Pavel Anatolievich Drogovoz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Pavel Anatolievich Drogovoz has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
- Elena A. Fedorovau
Financial University under the Government of the Russian Federation
4 shared publications - Konstantin Vladimirovich Osintsev
South Ural State University
4 shared publications - Aleksandr R. Nevredinov
Institute of Financial and Industrial Policy, Financial University under Government of Russian Federation
3 shared publications - Evgeniya Nikolaevna Gorlacheva
Bauman Moscow State Technical University
3 shared publications - Nikita Anatolyevich Pshenisnov
South Ural State University (National Research University)
3 shared publications - Sergei V. Aliukov
Department of Business Informatics, Bauman Moscow State Technical University, Moscow 105005, Russia
3 shared publications
Latest Publications
- Open Access
A Comparative Numerical Analysis of the Energy Efficiency of a Pneumatic Pressure Booster with Energy Recovery
Pneumatic systems are widely used in industry; however, compressed air remains an expensive energy source. To save energy, supply pressure is often reduced, but this leads to insufficient pressure in specific sections of the pneumatic circuit that require higher pressure. Pneumatic pressure boosters (PPBs) are used to address this issue, yet traditional designs lose a significant amount of energy during the exhaust phase. This paper proposes a pressure booster with energy recovery (PPB-R), in which the energy of the exhaust air is directed into an additional expansion chamber to perform useful work by moving the piston. A comparative numerical analysis of the energy efficiency of the PPB and PPB-R was conducted using the “air power” method. A mathematical model of the system was developed, incorporating force and mass flow balance equations under an isothermal assumption, with friction forces estimated from experimental data. The results indicate that the energy efficiency of the PPB-R may exceed that of the standard PPB by 3–6%, and its boost ratio improvement increases from about 3% at 200 kPa to 13% at 800 kPa. Furthermore, optimal expansion chamber diameters were determined for different supply pressures (85, 95, and 110 mm at 300, 500, and 800 kPa, respectively). The established pressure–flow characteristics confirm that the PPB-R maintains a nearly constant relative pressure advantage of about 15% under all load conditions. A quantitative energy balance shows that approximately 66% of the recovered energy is converted into additional useful output. The practical significance of this work lies in the potential to reduce compressor outlet pressure (thereby saving electricity) or to increase pressure at the point of use without increasing air consumption. The findings can be applied to the design and modernization of industrial pneumatic systems.
Open AccessA Comparative Numerical Analysis of the Energy Efficiency of a Pneumatic Pressure Booster with Energy Recovery
Pneumatic systems are widely used in industry; however, compressed air remains an expensive energy source. To save energy, supply pressure is often reduced, but this leads to insufficient pressure in specific sections of the pneumatic circuit that require higher pressure. Pneumatic pressure boosters (PPBs) are used to address this issue, yet traditional designs lose a significant amount of energy during the exhaust phase. This paper proposes a pressure booster with energy recovery (PPB-R), in which the energy of the exhaust air is directed into an additional expansion chamber to perform useful work by moving the piston. A comparative numerical analysis of the energy efficiency of the PPB and PPB-R was conducted using the “air power” method. A mathematical model of the system was developed, incorporating force and mass flow balance equations under an isothermal assumption, with friction forces estimated from experimental data. The results indicate that the energy efficiency of the PPB-R may exceed that of the standard PPB by 3–6%, and its boost ratio improvement increases from about 3% at 200 kPa to 13% at 800 kPa. Furthermore, optimal expansion chamber diameters were determined for different supply pressures (85, 95, and 110 mm at 300, 500, and 800 kPa, respectively). The established pressure–flow characteristics confirm that the PPB-R maintains a nearly constant relative pressure advantage of about 15% under all load conditions. A quantitative energy balance shows that approximately 66% of the recovered energy is converted into additional useful output. The practical significance of this work lies in the potential to reduce compressor outlet pressure (thereby saving electricity) or to increase pressure at the point of use without increasing air consumption. The findings can be applied to the design and modernization of industrial pneumatic systems.
