Rahma Fitriani
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Rahma Fitriani has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
- Eni Sumarminingsih
Department of Statistics, Universitas Brawijaya, Malang, Indonesia
6 shared publications Eni Sumarminingsih
3 shared publicationsHerman Cahyo Diartho
3 shared publications- Naufal Shela Abdila
Department of Statistics, Universitas Brawijaya, Malang, Indonesia
3 shared publications - Zerlita Fahdha Pusdiktasari
University of Brawijaya, Malang, Indonesia
3 shared publications Herman C. Diartho
Univ Jember, Jember, Indonesia
2 shared publications
Latest Publications
- Open Access
- 29 October 2026
- Published by Lembaga Publikasi Ilmiah Nusantara in ECOMA: Journal of Economics and Management
- Vol. 4 (4) , 1304-1325
Regional Patterns of the Socio-Economic Base of Malang City's Creative Economy: A Spatio-Temporal Clustering Analysis
The creative economy is important for Malang City, but official statistics do not report creative activity at the sub-district level. This study therefore examines the socio-economic base of the creative economy, that is, the local conditions associated with creative activity, and how it differs across the five sub-districts of Malang City over 2022–2025. Eleven indicators from BPS Kota Malang were used, covering entrepreneurship, business institutions, human capital, population, commercial infrastructure, the labour market, and industrial activity. Principal Component Analysis summarised the indicators into three components, which explain 77.8% of the variation. The time paths of these components were compared using Dynamic Time Warping, and geographically connected clusters were formed with the SKATER algorithm. Three clusters were identified, which together reduce the dissimilarity between sub-districts by about 80%. Klojen forms a commercial core. Lowokwaru has many MSMEs and schools but weak commercial infrastructure. Blimbing, Kedungkandang, and Sukun form a populous residential and industrial area with more registered job seekers. The distinct position of Klojen was consistent across almost all alternative specifications. No significant spatial autocorrelation was found, although the test has limited power with five sub-districts. The findings suggest that creative economy policies in Malang City should differ by area, and that creative sub-sector data at finer spatial levels are needed.
- 29 October 2026
- Published by Lembaga Publikasi Ilmiah Nusantara in ECOMA: Journal of Economics and Management
- Vol. 4 (4) , 1304-1325
Open AccessRegional Patterns of the Socio-Economic Base of Malang City's Creative Economy: A Spatio-Temporal Clustering Analysis
The creative economy is important for Malang City, but official statistics do not report creative activity at the sub-district level. This study therefore examines the socio-economic base of the creative economy, that is, the local conditions associated with creative activity, and how it differs across the five sub-districts of Malang City over 2022–2025. Eleven indicators from BPS Kota Malang were used, covering entrepreneurship, business institutions, human capital, population, commercial infrastructure, the labour market, and industrial activity. Principal Component Analysis summarised the indicators into three components, which explain 77.8% of the variation. The time paths of these components were compared using Dynamic Time Warping, and geographically connected clusters were formed with the SKATER algorithm. Three clusters were identified, which together reduce the dissimilarity between sub-districts by about 80%. Klojen forms a commercial core. Lowokwaru has many MSMEs and schools but weak commercial infrastructure. Blimbing, Kedungkandang, and Sukun form a populous residential and industrial area with more registered job seekers. The distinct position of Klojen was consistent across almost all alternative specifications. No significant spatial autocorrelation was found, although the test has limited power with five sub-districts. The findings suggest that creative economy policies in Malang City should differ by area, and that creative sub-sector data at finer spatial levels are needed.
- Open Access
- 16 April 2026
- Published by International Academic Press in Statistics, Optimization & Information Computing
- Vol. 16 (3) , 2690-2702
SUR-SAR Modelling of the Human Development Index (HDI) of Regencies and Municipalities in West Java Province, Indonesia
This study examines regional disparities in the Human Development Index (HDI) across 27 regencies and municipalities in West Java Province from 2022 to 2024 using a Spatial Seemingly Unrelated Regression–Spatial Autoregressive (SUR–SAR) model. HDI in West Java exhibits both spatial clustering and temporal persistence, indicating that development outcomes are shaped by interregional interactions and structural continuity across years. To capture these dependencies, the analysis incorporates eight socio-economic variables such as poverty, availability of health facilities, population density, inequality, unemployment, consumption level, GRDP per capita, and regional minimum wage into a multi-equation spatial system estimated using Maximum Likelihood. Four model classes are evaluated sequentially that is OLS, SUR, SAR, and SUR–SAR. The results demonstrate that the SUR–SAR specification provides the best overall fit and effectively accounts for both spatial dependence and inter-year error correlations. Population density consistently emerges as the strongest positive and highly significant determinant of HDI, while poverty shows a stable negative effect across multiple models. Minimum wage becomes significant only within the SUR–SAR framework, indicating that the influence of labour income on human development is more apparent once spatial and temporal linkages are jointly modelled. The spatial lag parameter is positive and significant across all equations, confirming the presence of HDI spillover effects among neighboring regions.
