JFJosé Roberto Delalibera Finzer

José Roberto Delalibera Finzer

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


José Roberto Delalibera Finzer has a total of 80 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Desenvolvimento e construção de um controlador eletrônico para automação de reator industrial

    by Raian Sena, Lucas Estevam, José Finzer, Carlos Dos Santos, Lucio Junior

    A automação de processos industriais tem se mostrado fundamental para o aumento da eficiência e da qualidade na engenharia. O objetivo deste projeto é o desenvolvimento e construção de um controlador eletrônico microcontrolado para reatores industriais, tendo como características o baixo custo, tecnologia simples de implementar e fácil acesso comercial. O sistema proposto, além de confiável, é capaz de automatizar tanques de mistura industrial, destinados a multiprocessos por batelada, oferecendo maior viabilidade se comparado a projetos tradicionais que utilizam recursos de automação de alto custo. A placa eletrônica desenvolvida utiliza o microcontrolador ATmega328P, sendo responsável por controlar o acionamento dos motores, resistências de aquecimento, válvulas e sinalização sonora. Uma interface utilizando um display alfanumérico é incorporada ao hardware, auxiliando no monitoramento e operação do equipamento. Depois da construção do hardware e software, todos os recursos da placa de controle foram devidamente testados em bancada e os resultados obtidos evidenciam sua operação confiável e satisfatória, de acordo com o esperado. Conclui-se que através do uso das tecnologias acessíveis e de baixo custo no mercado, é possível desenvolver sistemas que atendam às necessidades de fabricantes de máquinas e empresas do setor industrial, reduzindo custos e aumentando a produtividade.

  • Open Access

    AUTOMAÇÃO DE TANQUE DE MISTURA INDUSTRIAL DESTINADO A MULTIPROCESSOS POR BATELADA

    by Lucas de Oliveira Estevam, Raian Souza Sena, Lúcio Rogério Júnior, José Roberto Delalibera Finzer, Edilberto Pereira Teixeira

    A automação de processos industriais tem se mostrado fundamental para o aumento da eficiência, qualidade e confiabilidade na engenharia química. Este trabalho apresenta o desenvolvimento e a construção de um tanque de mistura automatizado destinado a multiprocessos por batelada, utilizando tecnologias acessíveis e de baixo custo. O equipamento foi projetado com auxílio de softwares de modelagem e construído em aço inoxidável, garantindo resistência química e condições adequadas de sanitização. Diferentes impulsionadores foram empregados para atender distintos tipos de mistura, promovendo eficiente homogeneização do conteúdo. O sistema de automação foi desenvolvido a partir do microcontrolador ATmega328P, responsável pelo controle dos motores de agitação, resistências elétricas de aquecimento, válvulas, sensores de temperatura e nível, além da sinalização sonora do equipamento. Uma interface homem-máquina, composta por display alfanumérico, foi incorporada ao sistema para facilitar a operação e o monitoramento do processo em tempo real. Após o desenvolvimento do hardware e software, foram realizados testes em bancada para validação dos recursos implementados. Os resultados demonstraram operação confiável e satisfatória, evidenciando a eficiência do controle térmico, da agitação e da automação do sistema. O protótipo mostrou-se adequado para aplicações em escala experimental na produção de compostos químicos, cosméticos e farmacêuticos. Conclui-se que o uso de tecnologias simples, acessíveis e de fácil implementação possibilita o desenvolvimento de sistemas automatizados eficientes, capazes de atender às necessidades de fabricantes de máquinas, pequenas empresas e centros de pesquisa, reduzindo custos operacionais e aumentando a produtividade, além de apresentar potencial para futuras expansões e integração com sistemas supervisórios.

  • Open Access

    REAÇÃO DE HIDRÓXIDO DE CÁLCIO COM GÁS CARBÔNICO: GRADIENTE DE VELOCIDADE NA CÂMARA DO JAR TEST

    by Helenice Saud Sallum, José Roberto Delalibera Finzer

    Tratamento de água para consumo humano tem como grande desafio à estabilidade do padrão de qualidade da água no sistema de abastecimento. Tem-se a preocupação com a alta concentração de cálcio, presente em regiões cujo solo é constituído pela erosão de rochas calcáreas acarretando águas com a presença de cálcio, ultrapassando os limites prescritos pelos órgãos regulamentadores, que traz malefícios à saúde e acarreta limitações para utilização em vários segmentos. O objetivo deste estudo consistiu em efetuar a reação de cálcio contido em água usando gás carbônico e quantificando o gradiente de velocidade usando o equipamento Jar Test. Os gradientes de concentração operacionais foram: 5,2 vezes maior do que os menores gradientes usados na coagulação e floculação em tratamento de água; e de 0,074 a 0,71 menor que os maiores gradientes de velocidade descritos, respectivamente.

