Neil S. Hodnett
Research Subjects
Neil S. Hodnett has a total of 70 co-authors. Here are the top co-authors by number of shared publications:
- Guy Charles Lloyd-Jones
School of Chemistry, University of Edinburgh, Joseph Black Building, David Brewster Road, Edinburgh EH9 3FJ, U.K.
3 shared publications - Adrian Charles Whitwood
Department of Chemistry, University of York, York YO10 5DD, UK
2 shared publications - David R. Husbands
University of York
2 shared publications - Ian James Stewart Fairlamb
Department of Chemistry University of York York UK
2 shared publications - Katherine M. P. Wheelhouse
GSK Medicines Research Centre, Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2NY, UK
2 shared publications - Samir Diab
GlaxoSmithKline (GSK), Ware, UK
2 shared publications
Latest Publications
- Open Access
- 23 October 2024
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 15 (44) , 18627-18633
The ubiquitous P(o-tol)3 ligand promotes formation of catalytically-active higher order palladacyclic clusters
Higher order palladacyclic Pdn clusters, containing tri-ortho-tolyl phosphine, are active cross-coupling (pre)catalysts.
- 23 October 2024
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 15 (44) , 18627-18633
Open AccessThe ubiquitous P(o-tol)3 ligand promotes formation of catalytically-active higher order palladacyclic clusters
Higher order palladacyclic Pdn clusters, containing tri-ortho-tolyl phosphine, are active cross-coupling (pre)catalysts.
- Open Access
- 9 August 2024
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 14 (17) , 12769-12782
Revealing the Hidden Complexity and Reactivity of Palladacyclic Precatalysts: The P(o-tolyl)3 Ligand Enables a Cocktail of Active Species Utilizing the Pd(II)/Pd(IV) and Pd(0)/Pd(II) Pathways for Efficient Catalysis
The ligand, P(o-tolyl)3, is ubiquitous in applied synthetic chemistry and catalysis, particularly in Pd-catalyzed processes, which typically include Pd(OAc)2 (most commonly used as Pd3(OAc)6) as a precatalyst. The Herrmann-Beller palladacycle [Pd(C^P)(μ2-OAc)]2 (where C^P = monocyclopalladated P(o-tolyl)3) is easily formed from reaction of Pd(OAc)2 with P(o-tolyl)3. The mechanisms by which this precatalyst system operates are inherently complex, with studies previously implicating Pd nanoparticles (PdNPs) as reservoirs for active Pd(0) species in arylative cross-coupling reactions. In this study, we reveal the fascinating, complex, and nontrivial behavior of the palladacyclic group. First, in the presence of hydroxide base, [Pd(C^P)(μ2-OAc)]2 is readily converted into an activated form, [Pd(C^P)(μ2-OH)]2, which serves as a conduit for activation to catalytically relevant species. Second, palladacyclization imparts unique stability for catalytic species under reaction conditions, bringing into play a Pd(II)/Pd(IV) cross-coupling mechanism. For a benchmark Suzuki-Miyaura cross-coupling (SMCC) reaction, there is a shift from a mononuclear Pd catalytic pathway to a PdNP-controlled catalytic pathway during the reaction. The activation pathway of [Pd(C^P)(μ2-OH)]2 has been studied using an arylphosphine-stabilized boronic acid and low-temperature NMR spectroscopic analysis, which sheds light on the preactivation step, with water and/or acid being critical for the formation of active Pd(0) and Pd(II) species. In situ reaction monitoring has demonstrated that there is a sensitivity to the structure of the arylboron species in the presence of pinacol. This work, taken together, highlights the mechanistic complexity accompanying the use of palladacyclic precatalyst systems. It builds on recent findings involving related Pd(OAc)2/PPh3 precatalyst systems which readily form higher order Pdn clusters and PdNPs under cross-coupling reaction conditions. Thus, generally, one needs to be cautious with the assumption that Pd(OAc)2/tertiary phosphine mixtures cleanly deliver mononuclear "Pd(0)Ln" species and that any assessment of individual phosphine ligands may need to be taken on a case-by-case basis.
