Nicholas A. T. Brown
Research Subjects
Research Interests
Nicholas A. T. Brown has a total of 166 co-authors. Here are the top co-authors by number of shared publications:
- David Burton
Monash University
13 shared publications - John Sheridan
Fluids Laboratory for Aeronautical and Industrial Research (FLAIR), Department of Mechanical and Aerospace Engineering, Monash University, Melbourne, VIC 3800, Australia
11 shared publications - Marcus G. Pandy
Department of Mechanical Engineering, University of Melbourne, Parkville, Australia
9 shared publications - Anthony G. Schache
La Trobe University
7 shared publications - Dominic Thewlis
University of Adelaide
6 shared publications - Joel Thomas Fuller
Performance and Expertise Research Centre, Macquarie University, Macquarie Park, NSW, AUSTRALIA
6 shared publications
Latest Publications
- Open Access
- 1 October 2025
- Published by Elsevier in Journal of Science and Medicine in Sport
- Vol. 29 (4) , 360-367
Consensus-based guidelines for intervention protocols targeting the foot spring mechanism during landing: A modified Delphi study
- 1 October 2025
- Published by Elsevier in Journal of Science and Medicine in Sport
- Vol. 29 (4) , 360-367
Open AccessConsensus-based guidelines for intervention protocols targeting the foot spring mechanism during landing: A modified Delphi study
- 31 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Medical Robotics and Bionics
- Vol. 6 (1) , 213-223
A Novel Underactuated Robotic Orthosis for Individualized Gait Rehabilitation
It was observed that repetitive and task-oriented movements can strengthen muscles and improve the walking capabilities among patients experiencing gait impairments due to neurological disorders. However, the traditional physiotherapy is laborious, may not provide desired cadence and gait patterns, and due to the lack of therapists, it remains inaccessible to many patients. In the present work, we propose a novel low-cost treadmill-based underactuated gait rehabilitation exoskeleton that can provide naturalistic lower limb movements during walking. The exoskeleton mechanism has been devised by constraining a planar serial chain formed by revolute joints to resemble the Stephenson III six-bar linkage satisfying the adaptability and the end-effector trajectory requirements. The synthesized mechanism matches the concurrent knee and ankle joint movements during human walking relative to the hip, in terms of position and time. The kinematics and dynamic force analysis of the mechanism formulating the position, velocity, acceleration, and static torque have been presented. A full working lightweight exoskeleton prototype with a single actuated joint has been constructed. A pilot study with a healthy human subject has been performed. As a result, it is found that the proposed exoskeleton can provide naturalistic human motion trajectories suitable for rehabilitation purposes.
- 31 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Medical Robotics and Bionics
- Vol. 6 (1) , 213-223
A Novel Underactuated Robotic Orthosis for Individualized Gait Rehabilitation
It was observed that repetitive and task-oriented movements can strengthen muscles and improve the walking capabilities among patients experiencing gait impairments due to neurological disorders. However, the traditional physiotherapy is laborious, may not provide desired cadence and gait patterns, and due to the lack of therapists, it remains inaccessible to many patients. In the present work, we propose a novel low-cost treadmill-based underactuated gait rehabilitation exoskeleton that can provide naturalistic lower limb movements during walking. The exoskeleton mechanism has been devised by constraining a planar serial chain formed by revolute joints to resemble the Stephenson III six-bar linkage satisfying the adaptability and the end-effector trajectory requirements. The synthesized mechanism matches the concurrent knee and ankle joint movements during human walking relative to the hip, in terms of position and time. The kinematics and dynamic force analysis of the mechanism formulating the position, velocity, acceleration, and static torque have been presented. A full working lightweight exoskeleton prototype with a single actuated joint has been constructed. A pilot study with a healthy human subject has been performed. As a result, it is found that the proposed exoskeleton can provide naturalistic human motion trajectories suitable for rehabilitation purposes.