  • Open Access

    Drying Grapes for Raisin Production

    by André Luís Teixeira Fernandes, Felipe Thalles Moreira Silva, Magda Angélica Azenha Marques, Marília da Conceição Ferreira Baptista, Susana Andreia Alves da Rocha, Larissa Silva Paiva, José Roberto Delalibera Finzer

    Objective: The aim of this study was to investigate the influence of bleaching grapes prior to drying for raisin production. Theoretical Framework: Removing the waxy coating from the surface of the grapes reduces their resistance to heat and mass transfer. Method: Candy Crunch™ grapes, produced by Outro Chão – Agricultura Biológica; Lisbon – Portugal, were blanched for 2 minutes in water at a temperature of 92.0ºC and their drying performance was verified by comparing them with fresh grapes. The grape moisture content was obtained in an oven at 105ºC, achieving an average of 82.1% (wb) and a sphericity of 0.83. The average initial masses of six blanched and unblanched grapes, before drying, were: 42.28 and 40.24 g. Results and Discussion: After drying, under the same time and operating conditions, the average masses were: 24.88 and 34.90 g. Therefore, the mass reduction after drying was 41.3% and 13.3% for the blanched and unblanched grapes, respectively. Research Implications: There was a 30% reduction in the heat exchange area and mass of the grapes at the end of drying when blanching is carried out beforehand; for unbleached grapes, the area reduction was 9%. Originality/Value: Considerations are made regarding the heat and mass transfer coefficients, comparing the start of drying with the result after 340 minutes of processing. These results are important in grape processing studies and necessary for dryer design.

  • Open Access

    Integrated Evaporation and Treatment System for Incineration Waste Gases

    by Diogo Henrique Caramori Manzan, Edilberto Pereira Teixeira, José Roberto Delalibera Finzer

    Objective: The objective of this study is to analyze and evaluate the technical, environmental, and operational efficiency of an integrated treatment system for agrochemical industrial waste, consisting of physicochemical treatment stages, multiple-effect vacuum evaporation, fixed-bed incineration, and wet gas treatment, with emphasis on volume reduction, thermal destruction of hazardous compounds, and reuse of the treated condensate within the process itself. Specifically, it seeks to verify the system’s performance in the concentration and removal of contaminants originating from waste generated in the manufacture of the herbicide Tebuthiuron, as well as to evaluate the effectiveness of the condensate polishing stages in reducing micropollutants, ensuring environmental compliance, operational safety, and sustainability of the hazardous waste management process. Theoretical Framework: The management of hazardous industrial waste requires technologies capable of reducing volume, toxicity, and environmental impacts. In the agrochemical sector, these wastes present high complexity, requiring integrated treatment systems. Physicochemical treatment, through coagulation, flocculation, and sedimentation, is used to separate solids and reduce the initial pollutant load. Evaporation concentrates effluents by removing the solvent, being more efficient when operated under vacuum and in multiple effects. Incineration promotes the thermal destruction of hazardous compounds at high temperatures, with reduction of mass and volume. The generated gases must be treated by cooling, washing, and particle removal systems to ensure environmental compliance. The reuse of internal streams, such as treated condensate, follows principles of cleaner production and circular economy, being enabled by polishing with membranes and activated carbon. The integration of these processes constitutes an efficient and sustainable solution for the treatment of hazardous waste. Method: The research is characterized as an applied case study, with qualitative and quantitative approaches, developed in an industrial agrochemical waste treatment facility. The study has a descriptive and analytical character, aiming to evaluate the performance of an integrated hazardous waste treatment system. Initially, a technical-operational survey of the process units was carried out, covering the stages of physicochemical treatment, multiple-effect vacuum evaporation, fixed-bed incineration, and wet gas treatment. This stage included document analysis, direct field observation, and data collection from automation systems. Representative samples were collected from the main process streams: raw waste, clarified effluent, concentrate, condensate, and treated effluents. Liquid samples were subjected to physicochemical analyses to determine pH, solids, and target compound concentration, allowing evaluation of the efficiency of each stage. The data were analyzed by comparing inlet and outlet streams of each unit, enabling the calculation of removal rates, concentration factors, and volumetric reduction. In parallel, operational parameters such as temperature, pressure, flow rate, and energy consumption were evaluated, seeking to correlate technical performance and operational efficiency. The results were interpreted in light of the theoretical framework and current environmental legislation, allowing assessment of the technical, environmental, and operational feasibility of the integrated hazardous waste treatment system. Results and Discussion: The results demonstrated high efficiency of the integrated system in volume reduction and removal of contaminants from agrochemical waste. In the physicochemical treatment stage, coagulation and flocculation enabled efficient phase separation, generating a clarified effluent with low solids content and a concentrated sludge directed to incineration. In the multiple-effect vacuum evaporation system, an average reduction of approximately 80% of the initial volume was observed, concentrating hazardous organic compounds and significantly reducing the volume to be thermally treated. This stage proved to be essential for the economic and operational optimization of the process. Condensate polishing showed high efficiency in removing the target contaminant, with successive reductions after reverse osmosis and ultrafiltration, reaching concentrations compatible with internal reuse in the gas scrubbing system. This result highlights the system’s potential to promote water savings and alignment with cleaner production principles. Incineration of the sludge and concentrate ensured the thermal destruction of hazardous compounds, with stable operation in the primary and secondary chambers. The gas treatment system, composed of cooling, washing, and particle separation stages, proved to be efficient in controlling atmospheric pollutants, ensuring environmental compliance. In an integrated manner, the results confirm the technical, environmental, and operational feasibility of the proposed system for the treatment of hazardous industrial waste. Research Implications: The research demonstrates that the integration of physicochemical treatment, evaporation, incineration, and gas treatment is technically feasible and effective for hazardous industrial waste. From an environmental perspective, the system ensures high contaminant removal and control of atmospheric emissions, reducing pollution risks and meeting legal requirements. The reuse of treated condensate contributes to water savings and cleaner production practices. From an economic standpoint, the prior concentration of waste reduces the volume sent for thermal destruction, lowering operational costs. In terms of management, the results support strategic decisions focused on sustainability and socio-environmental responsibility. Originality/Value: The study presents originality by integrating, within a single operational system, stages of...