- 16 April 2026
- Published by International Academic Press in Statistics, Optimization & Information Computing
- Vol. 16 (3) , 2690-2702
Open AccessSUR-SAR Modelling of the Human Development Index (HDI) of Regencies and Municipalities in West Java Province, Indonesia
This study examines regional disparities in the Human Development Index (HDI) across 27 regencies and municipalities in West Java Province from 2022 to 2024 using a Spatial Seemingly Unrelated Regression–Spatial Autoregressive (SUR–SAR) model. HDI in West Java exhibits both spatial clustering and temporal persistence, indicating that development outcomes are shaped by interregional interactions and structural continuity across years. To capture these dependencies, the analysis incorporates eight socio-economic variables such as poverty, availability of health facilities, population density, inequality, unemployment, consumption level, GRDP per capita, and regional minimum wage into a multi-equation spatial system estimated using Maximum Likelihood. Four model classes are evaluated sequentially that is OLS, SUR, SAR, and SUR–SAR. The results demonstrate that the SUR–SAR specification provides the best overall fit and effectively accounts for both spatial dependence and inter-year error correlations. Population density consistently emerges as the strongest positive and highly significant determinant of HDI, while poverty shows a stable negative effect across multiple models. Minimum wage becomes significant only within the SUR–SAR framework, indicating that the influence of labour income on human development is more apparent once spatial and temporal linkages are jointly modelled. The spatial lag parameter is positive and significant across all equations, confirming the presence of HDI spillover effects among neighboring regions.
- Open Access
- 13 March 2026
- Published by ARTS Publishing in Science and Technology Indonesia
- Vol. 11 (2) , 569-578
Spatial Data Science for Regional Pattern Analysis: Dynamic Time Warping-Based Clustering of East Java’s Economic Indicators
Motivated by the need to better capture dynamic regional disparities, this study examines spatial and temporal development patterns in East Java, Indonesia, using spatial panel data from 2020 to 2023. A data-driven framework is proposed that integrates Principal Component Analysis (PCA) for dimensionality reduction, Dynamic TimeWarping (DTW) for temporal similarity measurement, and spatially constrained clustering using the SKATER algorithm. PCA compresses multiple socio-economic indicators, GDP growth, GDP level, Human Development Index (HDI), and population density, into a unified development profile, enabling comparison of regional trajectories over time. DTW captures non-linear temporal alignment, while SKATER preserves spatial coherence in cluster formation. The resulting clusters are used to construct an endogenous spatial weight matrix that reflects functional regional relationships rather than purely geographic adjacency. Validation using Moran’s I indicates stronger spatial autocorrelation compared to conventional contiguity-based weights, suggesting improved representation of spatial interaction. Four clusters reveal distinct development patterns and uneven regional trajectories. By integrating dimensionality reduction with temporal alignment and spatial clustering, the proposed approach extends dynamic spatial weighting toward a functional interpretation of regional dependence and offers a transferable framework for spatial data science and regional policy analysis.
