Sourav Kumar Bagchi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sourav Kumar Bagchi has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Nirupama Mallick
Agricultural and Food Engineering Department, Indian Institute of Technology Kharagpur, Kharagpur, India
8 shared publications Shankha Koley
5 shared publicationsReeza Patnaik
4 shared publicationsSashi Sonkar
3 shared publicationsPavuluri Srinivasa Rao
Agricultural and Food Engineering Department, Indian Institute of Technology Kharagpur, Kharagpur, India
2 shared publications- Akhilesh Kumar Singh
Mahatma Gandhi Central University
1 shared publication
Latest Publications
- Open Access
- 19 December 2023
- Published by Elsevier in Renewable Energy
- Vol. 222
Beneficiation of paper-pulp industrial wastewater for improved outdoor biomass cultivation and biodiesel production using Tetradesmus obliquus (Turpin) Kützing
- 19 December 2023
- Published by Elsevier in Renewable Energy
- Vol. 222
Open AccessBeneficiation of paper-pulp industrial wastewater for improved outdoor biomass cultivation and biodiesel production using Tetradesmus obliquus (Turpin) Kützing
- Open Access
- 18 September 2019
- Published by Frontiers Media SA in Frontiers in Microbiology
- Vol. 10, 2114
Utilization of Scenedesmus obliquus Protein as a Replacement of the Commercially Available Fish Meal Under an Algal Refinery Approach
The approach of algal refinery as a method to reduce the cost of algal biodiesel by co-production of various value-added chemicals is the most up-coming strategy suggested for the economic viability of microalgal biodiesel. This concept being relatively new and novel, abundant literature on the subject is not available although fragmented data on some feedstocks are present. The main objective of this research paper is to propose an algal refinery design through utilization of Scenedesmus obliquus biomass for production of various industrially important products. For this purpose, first a protocol was standardized for maximum extraction of protein from S. obliquus biomass. Then, different experiments were conducted for 90 days each to find out the optimum concentration of microalgal protein that can be substituted in the diets of freshwater fishes for their maximum growth. During these experiments eight different growth parameters and seven water quality parameters were tested. Results showed that the standard + whole microalgal biomass + extracted microalgal protein diet (25:25:50) was the best diet for maximum growth of the freshwater fishes. After conducting these experiments, a detailed sequential extraction process for maximum valorization of the S. obliquus biomass or in other words an algal refinery was designed. The detailed sequential process developed, yielded 0.06 g of β-carotene, 10 g of protein, 38 g (43 mL) of biodiesel, 2 g of omega-3 fatty acid, 3 g (2.4 mL) of glycerol and 18 g (23 mL) of bioethanol from 1 Kg wet (≈100 g dry) S. obliquus biomass thus converting 70% of the test microalgal biomass into biodiesel and other value-added products by using an algal refinery approach.
- 18 September 2019
- Published by Frontiers Media SA in Frontiers in Microbiology
- Vol. 10, 2114
Open AccessUtilization of Scenedesmus obliquus Protein as a Replacement of the Commercially Available Fish Meal Under an Algal Refinery Approach
The approach of algal refinery as a method to reduce the cost of algal biodiesel by co-production of various value-added chemicals is the most up-coming strategy suggested for the economic viability of microalgal biodiesel. This concept being relatively new and novel, abundant literature on the subject is not available although fragmented data on some feedstocks are present. The main objective of this research paper is to propose an algal refinery design through utilization of Scenedesmus obliquus biomass for production of various industrially important products. For this purpose, first a protocol was standardized for maximum extraction of protein from S. obliquus biomass. Then, different experiments were conducted for 90 days each to find out the optimum concentration of microalgal protein that can be substituted in the diets of freshwater fishes for their maximum growth. During these experiments eight different growth parameters and seven water quality parameters were tested. Results showed that the standard + whole microalgal biomass + extracted microalgal protein diet (25:25:50) was the best diet for maximum growth of the freshwater fishes. After conducting these experiments, a detailed sequential extraction process for maximum valorization of the S. obliquus biomass or in other words an algal refinery was designed. The detailed sequential process developed, yielded 0.06 g of β-carotene, 10 g of protein, 38 g (43 mL) of biodiesel, 2 g of omega-3 fatty acid, 3 g (2.4 mL) of glycerol and 18 g (23 mL) of bioethanol from 1 Kg wet (≈100 g dry) S. obliquus biomass thus converting 70% of the test microalgal biomass into biodiesel and other value-added products by using an algal refinery approach.
