Nancy J. McMillan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Nancy J. McMillan has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
Catherine E. McManus
4 shared publicationsBarbara L. Dutrow
Department of Geology and Geophysics, Louisiana State University, Baton Rouge, LA 70803, USA
2 shared publicationsAndrzej W. Miziolek
US Army Research Laboratory
1 shared publication- Anna VanDusen
Department of Geological Sciences, New Mexico State University, Las Cruces, NM 88003, USA
1 shared publication - April Ulery
Department of Plant and Environmental Sciences, New Mexico State University, Las Cruces, NM 88003, USA
1 shared publication - Bidemi Adedokun
Economic, Applied Statistic & International Business Department, New Mexico State University, P.O. Box 30001, MSC 3CQ, Las Cruces, NM 88003, USA
1 shared publication
Latest Publications
- Open Access
Application of Laser-Induced Breakdown Spectroscopy and Principal Component Analysis for Compositional Zoning of Liddicoatite Tourmaline from Anjanaboniona
Tourmalines from the Anjanabonoina pegmatite field, Central Madagascar, exhibit some of the most complex multi-color zoning patterns known. These tourmalines are also rare because of their unusual Ca- and Li-rich liddicoatite composition. Liddicoatite specimens crystallize in miarolitic pockets in pegmatites, which periodically break open and seal. Multivariate analysis of Laser-Induced Breakdown Spectroscopy (LIBS) spectra of an Anjanabonoina liddicoatite specimen allows evaluation of simultaneous changes in all elements during crystallization. LIBS is an optical emission technique in which photons emitted from a cooling laser plasma are diffracted and recorded as a spectrum. All elements present in the sample at concentrations above their inherent detection limits are represented by peaks in the spectrum. Principal Component Analysis of 123 LIBS spectra acquired in a core-to-rim traverse reveals six major compositional zones that suggest four stages of crystallization, the last three of which begin with the opening of the pocket and mixing of pegmatitic fluids with those from the metasedimentary host rocks.
Open AccessApplication of Laser-Induced Breakdown Spectroscopy and Principal Component Analysis for Compositional Zoning of Liddicoatite Tourmaline from Anjanaboniona
Tourmalines from the Anjanabonoina pegmatite field, Central Madagascar, exhibit some of the most complex multi-color zoning patterns known. These tourmalines are also rare because of their unusual Ca- and Li-rich liddicoatite composition. Liddicoatite specimens crystallize in miarolitic pockets in pegmatites, which periodically break open and seal. Multivariate analysis of Laser-Induced Breakdown Spectroscopy (LIBS) spectra of an Anjanabonoina liddicoatite specimen allows evaluation of simultaneous changes in all elements during crystallization. LIBS is an optical emission technique in which photons emitted from a cooling laser plasma are diffracted and recorded as a spectrum. All elements present in the sample at concentrations above their inherent detection limits are represented by peaks in the spectrum. Principal Component Analysis of 123 LIBS spectra acquired in a core-to-rim traverse reveals six major compositional zones that suggest four stages of crystallization, the last three of which begin with the opening of the pocket and mixing of pegmatitic fluids with those from the metasedimentary host rocks.