- 9 August 2024
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 14 (17) , 12769-12782
Open AccessRevealing the Hidden Complexity and Reactivity of Palladacyclic Precatalysts: The P(o-tolyl)3 Ligand Enables a Cocktail of Active Species Utilizing the Pd(II)/Pd(IV) and Pd(0)/Pd(II) Pathways for Efficient Catalysis
The ligand, P(o-tolyl)3, is ubiquitous in applied synthetic chemistry and catalysis, particularly in Pd-catalyzed processes, which typically include Pd(OAc)2 (most commonly used as Pd3(OAc)6) as a precatalyst. The Herrmann-Beller palladacycle [Pd(C^P)(μ2-OAc)]2 (where C^P = monocyclopalladated P(o-tolyl)3) is easily formed from reaction of Pd(OAc)2 with P(o-tolyl)3. The mechanisms by which this precatalyst system operates are inherently complex, with studies previously implicating Pd nanoparticles (PdNPs) as reservoirs for active Pd(0) species in arylative cross-coupling reactions. In this study, we reveal the fascinating, complex, and nontrivial behavior of the palladacyclic group. First, in the presence of hydroxide base, [Pd(C^P)(μ2-OAc)]2 is readily converted into an activated form, [Pd(C^P)(μ2-OH)]2, which serves as a conduit for activation to catalytically relevant species. Second, palladacyclization imparts unique stability for catalytic species under reaction conditions, bringing into play a Pd(II)/Pd(IV) cross-coupling mechanism. For a benchmark Suzuki-Miyaura cross-coupling (SMCC) reaction, there is a shift from a mononuclear Pd catalytic pathway to a PdNP-controlled catalytic pathway during the reaction. The activation pathway of [Pd(C^P)(μ2-OH)]2 has been studied using an arylphosphine-stabilized boronic acid and low-temperature NMR spectroscopic analysis, which sheds light on the preactivation step, with water and/or acid being critical for the formation of active Pd(0) and Pd(II) species. In situ reaction monitoring has demonstrated that there is a sensitivity to the structure of the arylboron species in the presence of pinacol. This work, taken together, highlights the mechanistic complexity accompanying the use of palladacyclic precatalyst systems. It builds on recent findings involving related Pd(OAc)2/PPh3 precatalyst systems which readily form higher order Pdn clusters and PdNPs under cross-coupling reaction conditions. Thus, generally, one needs to be cautious with the assumption that Pd(OAc)2/tertiary phosphine mixtures cleanly deliver mononuclear "Pd(0)Ln" species and that any assessment of individual phosphine ligands may need to be taken on a case-by-case basis.
- 26 July 2023
- Published by American Chemical Society (ACS) in Molecular Pharmaceutics
- Vol. 20 (8) , 3886-3894
Kinetic Barriers to Disproportionation of Salts of Weakly Basic Drugs
Disproportionation is a major issuein formulations containingsalts of weakly basic drugs. Despite considerable interest in riskassessment approaches for disproportionation, the prediction of salt-to-baseconversion remains challenging. Recent studies have highlighted severalconfounding factors other than pH(max) that appear to playan important role in salt disproportionation and have suggested thatkinetic barriers need to be considered in addition to the thermodynamicdriving force when assessing the risk of a salt to undergo conversionto parent free base. Herein, we describe the concurrent applicationof in situ Raman spectroscopy and pH monitoring toinvestigate the disproportionation kinetics of three model salts,pioglitazone hydrochloride, sorafenib tosylate, and atazanavir sulfate,in aqueous slurries. We found that even for favorable thermodynamicconditions (i.e., pH >> pH(max)),disproportionation kinetics of the salts were very different despiteeach system having a similar pH(max) . Theimportance of free base nucleation kinetics was highlighted by theobservation that the disproportionation conversion time in the slurriesshowed the same trend as the free base nucleation induction time.Pioglitazone hydrochloride, with a free base induction time of > pH(max). Additionally, we alteredan established thermodynamically based modeling framework to accountfor kinetic effects (representing the nucleation kinetic barrier)to estimate the solid-state stability of salt formulations. In conclusion,a solution-based thermodynamic model is mechanistically appropriateto predict salt disproportionation in a solid-state formulation, whenkinetic barriers are also taken into consideration.
- 26 July 2023
- Published by American Chemical Society (ACS) in Molecular Pharmaceutics
- Vol. 20 (8) , 3886-3894
Kinetic Barriers to Disproportionation of Salts of Weakly Basic Drugs
Disproportionation is a major issuein formulations containingsalts of weakly basic drugs. Despite considerable interest in riskassessment approaches for disproportionation, the prediction of salt-to-baseconversion remains challenging. Recent studies have highlighted severalconfounding factors other than pH(max) that appear to playan important role in salt disproportionation and have suggested thatkinetic barriers need to be considered in addition to the thermodynamicdriving force when assessing the risk of a salt to undergo conversionto parent free base. Herein, we describe the concurrent applicationof in situ Raman spectroscopy and pH monitoring toinvestigate the disproportionation kinetics of three model salts,pioglitazone hydrochloride, sorafenib tosylate, and atazanavir sulfate,in aqueous slurries. We found that even for favorable thermodynamicconditions (i.e., pH >> pH(max)),disproportionation kinetics of the salts were very different despiteeach system having a similar pH(max) . Theimportance of free base nucleation kinetics was highlighted by theobservation that the disproportionation conversion time in the slurriesshowed the same trend as the free base nucleation induction time.Pioglitazone hydrochloride, with a free base induction time of > pH(max). Additionally, we alteredan established thermodynamically based modeling framework to accountfor kinetic effects (representing the nucleation kinetic barrier)to estimate the solid-state stability of salt formulations. In conclusion,a solution-based thermodynamic model is mechanistically appropriateto predict salt disproportionation in a solid-state formulation, whenkinetic barriers are also taken into consideration.