- 13 March 2026
- Published by ARTS Publishing in Science and Technology Indonesia
- Vol. 11 (2) , 569-578
Open AccessSpatial Data Science for Regional Pattern Analysis: Dynamic Time Warping-Based Clustering of East Java’s Economic Indicators
Motivated by the need to better capture dynamic regional disparities, this study examines spatial and temporal development patterns in East Java, Indonesia, using spatial panel data from 2020 to 2023. A data-driven framework is proposed that integrates Principal Component Analysis (PCA) for dimensionality reduction, Dynamic TimeWarping (DTW) for temporal similarity measurement, and spatially constrained clustering using the SKATER algorithm. PCA compresses multiple socio-economic indicators, GDP growth, GDP level, Human Development Index (HDI), and population density, into a unified development profile, enabling comparison of regional trajectories over time. DTW captures non-linear temporal alignment, while SKATER preserves spatial coherence in cluster formation. The resulting clusters are used to construct an endogenous spatial weight matrix that reflects functional regional relationships rather than purely geographic adjacency. Validation using Moran’s I indicates stronger spatial autocorrelation compared to conventional contiguity-based weights, suggesting improved representation of spatial interaction. Four clusters reveal distinct development patterns and uneven regional trajectories. By integrating dimensionality reduction with temporal alignment and spatial clustering, the proposed approach extends dynamic spatial weighting toward a functional interpretation of regional dependence and offers a transferable framework for spatial data science and regional policy analysis.
- Open Access
- 10 January 2026
- Published by Pandawa Institute in Journal of Multidisciplinary Applied Natural Science
- Vol. 6 (2) , 553-567
Spatial Clustering with Autocorrelation-Based Weighting for Regional Socio-Economic Pattern Analysis: A Case Study of East Java
Clustering, an unsupervised machine learning technique, categorizes objects into groups based on shared characteristics. When applied to spatial data, the assumption of independence is often violated due to similarities among adjacent regions—a phenomenon known as spatial autocorrelation. To address this, spatial clustering incorporates both non-spatial attributes (e.g., socio-economic indicators) and spatial attributes (e.g., geographic location), with spatial attributes weighted based on their influence in defining clusters. In regional economic development, creating clusters that are both spatially coherent and socio-economically homogeneous is critical for effective policy design. Strong interactions among neighboring regions can promote more integrated and balanced growth. This study proposes a spatial clustering framework that optimizes spatial attribute weighting according to the degree of spatial autocorrelation. A simulation study using 2023 data from East Java’s 38 regencies/municipalities determines optimal weights under varying spatial dependence levels. The results show that optimal spatial weights increase with the number of clusters and vary according to the strength of spatial autocorrelation. Applied to East Java, the method produced clusters with higher socio-economic homogeneity than official zones, though with reduced spatial contiguity. These findings highlight the importance of adaptive, autocorrelation-aware clustering to improve regional planning and support more evidence-based development strategies.
- 10 January 2026
- Published by Pandawa Institute in Journal of Multidisciplinary Applied Natural Science
- Vol. 6 (2) , 553-567
Open AccessSpatial Clustering with Autocorrelation-Based Weighting for Regional Socio-Economic Pattern Analysis: A Case Study of East Java
Clustering, an unsupervised machine learning technique, categorizes objects into groups based on shared characteristics. When applied to spatial data, the assumption of independence is often violated due to similarities among adjacent regions—a phenomenon known as spatial autocorrelation. To address this, spatial clustering incorporates both non-spatial attributes (e.g., socio-economic indicators) and spatial attributes (e.g., geographic location), with spatial attributes weighted based on their influence in defining clusters. In regional economic development, creating clusters that are both spatially coherent and socio-economically homogeneous is critical for effective policy design. Strong interactions among neighboring regions can promote more integrated and balanced growth. This study proposes a spatial clustering framework that optimizes spatial attribute weighting according to the degree of spatial autocorrelation. A simulation study using 2023 data from East Java’s 38 regencies/municipalities determines optimal weights under varying spatial dependence levels. The results show that optimal spatial weights increase with the number of clusters and vary according to the strength of spatial autocorrelation. Applied to East Java, the method produced clusters with higher socio-economic homogeneity than official zones, though with reduced spatial contiguity. These findings highlight the importance of adaptive, autocorrelation-aware clustering to improve regional planning and support more evidence-based development strategies.
- Open Access
- 1 September 2025
- Published by Universitas Pattimura in BAREKENG: Jurnal Ilmu Matematika dan Terapan
- Vol. 19 (4) , 2633-2646
CLUSTERING WITH SKATER METHODS AND UTILIZATION OF LISA ON UNEMPLOYMENT RATE
Spatial cluster analysis is an analysis used to identify a spatial pattern or geographical grouping of data. One method that can be used in spatial cluster analysis is Spatial Cluster Analysis by Tree Edge Removal (SKATER). This research aims to analyze the spatial pattern of the Unemployment Rate in East Java by utilizing the SKATER method. The clustering results are then used to create a weighting matrix, which is used to find local spatial autocorrelation values using the Local Indicators of Spatial Association (LISA) index. The data is taken from BPS East Java with variables including unemployment rate, education level, minimum wage, Human Development Index, and population density. The results show that this approach is able to identify significant local spatial patterns. However, the selection of the number of clusters and input variables proved to be very influential on the results, so care needs to be taken.