- Open Access
- 1 July 2023
- Published by SAGE Publications in Orthopaedic Journal of Sports Medicine
- Vol. 11 (7_suppl3)
Poster 293: Relationship between patellar tendon length and surgical treatment for patellar tendinosis
Objectives: Patellar tendinitis is a relatively common overuse injury that typically resolves with rehabilitation alone, however if it progresses to recalcitrant patellar tendinosis (RPT), surgical intervention is typically recommended. Patella alta, which has commonly been shown to lead to patellar dislocations, has recently shown to be related to patellar tendinitis. However, the relationship between patella alta and patellar tendinosis severe enough to warrant surgical intervention is unknown. The purpose of this study was to determine the association between patellar tendon length and surgical treatment for RPT. Methods: A cohort of 45 patients who were scheduled for surgery due to RPT, planning to receive a partial patellar tendinectomy, were retrospectively reviewed. A group of patients consented into a different study, planning to have an anterior cruciate ligament reconstruction (ACLR), were used as a control group. Exclusion criteria for the control group included previous patellar tendinosis. For both groups, the patellar tendon was measured preoperatively on a lateral radiograph with the knee in 60° of flexion, from the distal aspect of the inferior pole of the patella to the insertion site on the tibial tubercle. Other variables assessed were primary sport played and preoperative noninvolved quadriceps strength, measured isokinetically and normalized to body weight. The RPT patients were matched to the ACLR patients based on sex, height, and weight, leaving 45 patients in each group. Results: Mean age for the ACLR group was 26.0 ± 10.6 years and 25.1 ± 10.6 years for the RPT group. The groups had similar mean height (ACLR 70.2”, RPT 70.9”) and weight (ACLR 183.0 lbs, RPT 179.0 lbs), along with identical sex distribution with both having 71% males. Patients in the RPT group had statistically significantly longer patellar tendon lengths at 57.6 ± 7.4 mm compared to the ACLR group at 46.1 ± 7.5 mm, p<.001. The most frequent sports played for those in the RPT group were basketball (38%) and volleyball (22%); whereas for the ACLR group, it was basketball (22%) and football (20%). Those in the RPT group were not found to have a statistically significantly higher distribution of any individual sport played, however when the jumping sports of basketball and volleyball were combined, the RPT group showed a statistically significantly higher distribution of patients playing these sports compared to the ACLR group (60% vs 31%, p=.006). Isokinetic quadriceps strength failed to show a statistically significant difference between groups, p=.358. Conclusions: After taking into account sex, height, and weight, patients scheduled for surgery due to RPT had longer patellar tendons compared to those without a history of patellar tendinosis. Patients with RPT are also more likely to play jumping sports compared to those who sustained an ACL tear. Those with longer than normal patellar tendons who are diagnosed with patellar tendinitis, before it progresses to RPT, should consider rehabilitation and tailor their workload to avoid symptom progression and ultimately surgery.
- 1 July 2023
- Published by SAGE Publications in Orthopaedic Journal of Sports Medicine
- Vol. 11 (7_suppl3)
Open AccessPoster 293: Relationship between patellar tendon length and surgical treatment for patellar tendinosis
Objectives: Patellar tendinitis is a relatively common overuse injury that typically resolves with rehabilitation alone, however if it progresses to recalcitrant patellar tendinosis (RPT), surgical intervention is typically recommended. Patella alta, which has commonly been shown to lead to patellar dislocations, has recently shown to be related to patellar tendinitis. However, the relationship between patella alta and patellar tendinosis severe enough to warrant surgical intervention is unknown. The purpose of this study was to determine the association between patellar tendon length and surgical treatment for RPT. Methods: A cohort of 45 patients who were scheduled for surgery due to RPT, planning to receive a partial patellar tendinectomy, were retrospectively reviewed. A group of patients consented into a different study, planning to have an anterior cruciate ligament reconstruction (ACLR), were used as a control group. Exclusion criteria for the control group included previous patellar tendinosis. For both groups, the patellar tendon was measured preoperatively on a lateral radiograph with the knee in 60° of flexion, from the distal aspect of the inferior pole of the patella to the insertion site on the tibial tubercle. Other variables assessed were primary sport played and preoperative noninvolved quadriceps strength, measured isokinetically and normalized to body weight. The RPT patients were matched to the ACLR patients based on sex, height, and weight, leaving 45 patients in each group. Results: Mean age for the ACLR group was 26.0 ± 10.6 years and 25.1 ± 10.6 years for the RPT group. The groups had similar mean height (ACLR 70.2”, RPT 70.9”) and weight (ACLR 183.0 lbs, RPT 179.0 lbs), along with identical sex distribution with both having 71% males. Patients in the RPT group had statistically significantly longer patellar tendon lengths at 57.6 ± 7.4 mm compared to the ACLR group at 46.1 ± 7.5 mm, p<.001. The most frequent sports played for those in the RPT group were basketball (38%) and volleyball (22%); whereas for the ACLR group, it was basketball (22%) and football (20%). Those in the RPT group were not found to have a statistically significantly higher distribution of any individual sport played, however when the jumping sports of basketball and volleyball were combined, the RPT group showed a statistically significantly higher distribution of patients playing these sports compared to the ACLR group (60% vs 31%, p=.006). Isokinetic quadriceps strength failed to show a statistically significant difference between groups, p=.358. Conclusions: After taking into account sex, height, and weight, patients scheduled for surgery due to RPT had longer patellar tendons compared to those without a history of patellar tendinosis. Patients with RPT are also more likely to play jumping sports compared to those who sustained an ACL tear. Those with longer than normal patellar tendons who are diagnosed with patellar tendinitis, before it progresses to RPT, should consider rehabilitation and tailor their workload to avoid symptom progression and ultimately surgery.