- Open Access
- 29 April 2024
- Published by Copernicus GmbH in European Journal of Mineralogy
- Vol. 36 (2) , 369-379
Laser-induced breakdown spectroscopy analysis of tourmaline: protocols, procedures, and predicaments
Laser-induced breakdown spectroscopy (LIBS) is an appropriate choice of analytical tool for analysis of complex minerals because it is rapid, requires little sample preparation, and acquires major and trace element compositional information on all naturally occurring elements at concentrations above their intrinsic levels of detection for the specific analyte material. Tourmaline, a complex borosilicate mineral supergroup, was chosen as a test mineral due to the complexity of its major and minor element composition. Four analytical issues were investigated during project development: (1) the spacing between analytical laser shots to avoid analysis of the recast from previous laser ablations, (2) the efficacy of using a cleaning shot prior to data acquisition, (3) the number of ablations required to collect an average spectrum that is representative of the tourmaline sample, and (4) the effect of spectrometer drift on principal component analysis (PCA) when using the entire LIBS spectra to model the compositional variations within the sample suite. The minimum spacing between locations of analysis was determined to be 800 µm for the analytical conditions used in this study by examining spectra acquired in a 2×2 grid across a quartz–tourmaline boundary. At a spacing of 100 µm, twice the diameter of the laser beam, the intensity of the boron I peaks at 249.68 and 249.77 nm was very low in the first location (quartz) but quite high in the fourth location (quartz) due to deposition of tourmaline-composition recast by laser shots in the second and third locations (both on tourmaline). Increasing the distance between locations to 800 µm ensured that the area analyzed largely avoided the recast layer from previous ablations. Given that the distribution of recast was taken into account, no cleaning shots were collected. PCA score plots calculated using successively larger numbers of spectra from the same sample show that a total of 64 spots, or 16 2×2 grids, are needed to acquire a representative average analysis of tourmaline. Spectrometer drift was recognized in PCA loading plots by a characteristic splitting of element peaks; half the peak indicates positive loading and the other half of the peak indicates negative loading. Drift correction was aligned by placing the Ca II peak at 393.34 nm in the 393.398 bin; this correction eliminated split peaks in loading plots. The resolution of these issues yielded LIBS spectra suitable for multivariate statistical analysis that can be applied to understanding geologic processes. These results contribute to the application of rapid LIBS analysis of complex geomaterials.
- 29 April 2024
- Published by Copernicus GmbH in European Journal of Mineralogy
- Vol. 36 (2) , 369-379
Open AccessLaser-induced breakdown spectroscopy analysis of tourmaline: protocols, procedures, and predicaments
Laser-induced breakdown spectroscopy (LIBS) is an appropriate choice of analytical tool for analysis of complex minerals because it is rapid, requires little sample preparation, and acquires major and trace element compositional information on all naturally occurring elements at concentrations above their intrinsic levels of detection for the specific analyte material. Tourmaline, a complex borosilicate mineral supergroup, was chosen as a test mineral due to the complexity of its major and minor element composition. Four analytical issues were investigated during project development: (1) the spacing between analytical laser shots to avoid analysis of the recast from previous laser ablations, (2) the efficacy of using a cleaning shot prior to data acquisition, (3) the number of ablations required to collect an average spectrum that is representative of the tourmaline sample, and (4) the effect of spectrometer drift on principal component analysis (PCA) when using the entire LIBS spectra to model the compositional variations within the sample suite. The minimum spacing between locations of analysis was determined to be 800 µm for the analytical conditions used in this study by examining spectra acquired in a 2×2 grid across a quartz–tourmaline boundary. At a spacing of 100 µm, twice the diameter of the laser beam, the intensity of the boron I peaks at 249.68 and 249.77 nm was very low in the first location (quartz) but quite high in the fourth location (quartz) due to deposition of tourmaline-composition recast by laser shots in the second and third locations (both on tourmaline). Increasing the distance between locations to 800 µm ensured that the area analyzed largely avoided the recast layer from previous ablations. Given that the distribution of recast was taken into account, no cleaning shots were collected. PCA score plots calculated using successively larger numbers of spectra from the same sample show that a total of 64 spots, or 16 2×2 grids, are needed to acquire a representative average analysis of tourmaline. Spectrometer drift was recognized in PCA loading plots by a characteristic splitting of element peaks; half the peak indicates positive loading and the other half of the peak indicates negative loading. Drift correction was aligned by placing the Ca II peak at 393.34 nm in the 393.398 bin; this correction eliminated split peaks in loading plots. The resolution of these issues yielded LIBS spectra suitable for multivariate statistical analysis that can be applied to understanding geologic processes. These results contribute to the application of rapid LIBS analysis of complex geomaterials.
- 17 March 2023
- Published by Wiley
- p. 211-227
Full‐Spectrum Multivariate Analysis of LIBS Data
- Open Access
Diamonds Certify Themselves: Multivariate Statistical Provenance Analysis
The country or mine of origin is an important economic and societal issue inherent in the diamond industry. Consumers increasingly want to know the provenance of their diamonds to ensure their purchase does not support inhumane working conditions. Governments around the world reduce the flow of conflict diamonds via paper certificates through the Kimberley Process, a United Nations mandate. However, certificates can be subject to fraud and do not provide a failsafe solution to stopping the flow of illicit diamonds. A solution tied to the diamonds themselves that can withstand the cutting and manufacturing process is required. Here, we show that multivariate analysis of LIBS (laser-induced breakdown spectroscopy) diamond spectra predicts the mine of origin at greater than 95% accuracy, distinguishes between natural and synthetic stones, and distinguishes between synthetic stones manufactured in different laboratories by different methods. Two types of spectral features, elemental emission peaks and emission clusters from C-N and C-C molecules, are significant in the analysis, indicating that the provenance signal is contained in the carbon structure itself rather than in inclusions.
