NÇNecla Çakmak

Necla Çakmak

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Necla Çakmak has a total of 35 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    β-Decay Properties of Neutron-Rich Xe, I, and Te Isotopes in the Mass Region A = 120–146

    by Mehmet Dağ, Necla Çakmak

    In this paper, microscopic calculations of the β-decay properties of selected Xe, I, and Te isotopes in the mass region A = 120–146 were performed within the framework of the proton–neutron quasiparticle random-phase approximation (pn-QRPA). The investigated nuclei extend from the vicinity of the valley of stability toward the neutron-rich region. Allowed Gamow–Teller (GT) transitions were calculated within the Schematic Model (SM) by including both particle–particle (pp) and particle–hole (ph) residual interactions, whereas first-forbidden (FF) transitions were treated within the schematic model by considering the particle–hole (ph) channel. Woods–Saxon single-particle energies were adopted as the mean-field basis, and all nuclei were assumed to be spherical. The calculated total β-decay half-lives, logft values, and transition strengths were systematically compared with the available experimental data and previous theoretical calculations. Overall, satisfactory agreement was obtained for both allowed and first-forbidden transitions. The microscopic structure of the calculated GT and FF resonance states was further analysed using their dominant proton–neutron two-quasiparticle configurations and the corresponding pn-QRPA amplitudes, thereby providing additional insight into the origin of the transition strengths. The fulfillment of the Ikeda sum rule confirms the internal consistency of the calculations. This paper also provides theoretical predictions for several transition channels for which experimental information is currently unavailable, offering useful benchmark data for future experimental investigations and nuclear-structure and astrophysical applications.

  • Open Access

    Atmospheric-pressure oxygen plasma as a sustainable approach for waste tire disposal and emission reduction

    by Ramazan Cakmak, Hamiyet Sahin Kol, Ferhat Bozduman, Necla Cakmak

    The continuous increase in the number of land vehicles worldwide has resulted in the accumulation of large quantities of waste tires, posing serious environmental challenges. Conventional disposal methods, such as landfilling or use as fuel in cement kilns, contribute to greenhouse gas emissions and the formation of hazardous pollutants. In this study, atmospheric-pressure oxygen plasma technology is investigated as an alternative and sustainable method for waste tire treatment. The gaseous products generated during the plasma gasification process were analyzed and compared with those produced by conventional combustion. The results demonstrate that plasma treatment significantly reduces CO and CO2 emissions relative to traditional combustion methods. Moreover, an enhanced production of methane was observed during the plasma process, indicating a potential opportunity for energy recovery and improved resource utilization. The relationship between material mass and gas emissions was also examined, revealing that gas emissions increase with increasing sample mass. In addition, plasma treatment was found to substantially reduce ash formation. Overall, the findings highlight that atmospheric-pressure oxygen plasma offers an efficient and environmentally friendly solution for waste tire disposal, combining emission reduction with potential energy recovery.

  • Optical Properties of Tin Oxide Thin Films Before and After Thermal and Fast Neutron Irradiation

    by Abdulrahman Faaiq Dawood Al-Badry, Khalid Hadi Mahdi Aal-Shabeeb, Ulvi Kanbur, Necla Çakmak

    This study investigates the effect of thermal and fast neutrons on the optical properties of a tin oxide (SnO₂) thin film, which was prepared by thermal evaporation in a vacuum. The thickness of the film ranged from 90 to 110 nm. The samples were irradiated using an americium–beryllium (Am–Be) neutron source, providing thermal neutrons (≈0.025 eV) and fast neutrons (≈5 MeV), with a flux of 3x10⁵ n/cm²s. The optical properties of the thin film were examined before and after the irradiation. Before irradiation, the energy gap (E₆) of the film was 3.307 eV. After one week of irradiation with thermal neutrons, the energy gap decreased to 3.259 eV, and after two weeks, it further decreased to 3.217 eV. For fast neutrons, however, the results indicated that the energy gap remained unchanged even after 14 weeks of irradiation. Regarding the transmittance, it was observed to increase with longer irradiation periods by thermal neutrons in the wavelength range from 190 to 686 nm. In comparison, no change was observed for wavelengths longer than 686 nm. For fast neutrons, no significant changes were observed in transmittance, likely because the cross-section of interaction between tin and fast neutrons is much smaller compared to the interaction between tin and thermal neutrons. Absorbance showed an inverse trend relative to transmittance and remained unaffected by fast-neutron irradiation. The behaviour of absorbance was similar to that of reflectivity before and after irradiation. As for the extinction coefficient (Kₒ), it was found to increase with thermal neutron irradiation, while fast neutrons did not affect it.