- Open Access
Energy and Exergy Analysis of a Combined Cycle Power Plant with Ice Thermal Energy Storage-Based Inlet Air Cooling
In hot arid climates, combined cycle power plants (CCPPs) can experience reduced performance as high ambient temperature increases compressor inlet temperature and specific compression work. This study develops a steady-state energy, exergy, and exergoeconomic model of a 750 MW CCPP integrated with an ice thermal energy storage (ITES) cooling subsystem under Basra, Iraq, climatic conditions. Four configurations are evaluated: a standard plant without cooling, compressor-inlet cooling, air-cooled-condenser (ACC) inlet cooling, and simultaneous dual-point cooling of the compressor and ACC inlet air. Twelve monthly meteorological conditions are used to characterize the seasonal operating envelope, while the annual-mean condition is used for the comparative optimization. Four objective functions are evaluated through independent single-objective genetic-algorithm (GA) runs: minimization of total operating cost rate, minimization of fuel cost rate, maximization of thermal efficiency, and maximization of exergy efficiency. The reported optimization results are therefore objective-specific rather than a single Pareto multi-objective optimum. At the common total-operating-cost objective, the reported optimum gives 9.468 × 10−3 USD/s for Case 2, 8.993 × 10−3 USD/s for Case 3, and 8.993 × 10−3 USD/s for Case 4, compared with 9.721 × 10−3 USD/s for the standard case. Under the corresponding Case-3 and Case-4 total-cost runs, the thermal efficiency is 49.44%, compared with 48.86% for the standard case. Exergy analysis shows that the combustion chamber remains the dominant source of exergy destruction. The results quantify the thermodynamic and economic effects of the alternative cooling configurations within the adopted steady-state model, while the transient charge/discharge behavior of the ITES tank remains outside the present model boundary.
Open AccessEnergy and Exergy Analysis of a Combined Cycle Power Plant with Ice Thermal Energy Storage-Based Inlet Air Cooling
In hot arid climates, combined cycle power plants (CCPPs) can experience reduced performance as high ambient temperature increases compressor inlet temperature and specific compression work. This study develops a steady-state energy, exergy, and exergoeconomic model of a 750 MW CCPP integrated with an ice thermal energy storage (ITES) cooling subsystem under Basra, Iraq, climatic conditions. Four configurations are evaluated: a standard plant without cooling, compressor-inlet cooling, air-cooled-condenser (ACC) inlet cooling, and simultaneous dual-point cooling of the compressor and ACC inlet air. Twelve monthly meteorological conditions are used to characterize the seasonal operating envelope, while the annual-mean condition is used for the comparative optimization. Four objective functions are evaluated through independent single-objective genetic-algorithm (GA) runs: minimization of total operating cost rate, minimization of fuel cost rate, maximization of thermal efficiency, and maximization of exergy efficiency. The reported optimization results are therefore objective-specific rather than a single Pareto multi-objective optimum. At the common total-operating-cost objective, the reported optimum gives 9.468 × 10−3 USD/s for Case 2, 8.993 × 10−3 USD/s for Case 3, and 8.993 × 10−3 USD/s for Case 4, compared with 9.721 × 10−3 USD/s for the standard case. Under the corresponding Case-3 and Case-4 total-cost runs, the thermal efficiency is 49.44%, compared with 48.86% for the standard case. Exergy analysis shows that the combustion chamber remains the dominant source of exergy destruction. The results quantify the thermodynamic and economic effects of the alternative cooling configurations within the adopted steady-state model, while the transient charge/discharge behavior of the ITES tank remains outside the present model boundary.
- Open Access
Numerical Study of Natural Convection in a Corrugated Porous Cavity Saturated with a Nanofluid of Al2O3–Cu/Water Hybrid Type: The Combined Effect of Variable Viscosity and Soret–Dufour Double-Diffusion
This study numerically investigates unsteady natural convection and Soret–Dufour double-diffusion in a two-dimensional sinusoidally wavy porous cavity saturated with an Al2O3–Cu/Water hybrid nanofluid (φ = 0.02), using a Darcy–Brinkman formulation with temperature-dependent viscosity and Rosseland thermal radiation. The governing equations are solved on a boundary-fitted grid; an independent Method of Manufactured Solutions verification confirms second-order accuracy, with a finest-grid (120 × 120) L2 error of 2.6807 × 10−5 and a fine-grid GCI of 0.013225%. Within the investigated dimensionless range, Nuavg increases with the Rayleigh number, wall-wave amplitude, radiation parameter, and viscosity-thinning magnitude, while the hybrid nanofluid yields a 2.8–3.2% enhancement over pure water. Because no independent experimental measurements or complete dimensional operating envelope are available, the reported engineering implications are presented as model-based guidance rather than validated design prescriptions.