Open AccessDiamonds Certify Themselves: Multivariate Statistical Provenance Analysis
The country or mine of origin is an important economic and societal issue inherent in the diamond industry. Consumers increasingly want to know the provenance of their diamonds to ensure their purchase does not support inhumane working conditions. Governments around the world reduce the flow of conflict diamonds via paper certificates through the Kimberley Process, a United Nations mandate. However, certificates can be subject to fraud and do not provide a failsafe solution to stopping the flow of illicit diamonds. A solution tied to the diamonds themselves that can withstand the cutting and manufacturing process is required. Here, we show that multivariate analysis of LIBS (laser-induced breakdown spectroscopy) diamond spectra predicts the mine of origin at greater than 95% accuracy, distinguishes between natural and synthetic stones, and distinguishes between synthetic stones manufactured in different laboratories by different methods. Two types of spectral features, elemental emission peaks and emission clusters from C-N and C-C molecules, are significant in the analysis, indicating that the provenance signal is contained in the carbon structure itself rather than in inclusions.
- Open Access
- 9 July 2020
- Published by MDPI AG in Soil Systems
- Vol. 4 (3) , 42
Visible Near-Infrared Reflectance and Laser-Induced Breakdown Spectroscopy for Estimating Soil Quality in Arid and Semiarid Agroecosystems
Visible near-infrared reflectance spectroscopy (VNIRS) and laser-induced breakdown spectroscopy (LIBS) are potential methods for the rapid and less expensive assessment of soil quality indicators (SQIs). The specific objective of this study was to compare VNIRS and LIBS for assessing SQIs. Data was collected from over 140 soil samples taken from multiple agricultural management systems in New Mexico, belonging to arid and semiarid agroecosystems. Sampled sites included New Mexico State University Agricultural Science Center research fields and several commercial farm fields in New Mexico. Partial least squares regression (PLSR) was used to establish predictive relationships between spectral data and SQIs. Fifteen soil measurements were modeled including the soil organic matter (SOM), permanganate oxidizable carbon (POXC), total microbial biomass (TMB), total bacteria biomass (TBB), total fungi biomass (TFB), mean weight diameter of dry aggregates (MWD), aggregates 2–4 mm (AGG > 2 mm), aggregates < 0.25 mm (AGG < 0.25 mm), wet aggregate stability (WAS), electrical conductivity (EC), calcium (Ca), magnesium (Mg), sodium (Na), and iron (Fe). Overall, calibrations based on measurements irrespective of locations performed better for LIBS and combined VNIRS-LIBS. Measurements separated according to locations highly improved the quality of prediction for VNIRS as compared to combined locations. For example, the prediction R2 values for regression of VNIRS were 0.19 for SOM, 0.30 for POXC, 0.24 for MWD, 0.15 for AGG > 2 mm, and 0.13 for EC in combined datasets irrespective of location. When separated according to locations, for one of the locations, the predictive R2 values for VNIRS were 0.48 for SOM, 0.70 for POXC, 0.67 for MWD, 0.60 for AGG > 2 mm, and 0.51 for EC. The prediction values varied with the sampling time for both LIBS and VNIRS. For example, the prediction values of some SQIs using VNIRS were higher in samples collected in winter for measurements, including SOM (0.90), MWD (0.96), WAS (0.66), and EC (0.94). Using the VNIRS, the corresponding predictive values for the same SQIs were lower for samples collected in the fall (SOM (0.61), MWD (0.45), WAS (0.46), and EC (0.65)). While this study illustrates the prospects of VNIRS and LIBS for estimating SQIs, a more comprehensive evaluation, using a larger regional dataset, is required to understand how the site and soil factors affect VNIRS and LIBS, in order to enhance the utility of these methods for soil quality assessment in arid and semiarid agroecosystems.
