Oswaldo Curty da Motta Lima
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Oswaldo Curty da Motta Lima has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Laureano Jiménez
Departament d’Enginyeria Química, Universitat Rovira i Virgili, Av. Països Catalans 26, 43007 Tarragona, Spain
3 shared publications - Lucas Bonfim-Rocha
Chemical Engineering Graduate Program, Universidade Estadual de Maringá, Maringa, Brazil, Brazil
3 shared publications - Edson Antonio da Silva
Departamento de Tecnologia, Centro de Tecnologia, Universidade Estadual de Maringá, Av. Ângelo Moreira da Fonseca 1800, Umuarama 87506-370, PR, Brazil
2 shared publications G. M. Malavazi
2 shared publications- Maria Angélica Simões Dornellas de Barros
Postgraduate Program in Chemical Engineering, Department of Chemical Engineering, State University of Maringá, Avenida Colombo, 5790, Maringá 87020-900, PR, Brazil
2 shared publications Rodrigo O. Silva
2 shared publications
Latest Publications
- Open Access
- 1 January 2021
- Published by Editora Conhecimento Livre
PROFESSORES DE ENGENHARIA QUÍMICA: DESAFIOS E DIFICULDADES AO SE INICIAR A CARREIRA DOCENTE
- 1 January 2021
- Published by Editora Conhecimento Livre
Open AccessPROFESSORES DE ENGENHARIA QUÍMICA: DESAFIOS E DIFICULDADES AO SE INICIAR A CARREIRA DOCENTE
- 1 May 2018
- Published by Elsevier in Journal of Cleaner Production
- Vol. 183, 956-963
Multi-objective optimization of an industrial ethanol distillation system for vinasse reduction – A case study
- 1 May 2018
- Published by Elsevier in Journal of Cleaner Production
- Vol. 183, 956-963
Multi-objective optimization of an industrial ethanol distillation system for vinasse reduction – A case study
- 1 January 2017
- Published by Elsevier
- Vol. 40, 811-816
Synthesis of a New Route for Methanol Production by Syngas Arising from Sugarcane Vinasse
- 1 January 2017
- Published by Elsevier
- Vol. 40, 811-816
Synthesis of a New Route for Methanol Production by Syngas Arising from Sugarcane Vinasse
- 1 January 2015
- Published by Elsevier
- p. 443-448
Integrated Analysis of an Evaporation and Distillation Bioethanol Industrial System Using Direct and Indirect Heating
- 1 January 2015
- Published by Elsevier
- p. 443-448
Integrated Analysis of an Evaporation and Distillation Bioethanol Industrial System Using Direct and Indirect Heating
- Open Access
- 1 December 2014
- Published by Editora Edgard Blucher, Ltda.
- Vol. 1 (1) , 241-244
MÉTODO McCABE-THIELE DETERMINAÇÃO DA RAZÃO DE REFLUXO NO PROJETO E OPERAÇÃO DE COLUNAS COM SAÍDA LATERAL NA SEÇÃO DE RETIFICAÇÃO
Colunas de destilação estão entre os equipamentos mais usados nas indústrias químicas e petroquímicas. No caso da destilação binária, o método McCabe-...
- 1 December 2014
- Published by Editora Edgard Blucher, Ltda.
- Vol. 1 (1) , 241-244
Open AccessMÉTODO McCABE-THIELE DETERMINAÇÃO DA RAZÃO DE REFLUXO NO PROJETO E OPERAÇÃO DE COLUNAS COM SAÍDA LATERAL NA SEÇÃO DE RETIFICAÇÃO
Colunas de destilação estão entre os equipamentos mais usados nas indústrias químicas e petroquímicas. No caso da destilação binária, o método McCabe-...
- Open Access
- 1 December 2014
- Published by Editora Edgard Blucher, Ltda.
- Vol. 1 (1) , 235-240
MÉTODO McCABE-THIELE - ANÁLISE COMPARATIVA DA DETERMINAÇÃO DA FRAÇÃO LÍQUIDA DA ALIMENTAÇÃO (OU CONDIÇÃO TÉRMICA DA ALIMENTAÇÃO)
O método McCabe-Thiele para dimensionamento de colunas de destilação é amplamente conhecido. Dentro desse método, há uma variável relacionada com a condi...
- 1 December 2014
- Published by Editora Edgard Blucher, Ltda.
- Vol. 1 (1) , 235-240
Open AccessMÉTODO McCABE-THIELE - ANÁLISE COMPARATIVA DA DETERMINAÇÃO DA FRAÇÃO LÍQUIDA DA ALIMENTAÇÃO (OU CONDIÇÃO TÉRMICA DA ALIMENTAÇÃO)
O método McCabe-Thiele para dimensionamento de colunas de destilação é amplamente conhecido. Dentro desse método, há uma variável relacionada com a condi...