- Open Access
- 7 March 2023
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 14 (20) , 5323-5331
Computer vision for non-contact monitoring of catalyst degradation and product formation kinetics
We report a computer vision strategy for the extraction and colorimetric analysis of catalyst degradation and product-formation kinetics from video footage. The degradation of palladium(II) pre-catalyst systems to form ‘Pd black’ is investigated as a widely relevant case study for catalysis and materials chemistries. Beyond the study of catalysts in isolation, investigation of Pd-catalyzed Miyaura borylation reactions revealed informative correlations between colour parameters (most notably ΔE, a colour-agnostic measure of contrast change) and the concentration of product measured by off-line analysis (NMR and LC-MS). The breakdown of such correlations helped inform conditions under which reaction vessels were compromised by air ingress. These findings present opportunities to expand the toolbox of non-invasive analytical techniques, operationally cheaper and simpler to implement than common spectroscopic methods. The approach introduces the capability of analyzing the macroscopic ‘bulk’ for the study of reaction kinetics in complex mixtures, in complement to the more common study of microscopic and molecular specifics.
- 7 March 2023
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 14 (20) , 5323-5331
Open AccessComputer vision for non-contact monitoring of catalyst degradation and product formation kinetics
We report a computer vision strategy for the extraction and colorimetric analysis of catalyst degradation and product-formation kinetics from video footage. The degradation of palladium(II) pre-catalyst systems to form ‘Pd black’ is investigated as a widely relevant case study for catalysis and materials chemistries. Beyond the study of catalysts in isolation, investigation of Pd-catalyzed Miyaura borylation reactions revealed informative correlations between colour parameters (most notably ΔE, a colour-agnostic measure of contrast change) and the concentration of product measured by off-line analysis (NMR and LC-MS). The breakdown of such correlations helped inform conditions under which reaction vessels were compromised by air ingress. These findings present opportunities to expand the toolbox of non-invasive analytical techniques, operationally cheaper and simpler to implement than common spectroscopic methods. The approach introduces the capability of analyzing the macroscopic ‘bulk’ for the study of reaction kinetics in complex mixtures, in complement to the more common study of microscopic and molecular specifics.
- 19 January 2022
- Published by Springer Nature in Journal of Pharmaceutical Innovation
- Vol. 17 (4) , 1333-1346
Application of a System Model for Continuous Manufacturing of an Active Pharmaceutical Ingredient in an Industrial Environment
- 19 January 2022
- Published by Springer Nature in Journal of Pharmaceutical Innovation
- Vol. 17 (4) , 1333-1346
Application of a System Model for Continuous Manufacturing of an Active Pharmaceutical Ingredient in an Industrial Environment
- 18 February 2020
- Published by American Chemical Society (ACS) in Organic Process Research & Development
- Vol. 24 (3) , 371-386
Development of a Scalable Process for the PPAR-α Agonist GW641597X Incorporating Baeyer–Villiger Chemistry and Retrospective ICH M7 Assessment
- 18 February 2020
- Published by American Chemical Society (ACS) in Organic Process Research & Development
- Vol. 24 (3) , 371-386
Development of a Scalable Process for the PPAR-α Agonist GW641597X Incorporating Baeyer–Villiger Chemistry and Retrospective ICH M7 Assessment
- 22 December 2017
- Published by American Chemical Society (ACS) in Organic Process Research & Development
- Vol. 22 (1) , 54-61
High-Throughput Automated Design of Experiment (DoE) and Kinetic Modeling to Aid in Process Development of an API
- 22 December 2017
- Published by American Chemical Society (ACS) in Organic Process Research & Development
- Vol. 22 (1) , 54-61
High-Throughput Automated Design of Experiment (DoE) and Kinetic Modeling to Aid in Process Development of an API
- 1 August 2017
- Published by Elsevier in European Journal of Pharmaceutics and Biopharmaceutics
- Vol. 117, 224-231
Identification and characterisation of a salt form of Danirixin with reduced pharmacokinetic variability in patient populations
- 1 August 2017
- Published by Elsevier in European Journal of Pharmaceutics and Biopharmaceutics
- Vol. 117, 224-231
Identification and characterisation of a salt form of Danirixin with reduced pharmacokinetic variability in patient populations
- 15 July 2016
- Published by Springer Nature in AAPS PharmSciTech
- Vol. 18 (4) , 1158-1176
Kinetic Model Development for Accelerated Stability Studies
