by PIAP - Industrial Research Institute for Automation and Measurements in Pomiary Automatyka Robotyka
- Vol. 30 (2) , 81-87
Measurement of Methane Combustion Products in Industrial Degassing Flares
This research paper presents a comprehensive study on measuring methane combustion products in industrial degassing flares, addressing critical environmental and regulatory compliance requirements in the oil and gas sector. The study was motivated by stringent new regulations, including the European Union’s Methane Regulation (2024/1787) and Oil & Gas Methane Partnership 2.0 (OGMP2.0) guidelines, which mandate a minimum 99% methane destruction efficiency for flares and require experimental determination of destruction coefficients. The authors investigated two complementary measurement techniques for determining flare combustion efficiency: direct gas sampling and passive Fourier Transform Infrared spectroscopy (pFTIR). The experimental work was conducted using an Esders degassing flare. The pFTIR method utilized a Mini HyperCam Telops imaging FTIR spectroradiometer. This remote sensing approach analyzed thermal radiation emitted by hot combustion gases, eliminating the need for physical access to hazardous flare locations. Both measurement techniques successfully verified high methane destruction efficiency exceeding the 99% regulatory threshold. The direct gas sampling method achieved a destruction efficiency of 99.09%, while the pFTIR approach demonstrated 99.77% efficiency. The relative difference between methods was minimal at 0.66%, indicating strong correlation and reliability.
- 22 June 2026
- Published by PIAP - Industrial Research Institute for Automation and Measurements in Pomiary Automatyka Robotyka
- Vol. 30 (2) , 81-87
Measurement of Methane Combustion Products in Industrial Degassing Flares
This research paper presents a comprehensive study on measuring methane combustion products in industrial degassing flares, addressing critical environmental and regulatory compliance requirements in the oil and gas sector. The study was motivated by stringent new regulations, including the European Union’s Methane Regulation (2024/1787) and Oil & Gas Methane Partnership 2.0 (OGMP2.0) guidelines, which mandate a minimum 99% methane destruction efficiency for flares and require experimental determination of destruction coefficients. The authors investigated two complementary measurement techniques for determining flare combustion efficiency: direct gas sampling and passive Fourier Transform Infrared spectroscopy (pFTIR). The experimental work was conducted using an Esders degassing flare. The pFTIR method utilized a Mini HyperCam Telops imaging FTIR spectroradiometer. This remote sensing approach analyzed thermal radiation emitted by hot combustion gases, eliminating the need for physical access to hazardous flare locations. Both measurement techniques successfully verified high methane destruction efficiency exceeding the 99% regulatory threshold. The direct gas sampling method achieved a destruction efficiency of 99.09%, while the pFTIR approach demonstrated 99.77% efficiency. The relative difference between methods was minimal at 0.66%, indicating strong correlation and reliability.
- 18 September 2024
- Published by PIAP - Industrial Research Institute for Automation and Measurements in Pomiary Automatyka Robotyka
- Vol. 28 (3) , 131-138
Measurement of Thermal Camera’s Parameters’ Method Using an Automated Test Bench
To achieve precise and repeatable measurements of thermal camera’s parameters, it is essential to eliminate human error. For this purpose, an automated test bench has been developed that allows fully automatic, semi-automatic and manual control of the measurement process. The designed stand supports remote control via Ethernet interface or USB connection. The developed software enables control, data recording and parameter determination of thermal cameras. The test bench ensures high quality and reliability of thermal measurements, enabling controlled examination of camera characteristics with minimal operator involvement.
- 18 September 2024
- Published by PIAP - Industrial Research Institute for Automation and Measurements in Pomiary Automatyka Robotyka
- Vol. 28 (3) , 131-138
Measurement of Thermal Camera’s Parameters’ Method Using an Automated Test Bench
To achieve precise and repeatable measurements of thermal camera’s parameters, it is essential to eliminate human error. For this purpose, an automated test bench has been developed that allows fully automatic, semi-automatic and manual control of the measurement process. The designed stand supports remote control via Ethernet interface or USB connection. The developed software enables control, data recording and parameter determination of thermal cameras. The test bench ensures high quality and reliability of thermal measurements, enabling controlled examination of camera characteristics with minimal operator involvement.