- Open Access
- 13 April 2023
- Published by Springer Nature in European Journal of Applied Physiology
- Vol. 123 (8) , 1801-1808
Increased muscle force does not induce greater stretch-induced damage to calf muscles during work-matched heel drop exercise
Purpose: To investigate the effect of muscle force during active stretch on quantitative and qualitative indicators of exercise-induced muscle damage (EIMD) in the medial gastrocnemius (MG) muscle. Methods: Twelve recreationally active volunteers performed two trials of an eccentric heel drop exercise. Participants performed a single bout of low-load (body weight) and high-load (body weight + 30% body weight) exercises on separate legs. The total mechanical work output for each condition was matched between legs. Before, two hours and 48 h after each bout of eccentric exercise, electrically stimulated triceps surae twitch torque, muscle soreness, MG active fascicle length at maximum twitch torque and muscle passive stiffness were collected. Triceps surae electromyographic (EMG) activity, MG fascicle stretch and MG muscle–tendon unit (MTU) length were measured during the eccentric tasks. Results: The high-load condition increased triceps surae muscle activity by 6–9%, but reduced MG fascicle stretch (p < 0.001). MTU stretch was similar between conditions. The greater muscle force during stretch did not give rise to additional torque loss (5 vs 6%) or intensify muscle soreness. Conclusions: Adding 30% body weight during eccentric contractions has a modest impact on exercise-induced muscle damage in the medial gastrocnemius muscle. These results suggest that muscle load may not be an important determinant of stretch-induced muscle damage in the human MG muscle. The muscle investigated does exhibit large pennation angles and high series elastic compliance; architectural features that likely buffer muscle fibres against stretch and damage.
- 13 April 2023
- Published by Springer Nature in European Journal of Applied Physiology
- Vol. 123 (8) , 1801-1808
Open AccessIncreased muscle force does not induce greater stretch-induced damage to calf muscles during work-matched heel drop exercise
Purpose: To investigate the effect of muscle force during active stretch on quantitative and qualitative indicators of exercise-induced muscle damage (EIMD) in the medial gastrocnemius (MG) muscle. Methods: Twelve recreationally active volunteers performed two trials of an eccentric heel drop exercise. Participants performed a single bout of low-load (body weight) and high-load (body weight + 30% body weight) exercises on separate legs. The total mechanical work output for each condition was matched between legs. Before, two hours and 48 h after each bout of eccentric exercise, electrically stimulated triceps surae twitch torque, muscle soreness, MG active fascicle length at maximum twitch torque and muscle passive stiffness were collected. Triceps surae electromyographic (EMG) activity, MG fascicle stretch and MG muscle–tendon unit (MTU) length were measured during the eccentric tasks. Results: The high-load condition increased triceps surae muscle activity by 6–9%, but reduced MG fascicle stretch (p < 0.001). MTU stretch was similar between conditions. The greater muscle force during stretch did not give rise to additional torque loss (5 vs 6%) or intensify muscle soreness. Conclusions: Adding 30% body weight during eccentric contractions has a modest impact on exercise-induced muscle damage in the medial gastrocnemius muscle. These results suggest that muscle load may not be an important determinant of stretch-induced muscle damage in the human MG muscle. The muscle investigated does exhibit large pennation angles and high series elastic compliance; architectural features that likely buffer muscle fibres against stretch and damage.