- Open Access
- 28 April 2009
- Published by Universidade Estadual de Maringa in Acta Scientiarum. Technology
- Vol. 31 (1) , 43-50
Estimação das emissões originadas de veículos leves na cidade de Maringá para o ano de 2005
Estimação das emissões originadas de veículos leves na cidade de Maringá para o ano de 2005 - DOI: 10.4025/actascitechnol.v31i1.6864
- 28 April 2009
- Published by Universidade Estadual de Maringa in Acta Scientiarum. Technology
- Vol. 31 (1) , 43-50
Open AccessEstimação das emissões originadas de veículos leves na cidade de Maringá para o ano de 2005
Estimação das emissões originadas de veículos leves na cidade de Maringá para o ano de 2005 - DOI: 10.4025/actascitechnol.v31i1.6864
- 1 January 2009
- Published by Elsevier in Journal of Hazardous Materials
- Vol. 161 (2-3) , 1404-1412
A comparative study for the ion exchange of Fe(III) and Zn(II) on zeolite NaY
- 1 January 2009
- Published by Elsevier in Journal of Hazardous Materials
- Vol. 161 (2-3) , 1404-1412
A comparative study for the ion exchange of Fe(III) and Zn(II) on zeolite NaY
- Open Access
- 1 September 2008
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 11 (3) , 365-369
Dynamic isotherms of dye in activated carbon
Textile industrial wastewaters have significant quantities of dyes. Adsorption processes using industrials rejects may help in the treatment of these effluents. In this context, uptake of Reactive Blue 5G dye by babassu coconut shell activated carbon was studied with upstream flow fixed-bed experiments. First, the minimum flow rate that minimizes the diffusion effects of 4 mL/min was chosen within the range investigated (2-10 mL/min). Then, the breakthrough curves were obtained for this flow rate for different initial dye concentrations (13.15102.0 mg/L) and temperature of 30 °C. The mass retained until bed saturation in each experiment was used to obtain the dynamic isotherms, which showed a favorable dye uptake behavior with a maximum adsorption capacity of 12.9 mg.g-1. The irreversible model fitted the experimental data well when compared to Langmuir and Freundlich models. A LDF model simulated the experimental breakthrough curves, and the bed axial dispersion and mass transfer coefficients were estimated
- 1 September 2008
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 11 (3) , 365-369
Open AccessDynamic isotherms of dye in activated carbon
Textile industrial wastewaters have significant quantities of dyes. Adsorption processes using industrials rejects may help in the treatment of these effluents. In this context, uptake of Reactive Blue 5G dye by babassu coconut shell activated carbon was studied with upstream flow fixed-bed experiments. First, the minimum flow rate that minimizes the diffusion effects of 4 mL/min was chosen within the range investigated (2-10 mL/min). Then, the breakthrough curves were obtained for this flow rate for different initial dye concentrations (13.15102.0 mg/L) and temperature of 30 °C. The mass retained until bed saturation in each experiment was used to obtain the dynamic isotherms, which showed a favorable dye uptake behavior with a maximum adsorption capacity of 12.9 mg.g-1. The irreversible model fitted the experimental data well when compared to Langmuir and Freundlich models. A LDF model simulated the experimental breakthrough curves, and the bed axial dispersion and mass transfer coefficients were estimated
- Open Access
- 1 March 2003
- Published by FapUNIFESP (SciELO) in Brazilian Journal of Chemical Engineering
- Vol. 20 (1) , 81-86
Generalization of drying curves in conductive/convective drying of cellulose
The objective of this work is to analyze the possibility of applying the drying curves generalization methodology to the conductive/convective hot plate drying of cellulose. The experiments were carried out at different heated plate temperatures and air velocities over the surface of the samples. This kind of approach is very interesting because it permits comparison of the results of different experiments by reducing them to only one set, which can be divided into two groups: the generalized drying curves and the generalized drying rate curves. The experimental apparatus is an attempt to reproduce the operational conditions of conventional paper dryers (ratio of paper/air movement) and consists of a metallic box heated by a thermostatic bath containing an upper surface on which the cellulose samples are placed. Sample material is short- and long-fiber cellulose sheets, about 1 mm thick, and ambient air was introduced into the system by a adjustable blower under different conditions. Long-fiber cellulose generalized curves were obtained and analyzed first individually and then together with the short-fiber cellulose results from Motta Lima et al. (2000 a,b). Finally, a set of equations to fit the generalized curves obtained was proposed and discussed.
- 1 March 2003
- Published by FapUNIFESP (SciELO) in Brazilian Journal of Chemical Engineering
- Vol. 20 (1) , 81-86
Open AccessGeneralization of drying curves in conductive/convective drying of cellulose
The objective of this work is to analyze the possibility of applying the drying curves generalization methodology to the conductive/convective hot plate drying of cellulose. The experiments were carried out at different heated plate temperatures and air velocities over the surface of the samples. This kind of approach is very interesting because it permits comparison of the results of different experiments by reducing them to only one set, which can be divided into two groups: the generalized drying curves and the generalized drying rate curves. The experimental apparatus is an attempt to reproduce the operational conditions of conventional paper dryers (ratio of paper/air movement) and consists of a metallic box heated by a thermostatic bath containing an upper surface on which the cellulose samples are placed. Sample material is short- and long-fiber cellulose sheets, about 1 mm thick, and ambient air was introduced into the system by a adjustable blower under different conditions. Long-fiber cellulose generalized curves were obtained and analyzed first individually and then together with the short-fiber cellulose results from Motta Lima et al. (2000 a,b). Finally, a set of equations to fit the generalized curves obtained was proposed and discussed.