JCJianfeng Chen

Jianfeng Chen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Jianfeng Chen has a total of 34 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Flexible rectifying metasurfaces for efficient wireless energy harvesting

    by Xue Bai, Tiancheng Jiang, Jianfeng Chen, Feifan Lu, Zijie Dai, Leijun Xu

    A highly efficient, ultra-thin, and flexible rectifying metasurface (RMS) operating at 5.8 GHz is presented. The unit cell utilizes a composite symmetric structure. This structure consists of a double-cross and a notched rectangular ring. This geometric symmetry ensures polarization insensitivity. Structural parameters were optimized to achieve simultaneous impedance matching. The metasurface matches the impedance of free space ( Z 0 ) and provides a conjugate match to the diodes. This eliminates the need for external matching networks, thereby significantly enhancing system integration. Furthermore, the high-Q chip inductors within the interconnect units serve both as direct current (DC) pathways and, in conjunction with the unit’s inherent parasitic capacitance, form radio frequency (RF) filters. This coplanar integration obviates the need for a separate power combining network. A 6×6 array (96 mm × 96 mm) was fabricated on a 0.6 mm thick polyimide substrate. Experimental measurements demonstrate a total efficiency exceeding 67% across all polarization angles. The efficiency remains above 64.2% within an incident angle range of 0° to 30°. Additionally, the system maintains an efficiency of 66.74% when bent to a curvature radius of 180 mm. These results demonstrate excellent conformability. These attributes make the proposed RMS a highly efficient and compact solution for wireless power delivery, particularly for Internet of Things (IoT) and wearable applications.


  • Evanescent-Mode Waveguide Resonator for High-Sensitive Nondestructive Testing Application

    by Jianfeng Chen, Shengqi Zhang, Leijun Xu, Qiang Cheng

    This article presents a novel semi-open resonator design based on a pair of evanescent waveguides (EWs) and a dielectric material under test (MUT) for high-sensitivity material structural health monitoring. Compared to conventional microwave resonant cavities, the electric field energy is primarily concentrated within the dielectric material at the resonant frequency, which significantly enhances the interaction between the electromagnetic field and the dielectric. Minor variations in dielectric properties caused by local defects will induce measurable shifts in the resonant frequency. Another distinctive feature of the designed resonant cavity is its semi-open architecture, where the dielectric material is not placed inside a rectangular waveguide but is positioned between two mirror-symmetric open-ended waveguides. This design enables the resonator to achieve scanning detection for larger-area MUTs. To mitigate electromagnetic leakage and enhance the quality factor of the resonator, a parallel plate waveguide (PPW) is incorporated at the open ends of the evanescent waveguides. To demonstrate the detecting ability, an extensive investigation of the sensitivity to local defects inside the material is presented. Two different dielectric materials, including F4B and ceramic samples, are tested using a prototype device. The experimental results demonstrated frequency shifts of 11 MHz at 4.32 GHz and 10 MHz at 3.65 GHz for subwavelength defects with diameters and thicknesses less than 2 mm. Compared to conventional microwave-based sensors, our proposed method offers advantages in detecting minute defects within relatively thick materials at lower operating frequencies.

  • Open Access

    Design of N-Way Power Divider Based on TE10 Mode Splitting Strategy

    by Jianfeng Chen, Haidi Tang, Shengqi Zhang, Leijun Xu

    This paper presents a novel 1-to-N power division architecture combining overmoded TE10 mode waveguides and modular N-way waveguide-to-microstrip mode converters. By decomposing the TE10 mode field distribution along the narrow wall of a rectangular waveguide, the proposed design enables flexible power splitting into arbitrary output ports (even or odd numbers) through uniform sub-TE10-mode waveguide pathways. To achieve the above function using microwave transmission lines, a tapered transition structure ensures wideband excitation of the overmoded waveguide, while linearly tapered slot antennas (LTSAs) serve as N-way mode converters. Prototypes with two-, three-, and four-channel outputs demonstrate excellent amplitude-phase uniformity (≤0.5 dB amplitude imbalance and ≤5∘ phase deviation) across 6.5–12 GHz, with return loss <−10 dB. The modular 1-to-N power divider enables the rapid reconfiguration of output channels by simply replacing the mode converter module.