- 25 November 2019
- Published by Taylor & Francis in Journal of Sports Sciences
- Vol. 38 (3) , 280-287
The influence of upper-body mechanics, anthropometry and isokinetic strength on performance in wrist-spin cricket bowling
Delivering a cricket ball with a wrist-spin (WS) bowling technique is considered one of the game’s most difficult skills. Limited biomechanical information exists for WS bowlers across skill levels. The purpose of this study was to compare biomechanical, isokinetic strength and anthropometric measures between elite (12) and pathway bowlers (eight). Data were collected using a motion analysis system, dynamometer and a level-two anthropometrist. A regression analysis identified that performance was best explained by increased wrist radial deviation torque and longitudinal axis rotational moments at the shoulder and wrist. From back foot impact (BFI) to ball release (BR), elite bowlers rotated their trunks less, experienced less trunk deceleration resulting in a more front-on position and increased pelvis rotation angular velocity. They also displayed an increased shoulder internal rotation moment as the upper arm moved from external into internal rotation and was a major contributor in the subsequent differences observed in the distal segments of the bowling limb. Anthropometric differences were observed at the wrist and finger joints and may be used to form the basis for talent identification programmes. This study highlights the important contribution to bowling performance of the musculature responsible for producing long axis rotations of the bowling limb.
- 25 November 2019
- Published by Taylor & Francis in Journal of Sports Sciences
- Vol. 38 (3) , 280-287
The influence of upper-body mechanics, anthropometry and isokinetic strength on performance in wrist-spin cricket bowling
Delivering a cricket ball with a wrist-spin (WS) bowling technique is considered one of the game’s most difficult skills. Limited biomechanical information exists for WS bowlers across skill levels. The purpose of this study was to compare biomechanical, isokinetic strength and anthropometric measures between elite (12) and pathway bowlers (eight). Data were collected using a motion analysis system, dynamometer and a level-two anthropometrist. A regression analysis identified that performance was best explained by increased wrist radial deviation torque and longitudinal axis rotational moments at the shoulder and wrist. From back foot impact (BFI) to ball release (BR), elite bowlers rotated their trunks less, experienced less trunk deceleration resulting in a more front-on position and increased pelvis rotation angular velocity. They also displayed an increased shoulder internal rotation moment as the upper arm moved from external into internal rotation and was a major contributor in the subsequent differences observed in the distal segments of the bowling limb. Anthropometric differences were observed at the wrist and finger joints and may be used to form the basis for talent identification programmes. This study highlights the important contribution to bowling performance of the musculature responsible for producing long axis rotations of the bowling limb.
- Open Access
- 1 August 2019
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology
- Vol. 235 (4) , 301-309
A wind-tunnel case study: Increasing road cycling velocity by adopting an aerodynamically improved sprint position
The main aim of this study was to evaluate the potential to reduce the aerodynamic drag by studying road sprint cyclists’ positions. A male and a female professional road cyclist participated in this wind-tunnel study. Aerodynamic drag measurements are presented for a total of five out-of-seat sprinting positions for each of the athletes under representative competition conditions. The largest reduction in aerodynamic drag measured for each athlete relative to their standard sprinting positions varied between 17% and 27%. The majority of this reduction in aerodynamic drag could be accounted for by changes in the athlete’s projected frontal area. The largest variation in repeat drag coefficient area measurements of out-of-seat sprint positions was 5%, significantly higher than the typical <0.5% observed for repeated testing of time-trial cycling positions. The majority of variation in repeated drag coefficient area measurements was attributed to reproducibility of position and sampling errors associated with time-averaged force measurements of large fluctuating forces.
- 1 August 2019
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology
- Vol. 235 (4) , 301-309
Open AccessA wind-tunnel case study: Increasing road cycling velocity by adopting an aerodynamically improved sprint position
The main aim of this study was to evaluate the potential to reduce the aerodynamic drag by studying road sprint cyclists’ positions. A male and a female professional road cyclist participated in this wind-tunnel study. Aerodynamic drag measurements are presented for a total of five out-of-seat sprinting positions for each of the athletes under representative competition conditions. The largest reduction in aerodynamic drag measured for each athlete relative to their standard sprinting positions varied between 17% and 27%. The majority of this reduction in aerodynamic drag could be accounted for by changes in the athlete’s projected frontal area. The largest variation in repeat drag coefficient area measurements of out-of-seat sprint positions was 5%, significantly higher than the typical <0.5% observed for repeated testing of time-trial cycling positions. The majority of variation in repeated drag coefficient area measurements was attributed to reproducibility of position and sampling errors associated with time-averaged force measurements of large fluctuating forces.