  • Open Access

    Beta Decay Properties of Waiting-Point N = 50 and 82 Isotopes

    by Necla Çakmak, Najm Abdullah Saleh

    We performed the microscopic calculation of β-decay properties for waiting-point nuclei with neutron-closed magic shells. Allowed Gamow–Teller (GT) and first-forbidden (FF) transitions were simulated using a schematic model (SM) for waiting-point N = 50,82 isotopes in the framework of a proton–neutron quasiparticle random phase approximation (pn-QRPA). The Woods–Saxon (WS) potential basis was used in our calculations. The pn-QRPA equations of allowed (GT) and (FF) transitions were utilized in both the particle–hole (ph) and particle–particle (pp) channels in the SM. We solved the secular equations of the GT and FF transitions for eigenvalues and eigenfunctions of the corresponding Hamiltonians. A spherical shape was assigned to each waiting-point nucleus in all simulations. Significantly, this study marks the first time that β-decay analysis has been applied to certain nuclei, including 82Ge50, 83As50, 84Se50, 85Br50 and 87Rb50 with N=50 isotones, and 132Sn82, 133Sb82, 134Te82, 135I82 and 137Cs82 with N=82 isotones. Since there is no prior theoretical research on these nuclei, this work is a unique addition to the field. We compared our results with the previous calculations and measured data, and our calculations agree with the experimental data and the other theoretical results.


  • Open Access

    Beta Decay Properties of Waiting-Point N=50 and 82 Isotopes

    by Necla Çakmak, Najm Abdullah Saleh

    We have performed the microscopic calculation of β-decay properties for waiting point nuclei with neutron-closed magic shells. Allowed Gamow-Teller (GT), and first-forbidden (FF) transitions have been simulated using a Schematic Model (SM) for waiting-point N=50,82 isotopes in the framework of a proton-neutron quasiparticle random phase approximation ( pn-QRPA). The Woods-Saxon (WS) potential basis has been used in our calculations. The pn-QRPA equations of allowed GT and FF transition have been utilized in both the particle-hole ( ph ) and particle-particle ( pp ) channels in the SM. We solved the secular equations of the GT and FF transitions for eigenvalues and eigenfunctions of the corresponding Hamiltonians. A spherical shape was assigned to each waiting-point nuclei in all simulations. Significantly, this study marks the first time that β-decay analysis has been applied to certain nuclei, including 5082Ge,5083As,5084Se,5085Br and 5087Rb with (N=50 isotones) and 82132Sn,82133Sb,82134Te,82135I and82137Cs with (N=82 isotones). Since there had been no prior theoretical research on these nuclei, this work is a unique addition to the field. We have compared our results with the previous calculations and measured data, and our calculations agree with the experimental data and the other theoretical results.