- 14 June 2024
- Published by PIAP - Industrial Research Institute for Automation and Measurements in Pomiary Automatyka Robotyka
- Vol. 28 (2) , 107-112
Non-selective Reference Surfaces for Hyperspectral Remote Sensing in the Long-Wave Infrared Range
This article focuses on the construction of reference surfaces with the desired spectral characteristics similar to a gray body. Using wooden plywood with a rough surface and coatings of various emissivity values, surfaces with non-selective spectral properties were created. The consistency of laboratory measurement results using a reflectance spectrometer with data obtained from a hyperspectral camera was confirmed. By utilizing multiple reference surfaces with precisely known emissivity characteristics, it will be possible to accurately determine the radiation components of the measured scene’s surroundings. Although the technology of these surfaces still requires improvement, their usefulness in remote sensing measurements is undeniable. Additionally, differences in response to solar radiation between various reference surfaces provide significant information that can be used in remote sensing and material identification. Incorporating the heating dynamics of the studied objects’ surfaces is crucial for accurate measurement modeling.
- 14 June 2024
- Published by PIAP - Industrial Research Institute for Automation and Measurements in Pomiary Automatyka Robotyka
- Vol. 28 (2) , 107-112
Non-selective Reference Surfaces for Hyperspectral Remote Sensing in the Long-Wave Infrared Range
This article focuses on the construction of reference surfaces with the desired spectral characteristics similar to a gray body. Using wooden plywood with a rough surface and coatings of various emissivity values, surfaces with non-selective spectral properties were created. The consistency of laboratory measurement results using a reflectance spectrometer with data obtained from a hyperspectral camera was confirmed. By utilizing multiple reference surfaces with precisely known emissivity characteristics, it will be possible to accurately determine the radiation components of the measured scene’s surroundings. Although the technology of these surfaces still requires improvement, their usefulness in remote sensing measurements is undeniable. Additionally, differences in response to solar radiation between various reference surfaces provide significant information that can be used in remote sensing and material identification. Incorporating the heating dynamics of the studied objects’ surfaces is crucial for accurate measurement modeling.
- 7 December 2021
- Published by PIAP - Industrial Research Institute for Automation and Measurements in Pomiary Automatyka Robotyka
- Vol. 25 (4) , 77-82
Novelty Surface Coatings for Far Infrared Spectrum Black Body Radiators
Black body radiation sources are commonly used devices in areas related to thermal imaging and radiometry. They are the closest physical approximation of theoretical black body emitter derived from the Planck’s law. Majority of such devices are costly with restricted information about their production technology, including their emitter surface. A few relatively easily accessible coatings with potential application in such devices have been chosen and their emissivity measured. The paper presents measurements that provides information necessary to determine whether there are coatings viable for black body emitter or reference surface.
- 7 December 2021
- Published by PIAP - Industrial Research Institute for Automation and Measurements in Pomiary Automatyka Robotyka
- Vol. 25 (4) , 77-82
Novelty Surface Coatings for Far Infrared Spectrum Black Body Radiators
Black body radiation sources are commonly used devices in areas related to thermal imaging and radiometry. They are the closest physical approximation of theoretical black body emitter derived from the Planck’s law. Majority of such devices are costly with restricted information about their production technology, including their emitter surface. A few relatively easily accessible coatings with potential application in such devices have been chosen and their emissivity measured. The paper presents measurements that provides information necessary to determine whether there are coatings viable for black body emitter or reference surface.
- 13 September 2021
- Published by PIAP - Industrial Research Institute for Automation and Measurements in Pomiary Automatyka Robotyka
- Vol. 25 (3) , 37-41
Detection, Identification, and Quantification of SF6 Point-Source Emissions Using Hyper-Cam LW Airborne Platform
Detection, identification, and quantification of greenhouse gases is essential to ensure compliance with regulatory guidelines and mitigate damage associated with anthropogenic climate change. Passive infrared hyperspectral imaging technology is among the solutions that can detect, identify and quantify multiple greenhouse gases simultaneously. The Telops Hyper-Cam Airborne Platform is an established system for aerial thermal infrared hyperspectral measurements for gas survey applications. In support of the Hypercam, is developing a suite of hyperspectral imaging data processing algorithms that allow for gas detection, identification, and quantification in real-time. In the Fall of 2020, the Hyper-Cam-LW Airborne platform was flown above a validated SF6 gas release system to collect hyperspectral data for gas quantification analysis. This measurement campaign was performed to document performance of the Hyper-Cam gas quantification capabilities against known quantities of released gas.
- 13 September 2021
- Published by PIAP - Industrial Research Institute for Automation and Measurements in Pomiary Automatyka Robotyka
- Vol. 25 (3) , 37-41
Detection, Identification, and Quantification of SF6 Point-Source Emissions Using Hyper-Cam LW Airborne Platform
Detection, identification, and quantification of greenhouse gases is essential to ensure compliance with regulatory guidelines and mitigate damage associated with anthropogenic climate change. Passive infrared hyperspectral imaging technology is among the solutions that can detect, identify and quantify multiple greenhouse gases simultaneously. The Telops Hyper-Cam Airborne Platform is an established system for aerial thermal infrared hyperspectral measurements for gas survey applications. In support of the Hypercam, is developing a suite of hyperspectral imaging data processing algorithms that allow for gas detection, identification, and quantification in real-time. In the Fall of 2020, the Hyper-Cam-LW Airborne platform was flown above a validated SF6 gas release system to collect hyperspectral data for gas quantification analysis. This measurement campaign was performed to document performance of the Hyper-Cam gas quantification capabilities against known quantities of released gas.
