Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Dmitri L. Danilov has a total of 168 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Impact of Busbar Resistance and Series–Parallel Topology on Current Inhomogeneity and Safety Limits in Battery Packs

    by Xiaoxuan Chen, Dmitri L. Danilov, Tim-Andy Benning, Luc H. J. Raijmakers, Rüdiger-A. Eichel

    Current distribution in serial–parallel battery packs is commonly assumed to be uniform in the absence of cell-to-cell variations. However, in practical systems, the electrical topology and finite resistance of current-collecting busbars can introduce significant inhomogeneities even when all cells are identical. In this work, a matrix-based modeling framework is developed to analyze the current and voltage distribution in large battery packs with arbitrary serial–parallel configurations. The results reveal that the resistance of current-supplying busbars plays a dominant role in shaping current distribution, leading to pronounced current imbalance that increases with both resistance and operating C-rate. To quantify this effect, a current non-uniformity factor is introduced and used to define an illustrative criterion for acceptable operation. Based on this metric, together with a maximum-cell-voltage constraint, design maps are constructed to identify operating regions that are acceptable or critical with respect to current overload and localized overvoltage as a function of busbar resistance and charging rate. The analysis further demonstrates that topology-induced current inhomogeneity can lead to cell-level voltage divergence and localized overcharge under high-current operation. Such local effects may remain hidden when only the pack voltage or the voltage of a series-connected cell group is monitored, because conventional battery management systems (BMSs) typically do not resolve individual cell currents or local voltage drops within parallel-connected cell groups. The proposed approach enables the derivation of design-oriented constraints linking electrical performance to physical parameters such as busbar resistance and cell spacing. The resulting design maps provide a practical tool for battery pack engineering, enabling the determination of the maximum allowable busbar resistance or operating current to ensure safe, homogeneous pack operation.

  • Open Access

    Influence of sintering temperature on the performance of garnet-based all-solid-state Li-metal batteries

    by Zhizhen Qin, Jehad Ahmed, Dmitri L. Danilov, Baolin Wu, Anna Windmüller, Shicheng Yu, Chih-Long Tsai, Josef Granwehr, Chih-Chieh Wang, Rüdiger-A. Eichel, et al.


  • Promising hydrogen absorption at room temperature in a magnesium-based high-entropy alloy

    by Srilakshmi Jeyaraman, Dmitri L. Danilov, Peter H.L. Notten, Meera Balachandran, Thirugnasambandam G. Manivasagam


  • Open Access

    Impact of Oxygen Vacancies in LiCoO 2 on the Electrochemical Performance of Garnet‐Based All‐Solid‐State Li‐Metal Batteries

    by Zhizhen Qin, Jehad Ahmed, Sebastian Speer, Dmitri L. Danilov, Anna Windmüller, Shicheng Yu, Chih‐Long Tsai, Hermann Tempel, Josef Granwehr, Wen‐Wei Wu, et al.

    Garnet‐structured Li 7 La 3 Zr 2 O 7 (LLZO) is considered as one of the most promising solid electrolytes for high safety all‐solid‐state Li batteries (SSLBs) applications. However, this type of SSLB utilizing LiCoO 2 /LLZO as composite cathode faces high capacity degradation because of delamination between LiCoO 2 (LCO) and LLZO and possible oxygen vacancy‐driven microcrack formation within LCO. Herein, a pure oxygen atmosphere is used for sintering the composite cathode to limit oxygen vacancy formation in LCO. Different sintering temperatures are also used to reduce the effect of sintering atmospheres, which suggests the non‐reversible oxidation peak at ∼3.8 V is not related to Li 2 CO 3 formation. Although the Coulombic efficiencies of the first electrochemical cycle of SSLBs sintered in pure oxygen atmosphere are improved, their electrochemical performances are lower than that of air‐sintered SSLB due to higher cell resistances from the reduction of oxygen vacancies in LCO and possible higher volume change during electrochemical cycling. Also, the lower electrochemical cycling performance and observing tens of micrometers long inter‐granular cracks in the highly dense composite cathode suggests that microstructural optimization is more important than a high relative density. These observations provide guidelines for further improving the electrochemical cycling performance of garnet‐structure‐based SSLBs toward practical applications.


  • Open Access

    Influence of Ni and Nb Addition in TiVCr-Based High Entropy Alloys for Room-Temperature Hydrogen Storage

    by Srilakshmi Jeyaraman, Dmitri L. Danilov, Peter H. L. Notten, Udaya Bhaskar Reddy Ragula, Vaira Vignesh Ramalingam, Thirugnasambandam G. Manivasagam

