Shigeru Kurosawa
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Shigeru Kurosawa has a total of 183 co-authors. Here are the top co-authors by number of shared publications:
Hidenobu Aizawa
Research Institute for Environmental Management Technology, National Institute of Advanced Industrial Science and Technology (AIST), AIST Tsukuba West
45 shared publicationsJong-Won Park
Institute for Environmental Management Technology, National Institute of Advanced Industrial Science and Technology (AIST), 1-1 Higashi, Tsukuba 305-8565, Japan
21 shared publicationsMinoru Yoshimoto
18 shared publicationsAkira Sekiya
National Institute of Materials and Chemical Research, 1-1 Higashi, Tsukuba, Ibaraki 305, Japan
10 shared publications- Minoru Yoshimoto
Department of Informatics, Graduate School of Science and Engineering, Kagoshima University, 1-21-40 Korimoto, Kagoshima 890-0065, JAPAN
9 shared publications Naoki Kamo
Hokkaido University
9 shared publications
Latest Publications
- 2 May 2023
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 127 (18) , 8788-8794
Temperature Dependence of Dynamic Properties of Poly(ethylene glycol) Molecules on a MHz-Oscillating Solid–Liquid Interface
- 2 May 2023
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 127 (18) , 8788-8794
Temperature Dependence of Dynamic Properties of Poly(ethylene glycol) Molecules on a MHz-Oscillating Solid–Liquid Interface
- Open Access
- 1 January 2022
- Published by Japan Oil Chemists' Society in Journal of Oleo Science
- Vol. 71 (6) , 905-913
Temperature Dependence of the Rheology of Soft Matter on a MHz-oscillating Solid-liquid Interface
The temperature dependence of the resonant length, molecular weight, and rheology (shear viscosity and shear modulus) of chemisorbed soft matter on a solid-liquid interface oscillating at a megahertz frequency was studied using a quartz crystal microbalance. As a form of chemisorbed soft matter, self-assembled monolayers (SAMs) formed from six types of mercapto oligo(ethylene oxide) methyl ethers were used. A systematic analysis using the Voigt model showed that the variation in effective hydrated thickness (sensed mass), which is related to the resonant length, was classified into three types based on the molecular weight. As a result, a 2.2-nm change in the resonant length occurred in the studied temperature range from 10 to 35℃. Moreover, the variation in the effective hydrated thickness was dependent on the shear viscosity and shear modulus of the SAMs. A further investigation revealed that the relationships η1∝Mn0.13 and μ1∝Mn0.30 could be estimated regardless of the temperature, where η1 and μ1 are the shear viscosity and shear modulus of the SAM, and Mn is the molecular weight of mercapto oligo(ethylene oxide) methyl ether. As a result, we revealed that the experimental results followed the polymer formula irrespective of temperature.
- 1 January 2022
- Published by Japan Oil Chemists' Society in Journal of Oleo Science
- Vol. 71 (6) , 905-913
Open AccessTemperature Dependence of the Rheology of Soft Matter on a MHz-oscillating Solid-liquid Interface
The temperature dependence of the resonant length, molecular weight, and rheology (shear viscosity and shear modulus) of chemisorbed soft matter on a solid-liquid interface oscillating at a megahertz frequency was studied using a quartz crystal microbalance. As a form of chemisorbed soft matter, self-assembled monolayers (SAMs) formed from six types of mercapto oligo(ethylene oxide) methyl ethers were used. A systematic analysis using the Voigt model showed that the variation in effective hydrated thickness (sensed mass), which is related to the resonant length, was classified into three types based on the molecular weight. As a result, a 2.2-nm change in the resonant length occurred in the studied temperature range from 10 to 35℃. Moreover, the variation in the effective hydrated thickness was dependent on the shear viscosity and shear modulus of the SAMs. A further investigation revealed that the relationships η1∝Mn0.13 and μ1∝Mn0.30 could be estimated regardless of the temperature, where η1 and μ1 are the shear viscosity and shear modulus of the SAM, and Mn is the molecular weight of mercapto oligo(ethylene oxide) methyl ether. As a result, we revealed that the experimental results followed the polymer formula irrespective of temperature.