- 1 September 2025
- Published by Universitas Pattimura in BAREKENG: Jurnal Ilmu Matematika dan Terapan
- Vol. 19 (4) , 2633-2646
Open AccessCLUSTERING WITH SKATER METHODS AND UTILIZATION OF LISA ON UNEMPLOYMENT RATE
Spatial cluster analysis is an analysis used to identify a spatial pattern or geographical grouping of data. One method that can be used in spatial cluster analysis is Spatial Cluster Analysis by Tree Edge Removal (SKATER). This research aims to analyze the spatial pattern of the Unemployment Rate in East Java by utilizing the SKATER method. The clustering results are then used to create a weighting matrix, which is used to find local spatial autocorrelation values using the Local Indicators of Spatial Association (LISA) index. The data is taken from BPS East Java with variables including unemployment rate, education level, minimum wage, Human Development Index, and population density. The results show that this approach is able to identify significant local spatial patterns. However, the selection of the number of clusters and input variables proved to be very influential on the results, so care needs to be taken.
- 5 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 855-862
Groundwater Quality Prediction Using Deep Neural Networks with Principal Component Analysis Based Feature Reduction and K-Fold Cross Validation
Groundwater quality plays a vital role in meeting domestic, agricultural, and industrial needs. However, the intensification of human activities has led to the degradation of groundwater quality, necessitating the development of accurate and efficient predictive methods. This study aims to develop a groundwater quality prediction model using a DNN optimized with PCA and K-Fold Cross Validation. The dataset comprises various physical and chemical parameters of groundwater collected from Yogyakarta City. Dimensionality reduction through PCA was employed to address data complexity and mitigate the risk of overfitting, while K-Fold Cross Validation was implemented to enhance the model's reliability and generalization capabilities. The findings show that the baseline DNN model attained an accuracy of just 46.63 %. However, after incorporating PCA and K-Fold Cross Validation, its performance rose sharply, reaching an accuracy of 97.67 %. Moreover, precision, recall, and F1-score values were nearly perfect for all groundwater quality classifications, namely compliant, lightly polluted, moderately polluted, and heavily polluted. The best model performance was achieved using Optimizer 2 Model 2 at Fold 3, demonstrating an accuracy of 97.67 % and stable prediction across categories. The study's outcomes indicate that the DNN-PCA-KFold framework offers strong potential for real-time groundwater quality monitoring, enabling early contamination detection and fostering adaptive, data-informed water resource management. Furthermore, the findings pave the way for wider adoption of AI-driven predictive models within the environmental domain.
- 5 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 855-862
Groundwater Quality Prediction Using Deep Neural Networks with Principal Component Analysis Based Feature Reduction and K-Fold Cross Validation
Groundwater quality plays a vital role in meeting domestic, agricultural, and industrial needs. However, the intensification of human activities has led to the degradation of groundwater quality, necessitating the development of accurate and efficient predictive methods. This study aims to develop a groundwater quality prediction model using a DNN optimized with PCA and K-Fold Cross Validation. The dataset comprises various physical and chemical parameters of groundwater collected from Yogyakarta City. Dimensionality reduction through PCA was employed to address data complexity and mitigate the risk of overfitting, while K-Fold Cross Validation was implemented to enhance the model's reliability and generalization capabilities. The findings show that the baseline DNN model attained an accuracy of just 46.63 %. However, after incorporating PCA and K-Fold Cross Validation, its performance rose sharply, reaching an accuracy of 97.67 %. Moreover, precision, recall, and F1-score values were nearly perfect for all groundwater quality classifications, namely compliant, lightly polluted, moderately polluted, and heavily polluted. The best model performance was achieved using Optimizer 2 Model 2 at Fold 3, demonstrating an accuracy of 97.67 % and stable prediction across categories. The study's outcomes indicate that the DNN-PCA-KFold framework offers strong potential for real-time groundwater quality monitoring, enabling early contamination detection and fostering adaptive, data-informed water resource management. Furthermore, the findings pave the way for wider adoption of AI-driven predictive models within the environmental domain.
