Andrey Morkovkin
Andrey Morkovkin has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Anatoly M. Borisov
Moscow State University
2 shared publications E. S. Mashkova
Moscow State University
2 shared publications- Mikchail A. Ovchinnikov
Skobeltsyn Institute of Nuclear Physics, Moscow State University, Moscow, Russia
2 shared publications Tagir Karamov
2 shared publicationsV. A. Anikin
Moscow Aviation Institute (National Research University)
2 shared publicationsV. A. Kazakov
Moscow Aviation Institute (National Research University)
2 shared publications
Latest Publications
- 30 September 2026
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
Quantitative Scale‐Invariant Analysis of Fracture Surface Roughness in Very‐High‐Cycle Fatigue of LPBF‐Manufactured 316L Stainless Steel
The very‐high‐cycle fatigue behavior of 316L stainless steel produced by laser powder bed fusion was investigated using a multitechnique approach combining infrared thermography, nonlinear acoustic monitoring, X‐ray computed tomography, and quantitative fractography. The primary aim of this study was to establish quantitative links between process‐induced defect characteristics, damage accumulation mechanisms, and fracture surface morphology in the very‐high‐cycle fatigue regime. The fatigue limit was determined via the Risitano–Luong thermographic method (285 ± 10 MPa) and validated by conventional S–N curve analysis (260 MPa). Tomography identified elongated fusion‐related defects (mean size 26 μm, maximum 157 μm) that may have acted as internal crack nucleation sites, leading to subsurface‐initiated cracking with characteristic «fish‐eye» morphology. Scale‐invariant analysis of the fracture surface revealed three distinct zones with progressive increases in the Hurst exponent H (0.40 → 0.66) and in the characteristic scales l sc (0.2 → 1.9 μm) and L pz (11.5 → 27.4 μm), indicating increasingly correlated roughness during crack propagation. These findings demonstrate that quantitative fractography combined with scale‐invariant parameters can effectively capture the transition from short‐range, disorder‐dominated fracture initiation to long‐range, correlated crack growth in additively manufactured metals under very‐high‐cycle fatigue loading.
- 30 September 2026
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
Quantitative Scale‐Invariant Analysis of Fracture Surface Roughness in Very‐High‐Cycle Fatigue of LPBF‐Manufactured 316L Stainless Steel
The very‐high‐cycle fatigue behavior of 316L stainless steel produced by laser powder bed fusion was investigated using a multitechnique approach combining infrared thermography, nonlinear acoustic monitoring, X‐ray computed tomography, and quantitative fractography. The primary aim of this study was to establish quantitative links between process‐induced defect characteristics, damage accumulation mechanisms, and fracture surface morphology in the very‐high‐cycle fatigue regime. The fatigue limit was determined via the Risitano–Luong thermographic method (285 ± 10 MPa) and validated by conventional S–N curve analysis (260 MPa). Tomography identified elongated fusion‐related defects (mean size 26 μm, maximum 157 μm) that may have acted as internal crack nucleation sites, leading to subsurface‐initiated cracking with characteristic «fish‐eye» morphology. Scale‐invariant analysis of the fracture surface revealed three distinct zones with progressive increases in the Hurst exponent H (0.40 → 0.66) and in the characteristic scales l sc (0.2 → 1.9 μm) and L pz (11.5 → 27.4 μm), indicating increasingly correlated roughness during crack propagation. These findings demonstrate that quantitative fractography combined with scale‐invariant parameters can effectively capture the transition from short‐range, disorder‐dominated fracture initiation to long‐range, correlated crack growth in additively manufactured metals under very‐high‐cycle fatigue loading.
- Open Access
- 1 July 2026
- Published by KEAI Publishing in Petroleum Research
Experimental Study of Thermal Impact on Proppant Fracture Under Reservoir Conditions: A Case Study of the Sredny Nazym Oil Shale
- 1 July 2026
- Published by KEAI Publishing in Petroleum Research
Open AccessExperimental Study of Thermal Impact on Proppant Fracture Under Reservoir Conditions: A Case Study of the Sredny Nazym Oil Shale
- Open Access
- 27 March 2026
- Published by Georesursy LLC in Georesursy
- Vol. 28 (1) , 3-18
Mean Velocity Calculation for Single-Phase Flow in Porous Media Based on Minkowski Functionals
Studies of flow dynamics in complex disordered media are very important in many practical areas, such as materials science, soil science, groundwater engineering, chemical engineering, and especially petroleum and gas engineering. Integral geometry methods are a useful tool for studying complex media. In this work, it is shown that, for a given porous media class, the by-layer mean flow velocity for any sample within the same class can be characterized as a function of Minkowski functionals, allowing to avoid costly natural core flood experiments or numerical simulation for screening purposes. This paper proposes the flow characterization method based on integral geometry. This method allows for obtaining the single-phase fluid flow velocity characterization models across a wide range of porous media classes for a quick estimation of the mean by-layer velocity distribution purely by extracting the geometrical measures from binary sample images. Samples from gas reservoirs are chosen as the relevant porous media examples, with regard to the growing importance of this type of reservoir caused by the global shift towards natural gas as a key energy source. Direct comparison with numerical simulation based on Stokes equation was made with commercial class software. The results demonstrate that the proposed algorithm has a relatively high degree of statistical significance and closely captures mean velocity trends. That provides a useful tool for quick, robust modelling for screening, agile calculations, and upscaling tasks.