- 9 July 2020
- Published by MDPI AG in Soil Systems
- Vol. 4 (3) , 42
Open AccessVisible Near-Infrared Reflectance and Laser-Induced Breakdown Spectroscopy for Estimating Soil Quality in Arid and Semiarid Agroecosystems
Visible near-infrared reflectance spectroscopy (VNIRS) and laser-induced breakdown spectroscopy (LIBS) are potential methods for the rapid and less expensive assessment of soil quality indicators (SQIs). The specific objective of this study was to compare VNIRS and LIBS for assessing SQIs. Data was collected from over 140 soil samples taken from multiple agricultural management systems in New Mexico, belonging to arid and semiarid agroecosystems. Sampled sites included New Mexico State University Agricultural Science Center research fields and several commercial farm fields in New Mexico. Partial least squares regression (PLSR) was used to establish predictive relationships between spectral data and SQIs. Fifteen soil measurements were modeled including the soil organic matter (SOM), permanganate oxidizable carbon (POXC), total microbial biomass (TMB), total bacteria biomass (TBB), total fungi biomass (TFB), mean weight diameter of dry aggregates (MWD), aggregates 2–4 mm (AGG > 2 mm), aggregates < 0.25 mm (AGG < 0.25 mm), wet aggregate stability (WAS), electrical conductivity (EC), calcium (Ca), magnesium (Mg), sodium (Na), and iron (Fe). Overall, calibrations based on measurements irrespective of locations performed better for LIBS and combined VNIRS-LIBS. Measurements separated according to locations highly improved the quality of prediction for VNIRS as compared to combined locations. For example, the prediction R2 values for regression of VNIRS were 0.19 for SOM, 0.30 for POXC, 0.24 for MWD, 0.15 for AGG > 2 mm, and 0.13 for EC in combined datasets irrespective of location. When separated according to locations, for one of the locations, the predictive R2 values for VNIRS were 0.48 for SOM, 0.70 for POXC, 0.67 for MWD, 0.60 for AGG > 2 mm, and 0.51 for EC. The prediction values varied with the sampling time for both LIBS and VNIRS. For example, the prediction values of some SQIs using VNIRS were higher in samples collected in winter for measurements, including SOM (0.90), MWD (0.96), WAS (0.66), and EC (0.94). Using the VNIRS, the corresponding predictive values for the same SQIs were lower for samples collected in the fall (SOM (0.61), MWD (0.45), WAS (0.46), and EC (0.65)). While this study illustrates the prospects of VNIRS and LIBS for estimating SQIs, a more comprehensive evaluation, using a larger regional dataset, is required to understand how the site and soil factors affect VNIRS and LIBS, in order to enhance the utility of these methods for soil quality assessment in arid and semiarid agroecosystems.
- 23 October 2018
- Published by Mineralogical Association of Canada in The Canadian Mineralogist
- Vol. 56 (4) , 393-410
Identification of the Host Lithology of Tourmaline Using Laser-Induced Breakdown Spectroscopy For Application in Sediment Provenance and Mineral Exploration
Indicator minerals play a critical role in understanding Earth processes and in exploration for mineral resources. Tourmaline, a chemically complex boro-cyclosilicate, is a useful indicator mineral for provenance studies because its chemical signature reflects the environment during formation. Coupled with its lack of significant volume diffusion, even at high temperatures, and mechanical stability in clastic detrital environments, it retains textural and chemical fingerprints that may permit identification of the host rock lithology. To advance provenance determination by taking advantage of the complex chemistry of tourmaline, this study employs multivariate analysis of spectra acquired from Laser-Induced Breakdown Spectroscopy (LIBS). LIBS spectra contain information on the concentrations of nearly all elements and thus are ideal tools for modeling the complex compositional variations in tourmaline. The LIBS technique is especially sensitive to light elements such as Li, Be, and H and requires minimal sample preparation, allowing collection of data from many samples. A total of 189 spectra from 59 samples representing Li-rich pegmatites, Li-poor pegmatites, calcareous metamorphic rocks, pelitic metamorphic rocks, and hydrothermal deposits were modeled using the multivariate techniques Principal Component Analysis (PCA) and Partial Least Squares Regression (PLSR). A matching algorithm consisting of a series of four binary PLSR models was used to sequentially identify spectra belonging to the five lithologic groups. Success rates, defined as the percent of correctly classified spectra during test-set validation, range from 92% to 99%; the overall success rate is 96%. The success rate will likely improve with additional samples and more lithologic groupings. This approach is a promising new direction in analyzing large mineral data sets for determination of provenance. Such a tool could have widespread use for analyzing detrital tourmaline to establish sediment provenance and lithologic correlation as well as to utilize tourmaline to explore for mineral resources.
