Hannah Joerg
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hannah Joerg has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Matteo Pardini
German Aerospace Center (DLR) - Microwave and Radar Institute, Wessling, Germany
3 shared publications Irena Hajnsek
German Aerospace Center (DLR), Microwaves and Radar Institute, 82234 Wessling, Germany, and also with the Institute of Environmental Engineering, Swiss Federal Institute of Technology (ETH) Zurich, 8093 Zurich, Switzerland
2 shared publicationsKonstantinos P. Papathanassiou
German Aerospace Center (DLR), Microwaves and Radar Institute, 82234 Wessling, Germany
2 shared publications- Irena Hajnsek
Chair of Earth Observation and Remote Sensing, Institute of Environmental Engineering, ETH Zrich, Zrich, Switzerland
1 shared publication - Konstantinos P. Papathanassiou
German Aerospace Center (DLR), Microwaves and Radar Institute, Weling, Germany
1 shared publication
Latest Publications
- 28 June 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 11 (9) , 3014-3029
Sensitivity of SAR Tomography to the Phenological Cycle of Agricultural Crops at X-, C-, and L-band
Understanding the impact of soil and plant parameter changes in agriculture on Synthetic Aperture Radar (SAR) measurements is of great interest when it comes to monitor the temporal evolution of agricultural crops by means of SAR. In this regard, specific transitions between phenological stages in corn, barley, and wheat have been identified associated to certain dielectric and geometric changes, based on a time series of fully polarimetric multibaseline SAR data and in situ measurements. The data have been acquired in the frame of DLR's CROPEX campaign on six dates between May and July in 2014. The experiments reported in this paper address the sensitivity of X-, C-, and L-band to phenological transitions exploiting the availability of multiple baselines on each acquisition date. The application of tomographic techniques enables the estimation of the three-dimensional (3-D) backscatter distribution and the separation of ground and volume scattering components. Tomographic parameters have been derived at different frequencies, namely the center of mass of the profiles of the total and of the volume-only 3-D backscatter, and the ground and volume powers. Their sensitivity and ability to detect changes occurring on the ground and in the vegetation volume have been evaluated focusing on the added value provided by the 3-D resolution at the different frequencies and polarizations available.
- 28 June 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 11 (9) , 3014-3029
Sensitivity of SAR Tomography to the Phenological Cycle of Agricultural Crops at X-, C-, and L-band
Understanding the impact of soil and plant parameter changes in agriculture on Synthetic Aperture Radar (SAR) measurements is of great interest when it comes to monitor the temporal evolution of agricultural crops by means of SAR. In this regard, specific transitions between phenological stages in corn, barley, and wheat have been identified associated to certain dielectric and geometric changes, based on a time series of fully polarimetric multibaseline SAR data and in situ measurements. The data have been acquired in the frame of DLR's CROPEX campaign on six dates between May and July in 2014. The experiments reported in this paper address the sensitivity of X-, C-, and L-band to phenological transitions exploiting the availability of multiple baselines on each acquisition date. The application of tomographic techniques enables the estimation of the three-dimensional (3-D) backscatter distribution and the separation of ground and volume scattering components. Tomographic parameters have been derived at different frequencies, namely the center of mass of the profiles of the total and of the volume-only 3-D backscatter, and the ground and volume powers. Their sensitivity and ability to detect changes occurring on the ground and in the vegetation volume have been evaluated focusing on the added value provided by the 3-D resolution at the different frequencies and polarizations available.