  • Obtenção de aguardente a partir da fermentação de batata doce

    by Constância Oliveira Venâncio da Silva, Jarod Jonahtan Costa Batista, Lisciomára Lacerda de Souza, Livia Molina da Silva, Maria Eduarda Soares Rezende, Matheus Vasconcelos Ferreira, José Roberto Delalibera Finzer, José Renato Buêncio, Marcelo Costa Dias, Ana Flávia Mendonça Santana

  • Open Access

    Air Quality: Case Study in Civil Construction

    by José Carlos Pereira Júnior, José Roberto Delalibera Finzer

    Objective: The objective of this study is to investigate the quality of atmospheric air in the construction industry environment, with the aim of reducing the levels of pollutants dispersed in the atmosphere, improving the quality of the air and the life of the worker. Theoretical Framework: In this topic, the main concepts and theories that underpin the research are presented. Dust, gases and particulate matter stand out. Based on literature and references such as: CONAMA and CETESB, there are recommended tolerance limit levels, providing a solid basis for understanding the context of the investigation. Method: The methodology adopted for this research involves measuring the air in the construction environment on alternate days, activities performed and work exposure. Workers at construction sites were evaluated while performing different work activities, highlighting their work routine to identify and identify harmful chemical contaminants. Data collection was performed using devices, the JD-3002 Air Quality and air sampling pumps with an electronic laminar flow sensor from the Gilian brand, model BDX-II. The devices were set up at the construction site on alternate days. Air conditions were collected and recorded and sent to the laboratory. The laboratory analysis followed the MDHS 14/3 procedure – Gravimetry. Results and Discussion: The results obtained revealed the levels of impurities in the air, as well as their quantification. The parameters measured and identified showed variations in relation to the values ​​established by standards, undergoing changes in the same location. Of the pollutants analyzed in the activities developed at the construction sites, values ​​above the permitted level were identified for CO2 and local temperature. The Particulate Matter in several measurements showed the respirable fraction close to the permitted limit. The best results were during the 4th inspection, the day was “humid” due to the action of local rain with small gusts of wind. In the discussion section, these results are contextualized considering the theoretical framework, highlighting the implications and relationships identified. Research Implications: The practical and theoretical implications of this research are discussed, providing insights into how the results can be applied or influence practices in the field of the construction environment. Originality/Value: This study contributes to quantifying air quality in construction work environments. The relevance and value of this research are evidenced by raising and quantifying acceptable tolerance limits according to legislation, as well as warning about the permanence and dispersion of these contaminants, which in high concentrations are harmful to human health.