- Open Access
- 1 April 2025
- Published by Universitas Pattimura in BAREKENG: Jurnal Ilmu Matematika dan Terapan
- Vol. 19 (2) , 961-972
APPLICATION OF DBSCAN FOR CLUSTERING SOCIETY BASED ON WASTE MANAGEMENT BEHAVIOR
This research aims to answer the challenge of identifying the characteristics of the Batu City community in waste management, where traditional clustering techniques are often suboptimal due to the presence of noise or objects that do not fit the general pattern. As a solution, the Density-Based Spatial Clustering of Applications with Noise (DBSCAN) algorithm is applied, which allows the clustering of objects based on local density and detects the presence of noise or outliers in the data. DBSCAN is considered more flexible than other clustering methods, especially in clustering data that is not linear or has a non-uniform distribution. This study successfully identified three clusters of waste management behavior with a silhouette index of 0.875, indicating good cluster quality. The first cluster consists of communities with good environmental quality, active participation in the use of waste banks, and a deep understanding of 3R-based waste management. The second cluster has adequate infrastructure quality and high awareness of the potential economic benefits of waste, while the third cluster displays a pretty good level of understanding of the 3Rs and relatively good environmental quality. The results of this study provide important insights into the differences in waste management characteristics between clusters, with environmental quality proving to be a significant factor in cluster formation.
- 1 April 2025
- Published by Universitas Pattimura in BAREKENG: Jurnal Ilmu Matematika dan Terapan
- Vol. 19 (2) , 961-972
Open AccessAPPLICATION OF DBSCAN FOR CLUSTERING SOCIETY BASED ON WASTE MANAGEMENT BEHAVIOR
This research aims to answer the challenge of identifying the characteristics of the Batu City community in waste management, where traditional clustering techniques are often suboptimal due to the presence of noise or objects that do not fit the general pattern. As a solution, the Density-Based Spatial Clustering of Applications with Noise (DBSCAN) algorithm is applied, which allows the clustering of objects based on local density and detects the presence of noise or outliers in the data. DBSCAN is considered more flexible than other clustering methods, especially in clustering data that is not linear or has a non-uniform distribution. This study successfully identified three clusters of waste management behavior with a silhouette index of 0.875, indicating good cluster quality. The first cluster consists of communities with good environmental quality, active participation in the use of waste banks, and a deep understanding of 3R-based waste management. The second cluster has adequate infrastructure quality and high awareness of the potential economic benefits of waste, while the third cluster displays a pretty good level of understanding of the 3Rs and relatively good environmental quality. The results of this study provide important insights into the differences in waste management characteristics between clusters, with environmental quality proving to be a significant factor in cluster formation.
- 20 January 2025
- Published by Universitas Negeri Semarang in Economics Development Analysis Journal
- Vol. 13 (4)
Spatial Autocorrelation of East Java's Economic Growth Using Cluster-Based Weights
This study incorporates a spatial clustering technique into the formation of a spatial weight matrix as an alternative to the traditional exogenous matrix, aiming to better capture spatial dependencies. The approach is applied to analyze the spatial autocorrelation of economic growth in East Java’s regencies and municipalities using 2019–2021 data. Spatial clusters are identified based on GDP growth (GGDP), Human Development Index (HDI), population density (Dens), and geographical coordinates. These clusters are used to define a customized spatial weight matrix, where regions within the same cluster are designated as neighbors. Moran’s I, calculated using the customized spatial weight matrix, detects significant spatial autocorrelation in GDP growth for all three years, with consistently lower p-values compared to the traditional contiguity-based matrix. For example, in 2020, Moran’s I using the customized matrix yielded a p-value of 0.099 (significant at the 10% level), while the traditional matrix produced a non-significant p-value of 0.7965. These results demonstrate that spatial clustering extends the scope of spatial interaction beyond adjacent regions to include those with similar characteristics. The findings highlight the effectiveness of this method in providing a more nuanced and robust framework for analyzing spatial dependencies in economic growth.
