Yuan-Feng Zhu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Interests
Yuan-Feng Zhu has a total of 86 co-authors. Here are the top co-authors by number of shared publications:
Hua Wang
8 shared publications- Ming-Yang Chen
Jiangsu University
5 shared publications - Yunqi Liu
Shanghai University
5 shared publications - Xingfang Luo
Jiangxi Key Laboratory of Nanomaterials and Sensors, School of Physics, Communication and Electronics, Jiangxi Normal University, Nanchang, China
4 shared publications - Chunfang Rao
School of Physics and Communication Electronics and Jiangxi Provincial Key Laboratory of Advanced Electronic Materials and Devices, Jiangxi Normal University, Nanchang, Jiangxi, China
3 shared publications Dan-Dan Ji
School of Physics and Communication Electronics, Jiangxi Normal University and Key Laboratory of Optoelectronic and Telecommunication of Jiangxi Province, Nanchang, China
2 shared publications
Latest Publications
- 2 September 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 140 (9)
Reconfigurable terahertz spatial differentiation via incident angle tuned beam shifts on a Bi2Te3 platform
Optical spatial differentiation offers an ultrafast, low-power route to edge detection by directly processing the optical field and can address the inherent diffraction-limited blurring of terahertz (THz) imaging. However, existing THz edge detection schemes face persistent bottlenecks. Metasurfaces and diffractive devices are fixed in function once fabricated, whereas tunable approaches demand stringent angular alignment that limits practical deployment. Here, we theoretically demonstrate a reconfigurable THz spatial differentiator built on the topological insulator Bi2Te3. The device achieves single-parameter mode reconfigurability, enabling seamless switching among one-dimensional (1D) x-direction, 1D y-direction, and isotropic two-dimensional edge enhancement solely by varying the incident angle at a fixed Fermi energy. It also offers favorable parameter robustness, including a broad angular tolerance for 1D x-direction mode and insensitivity to external magnetic fields. Transfer function analysis and edge detection simulations validate the device performance, providing a robust platform for dynamic THz optical computing and high-contrast edge imaging.
- 2 September 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 140 (9)
Reconfigurable terahertz spatial differentiation via incident angle tuned beam shifts on a Bi2Te3 platform
Optical spatial differentiation offers an ultrafast, low-power route to edge detection by directly processing the optical field and can address the inherent diffraction-limited blurring of terahertz (THz) imaging. However, existing THz edge detection schemes face persistent bottlenecks. Metasurfaces and diffractive devices are fixed in function once fabricated, whereas tunable approaches demand stringent angular alignment that limits practical deployment. Here, we theoretically demonstrate a reconfigurable THz spatial differentiator built on the topological insulator Bi2Te3. The device achieves single-parameter mode reconfigurability, enabling seamless switching among one-dimensional (1D) x-direction, 1D y-direction, and isotropic two-dimensional edge enhancement solely by varying the incident angle at a fixed Fermi energy. It also offers favorable parameter robustness, including a broad angular tolerance for 1D x-direction mode and insensitivity to external magnetic fields. Transfer function analysis and edge detection simulations validate the device performance, providing a robust platform for dynamic THz optical computing and high-contrast edge imaging.