Open AccessNumerical Study of Natural Convection in a Corrugated Porous Cavity Saturated with a Nanofluid of Al2O3–Cu/Water Hybrid Type: The Combined Effect of Variable Viscosity and Soret–Dufour Double-Diffusion
This study numerically investigates unsteady natural convection and Soret–Dufour double-diffusion in a two-dimensional sinusoidally wavy porous cavity saturated with an Al2O3–Cu/Water hybrid nanofluid (φ = 0.02), using a Darcy–Brinkman formulation with temperature-dependent viscosity and Rosseland thermal radiation. The governing equations are solved on a boundary-fitted grid; an independent Method of Manufactured Solutions verification confirms second-order accuracy, with a finest-grid (120 × 120) L2 error of 2.6807 × 10−5 and a fine-grid GCI of 0.013225%. Within the investigated dimensionless range, Nuavg increases with the Rayleigh number, wall-wave amplitude, radiation parameter, and viscosity-thinning magnitude, while the hybrid nanofluid yields a 2.8–3.2% enhancement over pure water. Because no independent experimental measurements or complete dimensional operating envelope are available, the reported engineering implications are presented as model-based guidance rather than validated design prescriptions.
- Open Access
Hydrodynamic and Thermal Characterization of Steady MHD Flow in Channels and Pipes Considering Viscous Dissipation and Joule Heating
This study presents a comparative sensitivity analysis of the Hartmann number (Ha) and Brinkman number (Br) on magnetohydrodynamic (MHD) flow in rectangular channels and circular pipes. Normalized sensitivity coefficients quantify the response of key metrics, including velocity, wall shear stress, temperature, and convective heat transfer, with validation against recent experimental and numerical studies. The system equations were solved through a coupled analytical–numerical method coded in Python 3.14; velocity field was solved analytically whereas temperature field was discretized using a finite differences scheme and solved numerically using the Thomas algorithm. The entire code was written by the authors. The results show that Ha predominantly governs hydrodynamics, inducing velocity suppression, flow flattening, and enhanced wall shear stress. Rectangular channels experience stronger Hartmann layer effects, while circular pipes exhibit smoother velocity profiles. Conversely, Br primarily controls thermal behavior, with higher values intensifying internal heat generation and elevating centerline temperature, potentially attenuating the average Nusselt number at high Br levels. Nonlinear Ha–Br interactions define distinct operational regimes, from heat transfer enhancement to thermal degradation. Optimal performance windows are identified: Ha ≈ 8–12 and Br ≈ 0.05–0.3 for channels, and Ha ≈ 10–15 and Br ≈ 0.1–0.4 for pipes, balancing thermal and hydraulic efficiency. Deviations from benchmark studies remain within ±5%, confirming predictive reliability. This work provides practical design guidance for advanced MHD thermal systems and establishes a foundation for future studies on temperature-dependent properties, three-dimensional effects, and complex flow regimes.
Open AccessHydrodynamic and Thermal Characterization of Steady MHD Flow in Channels and Pipes Considering Viscous Dissipation and Joule Heating
This study presents a comparative sensitivity analysis of the Hartmann number (Ha) and Brinkman number (Br) on magnetohydrodynamic (MHD) flow in rectangular channels and circular pipes. Normalized sensitivity coefficients quantify the response of key metrics, including velocity, wall shear stress, temperature, and convective heat transfer, with validation against recent experimental and numerical studies. The system equations were solved through a coupled analytical–numerical method coded in Python 3.14; velocity field was solved analytically whereas temperature field was discretized using a finite differences scheme and solved numerically using the Thomas algorithm. The entire code was written by the authors. The results show that Ha predominantly governs hydrodynamics, inducing velocity suppression, flow flattening, and enhanced wall shear stress. Rectangular channels experience stronger Hartmann layer effects, while circular pipes exhibit smoother velocity profiles. Conversely, Br primarily controls thermal behavior, with higher values intensifying internal heat generation and elevating centerline temperature, potentially attenuating the average Nusselt number at high Br levels. Nonlinear Ha–Br interactions define distinct operational regimes, from heat transfer enhancement to thermal degradation. Optimal performance windows are identified: Ha ≈ 8–12 and Br ≈ 0.05–0.3 for channels, and Ha ≈ 10–15 and Br ≈ 0.1–0.4 for pipes, balancing thermal and hydraulic efficiency. Deviations from benchmark studies remain within ±5%, confirming predictive reliability. This work provides practical design guidance for advanced MHD thermal systems and establishes a foundation for future studies on temperature-dependent properties, three-dimensional effects, and complex flow regimes.