Accelerated stability coupled with modeling to predict the stability of compounds, blends, and products at long-term storage conditions provides significant benefits in science-based decision-making throughout drug substance and drug product development. The study can often be completed, including data analysis in the space of three working weeks, and the information gathered and learning made in this time period can rival years of traditional analysis. The speed of the studies allows an earlier assessment of risk to quality enabling appropriate risk mitigation strategies to be implemented in a timely manner. The scientific foundation is based upon Arrhenius kinetic equations that can be linear or nonlinear in time, and can be based upon water vapor pressure or liquid water activity (relative humidity). A variety of kinetic models are evaluated, and the best model is chosen based upon both Bayesian information criteria and an automated assessment of kinetic model parameters fitting within acceptable ranges. Confidence intervals are estimated based upon a bootstrapping approach. Moisture vapor transmission rate models are applied on top of the resulting kinetic models in order to simulate different packaging types and the use of desiccant. The kinetic models are integrated with the prediction of packaging humidity over time to create a long-term prediction of impurities and other phenomena. The resulting models have been shown to be useful for not only the prediction of drug product impurities in long-term storage but other physical phenomena as well such as hydrate development and solvate loss.
- 15 July 2016
- Published by Springer Nature in AAPS PharmSciTech
- Vol. 18 (4) , 1158-1176
Kinetic Model Development for Accelerated Stability Studies
Accelerated stability coupled with modeling to predict the stability of compounds, blends, and products at long-term storage conditions provides significant benefits in science-based decision-making throughout drug substance and drug product development. The study can often be completed, including data analysis in the space of three working weeks, and the information gathered and learning made in this time period can rival years of traditional analysis. The speed of the studies allows an earlier assessment of risk to quality enabling appropriate risk mitigation strategies to be implemented in a timely manner. The scientific foundation is based upon Arrhenius kinetic equations that can be linear or nonlinear in time, and can be based upon water vapor pressure or liquid water activity (relative humidity). A variety of kinetic models are evaluated, and the best model is chosen based upon both Bayesian information criteria and an automated assessment of kinetic model parameters fitting within acceptable ranges. Confidence intervals are estimated based upon a bootstrapping approach. Moisture vapor transmission rate models are applied on top of the resulting kinetic models in order to simulate different packaging types and the use of desiccant. The kinetic models are integrated with the prediction of packaging humidity over time to create a long-term prediction of impurities and other phenomena. The resulting models have been shown to be useful for not only the prediction of drug product impurities in long-term storage but other physical phenomena as well such as hydrate development and solvate loss.
- 12 January 2012
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 51 (7) , 1526-1533
The Even‐Handed Approach: Strategies for the Deployment of Racemic Chiral Catalysts
Asymmetric catalysis is predominantly associated with the use of enantiomerically pure chiral ligands and catalysts. Although racemic chiral catalysts have been employed quite extensively in polymerization, their utility in mainstream organic synthesis and catalyst development has arguably been rather overlooked. This Minireview collates various themes for the strategic application of racemic ligands and catalysts, ranging from the estimation of selectivity and determination of enantiomeric excess, through to control of regio‐ and stereochemical outcomes, and mechanistic studies. What emerges is a clear picture that, in isolation or in concert with enantiopure catalysts, the “even‐handed” approach has much to offer.
- 12 January 2012
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 51 (7) , 1526-1533
The Even‐Handed Approach: Strategies for the Deployment of Racemic Chiral Catalysts
Asymmetric catalysis is predominantly associated with the use of enantiomerically pure chiral ligands and catalysts. Although racemic chiral catalysts have been employed quite extensively in polymerization, their utility in mainstream organic synthesis and catalyst development has arguably been rather overlooked. This Minireview collates various themes for the strategic application of racemic ligands and catalysts, ranging from the estimation of selectivity and determination of enantiomeric excess, through to control of regio‐ and stereochemical outcomes, and mechanistic studies. What emerges is a clear picture that, in isolation or in concert with enantiopure catalysts, the “even‐handed” approach has much to offer.