Vladimir Osadchuk
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Vladimir Osadchuk has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
- Alexander V. Osadchuk
Faculty of Information Electronic Systems, Vinnytsia National Technical University, Khmelnytske Highway 95, 21021 Vinnytsia, Ukraine
12 shared publications - Ярослав Осадчук
Faculty of Information Electronic Systems, Vinnytsia National Technical University, Khmelnytske Highway 95, 21021 Vinnytsia, Ukraine
5 shared publications Iaroslav Osadchuk
Vinnytsia National Technical University
3 shared publicationsVinnytsia National Technical University
3 shared publicationsОлександр Осадчук
Вінницький національний технічний університет
3 shared publications- Andriy Semenov
Faculty of Information Electronic Systems, Vinnytsia National Technical University, Khmelnytske Highway 95, 21021 Vinnytsia, Ukraine
2 shared publications
Latest Publications
- Open Access
- 25 June 2024
- Published by Khmelnytskyi National University in Measuring and computing devices in technological processes
- No. 2,p. 143-153
НАДВИСОКОЧАСТОТНІ АВТОГЕНЕРАТОРНІ МІКРОЕЛЕКТРОННІ СЕНСОРИ ГАЗУ
Запропоновано надвисокочастотні автогенераторні мікроелектронні сенсори газу на основі транзисторних структур з від’ємним диференційним опором з первинними газочутливими елементами на базі МДН-ємнісної структури і МДН-польового транзистора з ізольованим каналом, причому первинні газочутливі елементи є активними елементами схем автогенераторів сенсорів, що спрощує конструкцію приладів. Виходячи з розгляду фізичних процесів у первинних газочутливих елементах і автогенераторах сенсорів, розроблено математичні моделі перетворювачів газу, на основі яких отримано параметричні залежності функцій перетворення і чутливості. Показано, що основний внесок у функції перетворення і чутливості вносить зміна концентрації газу. Це викликає зміну еквівалентної ємності і від’ємного диференційного опору автогенераторів сенсорів, що, у свою чергу, змінює вихідну частоту приладів. Чутливість сенсорів газу змінюється від 0,55 кГц/ppm до 1,63 кГц/ppm в діапазоні вимірюваної концентрації від 0 ppm до 2000 ppm. Отримані параметричні залежності функцій перетворення і чутливості показують можливість значно простіше отримувати основні характеристики сенсорів і наочно демонструють вплив кожного параметра первинних перетворювачів і параметрів автогенераторів на вихідну частоту сенсорів у порівнянні з розрахунками функцій перетворення і чутливості з еквівалентних схем приладів на основі розв’язку рівнянь Кірхгофа. У сенсорах газу з частотним виходом непотрібні аналого-цифрові перетворювачі і підсилювальні пристрої при подальшій обробці інформаційних сигналів, що здешевлює інформаційно-вимірювальну апаратуру, окрім того, можлива передача інформації на відстань при роботі сенсорів у діапазоні надвисоких частот.
- 25 June 2024
- Published by Khmelnytskyi National University in Measuring and computing devices in technological processes
- No. 2,p. 143-153
Open AccessНАДВИСОКОЧАСТОТНІ АВТОГЕНЕРАТОРНІ МІКРОЕЛЕКТРОННІ СЕНСОРИ ГАЗУ
Запропоновано надвисокочастотні автогенераторні мікроелектронні сенсори газу на основі транзисторних структур з від’ємним диференційним опором з первинними газочутливими елементами на базі МДН-ємнісної структури і МДН-польового транзистора з ізольованим каналом, причому первинні газочутливі елементи є активними елементами схем автогенераторів сенсорів, що спрощує конструкцію приладів. Виходячи з розгляду фізичних процесів у первинних газочутливих елементах і автогенераторах сенсорів, розроблено математичні моделі перетворювачів газу, на основі яких отримано параметричні залежності функцій перетворення і чутливості. Показано, що основний внесок у функції перетворення і чутливості вносить зміна концентрації газу. Це викликає зміну еквівалентної ємності і від’ємного диференційного опору автогенераторів сенсорів, що, у свою чергу, змінює вихідну частоту приладів. Чутливість сенсорів газу змінюється від 0,55 кГц/ppm до 1,63 кГц/ppm в діапазоні вимірюваної концентрації від 0 ppm до 2000 ppm. Отримані параметричні залежності функцій перетворення і чутливості показують можливість значно простіше отримувати основні характеристики сенсорів і наочно демонструють вплив кожного параметра первинних перетворювачів і параметрів автогенераторів на вихідну частоту сенсорів у порівнянні з розрахунками функцій перетворення і чутливості з еквівалентних схем приладів на основі розв’язку рівнянь Кірхгофа. У сенсорах газу з частотним виходом непотрібні аналого-цифрові перетворювачі і підсилювальні пристрої при подальшій обробці інформаційних сигналів, що здешевлює інформаційно-вимірювальну апаратуру, окрім того, можлива передача інформації на відстань при роботі сенсорів у діапазоні надвисоких частот.