  • Open Access

    Malt powder and straw for formulation of balanced feeds for animal feed

    by Ana Flávia Mendonça Santana, Daniel Luiz Folador Carvalho, Evandro José Rigo, Aline Claro de Oliveira, José Roberto Delalíbera Finzer, André Luís Teixeira Fernandes

    Malt dust and straw is an organic solid residue originating from the beginning of the beer production process. In this research or study, chemical and physical-chemical analyzes were carried out to characterize the malt powder and straw in nutritional terms. The experimental procedure included the collection of industrial waste, grinding, granulometry analysis, chemical analysis: ash, total nitrogen, crude protein, ether extract, crude fiber, neutral detergent fiber, acid detergent fiber, carbohydrates and micro and macronutrients. Contents of 97.61% dry matter, 13.31% crude protein, 2.34% ether extract, 9.02% crude fiber and 69.91% non-nitrogen extractive were found. The levels of micro and macro nutrients present low values of Ca, Na, Mn. However, Ca can be supplemented in the diet with calcitic limestone and sodium by ingesting mineral salt. Malt powder and straw presented good nutritional value and can be used as one of the complements to a recipe in a balanced diet for animals.


  • Open Access

    Growth Kinetics of Anhydrous Citric Acid Under Optimized Conditions in a Vibrated Batch Crystallizer

    by Gustavo Araújo Teixeira, Antonio Carlos Gomes de Sousa Jr, Ricardo Amâncio Malagoni, José Roberto Delalibera Finzer

    Objective: The aim of this paper is to investigate the crystallization of citric acid on a vibrated bed within a stainless-steel crystallizer, featuring a jacket and a trunk-conical shape, utilizing a constrained quantity of seed crystals. Theoretical Framework: This study assessed mass yield and characteristic dimensions in the crystallization of anhydrous citric acid using a vibrated bed batch crystallizer, employing a limited quantity of seed crystals. Method: Operational optimization of the process was conducted using central composite design (CCD), considering the independent variables: dimensionless vibration number, supersaturation level, and seed population. The operating temperature was set at 55°C. The condition yielding maximum mass was utilized to study the growth kinetics over a time range from 0.5 hours to 2 hours. Characteristic dimension and concentration were monitored as a function of crystallization time. Results and Discussion: In two hours of operation, the crystal mass increased by 157%, and the characteristic dimension increased to approximately 42%. Growth rates, overall mass transfer coefficient, and growth kinetics order were determined. Originality: This article consists of a contribution to the use of vibration to improve crystallization with the application of vibration to improve the transfer of heat and mass.

  • Open Access

    HOPS: The Aromatic Ingredient of Breweries

    by Ana Flávia Mendonça Santana, André Luís Teixeira Fernandes, Everaldo Miranda, Leonardo Otávio Coronado, Lourena Rios Tibery, José Roberto Delalibera Finzer

    Objective: The main objective of this study is to produce and characterize the raw material used to manufacture beer, including planting and harvesting by one of the largest brewing groups in the country, the Petropólis group, with a unit installed in the city of Uberaba/MG with a built area of 108,000 m². Theoretical Framework: Most hops used for brewing in Brazil are imported from countries such as Germany and the United States. However, certain varieties have adapted to the Brazilian climate and achieved significant yields and qualities. Method: Hop samples were collected in the city of Uberaba-MG. Mettler Toledo® moisture content measuring equipment, model HE53, was used. The hop samples were dried in the Pardal® New Hobby model dehydrator. In the granulometric analysis, the Tyler series of sieves was used. Color was measured using an Eoptis® reflectance colorimeter, model CLM-194. Results and Discussion: The hop cones, after drying stages, presented an average content of 91.67% of dry matter. The color difference between the dried leaves and the dried/ground hop cones, in relation to the standard, were ΔE = 64.16 and 57.77 respectively. The average Sauter diameter was 0.0347 cm. Research Implications: The Petrópolis group invests in planting hops that will enable the creation of a final product with its own identity in the future, which are beers produced with its own hops. Cultivation began with an area of ​​two hectares planted. Originality/Value: The group plans to double the plantation area and claims it is a promising business for the future, where many producers will invest in this cultivar, as today it is entirely possible to apply techniques such as prolonged lighting and irrigation systems.