- 1 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 56 (7) , 3976-3989
3-D Scattering Characterization of Agricultural Crops at C-Band Using SAR Tomography
The aim of this paper is to interpret and characterize the changes of the 3-D polarimetric scattering signatures of agricultural crops at C-band and to relate them to temporal changes of the soil and plant parameters. For this, a time series of multibaseline (MB) synthetic aperture radar (SAR) data acquired at C-band by the airborne F-SAR system of the German Aerospace Center over the Wallerfing test site in Germany was analyzed. The availability of MB SAR data enables the resolution of scattering contributions in height by means of SAR tomography. The tomographic profiles at different polarizations were analyzed regarding temporal changes for different crop types. First, it was investigated if the center of mass (CoM) of the vertical reflectivity profiles as a single parameter enables the tracking of changes in soil and vegetation. The results show that the vertical reflectivity profiles and their CoM do not allow resolving the ambiguity if a change originates from soil or vegetation dynamics as expected. Thus, the scattering contributions from ground and volume were separated in height, using a filtering approach, and used for the estimation of the ground and volume scattering powers by means of covariance matching. Comparing the outputs with coincident ground measurements showed that dielectric as well as geometric changes in the vegetation are traceable by the separated ground and volume powers. Finally, the estimated powers were analyzed with respect to orientation effects, i.e., to polarimetric anisotropic behavior. They were found to be not significant for the crops under study at C-band.
- 1 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 56 (7) , 3976-3989
3-D Scattering Characterization of Agricultural Crops at C-Band Using SAR Tomography
The aim of this paper is to interpret and characterize the changes of the 3-D polarimetric scattering signatures of agricultural crops at C-band and to relate them to temporal changes of the soil and plant parameters. For this, a time series of multibaseline (MB) synthetic aperture radar (SAR) data acquired at C-band by the airborne F-SAR system of the German Aerospace Center over the Wallerfing test site in Germany was analyzed. The availability of MB SAR data enables the resolution of scattering contributions in height by means of SAR tomography. The tomographic profiles at different polarizations were analyzed regarding temporal changes for different crop types. First, it was investigated if the center of mass (CoM) of the vertical reflectivity profiles as a single parameter enables the tracking of changes in soil and vegetation. The results show that the vertical reflectivity profiles and their CoM do not allow resolving the ambiguity if a change originates from soil or vegetation dynamics as expected. Thus, the scattering contributions from ground and volume were separated in height, using a filtering approach, and used for the estimation of the ground and volume scattering powers by means of covariance matching. Comparing the outputs with coincident ground measurements showed that dielectric as well as geometric changes in the vegetation are traceable by the separated ground and volume powers. Finally, the estimated powers were analyzed with respect to orientation effects, i.e., to polarimetric anisotropic behavior. They were found to be not significant for the crops under study at C-band.
- 31 July 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Geoscience and Remote Sensing Letters
- Vol. 14 (9) , 1570-1574
On the Separation of Ground and Volume Scattering Using Multibaseline SAR Data
In forest and agricultural scattering scenarios, the backscattered synthetic aperture radar (SAR) signature consists, depending on the frequency, of the superposition of ground and volume scattering contributions. Using multibaseline SAR data, SAR tomography techniques allow resolving contributions occurring at different heights. Two algorithms for the separation of ground and volume scattering are compared with respect to their ability to provide a coherent volume component that can be further used for parameter inversion, both of them requiring only the a priori known ground topography. Once the volume-only coherences are available, the total ground and volume scattering powers are estimated by means of a least squares fitting. The objective of this letter is to quantitatively evaluate the performance of this estimation by means of a Monte Carlo analysis with simulated data focusing on the impact of vertical resolution, errors in the knowledge of the ground topography and phase calibration residuals.
- 31 July 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Geoscience and Remote Sensing Letters
- Vol. 14 (9) , 1570-1574
On the Separation of Ground and Volume Scattering Using Multibaseline SAR Data
In forest and agricultural scattering scenarios, the backscattered synthetic aperture radar (SAR) signature consists, depending on the frequency, of the superposition of ground and volume scattering contributions. Using multibaseline SAR data, SAR tomography techniques allow resolving contributions occurring at different heights. Two algorithms for the separation of ground and volume scattering are compared with respect to their ability to provide a coherent volume component that can be further used for parameter inversion, both of them requiring only the a priori known ground topography. Once the volume-only coherences are available, the total ground and volume scattering powers are estimated by means of a least squares fitting. The objective of this letter is to quantitatively evaluate the performance of this estimation by means of a Monte Carlo analysis with simulated data focusing on the impact of vertical resolution, errors in the knowledge of the ground topography and phase calibration residuals.