- Open Access
Measurement and Analysis of the Parameters of Modern Long-Range Thermal Imaging Cameras
Today’s long-range infrared cameras (LRIRC) are used in many systems for the protection of critical infrastructure or national borders. The basic technical parameters of such systems are noise equivalent temperature difference (NETD); minimum resolvable temperature difference (MRTD); and the range of detection, recognition and identification of selected objects (DRI). This paper presents a methodology of the theoretical determination of these parameters on the basis of technical data of LRIRCs. The first part of the paper presents the methods used for the determination of the detection, recognition and identification ranges based on the well-known Johnson criteria. The theoretical backgrounds for both approaches are given, and the laboratory test stand is described together with a brief description of the methodology adopted for the measurements of the selected necessary characteristics of a tested observation system. The measurements were performed in the Accredited Testing Laboratory of the Institute of Optoelectronics of the Military University of Technology (AL IOE MUT), whose activity is based on the ISO/IEC 17025 standard. The measurement results are presented, and the calculated ranges for a selected set of IR cameras are given, obtained on the basis of the Johnson criteria. In the final part of the article, the obtained measurement results are presented together with an analysis of the measurement uncertainty for 10 LRIRCs. The obtained measurement results were compared to the technical parameters presented by the manufacturers.
Open AccessMeasurement and Analysis of the Parameters of Modern Long-Range Thermal Imaging Cameras
Today’s long-range infrared cameras (LRIRC) are used in many systems for the protection of critical infrastructure or national borders. The basic technical parameters of such systems are noise equivalent temperature difference (NETD); minimum resolvable temperature difference (MRTD); and the range of detection, recognition and identification of selected objects (DRI). This paper presents a methodology of the theoretical determination of these parameters on the basis of technical data of LRIRCs. The first part of the paper presents the methods used for the determination of the detection, recognition and identification ranges based on the well-known Johnson criteria. The theoretical backgrounds for both approaches are given, and the laboratory test stand is described together with a brief description of the methodology adopted for the measurements of the selected necessary characteristics of a tested observation system. The measurements were performed in the Accredited Testing Laboratory of the Institute of Optoelectronics of the Military University of Technology (AL IOE MUT), whose activity is based on the ISO/IEC 17025 standard. The measurement results are presented, and the calculated ranges for a selected set of IR cameras are given, obtained on the basis of the Johnson criteria. In the final part of the article, the obtained measurement results are presented together with an analysis of the measurement uncertainty for 10 LRIRCs. The obtained measurement results were compared to the technical parameters presented by the manufacturers.
- Open Access
Characterization of Absorption Losses and Transient Thermo-Optic Effects in a High-Power Laser System
(1) Background: The modeling, characterization, and mitigation of transient lasers, thermal stress, and thermo-optic effects (TOEs) occurring inside high energy lasers have become hot research topics in laser physics over the past few decades. The physical sources of TOEs are the un-avoidable residual absorption and scattering in the volume and on the surface of passive and active laser elements. Therefore, it is necessary to characterize and mitigate these effects in real laser systems under high-power operations. (2) Methods: The laboratory setup comprised a 10-kW continuous wave laser source with a changeable beam diameter, and dynamic registration of the transient temperature profiles was applied using an infrared camera. Modeling using COMSOL Multiphysics enabled matching of the surface and volume absorption coefficients to the experimental data of the temperature profiles. The beam quality was estimated from the known optical path differences (OPDs) occurring within the examined sample. (3) Results: The absorption loss coefficients of dielectric coatings were determined for the evaluation of several coating technologies. Additionally, OPDs for typical transmissive and reflective elements were determined. (4) Conclusions: The idea of dynamic self-compensation of transient TOEs using a tailored design of the considered transmissive and reflecting elements is proposed.