- Open Access
- 9 July 2019
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology
- Vol. 233 (4) , 514-525
A numerical model for the time-dependent wake of a pedalling cyclist
A method for computing the wake of a pedalling cyclist is detailed and assessed through comparison with experimental studies. The large-scale time-dependent turbulent flow is simulated using the Scale Adaptive Simulation approach based on the Shear Stress Transport Reynolds-averaged Navier–Stokes model. Importantly, the motion of the legs is modelled by joining the model at the hips and knees and imposing solid body rotation and translation to the lower and upper legs. Rapid distortion of the cyclist geometry during pedalling requires frequent interpolation of the flow solution onto new meshes. The impact of numerical errors, that are inherent to this remeshing technique, on the computed aerodynamic drag force is assessed. The dynamic leg simulation was successful in reproducing the oscillation in the drag force experienced by a rider over the pedalling cycle that results from variations in the large-scale wake flow structure. Aerodynamic drag and streamwise vorticity fields obtained for both static and dynamic leg simulations are compared with similar experimental results across the crank cycle. The new technique presented here for simulating pedalling leg cycling flows offers one pathway for improving the assessment of cycling aerodynamic performance compared to using isolated static leg simulations alone, a practice common in optimising the aerodynamics of cyclists through computational fluid dynamics.
- 9 July 2019
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology
- Vol. 233 (4) , 514-525
Open AccessA numerical model for the time-dependent wake of a pedalling cyclist
A method for computing the wake of a pedalling cyclist is detailed and assessed through comparison with experimental studies. The large-scale time-dependent turbulent flow is simulated using the Scale Adaptive Simulation approach based on the Shear Stress Transport Reynolds-averaged Navier–Stokes model. Importantly, the motion of the legs is modelled by joining the model at the hips and knees and imposing solid body rotation and translation to the lower and upper legs. Rapid distortion of the cyclist geometry during pedalling requires frequent interpolation of the flow solution onto new meshes. The impact of numerical errors, that are inherent to this remeshing technique, on the computed aerodynamic drag force is assessed. The dynamic leg simulation was successful in reproducing the oscillation in the drag force experienced by a rider over the pedalling cycle that results from variations in the large-scale wake flow structure. Aerodynamic drag and streamwise vorticity fields obtained for both static and dynamic leg simulations are compared with similar experimental results across the crank cycle. The new technique presented here for simulating pedalling leg cycling flows offers one pathway for improving the assessment of cycling aerodynamic performance compared to using isolated static leg simulations alone, a practice common in optimising the aerodynamics of cyclists through computational fluid dynamics.
- 1 July 2019
- Published by Elsevier in Physical Therapy in Sport
- Vol. 38, 192-198
A retrospective analysis of hamstring injuries in elite rugby athletes: More severe injuries are likely to occur at the distal myofascial junction
- 1 July 2019
- Published by Elsevier in Physical Therapy in Sport
- Vol. 38, 192-198
A retrospective analysis of hamstring injuries in elite rugby athletes: More severe injuries are likely to occur at the distal myofascial junction
- 29 April 2019
- Published by Wiley in Scandinavian Journal of Medicine & Science in Sports
- Vol. 29 (8) , 1083-1091
Late swing or early stance? A narrative review of hamstring injury mechanisms during high‐speed running
Hamstring injuries are highly prevalent in many running‐based sports, and predominantly affect the long head of biceps femoris. Re‐injury rates are also high and together lead to considerable time lost from sport. However, the mechanisms for hamstring injury during high‐speed running are still not fully understood. Therefore, the aim of this review was to summarize the current literature describing hamstring musculotendon mechanics and electromyography activity during high‐speed running, and how they may relate to injury risk. The large eccentric contraction, characterized by peak musculotendon strain and negative work during late swing phase is widely suggested to be potentially injurious. However, it is also argued that high hamstring loads resulting from large joint torques and ground reaction forces during early stance may cause injury. While direct evidence is still lacking, the majority of the literature suggests that the most likely timing of injury is the late swing phase. Future research should aim to prospectively examine the relationship between hamstring musculotendon dynamics and hamstring injury.