- Open Access
- 1 January 2026
- Published by Journal of Applied Optics in Journal of Applied Optics
- Vol. 47 (5) , 1158-1165
基于AZ5214光刻胶激光直写与热回流的高质量微透镜阵列制备
微透镜阵列在成像、显示和微光学等方面都有一定应用,但在制备过程中,要同时兼顾填充因子、尺寸均匀性和形貌一致性并不容易。以AZ5214正性光刻胶为材料,研究了在石英玻璃基底上制备球冠状微透镜阵列的方法。工艺上采用紫外激光直写与热回流相结合的方式,并对旋涂、前烘、曝光、显影和热回流等关键环节进行了优化。结果表明,所得微透镜阵列周期约为16.5 μm,平均直径约为15.1 μm,平均高度约为2.82 μm,曲率半径约为11.6 μm。所制备结构表面较光滑、形貌较规整,体积平均收缩率约为8.98%,直径和高度的最大相对偏差分别约为1.7%和1.5%。上述结果表明,在本文工艺参数下,紫外激光直写与热回流相结合可实现球冠状微透镜阵列的制备。
- 1 January 2026
- Published by Journal of Applied Optics in Journal of Applied Optics
- Vol. 47 (5) , 1158-1165
Open Access基于AZ5214光刻胶激光直写与热回流的高质量微透镜阵列制备
微透镜阵列在成像、显示和微光学等方面都有一定应用,但在制备过程中,要同时兼顾填充因子、尺寸均匀性和形貌一致性并不容易。以AZ5214正性光刻胶为材料,研究了在石英玻璃基底上制备球冠状微透镜阵列的方法。工艺上采用紫外激光直写与热回流相结合的方式,并对旋涂、前烘、曝光、显影和热回流等关键环节进行了优化。结果表明,所得微透镜阵列周期约为16.5 μm,平均直径约为15.1 μm,平均高度约为2.82 μm,曲率半径约为11.6 μm。所制备结构表面较光滑、形貌较规整,体积平均收缩率约为8.98%,直径和高度的最大相对偏差分别约为1.7%和1.5%。上述结果表明,在本文工艺参数下,紫外激光直写与热回流相结合可实现球冠状微透镜阵列的制备。
- 14 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (11) , 19250-19257
Torsion-Insensitive Curvature Sensing via Azimuthal-Order-Controlled Cladding Mode Coupling in Long-Period Fiber Gratings
We proposed a novel long-period fiber grating (LPFG) capable of simultaneously coupling cladding modes with different azimuthal orders. A theoretical model of an LPFG with asymmetric refractive index modulation (RIM) was developed in a single-mode fiber to investigate the effects of cross-sectional distribution and modulation depth on the coupling efficiency of cladding modes. Unlike conventional fabrication methods, a novel CO2 laser-based point-shaped exposure technique was introduced to induce asymmetric RIM, enabling the simultaneous coupling of the LP15 and LP06 mode within a single grating. The proposed LPFG leverages the resonance wavelength difference between the two cladding modes for sensing applications. Experimental results demonstrated effective suppression of torsion sensitivity, achieving a minimal value of 1.2 pm/(rad/m) over a twist rate range of –34.5 rad/m to 34.5 rad/m. Additionally, the LPFG reduced sensitivity to temperature and refractive index while exhibiting a high curvature sensitivity of 13.34 nm/m-1 over a curvature range of 0 to 3.88 m-1. The combination of reduced cross-sensitivities, high curvature sensitivity, and compact structure highlights the potential of the proposed LPFG for practical sensing applications in complex environments.
- 14 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (11) , 19250-19257
Torsion-Insensitive Curvature Sensing via Azimuthal-Order-Controlled Cladding Mode Coupling in Long-Period Fiber Gratings
We proposed a novel long-period fiber grating (LPFG) capable of simultaneously coupling cladding modes with different azimuthal orders. A theoretical model of an LPFG with asymmetric refractive index modulation (RIM) was developed in a single-mode fiber to investigate the effects of cross-sectional distribution and modulation depth on the coupling efficiency of cladding modes. Unlike conventional fabrication methods, a novel CO2 laser-based point-shaped exposure technique was introduced to induce asymmetric RIM, enabling the simultaneous coupling of the LP15 and LP06 mode within a single grating. The proposed LPFG leverages the resonance wavelength difference between the two cladding modes for sensing applications. Experimental results demonstrated effective suppression of torsion sensitivity, achieving a minimal value of 1.2 pm/(rad/m) over a twist rate range of –34.5 rad/m to 34.5 rad/m. Additionally, the LPFG reduced sensitivity to temperature and refractive index while exhibiting a high curvature sensitivity of 13.34 nm/m-1 over a curvature range of 0 to 3.88 m-1. The combination of reduced cross-sensitivities, high curvature sensitivity, and compact structure highlights the potential of the proposed LPFG for practical sensing applications in complex environments.