    TiVCr-based alloys are well-explored body-centered cubic (BCC) materials for hydrogen storage applications that can potentially store higher amounts of hydrogen at moderate temperatures. The challenge remains in optimizing the alloy-hydrogen stability, and several transition elements have been found to support the reduction in the hydride stability. In this study, Ni and Nb transition elements were incorporated into the TiVCr alloy system to thoroughly understand their influence on the (de)hydrogenation kinetics and thermodynamic properties. Three different compositions, (TiVCr)95Ni5, (TiVCr)90 Ni10, and (TiVCr)95Ni5Nb5, were prepared via arc melting. The as-prepared samples showed the formation of a dual-phase BCC solid solution and secondary phase precipitates. The samples were characterized using hydrogen sorption studies. Among the studied compositions, (TiVCr)90Ni10 exhibited the highest hydrogen absorption capacity of 3 wt%, whereas both (TiVCr)95Ni5 and (TiVCr)90Ni5Nb5 absorbed up to 2.5 wt% hydrogen. The kinetics of (de)hydrogenation were modeled using the JMAK and 3D Jander diffusion models. The kinetics results showed that the presence of Ni improved hydrogen adsorption at the interface level, whereas Nb substitution enhanced diffusion and hydrogen release at room temperature. Thus, the addition of Ni and Nb to Ti-V-Cr-based high-entropy alloys significantly improved the hydrogen absorption and desorption properties at room temperature for gas-phase hydrogen storage.


  • Top Cited Papers
    Open Access

    Review of the Safe Operating Area (SOA) for Batteries: Evolving concepts and structured frameworks

    by Keivan Haghverdi, Dmitri L. Danilov, Grietus Mulder, Luis D. Couto, Feng Guo, Rüdiger-A. Eichel


  • Open Access

    Joint dynamics and efficient initialization techniques for potentials and currents in the P2D battery model

    by Keivan Haghverdi, Dmitri L. Danilov, Grietus Mulder, Luis D. Couto, Rüdiger-A. Eichel

    Solving the physics-based pseudo-two-dimensional (P2D) models involves using iterative methods, such as the Newton or the shooting method to solve a boundary condition problem. To use these iterative methods effectively, it is imperative to transform the boundary condition problem into an initial condition problem. This, in turn, necessitates initializing certain parameters, often done by providing guess values. The choice of these initial guess values can significantly impact convergence speed. This study proposes an analytically derived linear solution for initializing these conditions as an approximate guess. The proposed approach is not only computationally efficient, enhancing convergence speed and overall performance of the P2D model, but also straightforward to implement, making it a practical solution.


  • Open Access

    A Hybrid Electrochemical Multi-Particle Model for Li-ion Batteries

    by Haider Adel Ali Ali, Luc H. J. Raijmakers, Hermann Tempel, Dmitri L. Danilov, Peter H. L. Notten, Rüdiger-A. Eichel

    Physics-based models have proven to be effective tools for predicting the electrochemical behavior of Li-ion batteries. Among the various physics-based models, the Doyle-Fuller-Newman (DFN) model has emerged as the most widely employed. In response to certain limitations of the DFN model, the multiple particle-Doyle-Fuller-Newman (MP-DFN) model was introduced. The MP-DFN model utilizes multiple electrode particle sizes, addressing internal concentration heterogeneities and more realistically simulate diffusion processes in the electrodes. However, the model requires relatively high computational cost. This work introduces the Padé approximation for the MP-DFN model, resulting in the simplified MP-DFN model, leading to a faster simulation time. However, depending on battery design and operation conditions, this solution shows to have lower accuracy compared to the MP-DFN. To overcome these challenges, this study also introduces a hybrid MP-DFN model. This model uses a novel approach aimed at striking a balance between accuracy and computational speed. The hybrid MP-DFN model integrates both the finite difference method (FDM) and Padé approximation to effectively address the challenges posed by multiple particle sizes within the electrodes. The choice between FDM or the approximations for a specific particle in the electrode is determined by the scaled diffusion length.


  • The Voltage-Based Implementation of the Tunneling Mechanism in Aging Models for Lithium-Ion Batteries

    by Zhenya Wang, Dmitri L. Danilov, Rudiger-A Eichel, Peter H.L. Notten

    Lithium-ion batteries (LIBs) have become one of the most crucial power sources for electronics and electric vehicles due to high energy density, long cycle life, environmental friendliness, etc. Precise explanation and prediction of the aging behavior of LIBs is quickly becoming a hotspot. A solid electrolyte interface (SEI) growth is regarded as the dominant factor of capacity losses in LIBs. However, the previous SEI growth and aging models were based on energy levels. That means the energy barrier related to the Fermi level of SEI and electrode was used as the input parameter. It is not straightforward to implement, especially for industrial applications. Furthermore, the state-of-charge (SoC) and the energy barrier were usually assumed to be constant during (dis)charging, contradicting common sense and affecting the calculations' accuracy. The present work proposes and experimentally validates an advanced voltage-based aging model. The voltage of the anode electrode is adopted as an input parameter in this model. It is easier to introduce dependence of aging on the voltage/SoC of the electrode with this model. It is found that deep delithiation of the anodes and lower SoC of LIBs will mitigate electron tunneling, lower SEI growth, and reduce calendar aging. Commonly used anode materials, such as graphite, Li4Ti5O12, and blended Si/C, are presented as interesting cases to investigate the effects of different electrode materials on the tunneling current profiles during (dis)charging for the first time. The model is instructive and can predict aging in LIBs with various electrode materials. This model and related analyses are beneficial for further optimizing LIB's electronic and electrode properties and as interesting limiting cases for testing battery modeling software.