- Open Access
- 29 September 2023
- Published by Khmelnytskyi National University in Measuring and computing devices in technological processes
- No. 3,p. 83-92
МІКРОЕЛЕКТРОННІ АВТОГЕНЕРАТОРНІ ПРИЛАДИ ДЛЯ ВИМІРЮВАННЯ ТОВЩИНИ МАТЕРІАЛІВ
Запропоновано і досліджено основні характеристики приладів вимірювання товщини матеріалів з частотним вихідним сигналом, конструкція яких будується на основі транзисторних структур з від’ємним диференційним опором. В якості первинних перетворювачів вимірювання товщини виступають конденсатори з прямокутними та круглими обкладинками, які є пасивними елементами автогенераторів, що спрощує конструкцію приладів вимірювання товщини. Розроблено математичні моделі приладів на основі принципу перетворення енергії постійного електричного поля в енергію змінного електричного поля, що дозволило розрахувати функції перетворення і чутливості приладів без використання складного методу отримання рівнянь Кірхгофа з еквівалентних схем перетворювачів та їх розрахунку чисельними методами на сучасних комп’ютерах. Показано, що основний внесок у зміну функцій перетворення і чутливості вносить зміна товщини вимірювального матеріалу, що викликає зміну еквівалентної ємності і від’ємного диференційного опору в коливальній системі автогенераторів, що, у свою чергу, змінює вихідну частоту приладів. Чутливість приладів вимірювання товщини змінюється від 0,4 кГц/мкм до 1,775 кГц/мкм в діапазоні товщин від 0 до 500 мкм. Розраховані аналітичні вирази функцій перетворення і чутливості наочно демонструють вплив кожного елемента первинних перетворювачів і елементів автогенераторів на вихідну частоту приладів. Прилади для вимірювання товщини з частотним виходом не потребують аналого-цифрових перетворювачів і підсилювальних пристроїв при подальшій обробці інформаційних сигналів, що здешевлює інформаційно-вимірювальну апаратуру. При роботі приладів у надвисоких частотах можлива передача інформації на відстань.
- 29 September 2023
- Published by Khmelnytskyi National University in Measuring and computing devices in technological processes
- No. 3,p. 83-92
Open AccessМІКРОЕЛЕКТРОННІ АВТОГЕНЕРАТОРНІ ПРИЛАДИ ДЛЯ ВИМІРЮВАННЯ ТОВЩИНИ МАТЕРІАЛІВ
Запропоновано і досліджено основні характеристики приладів вимірювання товщини матеріалів з частотним вихідним сигналом, конструкція яких будується на основі транзисторних структур з від’ємним диференційним опором. В якості первинних перетворювачів вимірювання товщини виступають конденсатори з прямокутними та круглими обкладинками, які є пасивними елементами автогенераторів, що спрощує конструкцію приладів вимірювання товщини. Розроблено математичні моделі приладів на основі принципу перетворення енергії постійного електричного поля в енергію змінного електричного поля, що дозволило розрахувати функції перетворення і чутливості приладів без використання складного методу отримання рівнянь Кірхгофа з еквівалентних схем перетворювачів та їх розрахунку чисельними методами на сучасних комп’ютерах. Показано, що основний внесок у зміну функцій перетворення і чутливості вносить зміна товщини вимірювального матеріалу, що викликає зміну еквівалентної ємності і від’ємного диференційного опору в коливальній системі автогенераторів, що, у свою чергу, змінює вихідну частоту приладів. Чутливість приладів вимірювання товщини змінюється від 0,4 кГц/мкм до 1,775 кГц/мкм в діапазоні товщин від 0 до 500 мкм. Розраховані аналітичні вирази функцій перетворення і чутливості наочно демонструють вплив кожного елемента первинних перетворювачів і елементів автогенераторів на вихідну частоту приладів. Прилади для вимірювання товщини з частотним виходом не потребують аналого-цифрових перетворювачів і підсилювальних пристроїв при подальшій обробці інформаційних сигналів, що здешевлює інформаційно-вимірювальну апаратуру. При роботі приладів у надвисоких частотах можлива передача інформації на відстань.