- 25 February 2025
- Published by Elsevier in Optics Communications
- Vol. 582
Single-mode polarization beam splitter based on dual-hollow-core anti-resonant fiber
- 25 February 2025
- Published by Elsevier in Optics Communications
- Vol. 582
Single-mode polarization beam splitter based on dual-hollow-core anti-resonant fiber
- 13 January 2025
- Published by Springer Nature in Optical Review
- Vol. 32 (1) , 102-110
A terahertz polarization filter based on non-uniform thickness dielectric twin-tube
- 13 January 2025
- Published by Springer Nature in Optical Review
- Vol. 32 (1) , 102-110
A terahertz polarization filter based on non-uniform thickness dielectric twin-tube
- 19 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (7) , 3420-3428
Dual Bound-States in the Continuum Enabled by Guided-Mode Resonance in Metallic Metasurface
Electromagnetic metasurfaces exhibit remarkable scattering effects that enable precise modulation of electromagnetic waves. Bound-states in the continuums (BICs) are able to confine the electromagnetic energy to a localized region without high radiative losses and therefore exhibit ultra-high quality (Q) factor resonances. This study presents a novel approach to achieving dual BICs within metallic metasurfaces, enabling the confinement of electromagnetic energy with minimal radiative losses and ultra-high factor resonances. We demonstrate that dual quasi-BIC (QBIC) with stable resonance frequencies can be realized by breaking translational symmetry while preserving C2 symmetry. Importantly, BICs derived from both Fano resonance and electromagnetically induced transparency (EIT) can coexist at distinct frequencies. The design features a dimer structure in the metal metasurface, where the resonance point shows minimal dependence on the shape of the metal sheet. The resonance frequency of the QBIC can be effectively tuned by adjusting the periodicity, while the Q factor is modifiable through changes in the relative positioning of the metal sheets. Our findings indicate significant potential for high-Q factors and exceptional slow-light effects, paving the way for the development of high-performance filters, sensors, and modulators in terahertz applications.
- 19 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (7) , 3420-3428
Dual Bound-States in the Continuum Enabled by Guided-Mode Resonance in Metallic Metasurface
Electromagnetic metasurfaces exhibit remarkable scattering effects that enable precise modulation of electromagnetic waves. Bound-states in the continuums (BICs) are able to confine the electromagnetic energy to a localized region without high radiative losses and therefore exhibit ultra-high quality (Q) factor resonances. This study presents a novel approach to achieving dual BICs within metallic metasurfaces, enabling the confinement of electromagnetic energy with minimal radiative losses and ultra-high factor resonances. We demonstrate that dual quasi-BIC (QBIC) with stable resonance frequencies can be realized by breaking translational symmetry while preserving C2 symmetry. Importantly, BICs derived from both Fano resonance and electromagnetically induced transparency (EIT) can coexist at distinct frequencies. The design features a dimer structure in the metal metasurface, where the resonance point shows minimal dependence on the shape of the metal sheet. The resonance frequency of the QBIC can be effectively tuned by adjusting the periodicity, while the Q factor is modifiable through changes in the relative positioning of the metal sheets. Our findings indicate significant potential for high-Q factors and exceptional slow-light effects, paving the way for the development of high-performance filters, sensors, and modulators in terahertz applications.
- 16 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (21) , 34522-34532
Indirect Detection of Embedded Tiny Torque Screw Preloading Using Suspended Fiber Bragg Grating Sensor and MFCC-Based Probabilistic Neural Network
The assessment of fastener tightness is essential for ensuring the safety and dependability of fastener assemblies. Monitoring the preloading of an embedded screw in a confined space poses challenges, as most existing sensors are unsuitable for this purpose. This study introduces a new sensor system based on a suspended-Fiber Bragg Grating (FBG). A slender tail of an optical FBG sensor was affixed to the monitored structure, which was subjected to periodic impulse excitation. This excitation generated a multi-harmonic vibration response containing information about the tightness, resulting in a multi-frequency acoustic-elastic wave traveling along the suspended-optical fiber and being captured by the FBG sensor. Following signal extraction, a combined approach utilizing adaptive Mel Frequency Cepstral Coefficient (MFCC) feature extraction and a Probabilistic Neural Networks (PNN) classifier was proposed to detect screw loosening. By optimizing the parameters, an average accuracy of exceeding 99.7% was achieved. This study presents a valuable technique for monitoring loosening, particularly in fastener structures with embedded tiny torque screws in confined spaces.