- 20 January 2025
- Published by Universitas Negeri Semarang in Economics Development Analysis Journal
- Vol. 13 (4)
Spatial Autocorrelation of East Java's Economic Growth Using Cluster-Based Weights
This study incorporates a spatial clustering technique into the formation of a spatial weight matrix as an alternative to the traditional exogenous matrix, aiming to better capture spatial dependencies. The approach is applied to analyze the spatial autocorrelation of economic growth in East Java’s regencies and municipalities using 2019–2021 data. Spatial clusters are identified based on GDP growth (GGDP), Human Development Index (HDI), population density (Dens), and geographical coordinates. These clusters are used to define a customized spatial weight matrix, where regions within the same cluster are designated as neighbors. Moran’s I, calculated using the customized spatial weight matrix, detects significant spatial autocorrelation in GDP growth for all three years, with consistently lower p-values compared to the traditional contiguity-based matrix. For example, in 2020, Moran’s I using the customized matrix yielded a p-value of 0.099 (significant at the 10% level), while the traditional matrix produced a non-significant p-value of 0.7965. These results demonstrate that spatial clustering extends the scope of spatial interaction beyond adjacent regions to include those with similar characteristics. The findings highlight the effectiveness of this method in providing a more nuanced and robust framework for analyzing spatial dependencies in economic growth.
- 1 December 2023
- Published by Connect Journals in International Journal of Agricultural and Statistical Sciences
- Vol. 19 (01 (Supp)) , 943-958
A Comprehensive Procedure of Spatial Panel Modelling with R: A study of Agricultural Productivity Growth of the 38 East Java's Regencies/Municipalities
- 1 December 2023
- Published by Connect Journals in International Journal of Agricultural and Statistical Sciences
- Vol. 19 (01 (Supp)) , 943-958
A Comprehensive Procedure of Spatial Panel Modelling with R: A study of Agricultural Productivity Growth of the 38 East Java's Regencies/Municipalities
- Open Access
- 14 November 2023
- Published by Universitas Bina Nusantara in ComTech: Computer, Mathematics and Engineering Applications
- Vol. 14 (2) , 119-127
Fuzzy C-Means in Content-Based Document Clustering for Grouping General Websites Based on Their Main Page Contents
The research aimed to use Fuzzy C-Means clustering in content-based document clustering to classify general websites based on their content. The data used were a table ranking of the most visited websites for Indonesia, taken from https://dataforseo.com/top-1000-websites/ on September 24th, 2022. The research was conducted with two different cases using Fuzzy C-Means clustering, which had two different iteration parameter values, namely 100 and 200 in maximum iteration. The research results on Fuzzy C-Means clustering in content-based document clustering are based on the two cases. These different maximum iteration parameters result in a different amount of website name data in the cluster. They are formed in the first and second clusters only. However, in the other clusters, the numbers are all the same. The results of the cluster research are validated using the silhouette coefficient, with case no. 1 and no. 2 values being 0,977783879 and 0,977788457. The use of Fuzzy C-Means clustering in content-based document clustering has an excellent performance when this method is applied to group general websites based on their content. With that result, content-based clustering can be also applied in other cases. Hence, the results can be considered to be applied to other cases for content-based clustering in the future.
- 14 November 2023
- Published by Universitas Bina Nusantara in ComTech: Computer, Mathematics and Engineering Applications
- Vol. 14 (2) , 119-127
Open AccessFuzzy C-Means in Content-Based Document Clustering for Grouping General Websites Based on Their Main Page Contents
The research aimed to use Fuzzy C-Means clustering in content-based document clustering to classify general websites based on their content. The data used were a table ranking of the most visited websites for Indonesia, taken from https://dataforseo.com/top-1000-websites/ on September 24th, 2022. The research was conducted with two different cases using Fuzzy C-Means clustering, which had two different iteration parameter values, namely 100 and 200 in maximum iteration. The research results on Fuzzy C-Means clustering in content-based document clustering are based on the two cases. These different maximum iteration parameters result in a different amount of website name data in the cluster. They are formed in the first and second clusters only. However, in the other clusters, the numbers are all the same. The results of the cluster research are validated using the silhouette coefficient, with case no. 1 and no. 2 values being 0,977783879 and 0,977788457. The use of Fuzzy C-Means clustering in content-based document clustering has an excellent performance when this method is applied to group general websites based on their content. With that result, content-based clustering can be also applied in other cases. Hence, the results can be considered to be applied to other cases for content-based clustering in the future.