- 18 January 2026
- Published by Springer Nature
- p. 217-222
Venture Investments as a Driver of Innovative Development of the Space Industry
- 18 January 2026
- Published by Springer Nature
- p. 217-222
Venture Investments as a Driver of Innovative Development of the Space Industry
- 18 January 2026
- Published by Springer Nature
- p. 381-389
Modern Digital Technologies as an Element of Sustainable Development Strategy of Aerospace Industry Enterprises
- 18 January 2026
- Published by Springer Nature
- p. 381-389
Modern Digital Technologies as an Element of Sustainable Development Strategy of Aerospace Industry Enterprises
- Open Access
- 23 July 2024
- Published by National Research University, Higher School of Economics (HSE) in Journal of Corporate Finance Research / Корпоративные Финансы
- Vol. 18 (2) , 56-69
The Impact of Disclosing Digitalization Information on Corporate Financial Performance
The purpose of the present study is to assess the relationship between digitalization disclosure indicators and market capitalization in the Russian market, including during the COVID-19 pandemic. The research methodology includes text analysis to evaluate various components of digital transformation (business model transformation, process transformation, domain transformation, organization transformation) and digitalization. The model was assessed using panel regression and machine learning methods. The empirical basis of the study included financial indicators of 70 Russian companies and annual reports for 2017–2021. The main results are: 1) wider disclosure of information about digitalization in the annual reports of Russian companies increased company market capitalization; 2) the transformation of processes and organizationswas highly significant for Russian companies; 3) the COVID-19 pandemic accelerated digitalization and led to a partial catch-up in the level of digitalization among less advanced companies. The results of this study can be used by investors and company management to develop more competent and comprehensive digital policies.
- 23 July 2024
- Published by National Research University, Higher School of Economics (HSE) in Journal of Corporate Finance Research / Корпоративные Финансы
- Vol. 18 (2) , 56-69
Open AccessThe Impact of Disclosing Digitalization Information on Corporate Financial Performance
The purpose of the present study is to assess the relationship between digitalization disclosure indicators and market capitalization in the Russian market, including during the COVID-19 pandemic. The research methodology includes text analysis to evaluate various components of digital transformation (business model transformation, process transformation, domain transformation, organization transformation) and digitalization. The model was assessed using panel regression and machine learning methods. The empirical basis of the study included financial indicators of 70 Russian companies and annual reports for 2017–2021. The main results are: 1) wider disclosure of information about digitalization in the annual reports of Russian companies increased company market capitalization; 2) the transformation of processes and organizationswas highly significant for Russian companies; 3) the COVID-19 pandemic accelerated digitalization and led to a partial catch-up in the level of digitalization among less advanced companies. The results of this study can be used by investors and company management to develop more competent and comprehensive digital policies.
- 27 February 2024
- Published by Springer Nature
- p. 117-121
Application of Text Analysis and Ensemble Algorithms in Forecasting Companies Bankruptcy
- 27 February 2024
- Published by Springer Nature
- p. 117-121
Application of Text Analysis and Ensemble Algorithms in Forecasting Companies Bankruptcy
- 27 February 2024
- Published by Springer Nature
- p. 173-177
Development of Blockchain Platforms for Tokenization of Real Assets
- 27 February 2024
- Published by Springer Nature
- p. 173-177
Development of Blockchain Platforms for Tokenization of Real Assets
- Open Access
- 26 February 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (5) , 1912
Development of a Mechanism for Assessing Mutual Structural Relations for Import Substitution of High-Tech Transfer in Life Cycle Management of Fundamentally New Products
The emergence of fundamentally new products is conditioned both by the development of techniques and technologies and by the emerging new needs and conditions of economic and social life of society. In this case, the process of achieving product dominance in the market has a progressive cyclical character in the form of a spiral pattern, the movement along which occurs with acceleration. At the current stage of economic development, most states have problems expanding sales of products and capturing new markets. These problems today are described in the works of various scientists; the research of the authors touches upon the issues of economic development. Today’s economic conditions, which are characterized by the application of sanctions pressure on a large scale, do not assess the opposite effect, when the countries that are subjected to this pressure, and the countries that organize this pressure, suffer economic damage. Some suffer damage in the form of reduced ability to produce knowledge-intensive products by providing them with imported materials and components, others who exert this pressure, by reducing the sales of their products, and in this case, it is relevant to build a mechanism for assessing mutual structural links for import substitution of high-tech transfer in the management of the life cycle of radical new products, which in our view is useful for those or other countries. The hypothesis is that the modeling of mutual structural relations of high-tech transfer in the management of the life cycle of radical new products will significantly improve the mechanisms of industrial policy