  • Microwave Sensor Array Based on Differential Mode Detection Strategy

    by Leijun Xu, Fanfan Li, Shengqi Zhang, Xue Bai, Qiang Wang, Jianfeng Chen

    A novel microwave sensor array utilizing a differential-mode detection strategy is introduced for localized material defect detection. Two types of modified split-ring resonators (SRRs) with unloaded Q -factor above 437 and 290, respectively, are utilized to construct the basic differential sensing elements. By arranging these elements with different sizes, a sensor array can be realized. Since the distinct resonant frequency of each element, multiple transmission zeros are included in the working range. Each resonance zero corresponds to an independent region of the material under test (MUT). Any local defect will cause a split in the corresponding resonant frequency. Therefore, detection results can be obtained simply by observing the split points in the resonance spectrum, eliminating the need for further calibration. This letter presents the coupling mechanisms of the proposed two basic sensing units and the operating principle of the proposed sensor array. A prototype operating from 2.4 to 4.6 GHz with five independent differential units has been designed and fabricated. Three different samples with local defects were used for validation.


  • Open Access

    One-to-Multiple RF Power Transmission System Based on High-Gain Phased Array with Beam Control

    by Xue Bai, Yanjiao Hou, Leijun Xu, Jianfeng Chen, Yiyang Kong

    This paper proposes a one-to-multiple RF wireless power transmission (WPT) system that uses multi-mode phased array technology to control beamforming. The proposed system uses array partition mode and time division mode to achieve multi-target WPT. A novel quasi-Yagi antenna with enhanced gain is designed, consisting of a pair of dipoles, three directors, and a single split-ring resonator (SSRR), which is then used to form a 1×8 array for power transmission. The antenna has a bandwidth of 0.35 GHz with a frequency range of 2.25-2.6 GHz and a gain of 9.38 dBi. The total gain of the 1×8 array antenna is 17.23 dBi. An 8-way power divider is designed and implemented to feed the power amplifier (PA) of each array element, with isolation greater than 20 dB and return loss less than −17 dB. A digital phase and attenuation control circuit is also designed to achieve beam control. Measurement results show that at a distance of 3 meters, the maximum received power for single-target and multi-target schemes is 7.5 dBm and −2.6 dBm at each node, respectively. The system’s flexible beam control mode and high gain transmission characteristics can be used in scenarios such as wirelessly powering Internet of Things (IoT) multi-sensor networks.


  • Open Access

    High-Efficiency 5G-Band Rectifier with Impedance Dispersion Compensation Network

    by Yiyang Kong, Xue Bai, Leijun Xu, Jianfeng Chen

    This paper proposes a microwave rectifier designed for the popular 5G band, featuring impedance dispersion compensation and a cross-type impedance matching network. The rectifier has an ultra-high power conversion efficiency. The compensation network employs two parallel transmission lines to counteract the nonlinear shift of the diode input impedance caused by frequency variation. Additionally, the cross-over impedance matching network enhances matching and minimizes losses. After rigorous theoretical analysis and simulation, the rectifier is fabricated. Experimental results show significant conversion efficiency in the 5G band (across 4–6.5 GHz). At an input power of 12 dBm, the rectifier achieves more than 60% efficiency between 4.8 and 6.4 GHz and more than 70% between 5.2 and 6.2 GHz, with a peak efficiency of 78.1%. Moreover, the rectifier maintains more than 50% efficiency over a wide input power range of 5 to 14 dBm.