- 16 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (21) , 34522-34532
Indirect Detection of Embedded Tiny Torque Screw Preloading Using Suspended Fiber Bragg Grating Sensor and MFCC-Based Probabilistic Neural Network
The assessment of fastener tightness is essential for ensuring the safety and dependability of fastener assemblies. Monitoring the preloading of an embedded screw in a confined space poses challenges, as most existing sensors are unsuitable for this purpose. This study introduces a new sensor system based on a suspended-Fiber Bragg Grating (FBG). A slender tail of an optical FBG sensor was affixed to the monitored structure, which was subjected to periodic impulse excitation. This excitation generated a multi-harmonic vibration response containing information about the tightness, resulting in a multi-frequency acoustic-elastic wave traveling along the suspended-optical fiber and being captured by the FBG sensor. Following signal extraction, a combined approach utilizing adaptive Mel Frequency Cepstral Coefficient (MFCC) feature extraction and a Probabilistic Neural Networks (PNN) classifier was proposed to detect screw loosening. By optimizing the parameters, an average accuracy of exceeding 99.7% was achieved. This study presents a valuable technique for monitoring loosening, particularly in fastener structures with embedded tiny torque screws in confined spaces.
- 1 August 2024
- Published by SPIE-Intl Soc Optical Eng in Optical Engineering
- Vol. 63 (08) , 086101-11
Research on ultra-high birefringence terahertz fibers with simple structures
Fibers with high birefringence and low loss offer notable benefits in the areas of sensing, communication, and polarization filtering. An asymmetry subwavelength suspended-core terahertz (THz) fiber composed of rectangular and arc-shaped dielectric layers is studied. Simulation results show that the fiber has both ultra-high birefringence and low loss characteristics. The birefringence value is higher than 0.038 from 0.8 to 1.0 THz, and the transmission losses of two polarization modes are lower than 0.5247 dB/cm when the thicknesses of all dielectric layers are the same. We note that the birefringence value can be further increased by adjusting the thickness of the rectangular dielectric layer. The birefringence value reaches the order of 10−1 in the frequency range of 0.82 to 1.98 THz. At 0.82 THz, the losses for x- and y-polarization modes are 0.3705 and 0.0754 dB/cm, respectively. Therefore, this type of fiber will be of great significance in eliminating the adverse influences of polarization effects in THz systems.
- 1 August 2024
- Published by SPIE-Intl Soc Optical Eng in Optical Engineering
- Vol. 63 (08) , 086101-11
Research on ultra-high birefringence terahertz fibers with simple structures
Fibers with high birefringence and low loss offer notable benefits in the areas of sensing, communication, and polarization filtering. An asymmetry subwavelength suspended-core terahertz (THz) fiber composed of rectangular and arc-shaped dielectric layers is studied. Simulation results show that the fiber has both ultra-high birefringence and low loss characteristics. The birefringence value is higher than 0.038 from 0.8 to 1.0 THz, and the transmission losses of two polarization modes are lower than 0.5247 dB/cm when the thicknesses of all dielectric layers are the same. We note that the birefringence value can be further increased by adjusting the thickness of the rectangular dielectric layer. The birefringence value reaches the order of 10−1 in the frequency range of 0.82 to 1.98 THz. At 0.82 THz, the losses for x- and y-polarization modes are 0.3705 and 0.0754 dB/cm, respectively. Therefore, this type of fiber will be of great significance in eliminating the adverse influences of polarization effects in THz systems.