- 1 August 2019
- Published by Elsevier in Renewable Energy
- Vol. 139, 976-987
Qualitative biodiesel production from a locally isolated chlorophycean microalga Scenedesmus obliquus (Turpin) Kützing GA 45 under closed raceway pond cultivation
- 1 August 2019
- Published by Elsevier in Renewable Energy
- Vol. 139, 976-987
Qualitative biodiesel production from a locally isolated chlorophycean microalga Scenedesmus obliquus (Turpin) Kützing GA 45 under closed raceway pond cultivation
- Open Access
- 23 January 2017
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 7 (12) , 7227-7237
Development of a harvesting technique for large-scale microalgal harvesting for biodiesel production
Harvesting imposes a major constraint in microalgal downstream processes and cost-effective production of various high value products. In this study, different harvesting techniques were assessed under a single domain to identify the most suitable one for large-scale harvesting of green microalgae for biodiesel purpose. In the laboratory, Scenedesmus obliquus showed a flocculation efficiency of 83.2% at pH 12 after 1 h. Maximum flocculation efficiencies of 80.2, 95 and 91%, respectively were observed for FeCl3 at 200 mg L−1, alum at 250 mg L−1 and chitosan at 20 mg L−1 after 1 h. Electro-flotation at 24 V and dissolved air flotation with 1 mg L−1 of alum also revealed flocculation efficiencies of 99 and 91% respectively, after 1 h. For Chlorella vulgaris, similar trends were also observed. Under field trials with 1000 L algal suspension, electro-flotation required a voltage of 60 V to achieve a flocculation efficiency of ∼90% after 24 h. Dissolved air flotation also showed a flocculation efficiency of same magnitude after 7 h, but with 10 mg L−1 of alum. Thus electro-flotation required a profoundly higher voltage with increasing culture volume, whereas for dissolved air flotation a much higher concentration of alum was entailed. Both the processes also depicted a significantly longer time period to achieve the required flocculation efficiency. On the other hand, pH-induced flocculation was found to be the most pertinent one for large-scale set-ups, and emerged to be efficient, cost-effective and eco-friendly as the supernatant can be reused as growth medium by re-supplementing the nutrients and adjusting the pH.
- 23 January 2017
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 7 (12) , 7227-7237
Open AccessDevelopment of a harvesting technique for large-scale microalgal harvesting for biodiesel production
Harvesting imposes a major constraint in microalgal downstream processes and cost-effective production of various high value products. In this study, different harvesting techniques were assessed under a single domain to identify the most suitable one for large-scale harvesting of green microalgae for biodiesel purpose. In the laboratory, Scenedesmus obliquus showed a flocculation efficiency of 83.2% at pH 12 after 1 h. Maximum flocculation efficiencies of 80.2, 95 and 91%, respectively were observed for FeCl3 at 200 mg L−1, alum at 250 mg L−1 and chitosan at 20 mg L−1 after 1 h. Electro-flotation at 24 V and dissolved air flotation with 1 mg L−1 of alum also revealed flocculation efficiencies of 99 and 91% respectively, after 1 h. For Chlorella vulgaris, similar trends were also observed. Under field trials with 1000 L algal suspension, electro-flotation required a voltage of 60 V to achieve a flocculation efficiency of ∼90% after 24 h. Dissolved air flotation also showed a flocculation efficiency of same magnitude after 7 h, but with 10 mg L−1 of alum. Thus electro-flotation required a profoundly higher voltage with increasing culture volume, whereas for dissolved air flotation a much higher concentration of alum was entailed. Both the processes also depicted a significantly longer time period to achieve the required flocculation efficiency. On the other hand, pH-induced flocculation was found to be the most pertinent one for large-scale set-ups, and emerged to be efficient, cost-effective and eco-friendly as the supernatant can be reused as growth medium by re-supplementing the nutrients and adjusting the pH.