  • Linearity and Continuity Enhanced Phase Shifter Based on Geometric-Phase Metasurface

    by Jianfeng Chen, Shengqi Zhang, Qiang Wang, Lei Wang, George Goussetis, Qiang Cheng

    In this article, a geometric-phase (GP) metasurface-inspired phase shifter with linear and continual phase response has been introduced. The output phase can be adjusted by only rotating the GP metasurface. Physically distinct from the traditional phase-shifting techniques relying on the dynamical phase (DP), the phase variation based on the manipulation of the GP is independent of the signal transmission time, leading to desirably stable performances in the working band. To elaborate on the idea, a phased shifter model has been implemented in a circular waveguide by loading a GP metasurface and two polarization converters. Theoretical analysis, including the generation of GP and transmission-line networks, is carried out in detail. In addition, the limitation of this approach is also explored, in order to deliver a general design guideline for practical applications. To further demonstrate our scenario, a proof-of-concept prototype is fabricated and tested. The numerical and experimental results are in good agreement and both validate the effectiveness on the phase linearity and stability in the design frequency band. In conclusion, the proposed frequency-independent phase shifter is very promising for the emerging phased array systems with stable and reliable performance in a wideband.


  • A high-order TE50 mode waveguide with single mode transmission property and its application in slot array antenna

    by Jianfeng Chen, Xiaolong Fan, Qiang Cheng

    Conventional array antenna techniques contain various feeding networks, such as T-junction power dividers, phase dividers, and baluns. To feed a relatively large array, one can cascade the traditional T-junction power dividers, resulting in the increase of design complexity. In this paper, an overmoded waveguide supporting the single mode propagation of TE50 mode, is presented. Since TE50 mode can be separated into five TE10 modes with equi-amplitude and opposite phase properties, it is advisable to distribute the input signal flexibly and decrease the cascading of the T-junctions for the traditional feeding networks. To actualize a TE50 mode waveguide, several rows of metallic blocks acting as metamaterial are periodically loaded inside an overmoded waveguide to tailor the dispersion of the waveguide modes and yield the proposed mode bandgaps. Considering the Bloch theory, parts of the undesired waveguide modes are not supported inside the metamaterial and will be removed by these bandgaps. In addition, central feeding method is used to suppress the unwanted modes further in light of mode mismatch. As a proof-of-concept, we drilled the slot array on the top of the overmoded waveguide directly and give rise to a pencil beam radiation along the broadside with 15–17 dBi realized gain among 9.4–10.6 GHz, which demonstrates the stable feeding ability of TE50 mode.


  • Open Access

    Near-Field High-Resolution SAR Imaging with Sparse Sampling Interval

    by Chengyi Zhao, Leijun Xu, Xue Bai, Jianfeng Chen

    Near-field high-resolution synthetic aperture radar (SAR) imaging is mostly accompanied by a large number of data acquisition processes, which increases the system complexity and device cost. According to extensive reports, reducing the number of sampling points of a radar in space can greatly reduce the amount of data. However, when spatial sparse sampling is carried out, a ghost normally appears in the imaging results due to the high side lobes generated in the azimuth. To address this issue, a technique is introduced in this paper to recover the blank data through amplitude and phase compensation based on the correlation between sparse array sampling through adjacent points. Firstly, the data sampled by the sparse array is compressed in the range direction to obtain the expected data slices in the same range direction. Then, the blank element of the slice is compensated for with amplitude and phase to obtain full aperture data. Finally, the matched filter method is used to aid in the image reconstruction. The simulation results verified that the method proposed in this paper can effectively reconstruct the image under two kinds of sparse sampling conditions. Thus, a simple single-input single-output (SISO) synthetic aperture radar imaging test bench is established. Compared with the results of a 1 mm (1/4 λ) sampling interval, the quality of the reconstructed image under the condition of a 4 mm (1 λ) sampling interval still stands using our proposed method. Demonstrated by the experiment, the normalized root-mean-square error(NMSE) is 5.75%. Additionally, when the spatial sampling points are sampled randomly with 30% of the full sampling condition, this method can also restore and reconstruct the image with high quality. Due to the decrease of sampling points, the data volume can be reduced, which is beneficial for improving the scanning speed and alleviating the pressure of data transmission for near-field high resolution SAR imaging systems.