- 27 March 2026
- Published by Georesursy LLC in Georesursy
- Vol. 28 (1) , 3-18
Open AccessMean Velocity Calculation for Single-Phase Flow in Porous Media Based on Minkowski Functionals
Studies of flow dynamics in complex disordered media are very important in many practical areas, such as materials science, soil science, groundwater engineering, chemical engineering, and especially petroleum and gas engineering. Integral geometry methods are a useful tool for studying complex media. In this work, it is shown that, for a given porous media class, the by-layer mean flow velocity for any sample within the same class can be characterized as a function of Minkowski functionals, allowing to avoid costly natural core flood experiments or numerical simulation for screening purposes. This paper proposes the flow characterization method based on integral geometry. This method allows for obtaining the single-phase fluid flow velocity characterization models across a wide range of porous media classes for a quick estimation of the mean by-layer velocity distribution purely by extracting the geometrical measures from binary sample images. Samples from gas reservoirs are chosen as the relevant porous media examples, with regard to the growing importance of this type of reservoir caused by the global shift towards natural gas as a key energy source. Direct comparison with numerical simulation based on Stokes equation was made with commercial class software. The results demonstrate that the proposed algorithm has a relatively high degree of statistical significance and closely captures mean velocity trends. That provides a useful tool for quick, robust modelling for screening, agile calculations, and upscaling tasks.
- Open Access
- 1 December 2025
- Published by KEAI Publishing in Petroleum Research
- Vol. 10 (4) , 936-953
The role of thermophysical analysis in laboratory petrophysical core studies: An example from Saurashtra Basin rocks, India
- 1 December 2025
- Published by KEAI Publishing in Petroleum Research
- Vol. 10 (4) , 936-953
Open AccessThe role of thermophysical analysis in laboratory petrophysical core studies: An example from Saurashtra Basin rocks, India
- Open Access
- 1 October 2024
- Published by KEAI Publishing in Petroleum Science
- Vol. 21 (5) , 3363-3378
Exploring in-situ combustion effects on reservoir properties of heavy oil carbonate reservoir
- 1 October 2024
- Published by KEAI Publishing in Petroleum Science
- Vol. 21 (5) , 3363-3378
Open AccessExploring in-situ combustion effects on reservoir properties of heavy oil carbonate reservoir
- 1 July 2018
- Published by Pleiades Publishing Ltd in Journal of Surface Investigation: X-Ray, Synchrotron and Neutron Techniques
- Vol. 12 (4) , 801-806
Effect of High-Fluence Ion Irradiation on the Structure and Electrical Properties of Polycrystalline Diamond
The results of experimental investigation of the surface layer of polycrystalline diamond modified by high-fluence (≥1018 cm–2) 30-keV Ar+ion irradiation are presented. The reflection high-energy...
- 1 July 2018
- Published by Pleiades Publishing Ltd in Journal of Surface Investigation: X-Ray, Synchrotron and Neutron Techniques
- Vol. 12 (4) , 801-806
Effect of High-Fluence Ion Irradiation on the Structure and Electrical Properties of Polycrystalline Diamond
The results of experimental investigation of the surface layer of polycrystalline diamond modified by high-fluence (≥1018 cm–2) 30-keV Ar+ion irradiation are presented. The reflection high-energy...
- 1 November 2017
- Published by Pleiades Publishing Ltd in Journal of Surface Investigation: X-Ray, Synchrotron and Neutron Techniques
- Vol. 11 (6) , 1185-1191
Graphitization of a Polycrystalline Diamond under High-Fluence Irradiation with Noble Gas and Nitrogen Ions
To analyze the process of the ion-induced graphitization of a polycrystalline diamond, the surfacelayer conductivity and microstructure are studied experimentally after high-fluence irradiation with...
- 1 November 2017
- Published by Pleiades Publishing Ltd in Journal of Surface Investigation: X-Ray, Synchrotron and Neutron Techniques
- Vol. 11 (6) , 1185-1191
Graphitization of a Polycrystalline Diamond under High-Fluence Irradiation with Noble Gas and Nitrogen Ions
To analyze the process of the ion-induced graphitization of a polycrystalline diamond, the surfacelayer conductivity and microstructure are studied experimentally after high-fluence irradiation with...