- Open Access
- 15 January 2019
- Published by MYU K.K. in Sensors and Materials
- Vol. 31 (1) , 33-43
Sulfobetaine Polymers toward Application of Polydimethylsiloxane (PDMS) Surface Modification
- 15 January 2019
- Published by MYU K.K. in Sensors and Materials
- Vol. 31 (1) , 33-43
Open AccessSulfobetaine Polymers toward Application of Polydimethylsiloxane (PDMS) Surface Modification
- 27 July 2017
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 121 (31) , 16964-16969
Frequency Dependence of Dynamic Properties of Polyethylene Glycol Molecules on Oscillating Solid–Liquid Interface
- 27 July 2017
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 121 (31) , 16964-16969
Frequency Dependence of Dynamic Properties of Polyethylene Glycol Molecules on Oscillating Solid–Liquid Interface
- 1 February 2017
- Published by Elsevier in Chinese Journal of Physics
- Vol. 55 (1) , 16-21
Rheology of self-assembled monolayers on solid-liquid interface oscillating at MHz frequency
- 1 February 2017
- Published by Elsevier in Chinese Journal of Physics
- Vol. 55 (1) , 16-21
Rheology of self-assembled monolayers on solid-liquid interface oscillating at MHz frequency
- Open Access
- 1 January 2017
- Published by Japan Oil Chemists' Society in Journal of Oleo Science
- Vol. 66 (7) , 699-704
Surface Modification of PDMS and Plastics with Zwitterionic Polymers
Surface modification of PDMS, polycarbonate, and acrylic resin was examined using various methacryl polymers bearing sulfobetaine, phosphoryl choline, and oligoethylene glycol units. We have found that zwitterionic polymers are adsorbed on the PDMS surface treated with plasma. The surface of PDMS is stable to keep high hydrophilicity after a month of the modification. On the other hand, one of sulfobetaine polymers showed distinguished adsorption behavior in the case of polycarbonate surface treated with plasma. Suppression effect for nonspecific adsorption of BSA was evaluated using polycarbonate and acrylic resin modified with the polymers. The modified surfaces showed suppression effect for nonspecific adsorption of BSA compared with the surface only treated with plasma.
- 1 January 2017
- Published by Japan Oil Chemists' Society in Journal of Oleo Science
- Vol. 66 (7) , 699-704
Open AccessSurface Modification of PDMS and Plastics with Zwitterionic Polymers
Surface modification of PDMS, polycarbonate, and acrylic resin was examined using various methacryl polymers bearing sulfobetaine, phosphoryl choline, and oligoethylene glycol units. We have found that zwitterionic polymers are adsorbed on the PDMS surface treated with plasma. The surface of PDMS is stable to keep high hydrophilicity after a month of the modification. On the other hand, one of sulfobetaine polymers showed distinguished adsorption behavior in the case of polycarbonate surface treated with plasma. Suppression effect for nonspecific adsorption of BSA was evaluated using polycarbonate and acrylic resin modified with the polymers. The modified surfaces showed suppression effect for nonspecific adsorption of BSA compared with the surface only treated with plasma.
- 1 January 2015
- Published by Pharmaceutical Society of Japan in Chemical and Pharmaceutical Bulletin
- Vol. 63 (7) , 489-494
Novel pH-Responsive Polymeric Micelles Prepared through Self-assembly of Amphiphilic Block Copolymer with Poly-4-vinylpyridine Block Synthesized by Mechanochemical Solid-State Polymerization
We fabricated polymeric micelles containing 5-fluorouracil (5-FU) or fluorescein using the amphiphilic block copolymer, poly-4-vinylpyridine-b-6-O-methacryloyl galactopyranose. Although the polymeric micelles were stable at pH 7.4, they readily decomposed at pH 5, resulting in near complete release of 5-FU. Uptake of polymeric micelles containing fluorescein by HepG2 and HCT116 cells was also investigated. With both cell types, strong fluorescence was observed after a 12-h incubation, but the fluorescence weakened after 24 h of incubation. The fluorescein incorporated into the polymeric micelles was released into acidic organelles (endosome and/or lysosome), from which it diffused throughout the cell. The cytotoxicity of polymeric micelles containing 5-FU was evaluated against HepG2 cells using a CCK-8 assay. The results suggest that polymeric micelles containing 5-FU are more cytotoxic to HepG2 cells than free 5-FU.
- 1 January 2015
- Published by Pharmaceutical Society of Japan in Chemical and Pharmaceutical Bulletin
- Vol. 63 (7) , 489-494
Novel pH-Responsive Polymeric Micelles Prepared through Self-assembly of Amphiphilic Block Copolymer with Poly-4-vinylpyridine Block Synthesized by Mechanochemical Solid-State Polymerization
We fabricated polymeric micelles containing 5-fluorouracil (5-FU) or fluorescein using the amphiphilic block copolymer, poly-4-vinylpyridine-b-6-O-methacryloyl galactopyranose. Although the polymeric micelles were stable at pH 7.4, they readily decomposed at pH 5, resulting in near complete release of 5-FU. Uptake of polymeric micelles containing fluorescein by HepG2 and HCT116 cells was also investigated. With both cell types, strong fluorescence was observed after a 12-h incubation, but the fluorescence weakened after 24 h of incubation. The fluorescein incorporated into the polymeric micelles was released into acidic organelles (endosome and/or lysosome), from which it diffused throughout the cell. The cytotoxicity of polymeric micelles containing 5-FU was evaluated against HepG2 cells using a CCK-8 assay. The results suggest that polymeric micelles containing 5-FU are more cytotoxic to HepG2 cells than free 5-FU.