management and national technological security and ensure sustainable economic development. The aim of the study is the task of developing a mechanism of mutual structural links and assessing the synergetic economic effect based on the approach of intersectoral links, interactions and interdependencies. In the course of the research, the following tasks are solved: the necessity to adequately replace high-tech imports within the framework of national technological security is substantiated, for this purpose it is necessary to create unique equipment for the system of RNP production; the assessment of the possibility of realization of such a task is carried out; the assessment of high-tech competencies of science and production, technical and resource readiness (configuration of the RNP system) is necessary, and a complex model for the assessment of structural and mutual linkages in the economy of innovation is developed. The modeling performed by the authors allowed us to assess the structure of domestic high-tech imports and the coefficients of mutual linkage of imports. The practical significance of the study lies in the fact that the conducted research makes it possible to significantly improve the efficiency of management of innovation processes of high-tech transfer to ensure the creation of a system of production of radically new products at the levels of organization, industry or national economy, which will ensure stable economic development. For this purpose, the structure and dynamics of high-tech imports of the Russian Federation have been analyzed and calculated, taking into account critical technologies and industries. The multiplier effects in high-tech industries of the Russian economy taking into account imports were analyzed on the basis of the latest actual detailed data of Rosstat. The estimation of the mutual relationship of imports and application of the developed toolkit for the example “Mechanical equipment, machine tools and other equipment for general or special purposes” is carried out.
- 26 February 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (5) , 1912
Open AccessDevelopment of a Mechanism for Assessing Mutual Structural Relations for Import Substitution of High-Tech Transfer in Life Cycle Management of Fundamentally New Products
The emergence of fundamentally new products is conditioned both by the development of techniques and technologies and by the emerging new needs and conditions of economic and social life of society. In this case, the process of achieving product dominance in the market has a progressive cyclical character in the form of a spiral pattern, the movement along which occurs with acceleration. At the current stage of economic development, most states have problems expanding sales of products and capturing new markets. These problems today are described in the works of various scientists; the research of the authors touches upon the issues of economic development. Today’s economic conditions, which are characterized by the application of sanctions pressure on a large scale, do not assess the opposite effect, when the countries that are subjected to this pressure, and the countries that organize this pressure, suffer economic damage. Some suffer damage in the form of reduced ability to produce knowledge-intensive products by providing them with imported materials and components, others who exert this pressure, by reducing the sales of their products, and in this case, it is relevant to build a mechanism for assessing mutual structural links for import substitution of high-tech transfer in the management of the life cycle of radical new products, which in our view is useful for those or other countries. The hypothesis is that the modeling of mutual structural relations of high-tech transfer in the management of the life cycle of radical new products will significantly improve the mechanisms of industrial policy management and national technological security and ensure sustainable economic development. The aim of the study is the task of developing a mechanism of mutual structural links and assessing the synergetic economic effect based on the approach of intersectoral links, interactions and interdependencies. In the course of the research, the following tasks are solved: the necessity to adequately replace high-tech imports within the framework of national technological security is substantiated, for this purpose it is necessary to create unique equipment for the system of RNP production; the assessment of the possibility of realization of such a task is carried out; the assessment of high-tech competencies of science and production, technical and resource readiness (configuration of the RNP system) is necessary, and a complex model for the assessment of structural and mutual linkages in the economy of innovation is developed. The modeling performed by the authors allowed us to assess the structure of domestic high-tech imports and the coefficients of mutual linkage of imports. The practical significance of the study lies in the fact that the conducted research makes it possible to significantly improve the efficiency of management of innovation processes of high-tech transfer to ensure the creation of a system of production of radically new products at the levels of organization, industry or national economy, which will ensure stable economic development. For this purpose, the structure and dynamics of high-tech imports of the Russian Federation have been analyzed and calculated, taking into account critical technologies and industries. The multiplier effects in high-tech industries of the Russian economy taking into account imports were analyzed on the basis of the latest actual detailed data of Rosstat. The estimation of the mutual relationship of imports and application of the developed toolkit for the example “Mechanical equipment, machine tools and other equipment for general or special purposes” is carried out.