- 29 April 2019
- Published by Wiley in Scandinavian Journal of Medicine & Science in Sports
- Vol. 29 (8) , 1083-1091
Late swing or early stance? A narrative review of hamstring injury mechanisms during high‐speed running
Hamstring injuries are highly prevalent in many running‐based sports, and predominantly affect the long head of biceps femoris. Re‐injury rates are also high and together lead to considerable time lost from sport. However, the mechanisms for hamstring injury during high‐speed running are still not fully understood. Therefore, the aim of this review was to summarize the current literature describing hamstring musculotendon mechanics and electromyography activity during high‐speed running, and how they may relate to injury risk. The large eccentric contraction, characterized by peak musculotendon strain and negative work during late swing phase is widely suggested to be potentially injurious. However, it is also argued that high hamstring loads resulting from large joint torques and ground reaction forces during early stance may cause injury. While direct evidence is still lacking, the majority of the literature suggests that the most likely timing of injury is the late swing phase. Future research should aim to prospectively examine the relationship between hamstring musculotendon dynamics and hamstring injury.
- 1 January 2019
- Published by The Company of Biologists in Journal of Experimental Biology
- Vol. 222 (22)
Lower-limb joint mechanics during maximum acceleration sprinting
We explored how humans adjust the stance phase mechanical function of their major lower-limb joints (hip, knee, ankle) during maximum acceleration sprinting. Experimental data (motion capture and ground reaction force (GRF)) were recorded from eight participants as they performed overground sprinting trials. Six alternative starting locations were used to obtain a dataset that incorporated the majority of the acceleration phase. Experimental data were combined with an inverse-dynamics-based analysis to calculate lower-limb joint mechanical variables. As forward acceleration magnitude decreased, the vertical GRF impulse remained nearly unchanged whereas the net horizontal GRF impulse became smaller due to less propulsion and more braking. Mechanical function was adjusted at all three joints, although more dramatic changes were observed at the hip and ankle. The impulse from the ankle plantar-flexor moment was almost always larger than those from the hip and knee extensor moments. Forward acceleration magnitude was linearly related to the impulses from the hip extensor moment (R2=0.45) and the ankle plantar-flexor moment (R2=0.47). Forward acceleration magnitude was also linearly related to the net work done at all three joints, with the ankle displaying the strongest relationship (R2=0.64). The ankle produced the largest amount of positive work (1.55±0.17 J/kg) of all the joints, and provided a significantly greater proportion of the summed amount of lower-limb positive work as running speed increased and forward acceleration magnitude decreased. We conclude that the hip and especially the ankle represent key sources of positive work during the stance phase of maximum acceleration sprinting.
- 1 January 2019
- Published by The Company of Biologists in Journal of Experimental Biology
- Vol. 222 (22)
Lower-limb joint mechanics during maximum acceleration sprinting
We explored how humans adjust the stance phase mechanical function of their major lower-limb joints (hip, knee, ankle) during maximum acceleration sprinting. Experimental data (motion capture and ground reaction force (GRF)) were recorded from eight participants as they performed overground sprinting trials. Six alternative starting locations were used to obtain a dataset that incorporated the majority of the acceleration phase. Experimental data were combined with an inverse-dynamics-based analysis to calculate lower-limb joint mechanical variables. As forward acceleration magnitude decreased, the vertical GRF impulse remained nearly unchanged whereas the net horizontal GRF impulse became smaller due to less propulsion and more braking. Mechanical function was adjusted at all three joints, although more dramatic changes were observed at the hip and ankle. The impulse from the ankle plantar-flexor moment was almost always larger than those from the hip and knee extensor moments. Forward acceleration magnitude was linearly related to the impulses from the hip extensor moment (R2=0.45) and the ankle plantar-flexor moment (R2=0.47). Forward acceleration magnitude was also linearly related to the net work done at all three joints, with the ankle displaying the strongest relationship (R2=0.64). The ankle produced the largest amount of positive work (1.55±0.17 J/kg) of all the joints, and provided a significantly greater proportion of the summed amount of lower-limb positive work as running speed increased and forward acceleration magnitude decreased. We conclude that the hip and especially the ankle represent key sources of positive work during the stance phase of maximum acceleration sprinting.