- 23 October 2018
- Published by Mineralogical Association of Canada in The Canadian Mineralogist
- Vol. 56 (4) , 393-410
Identification of the Host Lithology of Tourmaline Using Laser-Induced Breakdown Spectroscopy For Application in Sediment Provenance and Mineral Exploration
Indicator minerals play a critical role in understanding Earth processes and in exploration for mineral resources. Tourmaline, a chemically complex boro-cyclosilicate, is a useful indicator mineral for provenance studies because its chemical signature reflects the environment during formation. Coupled with its lack of significant volume diffusion, even at high temperatures, and mechanical stability in clastic detrital environments, it retains textural and chemical fingerprints that may permit identification of the host rock lithology. To advance provenance determination by taking advantage of the complex chemistry of tourmaline, this study employs multivariate analysis of spectra acquired from Laser-Induced Breakdown Spectroscopy (LIBS). LIBS spectra contain information on the concentrations of nearly all elements and thus are ideal tools for modeling the complex compositional variations in tourmaline. The LIBS technique is especially sensitive to light elements such as Li, Be, and H and requires minimal sample preparation, allowing collection of data from many samples. A total of 189 spectra from 59 samples representing Li-rich pegmatites, Li-poor pegmatites, calcareous metamorphic rocks, pelitic metamorphic rocks, and hydrothermal deposits were modeled using the multivariate techniques Principal Component Analysis (PCA) and Partial Least Squares Regression (PLSR). A matching algorithm consisting of a series of four binary PLSR models was used to sequentially identify spectra belonging to the five lithologic groups. Success rates, defined as the percent of correctly classified spectra during test-set validation, range from 92% to 99%; the overall success rate is 96%. The success rate will likely improve with additional samples and more lithologic groupings. This approach is a promising new direction in analyzing large mineral data sets for determination of provenance. Such a tool could have widespread use for analyzing detrital tourmaline to establish sediment provenance and lithologic correlation as well as to utilize tourmaline to explore for mineral resources.
- 1 July 2018
- Published by Elsevier in Spectrochimica Acta Part B: Atomic Spectroscopy
- Vol. 145, 79-85
Quantagenetics® analysis of laser-induced breakdown spectroscopic data: Rapid and accurate authentication of materials
- 1 July 2018
- Published by Elsevier in Spectrochimica Acta Part B: Atomic Spectroscopy
- Vol. 145, 79-85
Quantagenetics® analysis of laser-induced breakdown spectroscopic data: Rapid and accurate authentication of materials
- 14 August 2015
- Published by Mineralogical Society of America in American Mineralogist: Journal of Earth and Planetary Materials
- Vol. 100 (8-9) , 1921-1931
Provenance determination of sapphires and rubies using laser-induced breakdown spectroscopy and multivariate analysis
Determination of gem provenance is a topic of research in the gemological community for financial, security, and societal reasons. Laser-induced breakdown spectroscopy (LIBS) and multivariate analysis have the potential to revolutionize the field of gem provenance. This study acquired LIBS spectra from 569 rough sapphire and ruby specimens from 21 localities in 11 countries. The spectra were analyzed using the multivariate technique partial least-squares regression (PLSR) in separate algorithms for sapphires and rubies. Each algorithm consists of a series of PLS models. Each model compares the spectra from a locality of interest to the spectra from all other localities in the database. Success rates, as determined by the percent of correct provenance identifications, are 98.9% (sapphire) and 96.0% (ruby) for country of origin and 97.9% (sapphire) and 95.4% (ruby) for deposit of origin. Individual deposits are not recognized by the concentrations of a few elements; rather, the unique compositional signature of each deposit consists of the ratios of many elements, primarily Ca, Zr, Fe, Ba, Mt, Ti, Sr, Si, Cr, H, C, and Li, some of which may reside in inclusions. This work demonstrates that determination of country or deposit of origin may be related to a quantitative measure with a high level of success.
