SFSebastian O. Furer

Sebastian O. Furer

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sebastian O. Furer has a total of 91 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The Promise and Challenges of Ammonia Electrosynthesis From Dinitrogen and Water Using an Electrochemical Palladium Membrane

    by Ngoc‐Trung Nguyen, Dinh‐Duong Pham, Duong T. H. Truong, Dijon A. Hoogeveen, Mazin Al‐Alawi, Thi Mung Vu, Koustav Banerjee, Sebastian O. Fürer, Peter Strasser, Hoang‐Long Du, et al.

    Sustainable ammonia production can be achieved via an electrochemical process coupling the lithium redox‐mediated nitrogen reduction (Li‐NRR) with hydrogen oxidation, but a more practical approach uses water oxidation (the oxygen evolution reaction; OER) as the anode reaction. However, coupling the Li‐NRR and the OER is restricted by incompatibility of the anhydrous conditions required for nitrogen reduction with water. Aiming to resolve this, we investigated an electrolyser with an electrochemical palladium‐based membrane, which transforms protons generated by the OER to palladium hydride in aqueous media and releases protons into non‐aqueous Li‐NRR media to sustain ammonia production. The hydride formation/oxidation mechanism, validated through experiments with deuterated water, ensures exclusive membrane selectivity to protons, and is facilitated by the palladium‐gold electrocatalysts. We demonstrate ammonia electrosynthesis from nitrogen (15 bar) and water at a faradaic efficiency of 59 ± 4%, yield rate of 20 ± 1 nmol s −1 cm −2 and energy efficiency of 9.0 ± 0.7% over more than two days. However, deeper investigation of the system revealed ammonia‐promoted corrosion of the palladium‐based membrane—a challenge that needs to be addressed in the future developments of this technology.

  • Open Access

    The Promise and Challenges of Ammonia Electrosynthesis From Dinitrogen and Water Using an Electrochemical Palladium Membrane

    by Ngoc‐Trung Nguyen, Dinh‐Duong Pham, Duong T. H. Truong, Dijon A. Hoogeveen, Mazin Al‐Alawi, Thi Mung Vu, Koustav Banerjee, Sebastian O. Fürer, Peter Strasser, Hoang‐Long Du, et al.

    Sustainable ammonia production can be achieved via an electrochemical process coupling the lithium redox‐mediated nitrogen reduction (Li‐NRR) with hydrogen oxidation, but a more practical approach uses water oxidation (the oxygen evolution reaction; OER) as the anode reaction. However, coupling the Li‐NRR and the OER is restricted by incompatibility of the anhydrous conditions required for nitrogen reduction with water. Aiming to resolve this, we investigated an electrolyser with an electrochemical palladium‐based membrane, which transforms protons generated by the OER to palladium hydride in aqueous media and releases protons into non‐aqueous Li‐NRR media to sustain ammonia production. The hydride formation/oxidation mechanism, validated through experiments with deuterated water, ensures exclusive membrane selectivity to protons, and is facilitated by the palladium‐gold electrocatalysts. We demonstrate ammonia electrosynthesis from nitrogen (15 bar) and water at a faradaic efficiency of 59 ± 4%, yield rate of 20 ± 1 nmol s −1 cm −2 and energy efficiency of 9.0 ± 0.7% over more than two days. However, deeper investigation of the system revealed ammonia‐promoted corrosion of the palladium‐based membrane—a challenge that needs to be addressed in the future developments of this technology.

  • Enhanced Carrier Mobility and Diffusion Length in Formamidinium-Rich Hybrid Perovskites: Effects of Grain-Size and Electron–Phonon Coupling

    by Mitko Oldfield, Gary Beane, Sebastian Fürer, Tan-Phat Nguyen, Philippe Holzhey, Boer Tan, Wenxin Mao, Henry Snaith, Udo Bach, Agustin Schiffrin

    Carrier mobility, recombination rates and diffusion length directly govern the efficiency of hybrid lead-halide perovskites. Yet, their behavior across different carrier concentrations and the effects of microstructure remain poorly understood. Using time-resolved photoluminescence and optical pump-THz probe spectroscopy, we quantify mobility, carrier recombination rates and diffusion length for polycrystalline films of methylammonium (MA)- and formamidinium (FA)-rich lead-halide perovskites, across carrier concentrations ranging from ∼1015 to ∼1019 cm-3. For example, at a carrier concentration of ∼1018 cm-3, FA0.95MA0.05Pb(I0.95Br0.05)3 exhibits a mobility of 127 ± 9 cm2 V-1 s-1 and a diffusion length of 392 ± 85 nm, compared to 69 ± 1 cm2 V-1 s-1 and 139 ± 1 nm for MAPbI3. These differences in mobility and diffusion length persist across different fluences, and are captured by a fluence-dependent rate model that accounts for both carrier generation and recombination at different material depths. From scanning electron microscopy and THz time-domain spectroscopy measurements, we attribute the increased mobility and diffusion length for the FA-rich perovskite mainly to a larger average grain size, after considering possible Fröhlich-type interactions between carriers and THz-active phonon modes. Our work establishes a mechanistic link between material microstructure and ultrafast carrier dynamics, informing crucial design principles for perovskite-based photovoltaic and optoelectronic applications.