- Open Access
- 31 March 2023
- Published by Politechnika Lubelska in Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
- Vol. 13 (1) , 42-49
SELF-OSCILLATING PARAMETRIC HUMIDITY SENSOR WITH FREQUENCY OUTPUT SIGNAL
A self-oscillating parametric humidity sensor has been developed that implements the principle of "humidity-frequency" conversion into hybrid integrated circuit based on a microelectronic transistor structure with a negative differential resistance, in which the humidity-sensitive element is a resistor of the HR202 type. For the purposes of determining parameters self-oscillating parametric humidity sensor with frequency output a mathematical model has been developed that takes into account the effect of humidity on a sensitive resistive element, which is an integral element of the device. Based on the mathematical model, analytical expressions for the transformation function and the sensitivity equation are obtained. It is shown that the main contribution to the conversion function is made by relative humidity. The computer simulation and experimental studies of a self-oscillating parametric humidity sensor with a frequency output signal contributed to obtaining the main parameters and characteristics, such as the dependence of the generation frequency on changes in relative humidity in the range from 30% to 99%, the change in sensitivity on relative humidity, the dependence of the active and reactive components of the impedance in the frequency range from 50 kHz to 2 GHz; standing wave ratio, change in logarithmic magnitude and spectra of the output signal of a parametric humidity sensor with a frequency output signal in the LTE-800 Downlink frequency range. The obtained electrical characteristics confirm the operability of the developed device. The sensitivity of the developed self-oscillating parametric humidity sensor in the range of relative humidity change from 30% to 99% has a value from 332.8 kHz/% to 130.2 kHz/%.
- 31 March 2023
- Published by Politechnika Lubelska in Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
- Vol. 13 (1) , 42-49
Open AccessSELF-OSCILLATING PARAMETRIC HUMIDITY SENSOR WITH FREQUENCY OUTPUT SIGNAL
A self-oscillating parametric humidity sensor has been developed that implements the principle of "humidity-frequency" conversion into hybrid integrated circuit based on a microelectronic transistor structure with a negative differential resistance, in which the humidity-sensitive element is a resistor of the HR202 type. For the purposes of determining parameters self-oscillating parametric humidity sensor with frequency output a mathematical model has been developed that takes into account the effect of humidity on a sensitive resistive element, which is an integral element of the device. Based on the mathematical model, analytical expressions for the transformation function and the sensitivity equation are obtained. It is shown that the main contribution to the conversion function is made by relative humidity. The computer simulation and experimental studies of a self-oscillating parametric humidity sensor with a frequency output signal contributed to obtaining the main parameters and characteristics, such as the dependence of the generation frequency on changes in relative humidity in the range from 30% to 99%, the change in sensitivity on relative humidity, the dependence of the active and reactive components of the impedance in the frequency range from 50 kHz to 2 GHz; standing wave ratio, change in logarithmic magnitude and spectra of the output signal of a parametric humidity sensor with a frequency output signal in the LTE-800 Downlink frequency range. The obtained electrical characteristics confirm the operability of the developed device. The sensitivity of the developed self-oscillating parametric humidity sensor in the range of relative humidity change from 30% to 99% has a value from 332.8 kHz/% to 130.2 kHz/%.