Open AccessCharacterization of Absorption Losses and Transient Thermo-Optic Effects in a High-Power Laser System
(1) Background: The modeling, characterization, and mitigation of transient lasers, thermal stress, and thermo-optic effects (TOEs) occurring inside high energy lasers have become hot research topics in laser physics over the past few decades. The physical sources of TOEs are the un-avoidable residual absorption and scattering in the volume and on the surface of passive and active laser elements. Therefore, it is necessary to characterize and mitigate these effects in real laser systems under high-power operations. (2) Methods: The laboratory setup comprised a 10-kW continuous wave laser source with a changeable beam diameter, and dynamic registration of the transient temperature profiles was applied using an infrared camera. Modeling using COMSOL Multiphysics enabled matching of the surface and volume absorption coefficients to the experimental data of the temperature profiles. The beam quality was estimated from the known optical path differences (OPDs) occurring within the examined sample. (3) Results: The absorption loss coefficients of dielectric coatings were determined for the evaluation of several coating technologies. Additionally, OPDs for typical transmissive and reflective elements were determined. (4) Conclusions: The idea of dynamic self-compensation of transient TOEs using a tailored design of the considered transmissive and reflecting elements is proposed.
- 8 October 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10802, 108020X
CYBERDOG: monitoring and control system for law enforcement forces K-9 special activities
This paper describes preliminary results of the interdisciplinary research and development venture lead by The Military University of Technology, Warsaw, Poland. The main task of the project is to develop remote solutions that support dogs guide during different special activities. According to the law-enforcement operational procedures, system has been designed basing on three different modules: special dogs electronic vest, mobile command center and supporting UAV (Unnamed Airborne Vehicle) platform. Project integrates such technologies as GNSS (Global Navigation Satellite System), IMU (Inertial Measurement Unit), remote sensing tools and UAV platforms as a support device. General idea of the project comes from boarder control and law-enforcement forces whose big scope of work is related with K-9 dogs activity. The main functionality of the system is to monitor and control the K-9 dog during high level risk operations. The biggest challenge of the project is to develop official training and operational procedures suitable to the applied technology. This article presents general concept of the system and the results of validation process in scope of remote sensing (NIR , RGB) and navigation functionalities (GNSS). The set of tests has been taken with different methods and tools to establish efficient ergonomic solution. Possibilities of project application areas are also shown here in details.
- 8 October 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10802, 108020X
CYBERDOG: monitoring and control system for law enforcement forces K-9 special activities
This paper describes preliminary results of the interdisciplinary research and development venture lead by The Military University of Technology, Warsaw, Poland. The main task of the project is to develop remote solutions that support dogs guide during different special activities. According to the law-enforcement operational procedures, system has been designed basing on three different modules: special dogs electronic vest, mobile command center and supporting UAV (Unnamed Airborne Vehicle) platform. Project integrates such technologies as GNSS (Global Navigation Satellite System), IMU (Inertial Measurement Unit), remote sensing tools and UAV platforms as a support device. General idea of the project comes from boarder control and law-enforcement forces whose big scope of work is related with K-9 dogs activity. The main functionality of the system is to monitor and control the K-9 dog during high level risk operations. The biggest challenge of the project is to develop official training and operational procedures suitable to the applied technology. This article presents general concept of the system and the results of validation process in scope of remote sensing (NIR , RGB) and navigation functionalities (GNSS). The set of tests has been taken with different methods and tools to establish efficient ergonomic solution. Possibilities of project application areas are also shown here in details.
- 14 August 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10830, 18
Mobile border verification of travellers based on fingerprints: experimental studies
The paper describes the results of experimental research on the mobile verification of travellers based on fingerprints. Three-day tests were carried out at the border crossing in Terespol, Poland. The developed system automatically acquires personal and biometric data (fingerprints) from the Polish biometric passport, determines their quality and compares with the live data collected from the traveller. In addition, the system measures the time of individual stages of the process and determines total transaction time. For total number of correctly scanned travellers equal to 128, false acceptance rate equals to 0, while rejection rate is less than 1%. The average transition time of border check was 37 seconds.
- 14 August 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10830, 18
Mobile border verification of travellers based on fingerprints: experimental studies
The paper describes the results of experimental research on the mobile verification of travellers based on fingerprints. Three-day tests were carried out at the border crossing in Terespol, Poland. The developed system automatically acquires personal and biometric data (fingerprints) from the Polish biometric passport, determines their quality and compares with the live data collected from the traveller. In addition, the system measures the time of individual stages of the process and determines total transaction time. For total number of correctly scanned travellers equal to 128, false acceptance rate equals to 0, while rejection rate is less than 1%. The average transition time of border check was 37 seconds.
- 6 October 2017
- Published by SPIE-Intl Soc Optical Eng
- p. 35
Comparison of parameters of modern cooled and uncooled thermal cameras
- 6 October 2017
- Published by SPIE-Intl Soc Optical Eng
- p. 35
Comparison of parameters of modern cooled and uncooled thermal cameras