  • Open Access

    Intermediate-Phase Engineering via Dimethylammonium Cation Additive for Stable Perovskite Solar Cells

    by David P. McMeekin, Philippe Holzhey, Sebastian O. Fürer, Steven P. Harvey, Laura T. Schelhas, James M. Ball, Suhas Mahesh, Seongrok Seo, Nicholas Hawkins, Jianfeng Lu, et al.

    Achieving the long-term stability of perovskite solar cells is arguably the most critical challenge to enabling their widespread commercialization. Understanding the perovskite crystallization process and its direct impact on device stability is essential to achieve this goal. Surprisingly, we find that intermediate phases that occur during the crystallization process strongly influence the long-term perovskite device stability. The commonly employed dimethyl formamide/dimethyl sulfoxide (DMF/DMSO) solvent system preparation method results in poor crystal quality and microstructure of the polycrystalline perovskite films. In this work, we introduce a high-temperature DMSO-free processing method that utilizes dimethylammonium chloride (DMACl) as an additive to control the perovskite intermediate precursor phases accurately. By precisely controlling the 2H to 3C perovskite phase crystallization sequence, we tune the grain size, texturing, orientation (corner-up vs face-up), and crystallinity of the formamidinium (FA)yCs1-yPb(IxBr1-x)3 perovskite system. Encapsulated devices show significantly improved operational stability, with a champion device showing a T80 of 490 hours under simulated sunlight at 85 °C in air, under open circuit conditions. Our work introduces a new processing method that allows higher overall perovskite device stability by controlling the intermediate phase domains during the perovskite formation. This work highlights the importance of material quality to achieve long-term operational stability of perovskite optoelectronic devices.

  • Naphthalene-imide Self-assembled Monolayers as a Surface Modification of ITO for Improved Thermal Stability of Perovskite Solar Cells

    by Sebastian O. Fürer, Kevin J. Rietwyk, Federico Pulvirenti, David P. McMeekin, Maciej Adam Surmiak, Sonia R. Raga, Wenxin Mao, Xiongfeng Lin, Yvonne Hora, Jian Wang, et al.


  • Efficient and stable formamidinium–caesium perovskite solar cells and modules from lead acetate-based precursors

    by Jie Zhao, Sebastian O. Fürer, David P. McMeekin, Qingdong Lin, Pin Lv, Jisheng Ma, Wen Liang Tan, Chao Wang, Boer Tan, Anthony S. R. Chesman, et al.

    Controlling the crystallization process of perovskite thin films to obtain a high-quality material is one of the most challenging aspects for upscaling perovskite solar cell (PSC) technology. The use of non-halide lead sources, such as lead acetate, is a potential solution to this issue due to the fast perovskite crystallization process triggered by the facile removal of acetate during post-annealing. However, to date, lead acetate has been used exclusively as a precursor for the synthesis of methylammonium (MA) or caesium (Cs) based perovskites, which are unstable and less efficient. Here, we expand the lead acetate precursor route to form mixed A-cation perovskites, namely, formamidinium–caesium lead perovskite. High-quality large-area formamidinium–caesium mixed-cation perovskite films were produced by blade-coating a lead acetate-based precursor formulation in an ambient laboratory environment, with the use of NH4 + as a volatile cation to drive off acetate during annealing, leading to formation of PSCs with a power conversion efficiency (PCE) of up to 21.0%. Blade coated mini-modules with an aperture area of 10 cm2 displayed PCEs of up to 18.8%. The encapsulated PSCs showed excellent thermal stability, with no evidence of efficiency loss after 3300 hours at 65 °C.


  • Top Cited Papers

    Intermediate-phase engineering via dimethylammonium cation additive for stable perovskite solar cells

    by David P. McMeekin, Philippe Holzhey, Sebastian O. Fürer, Steven P. Harvey, Laura T. Schelhas, James M. Ball, Suhas Mahesh, Seongrok Seo, Nicholas Hawkins, Jianfeng Lu, et al.