- 14 August 2015
- Published by Mineralogical Society of America in American Mineralogist: Journal of Earth and Planetary Materials
- Vol. 100 (8-9) , 1921-1931
Provenance determination of sapphires and rubies using laser-induced breakdown spectroscopy and multivariate analysis
Determination of gem provenance is a topic of research in the gemological community for financial, security, and societal reasons. Laser-induced breakdown spectroscopy (LIBS) and multivariate analysis have the potential to revolutionize the field of gem provenance. This study acquired LIBS spectra from 569 rough sapphire and ruby specimens from 21 localities in 11 countries. The spectra were analyzed using the multivariate technique partial least-squares regression (PLSR) in separate algorithms for sapphires and rubies. Each algorithm consists of a series of PLS models. Each model compares the spectra from a locality of interest to the spectra from all other localities in the database. Success rates, as determined by the percent of correct provenance identifications, are 98.9% (sapphire) and 96.0% (ruby) for country of origin and 97.9% (sapphire) and 95.4% (ruby) for deposit of origin. Individual deposits are not recognized by the concentrations of a few elements; rather, the unique compositional signature of each deposit consists of the ratios of many elements, primarily Ca, Zr, Fe, Ba, Mt, Ti, Sr, Si, Cr, H, C, and Li, some of which may reside in inclusions. This work demonstrates that determination of country or deposit of origin may be related to a quantitative measure with a high level of success.
- 4 August 2014
- Published by Wiley in Geostandards and Geoanalytical Research
- Vol. 38 (3) , 329-343
Geological Applications of Laser‐Induced Breakdown Spectroscopy
Laser‐induced breakdown spectroscopy (LIBS) records light emitted from the decay of electrons to lower‐energy orbitals during cooling of laser‐induced ablation plasmas; the resultant spectra can be used in a variety of geoanalytical applications. Four aspects of LIBS analysis distinguish LIBS from traditional laboratory‐based analytical techniques: (i) the lack of necessary sample preparation, allowing rapid analysis of many samples, (ii) the ability to analyse both 20 to 100 μm‐diameter spots and whole rocks, (iii) the detailed chemical signature contained in a LIBS spectrum and (iv) the ability to take LIBS into the field in backpack portable instrumentation. Three case studies illustrate potential applications of LIBS in the geosciences. First, analysis of the Carrizozo basalt flow in New Mexico, USA, illustrated that LIBS spectra could discriminate between samples of similar composition within uncertainties typical of whole‐rock analysis by X‐ray fluorescence spectrometry. Second, spectra from four sets of rubies from Madagascar and Tanzania illustrate the use of LIBS and multivariate analysis to determine provenance with success rates of > 95%. This technique can also be applied to correlation of units. Finally, a chemical map of a copper ore from Butte, MT, USA, illustrates the use of spatially defined LIBS spectra to understand chemical variations within textural context.
- 4 August 2014
- Published by Wiley in Geostandards and Geoanalytical Research
- Vol. 38 (3) , 329-343
Geological Applications of Laser‐Induced Breakdown Spectroscopy
Laser‐induced breakdown spectroscopy (LIBS) records light emitted from the decay of electrons to lower‐energy orbitals during cooling of laser‐induced ablation plasmas; the resultant spectra can be used in a variety of geoanalytical applications. Four aspects of LIBS analysis distinguish LIBS from traditional laboratory‐based analytical techniques: (i) the lack of necessary sample preparation, allowing rapid analysis of many samples, (ii) the ability to analyse both 20 to 100 μm‐diameter spots and whole rocks, (iii) the detailed chemical signature contained in a LIBS spectrum and (iv) the ability to take LIBS into the field in backpack portable instrumentation. Three case studies illustrate potential applications of LIBS in the geosciences. First, analysis of the Carrizozo basalt flow in New Mexico, USA, illustrated that LIBS spectra could discriminate between samples of similar composition within uncertainties typical of whole‐rock analysis by X‐ray fluorescence spectrometry. Second, spectra from four sets of rubies from Madagascar and Tanzania illustrate the use of LIBS and multivariate analysis to determine provenance with success rates of > 95%. This technique can also be applied to correlation of units. Finally, a chemical map of a copper ore from Butte, MT, USA, illustrates the use of spatially defined LIBS spectra to understand chemical variations within textural context.