- Open Access
- 30 June 2016
- Published by Frontiers Media SA in Frontiers in Microbiology
- Vol. 7, 1019
Progress and Challenges in Microalgal Biodiesel Production
The last decade has witnessed a tremendous impetus on biofuel research due to the irreversible diminution of fossil fuel reserves for enormous demands of transportation vis-a-vis escalating emissions of green house gasses (GHGs) into the atmosphere. With an imperative need of CO2 reduction and considering the declining status of crude oil, governments in various countries have not only diverted substantial funds for biofuel projects but also have introduced incentives to vendors that produce biofuels. Currently, biodiesel production from microalgal biomass has drawn an immense importance with the potential to exclude high-quality agricultural land use and food safe-keeping issues. Moreover, microalgae can grow in seawater or wastewater and microalgal oil can exceed 50-60% (dry cell weight) as compared with some best agricultural oil crops of only 5-10% oil content. Globally, microalgae are the highest biomass producers and neutral lipid accumulators contending any other terrestrial oil crops. However, there remain many hurdles in each and every step, starting from strain selection and lipid accumulation/ yield, algae mass cultivation followed by the downstream processes such as harvesting, drying, oil extraction and biodiesel conversion (transesterification), and overall, the cost of production. Isolation and screening of oleaginous microalgae is one pivotal important upstream factor which should be addressed according to the need of freshwater or marine algae with a consideration that wild-type indigenous isolate can be the best suited for the laboratory to large scale exploitation. Nowadays, a large number of literature on microalgal biodiesel production are available, but none of those illustrate a detailed step-wise description with the pros and cons of the upstream and downstream processes of biodiesel production from microalgae. Specifically, harvesting and drying constitute more than 50% of the total production costs; however, there are quite a less number of detailed study reports available. In this review, a pragmatic and critical analysis was tried to put forward with the on-going researches on isolation and screening of oleaginous microalgae, microalgal large scale cultivation, biomass harvesting, drying, lipid extraction and finally biodiesel production.
- 30 June 2016
- Published by Frontiers Media SA in Frontiers in Microbiology
- Vol. 7, 1019
Open AccessProgress and Challenges in Microalgal Biodiesel Production
The last decade has witnessed a tremendous impetus on biofuel research due to the irreversible diminution of fossil fuel reserves for enormous demands of transportation vis-a-vis escalating emissions of green house gasses (GHGs) into the atmosphere. With an imperative need of CO2 reduction and considering the declining status of crude oil, governments in various countries have not only diverted substantial funds for biofuel projects but also have introduced incentives to vendors that produce biofuels. Currently, biodiesel production from microalgal biomass has drawn an immense importance with the potential to exclude high-quality agricultural land use and food safe-keeping issues. Moreover, microalgae can grow in seawater or wastewater and microalgal oil can exceed 50-60% (dry cell weight) as compared with some best agricultural oil crops of only 5-10% oil content. Globally, microalgae are the highest biomass producers and neutral lipid accumulators contending any other terrestrial oil crops. However, there remain many hurdles in each and every step, starting from strain selection and lipid accumulation/ yield, algae mass cultivation followed by the downstream processes such as harvesting, drying, oil extraction and biodiesel conversion (transesterification), and overall, the cost of production. Isolation and screening of oleaginous microalgae is one pivotal important upstream factor which should be addressed according to the need of freshwater or marine algae with a consideration that wild-type indigenous isolate can be the best suited for the laboratory to large scale exploitation. Nowadays, a large number of literature on microalgal biodiesel production are available, but none of those illustrate a detailed step-wise description with the pros and cons of the upstream and downstream processes of biodiesel production from microalgae. Specifically, harvesting and drying constitute more than 50% of the total production costs; however, there are quite a less number of detailed study reports available. In this review, a pragmatic and critical analysis was tried to put forward with the on-going researches on isolation and screening of oleaginous microalgae, microalgal large scale cultivation, biomass harvesting, drying, lipid extraction and finally biodiesel production.