  • A naphthalene diimide side-chain polymer as an electron-extraction layer for stable perovskite solar cells

    by Khaled Al Kurdi, Declan P. McCarthy, David P. McMeekin, Sebastian O. Furer, Marie-Hélène Tremblay, Stephen Barlow, Udo Bach, Seth R. Marder

    Poly(N-(5-(5-norbornene-2-carbonyl)oxy)pentyl)-N′-n-hexyl-naphthalene-1,8:4,5-bis(dicarboximide) has been synthesized by esterification of (N-(5-hydroxypentyl)-N′-n-hexyl-naphthalene-1,8:4,5-bis(dicarboximide)) with exo-5-norbornene-2-carboxylic acid, and has been polymerized using the first-generation Grubbs initiator. This side-chain polymer exhibits good transparency throughout the visible (absorption onset at ca. 400 nm), good solubility in common low- and medium-polarity organic solvents, good resistance to dimethylformamide, and appropriate electron affinity for use as an electron-extraction layer in lead-halide perovskite solar cells. The performance of this polymer in n-i-p perovskite solar cells was compared to that of several small-molecule naphthalene-1,8:4,5-bis(dicarboximide) derivatives and of SnO2. Solar cells using the polymer exhibited open-circuit voltages of up to 1.02 V, short-circuit currents of over 21 mA cm−2, and power conversion efficiencies (PCE) reaching 14% which stabilize at 13.8% upon 90 s of illumination. Meanwhile control SnO2 devices exhibited a PCE of ca. 16%, and small-molecule devices gave PCE values of less than 10%. The devices employing the polymer exhibited improved long-term stability relative to the SnO2 control devices under continuous illumination.


  • The Performance‐Determining Role of Lewis Bases in Dye‐Sensitized Solar Cells Employing Copper‐Bisphenanthroline Redox Mediators

    by Sebastian O. Fürer, Rebecca A. Milhuisen, Muhammad K. Kashif, Sonia R. Raga, Shravan S. Acharya, Craig Forsyth, Maning Liu, Laszlo Frazer, Noel W. Duffy, C. André Ohlin, et al.

    Copper redox mediators have enabled open‐circuit voltages (VOC) of over 1.0 V in dye‐sensitized solar cells (DSCs) and have helped to establish DSCs as the most promising solar cell technology in low‐light conditions. The addition of additives such as 4‐tert‐butylpyridine (tBP) to these electrolytes has helped in achieving high solar cell performances. However, emerging evidence suggests that tBP coordinates to the Cu(II) species and limits the performance of these electrolytes. To date, the implications of this coordination are poorly understood. Here, the importance of Lewis base additives for the successful implementation of copper complexes as redox mediators in DSCs is demonstrated. Two redox couples, [Cu(dmp)2]+/2+ and [Cu(dpp)2]+/2+ (with dmp = 2,9‐dimethyl‐1,10‐phenanthroline and dpp = 2,9‐diphenyl‐1,10‐phenanthroline) in combination with three different Lewis bases, TFMP (4‐(trifluoromethyl)pyridine), tBP, and NMBI (1‐methyl‐benzimidazole), are considered. Through single‐crystal X‐ray diffraction analysis, absorption, and 1H‐NMR spectroscopies, the coordination of Lewis bases to the Cu(II) centers are studied. This coordination efficiently suppresses recombination losses and is crucial for high performing solar cells. If, however, the coordination involves a ligand exchange, as is the case for [Cu(dpp)2]+/2+, the redox mediator regeneration at the counter electrode is significantly retarded and the solar cells show current limitations.


  • LiTFSI‐Free Spiro‐OMeTAD‐Based Perovskite Solar Cells with Power Conversion Efficiencies Exceeding 19%

    by Boer Tan, Sonia R. Raga, Anthony S. R. Chesman, Sebastian O. Fürer, Fei Zheng, David P. McMeekin, Liangcong Jiang, Wenxin Mao, Xiongfeng Lin, Xiaoming Wen, et al.

    To date, the most efficient perovskite solar cells (PSCs) employ an n–i–p device architecture that uses a 2,2′,7,7′‐tetrakis(N,N‐di‐p‐methoxyphenyl‐amine)‐9,9′‐spirobifluorene (spiro‐OMeTAD) hole‐transporting material (HTM), which achieves optimum conductivity with the addition of lithium bis(trifluoromethane)sulfonimide (LiTFSI) and air exposure. However, this additive along with its oxidation process leads to poor reproducibility and is detrimental to stability. Herein, a dicationic salt spiro‐OMeTAD(TFSI)2, is employed as an effective p‐dopant to achieve power conversion efficiencies of 19.3% and 18.3% (apertures of 0.16 and 1.00 cm2) with excellent reproducibility in the absence of LiTFSI and air exposure. As far as it is known, these are the highest‐performing n–i–p PSCs without LiTFSI or air exposure. Comprehensive analysis demonstrates that precise control of the proportion of [spiro‐OMeTAD]+ directly provides high conductivity in HTM films with low series resistance, fast hole extraction, and lower interfacial charge recombination. Moreover, the spiro‐OMeTAD(TFSI)2‐doped devices show improved stability, benefitting from well‐retained HTM morphology without forming aggregates or voids when tested under an ambient atmosphere. A facile approach is presented to fabricate highly efficient PSCs by replacing LiTFSI with spiro‐OMeTAD(TFSI)2. Furthermore, this study provides an insight into the relationship between device performance and the HTM doping level.