- 25 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 14 (4) , 510-518
Design, Simulation, and Characterization of a Partial Negative Curvature Antiresonant Hollow-Core Fiber for Low Loss Terahertz Wave Transmission
The present paper demonstrates a novel partial negative curvature hollow-core fiber for low-loss terahertz transmission. In the optimized fiber structure, the tubes in the vertical direction are replaced by plate-like dielectric sheets, thereby achieving low loss and low blocked risk of 3D printing, while retaining a small fiber hollow core and fiber diameter. The 3D printed fiber is characterized by a terahertz time-domain spectroscopy (THz-TDS) system. The obtained transmission spectrum demonstrates the mode beating phenomenon and its peak position varies periodically with fiber length at short distances. The thin antiresonant walls endow the fiber with two broad low-loss windows of 0.2–0.4 THz and 0.55–0.85 THz. Besides, the x-polarization and y-polarization waves achieve minimum losses of 16.2 dB/m@0.28 THz and 16.0 dB/m@0.29 THz, respectively. Furthermore, our fiber has low experimental dispersions, namely −0.18±1.1 ps/THz/cm (x-pol) and 0.67±0.77 ps/THz/cm (y-pol). The experimental losses and dispersions match well with the simulation results. Additionally, the simulation results reveal that the fiber has the potential to attain a high birefringence of 10 −3 .
- 25 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 14 (4) , 510-518
Design, Simulation, and Characterization of a Partial Negative Curvature Antiresonant Hollow-Core Fiber for Low Loss Terahertz Wave Transmission
The present paper demonstrates a novel partial negative curvature hollow-core fiber for low-loss terahertz transmission. In the optimized fiber structure, the tubes in the vertical direction are replaced by plate-like dielectric sheets, thereby achieving low loss and low blocked risk of 3D printing, while retaining a small fiber hollow core and fiber diameter. The 3D printed fiber is characterized by a terahertz time-domain spectroscopy (THz-TDS) system. The obtained transmission spectrum demonstrates the mode beating phenomenon and its peak position varies periodically with fiber length at short distances. The thin antiresonant walls endow the fiber with two broad low-loss windows of 0.2–0.4 THz and 0.55–0.85 THz. Besides, the x-polarization and y-polarization waves achieve minimum losses of 16.2 dB/m@0.28 THz and 16.0 dB/m@0.29 THz, respectively. Furthermore, our fiber has low experimental dispersions, namely −0.18±1.1 ps/THz/cm (x-pol) and 0.67±0.77 ps/THz/cm (y-pol). The experimental losses and dispersions match well with the simulation results. Additionally, the simulation results reveal that the fiber has the potential to attain a high birefringence of 10 −3 .
- Open Access
- 10 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 15 (6) , 1-7
An Ultra-Low Bending Loss Negative Curvature Hollow Core Fiber With a Polygon Jacketing Layer
We design and simulate a new type of hollow-core antiresonant fiber with the polygon jacketing layer. Through numerical calculations, the confinement loss is approximately 0.003 dB/km at 1.45 μm and the bandwidth is ∼ 410 nm @ CL < 0.1 dB/km. We found that more nested tubes can be connected to the jacketing layer to avoid the generation of more cladding nodes. The nested tube cladding with the small size of air holes can effectively suppress the coupling between the fiber cladding and core modes even at extreme bending conditions. Ultra-low bending loss is achieved, and the bending loss is lower than ∼ 0.05 dB/km @ bend radius R b = 3 cm at 1.50 μm.
- 10 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 15 (6) , 1-7
Open AccessAn Ultra-Low Bending Loss Negative Curvature Hollow Core Fiber With a Polygon Jacketing Layer
We design and simulate a new type of hollow-core antiresonant fiber with the polygon jacketing layer. Through numerical calculations, the confinement loss is approximately 0.003 dB/km at 1.45 μm and the bandwidth is ∼ 410 nm @ CL < 0.1 dB/km. We found that more nested tubes can be connected to the jacketing layer to avoid the generation of more cladding nodes. The nested tube cladding with the small size of air holes can effectively suppress the coupling between the fiber cladding and core modes even at extreme bending conditions. Ultra-low bending loss is achieved, and the bending loss is lower than ∼ 0.05 dB/km @ bend radius R b = 3 cm at 1.50 μm.