- Open Access
- 30 March 2023
- Published by Ukrainian Research and Design Institute of Building Materials and Products in European Science
- No. sge18-03,p. 8-38
МАТЕМАТИЧНЕ МОДЕЛЮВАННЯ ЧАСТОТНИХ ПЕРЕТВОРЮВАЧІВ РАДІОВИМІРЮВАЛЬНОГО ПРИЛАДУ ІНДУКЦІЇ МАГНІТНОГО ПОЛЯ
Аннотация Measurement of the magnetic field induction as a property of the magnetic field is one of the most important tasks in the field of creation and maintenance of the navigation, orientation and stabilization systems; shielding of quantum computers, magnetic
- 30 March 2023
- Published by Ukrainian Research and Design Institute of Building Materials and Products in European Science
- No. sge18-03,p. 8-38
Open AccessМАТЕМАТИЧНЕ МОДЕЛЮВАННЯ ЧАСТОТНИХ ПЕРЕТВОРЮВАЧІВ РАДІОВИМІРЮВАЛЬНОГО ПРИЛАДУ ІНДУКЦІЇ МАГНІТНОГО ПОЛЯ
Аннотация Measurement of the magnetic field induction as a property of the magnetic field is one of the most important tasks in the field of creation and maintenance of the navigation, orientation and stabilization systems; shielding of quantum computers, magnetic
- 26 May 2022
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 309 (3)
SELF-OSCILLATING PARAMETRIC PRESSURE SENSORS
Self-oscillating parametric pressure sensors are proposed based on transistor microelectronic structures with negative differential resistance with primary strain-sensing resistor and diode, and the primary strain-sensing elements are active elements of the self-oscillator circuit, which simplifies the design of pressure sensors. It is also proposed to replace the passive inductance of the self-oscillator oscillatory circuit with an active inductive element based on a transistor with a phase-shifting RC circuit, which makes it possible to expand the range of output frequency adjustment, as well as to fully produce pressure sensors using microelectronic technology. Based on the consideration of physical processes in primary strain-sensing elements and self-oscillators, mathematical models of pressure sensors have been developed, on the basis of which parametric dependences of the conversion and sensitivity functions have been obtained. It is shown that the main contribution to the change in the conversion function is made by the change in pressure. This causes a change in the equivalent capacitance and negative differential resistance of the oscillatory system of sensor self-oscillators, which in turn changes the output frequency of the devices. The sensitivity of the pressure sensors varies from 0.365 kHz/kPa to 2.45 kHz/kPa when the pressure changes from 0 kPa to 2050 kPa. The obtained parametric dependences of the conversion functions of pressure sensors show the possibility of easier calculation of the main characteristics of the sensors and clearly show the influence of each parameter of the primary converters and the parameters of the self-oscillator on the output frequency of the sensors in comparison with the calculations of the conversion functions based on the Kirchhoff equations. Pressure sensors with a frequency output do not require analog-to-digital converters and amplifying devices for further processing of information signals, which reduces the cost of information-measuring equipment, in addition, it is possible to transmit information over a distance when the sensors operate at microwave frequencies.
- 26 May 2022
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 309 (3)
SELF-OSCILLATING PARAMETRIC PRESSURE SENSORS
Self-oscillating parametric pressure sensors are proposed based on transistor microelectronic structures with negative differential resistance with primary strain-sensing resistor and diode, and the primary strain-sensing elements are active elements of the self-oscillator circuit, which simplifies the design of pressure sensors. It is also proposed to replace the passive inductance of the self-oscillator oscillatory circuit with an active inductive element based on a transistor with a phase-shifting RC circuit, which makes it possible to expand the range of output frequency adjustment, as well as to fully produce pressure sensors using microelectronic technology. Based on the consideration of physical processes in primary strain-sensing elements and self-oscillators, mathematical models of pressure sensors have been developed, on the basis of which parametric dependences of the conversion and sensitivity functions have been obtained. It is shown that the main contribution to the change in the conversion function is made by the change in pressure. This causes a change in the equivalent capacitance and negative differential resistance of the oscillatory system of sensor self-oscillators, which in turn changes the output frequency of the devices. The sensitivity of the pressure sensors varies from 0.365 kHz/kPa to 2.45 kHz/kPa when the pressure changes from 0 kPa to 2050 kPa. The obtained parametric dependences of the conversion functions of pressure sensors show the possibility of easier calculation of the main characteristics of the sensors and clearly show the influence of each parameter of the primary converters and the parameters of the self-oscillator on the output frequency of the sensors in comparison with the calculations of the conversion functions based on the Kirchhoff equations. Pressure sensors with a frequency output do not require analog-to-digital converters and amplifying devices for further processing of information signals, which reduces the cost of information-measuring equipment, in addition, it is possible to transmit information over a distance when the sensors operate at microwave frequencies.
