Part Wei Ken
Research Subjects
Part Wei Ken has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Chee Ban Cheah
School of Housing, Building and Planning, Universiti Sains Malaysia, 11800 Penang, Malaysia
3 shared publications Mahyuddin Ramli
2 shared publications- Mahyuddin Ramli
Universiti Sains Malaysia
1 shared publication - Mohd Mustafa Al Bakri Abdullah
Universiti Malaysia Perlis (UniMAP), Faculty of Chemical Engineering & Technology, Universiti Malaysia Perlis 01000 Perlis, Malaysia
1 shared publication Nur Afiqah Maliki
Department of Civil Engineering Technology, Faculty of Engineering Technology, Universiti Malaysia Perlis (UniMAP), 02100 Padang Besar, Perlis, Malaysia
1 shared publication- Rafiza Abd Razak
Faculty of Civil Engineering and Technology, University of Malaysia Perlis (UniMAP),Perlis, Malaysia; Geopolymer and Green Technology, Centre of Excellence (CEGeoGTech), University of Malaysia Perlis (UniMAP), Perlis, Malaysia
1 shared publication
Latest Publications
- 3 May 2021
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2339 (1) , 020201
Performance of fly ash based geopolymer concrete in seawater exposure
Geopolymer is a new development in the world of concrete which cement is replaced by pozzolanic materials such as fly ash and activated by an alkali activator. Alkali activator will act as a binder in concrete mixtures. An exposure condition of seawater to the geopolymer concrete is significant to be studied since the properties of concrete will be affected especially exposure to an aggressive environment. The aim of this study is to evaluate the durability of fly ash-based geopolymer concrete in seawater exposure, then compared to ordinary Portland cement (OPC) concrete. The ratios of fly ash to alkali activator (FA/AA) and sodium silicate to sodium hydroxide (Na2SiO3/NaOH) were fixed as 2.0 and 2.5, respectively. The concentration of NaOH used was 12M. The fly ash will be mixed with alkali activator until homogeneous. After moulding process, the sample of concrete will be immersed in seawater for 7, 14, 21, 28 and 60 days. The results showed that the density of geopolymer concrete was higher than OPC concrete. The water absorption for 60 days of curing showed the geopolymer concrete was 0.9%, meanwhile OPC concrete achieved 8.3%. The different percentage of weight loss test for geopolymer concrete and OPC concrete was 1%. The compressive strength for geopolymer concrete was reported as higher than OPC concrete.
- 3 May 2021
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2339 (1) , 020201
Performance of fly ash based geopolymer concrete in seawater exposure
Geopolymer is a new development in the world of concrete which cement is replaced by pozzolanic materials such as fly ash and activated by an alkali activator. Alkali activator will act as a binder in concrete mixtures. An exposure condition of seawater to the geopolymer concrete is significant to be studied since the properties of concrete will be affected especially exposure to an aggressive environment. The aim of this study is to evaluate the durability of fly ash-based geopolymer concrete in seawater exposure, then compared to ordinary Portland cement (OPC) concrete. The ratios of fly ash to alkali activator (FA/AA) and sodium silicate to sodium hydroxide (Na2SiO3/NaOH) were fixed as 2.0 and 2.5, respectively. The concentration of NaOH used was 12M. The fly ash will be mixed with alkali activator until homogeneous. After moulding process, the sample of concrete will be immersed in seawater for 7, 14, 21, 28 and 60 days. The results showed that the density of geopolymer concrete was higher than OPC concrete. The water absorption for 60 days of curing showed the geopolymer concrete was 0.9%, meanwhile OPC concrete achieved 8.3%. The different percentage of weight loss test for geopolymer concrete and OPC concrete was 1%. The compressive strength for geopolymer concrete was reported as higher than OPC concrete.
- 1 March 2017
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 29 (3)
Effect of Sodium Silicate and Curing Regime on Properties of Load Bearing Geopolymer Mortar Block
The high embodied energy of conventional geopolymer production, which resulted from the necessity of high alkaline activator content and heat curing, hinders the transition of geopolymer technology toward industrial applications. This paper introduces a novel geopolymer system based on hybridization between high calcium wood ash (HCWA) and pulverized fuel ash (PFA), which use a low percentage of alkaline activator (5% of binder weight), ambient temperature curing, and a pressurized forming method for the fabrication of load bearing masonry unit. The elimination of alkali hydroxide was made possible by the Arcanite mineral (approximately 12%), which is inherently present in HCWA. The HCWA-PFA geopolymer mortar blocks with various sodium silicate content (0–5%) and curing regime (water and moist curing) were assessed in terms of mechanical (compressive, flexural, and UPV) and durability performance (water absorption, total porosity, and intrinsic air permeability) over a curing period of up to 90 da...
- 1 March 2017
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 29 (3)
Effect of Sodium Silicate and Curing Regime on Properties of Load Bearing Geopolymer Mortar Block
The high embodied energy of conventional geopolymer production, which resulted from the necessity of high alkaline activator content and heat curing, hinders the transition of geopolymer technology toward industrial applications. This paper introduces a novel geopolymer system based on hybridization between high calcium wood ash (HCWA) and pulverized fuel ash (PFA), which use a low percentage of alkaline activator (5% of binder weight), ambient temperature curing, and a pressurized forming method for the fabrication of load bearing masonry unit. The elimination of alkali hydroxide was made possible by the Arcanite mineral (approximately 12%), which is inherently present in HCWA. The HCWA-PFA geopolymer mortar blocks with various sodium silicate content (0–5%) and curing regime (water and moist curing) were assessed in terms of mechanical (compressive, flexural, and UPV) and durability performance (water absorption, total porosity, and intrinsic air permeability) over a curing period of up to 90 da...
- Top Cited Papers
- 1 February 2015
- Published by Elsevier in Construction and Building Materials
- Vol. 77, 370-395
An overview on the influence of various factors on the properties of geopolymer concrete derived from industrial by-products
- 1 February 2015
- Published by Elsevier in Construction and Building Materials
- Vol. 77, 370-395
Top Cited PapersAn overview on the influence of various factors on the properties of geopolymer concrete derived from industrial by-products