  • Open Access

    Radon Concentration and its Indices in Bulak (Mencilis) Cave

    by Necla Çakmak, Ulvi Kanbur, Khalid Hadi Mahdi Aal-Shabeeb, Ahmet Mustafa Erer

    The Bulak cave is in the village of Bulak near Safranbolu city. It’s one of the longest caves in Türkiye, which goes 6 kilometers into the inside, but approximately 400 meters are accessible to visitors. You require a professional guide and special equipment to travel further into the cave with lakes, a waterfall, and rivers which are essential for cavers, tourists, and researchers. However, there are possible several health problems for cave visitors. This study mainly aims to measure the radon concentrations with the nuclear track CR-39 detector in the cave environment. Twenty-two detectors were distributed inside the tourist’s area, and another six detectors were in the cave’s deeper region. The exposure time was one month on 24 September 2020, in addition to two soil samples collected from the cave used for medical purposes. These detectors are collected after 30 days and then etched with a chemical solution. The radon concentrations were calculated, which ranged between 16.437 (Bq/m3) and 48.652 (Bq/m3) using an optical microscope from the track density in detectors. The minimum and maximum values of radiation indices AED (mSv/y), LCR (WLM), PAEC (mWL), Dsoft (nGy/h), Dlung (nGy/h) and Heff (nSv/h) are presented, and all results for the radon and radiation indices are within the global limit. Radon concentrations for two soil samples were 26.956 (Bq/m3) and 59.172 (Bq/m3), and all the results were within the acceptable limits recommended by ICRP and UNSCEAR. The XRF examination was performed, which indicated the presence of Fe, Cu, Zn, As, and Mn minerals with high concentrations of 101607, 552, 1337, 237, and 1601 ppm, respectively, which are all more than the world permissible limits. The XRD analyses for the soil sample indicated the presence of clay and non-clay minerals such as Feldspar, Quartz, Gypsum, Calcite, Palygorskite, Kaolinite, and Montmorillonite.


  • DFT calculations of plutonium-doped conical nanocarbons: Exploring structural and electronic features

    by Lina Majeed Haider Al-Haideri, Necla Cakmak, Khalid Hadi Mahdi Aal-Shabeeb, Adil Muala Dhumad

    By the importance of performing investigations on developing characteristic features of nano-based materials for assigning their further applications, this work was done to recognize such features for plutonium (Pu)-doped conical nanocarbons materials. Density functional theory (DFT) calculations were performed for providing information of this work. Three models of conical nanocarbons with disclination angles of 120, 180, and 240 degrees were investigated, in which the Pu atom was doped at the apex of conical structure yielding the models of PuNC120, PuNC180, and PuNC240. Accordingly, formations of four, three, and two PU–C chemical bonds were examined by considering such models systems. The results indicated the PuNC120 with four Pu–C bonds was the distinguished model of this work showing remarkable electronic and conductivity features. As a consequence, the models systems were recognized based on the structural and electronic features to be designated for further applications.

  • β -decay of N = 126 isotones for the r -process nucleosynthesis

    by Jameel-Un Nabi, Necla Çakmak, Asim Ullah, Asad Ullah Khan

    The β -decay properties of nuclei with neutron number N = 126 is investigated in this paper. Two different versions of the proton-neutron quasi particle random phase (pn-QRPA) model were employed to compute β -decay rates and half-lives for the N = 126 isotones. The first set of calculation solves the pn-QRPA equations using the schematic model (SM) approach. The Woods-Saxon potential was employed as a mean-field basis. A spherical shape assigned for each waiting point nuclei throughout all simulations. Both allowed Gamow-Teller (GT) and first-forbidden (FF) transitions were considered in the particle-hole ( ph ) channel. The second set uses the pn-QRPA model in deformed Nilsson basis to calculate β -decay rates for allowed GT and unique first-forbidden (U1F) transitions under terrestrial and stellar conditions. Our results are in agreement with shell model findings that first-forbidden transitions lead to a considerable decrement in the calculated half-lives of the isotones. Inclusion of the first-forbidden contribution led to a decent agreement of our computed terrestrial β -decay half-lives with measured ones, much better than the previous calculations. The possible implication of the waiting point nuclei on r -process nucleosynthesis is discussed briefly.


  • Effect of deformation on gamow-teller strength and electron capture cross-section for chromium isotopes

    by Asim Ullah, Muahmmad Riaz, Jameel-Un Nabi, Mahmut Böyükata, Necla Çakmak

    In this work, we explore the role of deformation parameter (β) on the calculated Gamow-Teller (GT) strength distributions and electron capture cross-sections (ECC) for 46,48,50Cr isotopes within the formalism of the proton neutron-quasi-particle random phase approximation (pn-QRPA). Three different β parameters were used in the present study. Two of them were calculated by using the interacting boson model (IBM) and the macroscopic-microscopic (Mac-mic) models. The third one is the experimental β values obtained by employing its relation with the experimental B(E2)↑ values. The GT strength distributions were widely dispersed among all the daughter states of the given isotopes. They were found to have an inverse relation with the β parameter i.e decreasing with increasing the β value. The ECC was computed as a function of the β parameter and the results suggest that the calculated ECC decreased with decreasing value of the β for the selected cases.