- 8 March 2016
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 6 (36) , 29889-29898
Carbon dioxide biofixation and lipid accumulation potential of an indigenous microalga Scenedesmus obliquus (Turpin) Kützing GA 45 for biodiesel production
A strategy demonstrating the higher potential of Scenedesmus obliquus for CO 2 biofixation and biodiesel production under mixotrophy with biphasic nitrogen starvation.
- 8 March 2016
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 6 (36) , 29889-29898
Carbon dioxide biofixation and lipid accumulation potential of an indigenous microalga Scenedesmus obliquus (Turpin) Kützing GA 45 for biodiesel production
A strategy demonstrating the higher potential of Scenedesmus obliquus for CO 2 biofixation and biodiesel production under mixotrophy with biphasic nitrogen starvation.
- 1 March 2015
- Published by Elsevier in Bioresource Technology
- Vol. 180, 207-213
Development of an oven drying protocol to improve biodiesel production for an indigenous chlorophycean microalga Scenedesmus sp.
- 1 March 2015
- Published by Elsevier in Bioresource Technology
- Vol. 180, 207-213
Development of an oven drying protocol to improve biodiesel production for an indigenous chlorophycean microalga Scenedesmus sp.
- 5 July 2013
- Published by Taylor & Francis in Environmental Technology
- Vol. 34 (13-14) , 1887-1894
Effects of calcium, magnesium and sodium chloride in enhancing lipid accumulation in two green microalgae
Biodiesel from microalgae has the potential as a sustainable fuel, since some species show exceptionally high lipid accumulation potential under various stresses. Effects of different concentrations of Ca, Mg and NaCl in the growth medium on biomass yield and lipid accumulation of Chlorella vulgaris and Scenedesmus obliquus grown under batch culture mode were investigated. Starvation of Mg showed a marginal rise in lipid content for a short period of time. Ca-starved cultures, however, demonstrated a profound rise in lipid content, i.e. 40% of dry cell wt. (dcw) was recorded against 11.9% control for C. vulgaris and 37% (dcw) against 11.3% for S. obliquus. Under increased concentration of Mg, significant rise in biomass and lipid yield was recorded. Effect of NaCl-induced osmotic stress showed lipid accumulation of ∼ 40% (dcw) in both the test algae, whereas the biomass yield was severely affected. The fatty acid profiles under the above stresses were analysed and discussed.
- 5 July 2013
- Published by Taylor & Francis in Environmental Technology
- Vol. 34 (13-14) , 1887-1894
Effects of calcium, magnesium and sodium chloride in enhancing lipid accumulation in two green microalgae
Biodiesel from microalgae has the potential as a sustainable fuel, since some species show exceptionally high lipid accumulation potential under various stresses. Effects of different concentrations of Ca, Mg and NaCl in the growth medium on biomass yield and lipid accumulation of Chlorella vulgaris and Scenedesmus obliquus grown under batch culture mode were investigated. Starvation of Mg showed a marginal rise in lipid content for a short period of time. Ca-starved cultures, however, demonstrated a profound rise in lipid content, i.e. 40% of dry cell wt. (dcw) was recorded against 11.9% control for C. vulgaris and 37% (dcw) against 11.3% for S. obliquus. Under increased concentration of Mg, significant rise in biomass and lipid yield was recorded. Effect of NaCl-induced osmotic stress showed lipid accumulation of ∼ 40% (dcw) in both the test algae, whereas the biomass yield was severely affected. The fatty acid profiles under the above stresses were analysed and discussed.