- 2 May 2022
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 307 (2)
AUTOGENERATOR PARAMETRIC SENSORS OF THE MAGNETIC FIELD WITH A HALL ELEMENT AND A TWO-COLLECTOR BIPOLAR MAGNETOTRANSISTOR
Self-oscillating parametric magnetic field sensors with a frequency output signal based on transistor structures with negative differential resistance with primary magnetically sensitive Hall elements and a bipolar two-collector magnetically sensitive transistor are proposed, moreover, the primary magnetically sensitive elements also act as active circuit elements. Magnetic field sensors with a frequency output do not require analog-to-digital converters and amplifying devices for further processing of information signals, which reduces the cost of information-measuring equipment, in addition, it is possible to transmit information over a distance when the sensors operate at microwave frequencies. Based on the analysis of physical processes in primary magnetically sensitive elements and self-oscillators, mathematical models of sensors were developed, on the basis of which parametric dependences of the conversion and sensitivity functions were obtained. The obtained functions clearly show the influence of each element of the primary magnetic converters and self-oscillator elements on the output frequency of the sensors in comparison with the calculations of the conversion functions from equivalent device circuits based on the Kirchhoff solution equations. It is shown that the main contribution to the conversion functions is made by a change in the magnetic induction, which causes a change in the negative differential resistance and the equivalent capacitance of the oscillatory circuit of the self-oscillator, which in turn changes the output frequency of the magnetic field sensors. Self-oscillating parametric magnetic field sensors with a frequency output signal can significantly improve the accuracy and sensitivity of measuring magnetic induction, abandon analog-to-digital converters and amplifying devices in the further processing of information signals, they also allow transmitting initial information over a distance when operating at microwave frequencies. The sensitivity of the magnetic field sensors varies from 1.45 kHz/mT to 11.95 kHz/mT when the magnetic induction changes from 0.1 to 120 mT.
- 2 May 2022
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 307 (2)
AUTOGENERATOR PARAMETRIC SENSORS OF THE MAGNETIC FIELD WITH A HALL ELEMENT AND A TWO-COLLECTOR BIPOLAR MAGNETOTRANSISTOR
Self-oscillating parametric magnetic field sensors with a frequency output signal based on transistor structures with negative differential resistance with primary magnetically sensitive Hall elements and a bipolar two-collector magnetically sensitive transistor are proposed, moreover, the primary magnetically sensitive elements also act as active circuit elements. Magnetic field sensors with a frequency output do not require analog-to-digital converters and amplifying devices for further processing of information signals, which reduces the cost of information-measuring equipment, in addition, it is possible to transmit information over a distance when the sensors operate at microwave frequencies. Based on the analysis of physical processes in primary magnetically sensitive elements and self-oscillators, mathematical models of sensors were developed, on the basis of which parametric dependences of the conversion and sensitivity functions were obtained. The obtained functions clearly show the influence of each element of the primary magnetic converters and self-oscillator elements on the output frequency of the sensors in comparison with the calculations of the conversion functions from equivalent device circuits based on the Kirchhoff solution equations. It is shown that the main contribution to the conversion functions is made by a change in the magnetic induction, which causes a change in the negative differential resistance and the equivalent capacitance of the oscillatory circuit of the self-oscillator, which in turn changes the output frequency of the magnetic field sensors. Self-oscillating parametric magnetic field sensors with a frequency output signal can significantly improve the accuracy and sensitivity of measuring magnetic induction, abandon analog-to-digital converters and amplifying devices in the further processing of information signals, they also allow transmitting initial information over a distance when operating at microwave frequencies. The sensitivity of the magnetic field sensors varies from 1.45 kHz/mT to 11.95 kHz/mT when the magnetic induction changes from 0.1 to 120 mT.
- 23 February 2022
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 305 (1)
RESEARCH OF AUTOGENERATOR PARAMETRIC TEMPERATURE SENSORS
Autogenerator parametric temperature sensors based on transistor microelectronic structures with negative differential resistance with primary transducers such as thermistors and thermodiodes are proposed, and the primary thermosensitive elements are active elements of sensor autogenerator circuits, which simplifies their design. Based on the consideration of physical processes in primary heat-sensitive transducers and autogenerators of sensors, mathematical models of temperature sensors have been developed, on the basis of which parametric dependences of transformation and sensitivity functions are obtained. It is shown that the main contribution to the conversion function is made by temperature. This causes a change in the equivalent capacitance and negative differential resistance of the sensor autogenerators, which in turn changes the output frequency of the temperature sensors. The sensitivity of the temperature sensors varies from 1.2 kHz/0C to 2.35 kHz/0C when the temperature changes from 0 0C to 125 0C. The obtained parametric dependences of temperature sensor conversion functions show the possibility to obtain basic sensor characteristics much easier and clearly demonstrate the influence of each parameter of primary converters and autogenerator elements on sensor output frequency in comparison with calculations of conversion functions from equivalent device circuits based on Kirchhoff equations solution. Frequency output temperature sensors do not require analog-to-digital converters and amplifiers for further processing of information signals, which reduces the cost of information and measuring equipment, in addition, it is possible to transmit information over distances when operating sensors at ultrahigh frequencies.