- 1 July 2014
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 118 (29) , 16067-16073
Dynamic Properties of Self-Assembled Monolayers of Mercapto Oligo(ethylene oxide) Methyl Ether on an Oscillating Solid–Liquid Interface
- 1 July 2014
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 118 (29) , 16067-16073
Dynamic Properties of Self-Assembled Monolayers of Mercapto Oligo(ethylene oxide) Methyl Ether on an Oscillating Solid–Liquid Interface
- Open Access
- 1 January 2014
- Published by Japan Oil Chemists' Society in Journal of Oleo Science
- Vol. 63 (1) , 75-82
Behavior of Polyethylene Glycol Molecules at an Oscillating Solid-Liquid Interface
The behavior of polyethylene glycol (PEG) molecules at an oscillating solid-liquid interface was examined using a quartz crystal microbalance (QCM). The number-average molecular weights (Mn) of PEG molecules were systematically varied. This study revealed that the shift in the energy dissipation factor, ΔD, of the QCM against square root of the density-viscosity product of the PEG solution is linear and has an intercept. Moreover, the systematical analysis revealed that the ΔD slope rapidly decreases with Mn, and the ΔD intercept becomes constant above 1.1×104 g/mol. Those results indicated that the resonant length of PEG molecules moving with the oscillating plate at 9 MHz is 97.6 Å. We also found that the difference between the resonant lengths calculated from ΔD and series resonance-frequency shift, ΔF, is related to the density of the thin PEG layer formed on the gold electrode.
- 1 January 2014
- Published by Japan Oil Chemists' Society in Journal of Oleo Science
- Vol. 63 (1) , 75-82
Open AccessBehavior of Polyethylene Glycol Molecules at an Oscillating Solid-Liquid Interface
The behavior of polyethylene glycol (PEG) molecules at an oscillating solid-liquid interface was examined using a quartz crystal microbalance (QCM). The number-average molecular weights (Mn) of PEG molecules were systematically varied. This study revealed that the shift in the energy dissipation factor, ΔD, of the QCM against square root of the density-viscosity product of the PEG solution is linear and has an intercept. Moreover, the systematical analysis revealed that the ΔD slope rapidly decreases with Mn, and the ΔD intercept becomes constant above 1.1×104 g/mol. Those results indicated that the resonant length of PEG molecules moving with the oscillating plate at 9 MHz is 97.6 Å. We also found that the difference between the resonant lengths calculated from ΔD and series resonance-frequency shift, ΔF, is related to the density of the thin PEG layer formed on the gold electrode.
- Open Access
- 1 January 2013
- Published by Japan Oil Chemists' Society in Journal of Oleo Science
- Vol. 62 (1) , 45-50
Physical properties of self-assembled monolayers of Mercapto Oligo (ethylene oxide) methyl ether on gold.
Physical properties (chemical adsorption rate, viscoelasticity, thickness, and conformation) for self-assembled monolayers (SAMs) of mercapto oligo (ethylene oxide) methyl ethers on gold were determined by quartz crystal microbalance (QCM). The values of thickness, shear viscosity and elastic shear modulus of SAMs increase with unit number of oligo (ethylene oxide) segment. However, the chemical adsorption rate determined by a Langmuir isotherm does not show such a unit number regularity. Those results suggest that difference in unit number of oligo (ethylene oxide) segment can significantly affects physical properties of SAMs.
- 1 January 2013
- Published by Japan Oil Chemists' Society in Journal of Oleo Science
- Vol. 62 (1) , 45-50
Open AccessPhysical properties of self-assembled monolayers of Mercapto Oligo (ethylene oxide) methyl ether on gold.
Physical properties (chemical adsorption rate, viscoelasticity, thickness, and conformation) for self-assembled monolayers (SAMs) of mercapto oligo (ethylene oxide) methyl ethers on gold were determined by quartz crystal microbalance (QCM). The values of thickness, shear viscosity and elastic shear modulus of SAMs increase with unit number of oligo (ethylene oxide) segment. However, the chemical adsorption rate determined by a Langmuir isotherm does not show such a unit number regularity. Those results suggest that difference in unit number of oligo (ethylene oxide) segment can significantly affects physical properties of SAMs.