- 23 February 2022
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 305 (1)
RESEARCH OF AUTOGENERATOR PARAMETRIC TEMPERATURE SENSORS
Autogenerator parametric temperature sensors based on transistor microelectronic structures with negative differential resistance with primary transducers such as thermistors and thermodiodes are proposed, and the primary thermosensitive elements are active elements of sensor autogenerator circuits, which simplifies their design. Based on the consideration of physical processes in primary heat-sensitive transducers and autogenerators of sensors, mathematical models of temperature sensors have been developed, on the basis of which parametric dependences of transformation and sensitivity functions are obtained. It is shown that the main contribution to the conversion function is made by temperature. This causes a change in the equivalent capacitance and negative differential resistance of the sensor autogenerators, which in turn changes the output frequency of the temperature sensors. The sensitivity of the temperature sensors varies from 1.2 kHz/0C to 2.35 kHz/0C when the temperature changes from 0 0C to 125 0C. The obtained parametric dependences of temperature sensor conversion functions show the possibility to obtain basic sensor characteristics much easier and clearly demonstrate the influence of each parameter of primary converters and autogenerator elements on sensor output frequency in comparison with calculations of conversion functions from equivalent device circuits based on Kirchhoff equations solution. Frequency output temperature sensors do not require analog-to-digital converters and amplifiers for further processing of information signals, which reduces the cost of information and measuring equipment, in addition, it is possible to transmit information over distances when operating sensors at ultrahigh frequencies.
- Open Access
- 20 December 2020
- Published by Politechnika Lubelska in Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
- Vol. 10 (4) , 51-56
RESEARCH ON A MAGNETIC FIELD SENSOR WITH A FREQUENCY OUTPUT SIGNAL BASED ON A TUNNEL-RESONANCE DIODE
Based on the consideration of physical processes in a tunnel-resonant diode under the action of a magnetic field, the construction of an autogenerating magnetic field sensor with a frequency output signal is proposed. The use of devices with negative differential resistance makes it possible to significantly simplify the design of magnetic field sensors in the entire RF frequency range. Depending on the operating modes of the sensor, an output signal can be obtained in the form of harmonic oscillations, as well as in the form of pulse oscillations of a special form. The study of the characteristics of the magnetic field sensor is based on the complete equivalent circuit of the tunnel-resonant diode. The equivalent circuit takes into account both the capacitive and inductive properties of the tunneling resonant diode. The inductive component exists under any operating conditions, as a result of the fact that the current flowing through the device is always lagging behind the voltage that caused it, which corresponds to the inductive response of a tunnel-resonant diode.
- 20 December 2020
- Published by Politechnika Lubelska in Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
- Vol. 10 (4) , 51-56
Open AccessRESEARCH ON A MAGNETIC FIELD SENSOR WITH A FREQUENCY OUTPUT SIGNAL BASED ON A TUNNEL-RESONANCE DIODE
Based on the consideration of physical processes in a tunnel-resonant diode under the action of a magnetic field, the construction of an autogenerating magnetic field sensor with a frequency output signal is proposed. The use of devices with negative differential resistance makes it possible to significantly simplify the design of magnetic field sensors in the entire RF frequency range. Depending on the operating modes of the sensor, an output signal can be obtained in the form of harmonic oscillations, as well as in the form of pulse oscillations of a special form. The study of the characteristics of the magnetic field sensor is based on the complete equivalent circuit of the tunnel-resonant diode. The equivalent circuit takes into account both the capacitive and inductive properties of the tunneling resonant diode. The inductive component exists under any operating conditions, as a result of the fact that the current flowing through the device is always lagging behind the voltage that caused it, which corresponds to the inductive response of a tunnel-resonant diode.
- 1 October 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10808, 177
Microelectronic frequency transducers of magnetic field with Hall elements
The analysis is carried out and the possibility of creation of microelectronic auto generator transducers of magnetic field on the basis of transistor structures with a negative resistance is shown. Characteristics of microelectronic auto generator transducers of magnetic field with Hall's elements with the broad range of frequencies from 103 to 107 Hz are offered and investigated, at the same time the sensitivity of devices changes from 103 kHz/mT up to 105 kHz/mT.
- 1 October 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10808, 177
Microelectronic frequency transducers of magnetic field with Hall elements
The analysis is carried out and the possibility of creation of microelectronic auto generator transducers of magnetic field on the basis of transistor structures with a negative resistance is shown. Characteristics of microelectronic auto generator transducers of magnetic field with Hall's elements with the broad range of frequencies from 103 to 107 Hz are offered and investigated, at the same time the sensitivity of devices changes from 103 kHz/mT up to 105 kHz/mT.